How To Perform Lot Split Transactions Using Transaction Open Interface (MTI)

Can anyone give me some guidance on how to perform lot split transaction using MTI?
I am using the following code:
DECLARE
l_transaction_type_id NUMBER := 83;
l_transaction_action_id NUMBER := 41;
l_transaction_source_type_id NUMBER := 13;
l_org_id NUMBER := 1884;
l_txn_header_id NUMBER;
l_txn_if_id1 NUMBER;
l_txn_if_id2 NUMBER;
l_txn_if_id3 NUMBER;
l_parent_id NUMBER;
l_sysdate DATE;
l_item_id NUMBER :=287996;
l_user_id NUMBER;
l_distribution_account_id NUMBER;
l_exp_date DATE;
BEGIN
--For Lot Merge, there should be only one resultant lot.
--The transaction_quantity populated in MTI/MTLI should be the entire
--quantity that is available to transact for the org/sub/item/locator/LPN in
--that particular lot number.
--Get transaction_header_id for all the MTIs
SELECT APPS.mtl_material_transactions_s.NEXTVAL
INTO l_txn_header_id
FROM sys.dual;
--Get transaction_interface_id of resultant record
SELECT APPS.mtl_material_transactions_s.NEXTVAL
INTO l_txn_if_id1
FROM sys.dual;
l_parent_id := l_txn_if_id1;
l_sysdate := SYSDATE;
l_user_id := -1; --substitute with a valid user_id
l_distribution_account_id := NULL; --needed for lot translate
l_exp_date := NULL; --set if required
--Populate the MTI record for resultant record
INSERT INTO MTL_TRANSACTIONS_INTERFACE
transaction_interface_id,
transaction_header_id,
Source_Code,
Source_Line_Id,
Source_Header_Id,
Process_flag,
Transaction_Mode,
Lock_Flag,
Inventory_Item_Id,
revision,
Organization_id,
Subinventory_Code,
Locator_Id,
Transaction_Type_Id,
Transaction_Source_Type_Id,
Transaction_Action_Id,
Transaction_Quantity,
Transaction_UOM,
Primary_Quantity,
Transaction_Date,
Last_Update_Date,
Last_Updated_By,
Creation_Date,
Created_By,
distribution_account_id,
parent_id,
transaction_batch_id,
transaction_batch_seq,
lpn_id,
transfer_lpn_id
VALUES
l_txn_if_id1, --transaction_header_id
l_txn_header_id, --transaction_interface_id
'INV', --source_code
-1, --source_header_id
-1, --source_line_id
1, --process_flag
3, --transaction_mode
2, --lock_flag
l_item_id, --inventory_item_id
null, --revision
l_org_id, --organization_id
'EACH', --subinventory_code
1198, --locator_id
l_transaction_type_id, --transaction_type_id
l_transaction_source_type_id, --transaction_source_type_id
l_transaction_action_Id, --l_transaction_action_id
100000, --transaction_quantity
'EA', --transaction_uom
100000, --primary_quantity
l_sysdate, --Transaction_Date
l_sysdate, --Last_Update_Date
l_user_id, --Last_Updated_by
l_sysdate, --Creation_Date
l_user_id, --Created_by
l_distribution_account_id, --distribution_account_id
l_parent_id, --parent_id
l_txn_header_id, --transaction_batch_id
2, --transaction_batch_seq
NULL, --lpn_id (for source MTI)
NULL --transfer_lpn_id (for resultant MTIs)
--Insert MTLI corresponding to the resultant MTI record
INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE(
transaction_interface_id
, Source_Code
, Source_Line_Id
, Process_Flag
, Last_Update_Date
, Last_Updated_By
, Creation_Date
, Created_By
, Lot_Number
, lot_expiration_date
, Transaction_Quantity
, Primary_Quantity
VALUES (
l_txn_if_id1 --transaction_interface_id
, 'INV' --Source_Code
, -1 --Source_Line_Id
, 'Y' --Process_Flag
, l_sysdate --Last_Update_Date
, l_user_id --Last_Updated_by
, l_sysdate --Creation_date
, l_user_id --Created_By
, 'Q0000.1' --Lot_Number
, l_exp_date --Lot_Expiration_Date
, 100000 --transaction_quantity
, 100000 --primary_quantity
INSERT INTO MTL_TRANSACTIONS_INTERFACE
transaction_interface_id,
transaction_header_id,
Source_Code,
Source_Line_Id,
Source_Header_Id,
Process_flag,
Transaction_Mode,
Lock_Flag,
Inventory_Item_Id,
revision,
Organization_id,
Subinventory_Code,
Locator_Id,
Transaction_Type_Id,
Transaction_Source_Type_Id,
Transaction_Action_Id,
Transaction_Quantity,
Transaction_UOM,
Primary_Quantity,
Transaction_Date,
Last_Update_Date,
Last_Updated_By,
Creation_Date,
Created_By,
distribution_account_id,
parent_id,
transaction_batch_id,
transaction_batch_seq,
lpn_id,
transfer_lpn_id
VALUES
l_txn_if_id1, --transaction_header_id
l_txn_header_id, --transaction_interface_id
'INV', --source_code
-1, --source_header_id
-1, --source_line_id
1, --process_flag
3, --transaction_mode
2, --lock_flag
l_item_id, --inventory_item_id
null, --revision
l_org_id, --organization_id
'EACH', --subinventory_code
1198, --locator_id
l_transaction_type_id, --transaction_type_id
l_transaction_source_type_id, --transaction_source_type_id
l_transaction_action_Id, --l_transaction_action_id
100000, --transaction_quantity
'EA', --transaction_uom
100000, --primary_quantity
l_sysdate, --Transaction_Date
l_sysdate, --Last_Update_Date
l_user_id, --Last_Updated_by
l_sysdate, --Creation_Date
l_user_id, --Created_by
l_distribution_account_id, --distribution_account_id
l_parent_id, --parent_id
l_txn_header_id, --transaction_batch_id
3, --transaction_batch_seq
NULL, --lpn_id (for source MTI)
NULL --transfer_lpn_id (for resultant MTIs)
--Insert MTLI corresponding to the resultant MTI record
INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE(
transaction_interface_id
, Source_Code
, Source_Line_Id
, Process_Flag
, Last_Update_Date
, Last_Updated_By
, Creation_Date
, Created_By
, Lot_Number
, lot_expiration_date
, Transaction_Quantity
, Primary_Quantity
VALUES (
l_txn_if_id1 --transaction_interface_id
, 'INV' --Source_Code
, -1 --Source_Line_Id
, 'Y' --Process_Flag
, l_sysdate --Last_Update_Date
, l_user_id --Last_Updated_by
, l_sysdate --Creation_date
, l_user_id --Created_By
, 'Q0000.1' --Lot_Number
, l_exp_date --Lot_Expiration_Date
, 100000 --transaction_quantity
, 100000 --primary_quantity
--Get transaction_interface_id of Source record-1
SELECT APPS.mtl_material_transactions_s.NEXTVAL
INTO l_txn_if_id2
FROM sys.dual;
--Populate the MTI record for Source record-1
INSERT INTO MTL_TRANSACTIONS_INTERFACE
transaction_interface_id,
transaction_header_id,
Source_Code,
Source_Line_Id,
Source_Header_Id,
Process_flag,
Transaction_Mode,
Lock_Flag,
Inventory_Item_Id,
revision,
Organization_id,
Subinventory_Code,
Locator_Id,
Transaction_Type_Id,
Transaction_Source_Type_Id,
Transaction_Action_Id,
Transaction_Quantity,
Transaction_UOM,
Primary_Quantity,
Transaction_Date,
Last_Update_Date,
Last_Updated_By,
Creation_Date,
Created_By,
distribution_account_id,
parent_id,
transaction_batch_id,
transaction_batch_seq,
lpn_id,
transfer_lpn_id
VALUES
l_txn_if_id2, --transaction_header_id
l_txn_header_id, --transaction_interface_id
'INV', --source_code
-1, --source_header_id
-1, --source_line_id
1, --process_flag
3, --transaction_mode
2, --lock_flag
l_item_id, --inventory_item_id
null, --revision
l_org_id, --organization_id
'EACH', --subinventory_code
1198, --locator_id
l_transaction_type_id, --transaction_type_id
l_transaction_source_type_id, --transaction_source_type_id
l_transaction_action_Id, --transaction_action_id
-200000, --transaction_quantity
'EA', --transaction_uom
-200000, --primary_quantity
l_sysdate, --Transaction_Date
l_sysdate, --Last_Update_Date
l_user_id, --Last_Updated_by
l_sysdate, --Creation_Date
l_user_id, --Created_by
l_distribution_account_id, --distribution_account_id
l_parent_id, --parent_id
l_txn_header_id, --transaction_batch_id
1, --transaction_batch_seq
NULL, --lpn_id (for source MTI)
NULL --transfer_lpn_id (for resultant MTIs)
--Insert MTLI corresponding to the Source record-1
INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE(
transaction_interface_id
, Source_Code
, Source_Line_Id
, Process_Flag
, Last_Update_Date
, Last_Updated_By
, Creation_Date
, Created_By
, Lot_Number
, lot_expiration_date
, Transaction_Quantity
, Primary_Quantity
VALUES (
l_txn_if_id2 --transaction_interface_id
, 'INV' --Source_Code
, -1 --Source_Line_Id
, 'Y' --Process_Flag
, l_sysdate --Last_Update_Date
, l_user_id --Last_Updated_by
, l_sysdate --Creation_date
, l_user_id --Created_By
, 'Q0000' --Lot_Number
, l_exp_date --Lot_Expiration_Date
, -200000 --transaction_quantity
, -200000 --primary_quantity
END;

the first MTI record should be the source record ...ie. it should have transaction quantity as negative.
new set of MTI records should have positive transaction quantities.
Also ensure that sum of transaction quantities for the set should be 0...
What is the error that you are getting?
Thanks,
Hrishi.

Similar Messages

How to update an existing supplier using Supplier Open Interface Import?

Hi
I need to updated an existing supplier.
Is it possible to update using supplier open interface import and how?
Thanks in advance.
Thanks,
Mallesh

Hi Atul,
I am using CCM 2.0 and SRM 5.0 (EBP5.5).
We are not using XI, so i guess we cant use the program "/ccm/file_upload".
we have migrated the product master data from R/3.
We have developed a report which takes product category as input and gives out flat file in csv format containg all the items in that prod category.
Then we upload the file in CCM by logging thro the brpwser.
Similarly, i can develop another program which will give me a CSV file foll all those items changed in R/3 in a day.
Then we can upload that file in CCM.
But i have doubt if it will update the existing items in catalog.
Hope I could make myself clear.
Thanks
Abhishek

How to know what CBO programs uses transaction codes

Hello Everyone,
How to know what CBO programs uses transaction codes?
Thanks for the help!

Hi,
Please clarify your question ....
for e.g. give program name

Importing Items using Items Open Interface

Hi ,
I am creating items using Items Open interface program. I have populated the data in the MTL_SYSTEM_ITEMS_INTERFACE. Itemcode, oganization, primary_uom and template id and getting the following error.
TRANSACTION ID : 18739
ORGANIZATION ID : 103
TABLE NAME : MTL_ITEM_REVISIONS_INTERFACE
COLUMN NAME : ITEM_ID
MESSAGE NAME : INV_IOI_REV_NO_ITEM
ERROR MESSAGE : The revision entered is for an item that does not exist in MTL_SYSTEM_ITEMS nor MTL_SYSTEM_ITEMS_INTERFACE.
Item is not revision control and them same is in the template also. still system is giving this error. Whats needs to be done.
Regards/Prasanth

@ ABOVE ALL
Hi all,
Please see this document from meta-link,most probably it WILL solve your problem.
Note: 801354.1 INV_IOI_REV_NO_ITEM Error - The revision entered is for an item that does not exist
else you can refer following doc from meta-link
Note: 268968.1 Understanding Item Import and Debugging Problems with Item Import
Hope this helps. :)
Regards,
-sDJ

Loading bank accounts with invoices using Payables Open Interface Import

Dear Gurus,
We are on 11.5.10.2.
We create invoices in the 3rd party system, then load them into oracle using payables open interface import process.
When users create invoices, they choose Vendor and Site first. If the Vendor Site has multiple bank accounts assigned, users may select the one that is non-primary.
When we load the invoices into Oracle, it finds the PRIMARY account for the particular vendor site, and assigns it to the invoice.
Is it possible to load bank accounts assigned to invoices into Oracle AP?
Many Thanks,
Iana

Hi,
No issues for me on Payables Open Invoice Interface with 12.0.6 - and yes make sure you match up the invoice_id on invoice, lines interface tables.
Regards,
Gareth

How to define the application to use for opening each file type (pdf, jpg,...)

I installed an external application, and this new application has been configured by defect that it will be used to open all files with extensions like jpg, pdf, etc...
I want to revert this situation and define again the proper application I want to use for opening each file type. How can I do this in Lion?
Thanks,
Azaldier

Pick a representative file.
Get info. (Command-i)
There you will see a place "Open with" where you can select the application for that file.
Hit the "Change all..." button to do this for all files of this type.
charlie

How to tell firefox to always use xdg-open?

Firefox has always been a pain when it comes to file associations. It's very annoying to specify which program I want to open a specific file type everytime - especially when I have to find the program in /usr/bin every time. Is there any way to make firefox use xdg-open or exo-open for ANY file type?

By modifying the source code? Should be easy to do. Or maybe there is a patch for this somewhere (but I haven't found one when I was looking for it).

Use of open interface tables in R12

Hello,
Can someone tell me the status of using open interface tables in release 12. Is this still a supported mechanism for importing data into the product, or must you use a PL/SQL/Java API, XML gateway etc?
iREP for 11.5.10 lists these open interface tables, but they are missing from the embedded iREP in R12. However, looking in the database for the RA_CUSTOMERS_INTERFACE_ALL shows that the tables exists. Is it supported to still use open interface tables, or are they just there for legacy upgrade purposes? If it is supported, where is the documentation for these R12 open interface tables?
I wish to integrate into various modules using Oracle Data Integrator and it seems to only have 'integration knowledge modules' to support open interface tables.
i look forward to your response.
Cheers,
John

Hi Helios,
Thanks for your response. Two of the links do not work.
All I really need to know for sure is that R12 supports open interface tables.
Perhaps I didn't use the embedded R12 iRep correctly - the standard view by product family certainly didn't show any open interface table, and they did not appear in the 'interface type' drop down list. However, I notice from an example on the web that you can pivot the results by interface type. I will try that when the environment becomes available again.
cheers,
John

How to get unique Batch Name for AP Open Interface Import Program

Hi,
We have enabled the invoice batch controls i.e. the profile option 'AP: Use Invoice Batch Controls' set to Yes.
We have an interface with some system from where we receive a data file that has AP invoices. The invoices are loaded into staging table, and finally into AP invoice interface tables. After this the AP Open interface import is run.
The relevant programs are in a concurrent request set and are executed every day.
The issue is with the 'Batch Number' parameter of the Payables Open Interface Import Program. If I enter some text as the batch number, the Batch gets created with that name only. As such we need the Batch number to be unique for each job run.
Oracle help says "If the AP: Use Invoice Batch Controls profile option is enabled and if you provide no value for this parameter then the system provides a value for you. The value the system provides is the concatenation of the Source and a unique sequential number. For example, ERS: 1234".
However the problem is the Batch Name Parameter is mandatory, and cannot be left NULL.
Has any one faced this issue earlier? Am I missing any setup or step?
Any inputs in this regard would be highly appreciated!
Best regards,
Anand

The proper Oracle suggested method would be to put a wrapper program around your request set that determines the batch name.
The easier (abet less supported) method:
CREATE OR REPLACE TRIGGER custom.coop_ap_batches_all_insert
BEFORE
INSERT
ON ap.ap_batches_all
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
-- to update batch name...
-- created so that the nightly batches can have unique names by date
-- nightly batches will be created with their simple name
-- IE VIR, DI, MI, etc... this trigger will rename them
-- to YYYY-MM-DD-VIR, YYYY-MM-DD-DI, YYYY-MM-DD-MI, etc...
IF LENGTH(TRIM(:new.batch_name)) < 4 THEN
:new.batch_name := TO_CHAR(SYSDATE,'YYYY-MM-DD') || '-' || :new.batch_name;
END IF;
:new.batch_name := UPPER(:new.batch_name);
END;
/

How to perform authentication on proxy using utl_http package?

Hi,
I am using Oracle 8i database (ver:8.1.7). I want to use the utl_http package to perform http requests. Within my company, I am forced to use a proxy and I have to be authenticated on that proxy. How can I authenticate myself on the proxy using utl_http.request function on Oracle 8i?
Thanks a lot.
Paulo.

UTL_HTTP
The UTL_HTTP package makes Hypertext Transfer Protocol (HTTP) callouts from SQL and PL/SQL. You can use it to access data on the Internet over HTTP.
With UTL_HTTP, you can write PL/SQL programs that communicate with Web (HTTP) servers. UTL_HTTP also contains a function that can be used in SQL queries. The package also supports HTTP over the Secured Socket Layer protocol (SSL), also known as HTTPS, directly or through an HTTP proxy. Other Internet-related data-access protocols (such as the File Transfer Protocol (FTP) or the Gopher protocol) are also supported using an HTTP proxy server that supports those protocols.
When the package fetches data from a Web site using HTTPS, it requires Oracle Wallet Manager to set up an Oracle wallet. Non-HTTPS fetches do not require an Oracle wallet.
See Also:
Chapter 102, "UTL_URL"
Chapter 100, "UTL_SMTP"
Oracle Advanced Security Administrator's Guide for more information on Wallet Manager
This chapter discusses the following topics:
UTL_HTTP Constants, Types and Flow
UTL_HTTP Exceptions
UTL_HTTP Examples
Summary of UTL_HTTP Subprograms
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/u_http.htm#ARPLS070
Joel P�rez

Pass Parameter to a Transaction Using Transaction Iview Portal

Dear Experts.
I have the following doubt:
The developer ABAP created a program Z_PROGRAM_ABAP
and a T.Code Z_CODE_PROGRAM for this program.
I have created a Transaction Iview in the portal for this transaction, but I need pass a value in the Iview to a variable in the program that call this transaction.
How can pass a paramete to a variable in the program that is called with the transaction Z_CODE_PROGRAM?
Thank In advance for your help.
Best Regards
Carmen G.

Hi .
I have the following code:
REPORT Z_PROGRAM_ABAP.
   parameters: XYZ type Char no-display.
if XYZ = 1.
Write 'ABC'.
else.
Write 'MNO'.
endif.
And in the portal:
Application Parmeter    : XYZ = 1
Parameters Forwarded: 1
The problem is that i not want that the user can see the parameter XYZ in the Sreen. When I delete the NO-DISPLAY of the sentence    parameters: XYZ type Char no-display, the parameter is passed.
How can solve this issue?
Best Regards
Carmen

Pass paremeter to VD03 transaction using Transaction Launcher

Hello experts,
I have a requirement to pass the confirmed account id to VD03 transaction when i click on launch transaction VD03. I have configured the transaction launcher to launch VD03 transaction.
Please let me know the steps.
Thanks
Ramakrishna

Hi .
I have the following code:
REPORT Z_PROGRAM_ABAP.
   parameters: XYZ type Char no-display.
if XYZ = 1.
Write 'ABC'.
else.
Write 'MNO'.
endif.
And in the portal:
Application Parmeter    : XYZ = 1
Parameters Forwarded: 1
The problem is that i not want that the user can see the parameter XYZ in the Sreen. When I delete the NO-DISPLAY of the sentence    parameters: XYZ type Char no-display, the parameter is passed.
How can solve this issue?
Best Regards
Carmen

How do you perform partial word search using PDF Open Parameters?

Hello,
We are using the 'search=' open parameter in the URL string, which open a PDF and automatically searches for a word within the PDF. It works great for whole word searches. Unfortunately, it does not work for partial word, or phrases. In other words, if I'm searching on '123456' and there is a word in the document that is '1234567', it will not find the partial word, or first 6 characters of the 7 character word. You can perform a partial or phrased search using the advance search feature of Adobe Reader. So, currently after the PDF opens, and shows no hits on the automatic search for '123456', we are able to manually search again for a partial word search, and then see matches in the document. Is there any way to specify to use a whole or partial word search when using the 'search=' open parameter, so that we can automatically match on partial and whole words? Something like 'search=123456*'?

It never worked that way. Command-F shows the page search bar.

How to create a form which uses graphical user interfaces(GUI) features.

i'm working as a administrator in a private college..i have some problem..
how to create a student registration form that uses most of the graphical user interfaces(GUI) features. The form should consist of the following features:- Label, Button, Check box, Radio Button, List, Panel and Layout. The GUI features must be functional.
how to write that programme in JAVA ?
please help me to get the code..

So are you saying that this person is legitamately asking for someone to write up this student registration form, for use in some sort of production student registration application? Ok, if so, I apologize for jumping to the wrong conclusion. But, to me it sounds like a student hit the "Using Swing" chapter in the text and was given the following assignment:
For this assignment you are working as an administrator in a private college and you need to solve the following problem:
You need to create a student registration form that uses most of the graphical user interfaces(GUI) features. The form should consist of the following features:- Label, Button, Check box, Radio Button, List, Panel and Layout. The GUI features must be functional.
You have two weeks.
Now, I suppose that I could be wrong, if so, I apologize and go with the previous poster that said ask a comp sci student to do this for you.
Lee

How to execute a sequence without using an User Interface

Hi,
I have programatically generated a TestStand Sequence File. I used C# and the TestStand API. I opened the .seq file in the default TestStand User Interface and the Sequence File runs perfectly.
However, when I created a NewExecution using the Engine object created in the porgram, it seems that the sequence never starts execution. Please look at the following code snippet:
// TSStep and TSSequence was created before
TSSequence.InsertStep(TSStep, 0, StepGroups.StepGroup_Main); SequenceFile TSSequenceFile = TSEngine.NewSequenceFile();
TSSequenceFile.InsertSequenceEx(0, TSSequence);
TSSequenceFile.Save("SeqGen.seq"); Execution TSExecution = TSEngine.NewExecution(TSSequenceFile, "Seq_0", null, false, ExecutionTypeMask.ExecTypeMask_Normal, System.Type.Missing, System.Type.Missing, System.Type.Missing);while (TSSequenceFile.IsExecuting == true) ; // this flag never changes to false
TSEngine.ReleaseSequenceFileEx(TSSequenceFile, 0);
I know the sequence is not being executed because a COM Server (written as a Local Server in a .EXE) should start when the step within the sequence be executed.
Any ideas why the sequence is not executing properly ?
PacSoft

Hi Pacsoft,
Check out this example,
I posted it in a former thread.
Note: Also downloaded the .seq from the former thread! NEVER acept savings to Ni. -INI files !!!
Greetings
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
ConsoleApplication2.zip ‏55 KB

How To Perform Lot Split Transactions Using Transaction Open Interface (MTI)

Similar Messages

Maybe you are looking for