How To Perform The Same Edit And Crop To Multiple Images?
On just one image this would be a no brainer, I'd just use the paint brush or similar tool to wipe over a section I want covered and use the crop tool to get the image size and position I'm after. The thing is though, I'd like to do the same edit and crop to a series of photos to keep them all consistent and it's beyond me how to do that in PS5. When I look at help I find tips on using scripts, batch processing or stacking images that seem to defy the English language and don't address the two simple little things I want to do to these images.
Can anyone explain, or point me to a resource, that could help me accomplish what I'd like to think should be a simple task for such an expensive program?
Greg
You could use a "clipper" document to isolate the globe in each image.
Create a clipper doc which is the size of the images in the globe series and which contains only a layer with a silhouette of the globe surrounded by transparency.
Make an Action which will copy the current image and close it, paste into the already open clipper doc, clip that image layer to the silhouette layer, crop/trim, export a file then revert the clipper doc to its initial state of just the silhouette ready for processing the next image in the batch. For example:
1. Select All
2. Copy
3. Close
4. Paste
5. Create Clipping Mask
6. Trim based on transparent pixels
7. Save As
8. Revert
Open the clipper doc then set up Batch so the output files are named with a serial number.
Similar Messages
-
How to retain the same resolution while croping a tiff image using jai api
Hi all,
I have designed a program to crop a tiff image.But after croping the tiff,the resultant file resolution is not the same as the original source file.
In the program,the source file Nadeshiko_v1_02.tif has the resolution(X) of 1200 DPI and resolution(Y) has 1200 DPI pixels.
But after croping the resolution of output file is 100 DPI.
Please give me some idea on how to retain the same resolution.
<code>
package jai;
import java.awt.Frame;
import java.awt.image.RenderedImage;
import java.awt.image.renderable.ParameterBlock;
import java.awt.image.renderable.RenderableImage;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import javax.imageio.*;
import javax.imageio.stream.ImageOutputStream;
import javax.media.jai.Interpolation;
import javax.media.*;
import javax.media.jai.JAI;
import javax.media.jai.PlanarImage;
import javax.media.jai.RenderedOp;
import javax.media.jai.widget.ScrollingImagePanel;
import com.sun.media.jai.codec.FileSeekableStream;
import com.sun.media.jai.codec.SeekableStream;
import com.sun.media.jai.codec.TIFFEncodeParam;
import javax.media.jai.OperationDescriptorImpl;
import java.io.*;
import java.util.Iterator;
import javax.media.jai.operator.*;
// import javax.media.jai.widget.ScrollingImagePanel;
public class crop {
/** The main method. */
public static void main(String[] args) {
/* Validate input. */
/* if (args.length != 1) {
System.out.println("Usage: java JAISampleProgram " +
"input_image_filename");
// System.exit(-1);
float a=(float) 70.3;
float b=(float) 70.4;
float c=(float) 3100.3;
float d=(float) 5522.4;
* Create an input stream from the specified file name
* to be used with the file decoding operator.
String TIFF="TIFF";
FileSeekableStream stream = null;
try {
stream = new FileSeekableStream("D:\\tif images\\Nadeshiko_v1_02.tif");
// stream = new FileSeekableStream("D:\\tif images\\Nadeshiko_v1_01.jpg");
} catch (IOException e) {
e.printStackTrace();
System.exit(0);
// Load the source image from a Stream.
RenderedImage im = JAI.create("stream", stream);
RenderedImage image2= CropDescriptor.create(im, a, b, c, d, null);
ScrollingImagePanel panel = new ScrollingImagePanel(image2, 100, 100);
// Create a frame to contain the panel.
Frame window = new Frame("JAI Image Cropping");
window.add(panel);
window.pack();
// window.show();
// Define the source and destination file names.
// String inputFile = "D:\\tif images\\Nadeshiko_v1_05.tif";
String outputFile = "D:\\tif images\\Nadeshiko_v1_04.tif";
// Save the image on a file. We cannot just store it, we must set the image encoding parameters
// to ensure that it will be stored as a tiled image.
TIFFEncodeParam tep = new TIFFEncodeParam();
tep.setWriteTiled(true);
tep.setTileSize(80,80);
JAI.create("filestore",image2,outputFile,"TIFF",null);
try {
stream.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
</code>
Thanks,
Sanat MeherTry the following,
TIFFEncodeParam tep = new TIFFEncodeParam();
// Create {X,Y}Resolution fields.
TIFFField fieldXRes = new TIFFField(0x11A, TIFFField.TIFF_RATIONAL,
1, new long[][] {{DPI_X, 1}});
TIFFField fieldYRes = new TIFFField(0x11B, TIFFField.TIFF_RATIONAL,
1, new long[][] {{DPI_Y, 1}});
tep.setExtraFields(new TIFFField[] {fieldXRes, fieldYRes}); -
Applying the same layers and effects to different images
I have images of a cube that are different colors, but same
dimensions. I import one by one onto my stage in Flash CS3 and then
apply some alpha lighting and glow effects. There has got to be a
more efficient way to do apply the same effects over and over
instead of how I'm doing it now which seems very tedious?? I'm
looking for a similar process like Photoshop where you can drag
layers to different canvases...
thanksAre you using Filters? If so, there's a "Copy..." button in
the Filters panel - copy first effect -
paste it to additional Movie Clip symbols.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
mastabeta wrote:
> I have images of a cube that are different colors, but
same dimensions. I
> import one by one onto my stage in Flash CS3 and then
apply some alpha lighting
> and glow effects. There has got to be a more efficient
way to do apply the same
> effects over and over instead of how I'm doing it now
which seems very
> tedious?? I'm looking for a similar process like
Photoshop where you can drag
> layers to different canvases...
>
> thanks
> -
How to use the same mask, stencil, etc., for multiple layers? Photoshop equivalent of masked group?
Hi I spent more than half an hour to search manual, forums, and Internet and still can't find the answer. Please help!
For example, in a comp with 5 or more layers I want to use the same mask or stencil or what ever can hide areas of the layers 2,3, and 4 but layer 5 and any other eventual layers below should not be affected.Pre-compose the layers you want to mask and apply a track matte to the pre-comp using the mask. Think of pre-composing as an equivalent of creating a layer group.
Use Set Matte effect on each of the layers you want to mask. This is easiest to do if you apply set matte once and then create an animation preset to apply to the other layers. Just get set matte to do what you want it to do on the first layer, Select Set matte in the ECW or in the Timeline, then go to Animation>Save animation preset. Then select all of the other layers you want to apply the set matte to and apply the preset.
Put the mask at the bottom of the layers you want to mask and enable the preserve transparency switch, then nest this group in the composition with the other layers.
Here's another tip. You could define a custom color for all of the layers you want to use the matt on, then use the custom color for a group selection. This may make things easier down the line. -
How to stream the same VIDEO from iTunes to multiple Apple TVs simultaneously?
I'm trying to stream the same video/movie from iTunes 10.5.2 under Mac OS X 10.7.2 to 2 Apple TVs simultaneously so that they are in sync. We have 2 TVs in our cafe and are trying to send the pre-service video announcements to both screen wirelessly.
Audio is no problem as I just choose the Multiple Speakers option on the AirPlay icon at the bottom right of iTunes. However, when I choose a video, the Multiple option is not available. I know I can go into the Apple TV menu and choose the video from my Mac that has Home Sharing activated but it is virtually impossible to get the videos synced on both screens.
Is there something I'm missing or is a 3rd party application available that will do this?
Please read what I'm trying to do carefully before responding.
Thanks in advance for your help.
DerekI'm also struggling with this. I have a Mac Mini and 5 ATV2's that I want to stream video content to simultaneously.
-
Two users on same computer how to use the same program and data
Two users on one computer how to share a program and it's data
As Kappy said, each of you should have your own account. By default all programs are installed in the Applications folder so all users on the computer will be able to use the software. With a few restrictions data you want to share between two users can be placed inside the Shared folder - look inside the Users folder for it. Data that gets placed in the Shared folder will retain the owner/creator's rights so if you want other user(s) to be able to do more than open the document you'll need to change the permissions of the file to include that user.
-
How to Add the Same Component to a JPanel Multiple Times
I have a simple JPanel with BorderLayout as manager. I created a JLabel and added it to all of the areas except center. But the JLabel shows up only in the area to which JLabel was added last. WHY?
Any help is appreciated!
DD
jvm 1.4.2._05-b04 on Win2KWhat you need to do is make a class extending JLabel:class myLabel extends JLabel
public myLabel()
}then you can make as many instances of it as you want
eg:myLabel label1 = new myLabel();
myLabel label2 = new myLabel();
good luck -
I would like to use my iCloud email address as the username.
Is this possible?No. Apple will not merge Apple IDs, and you can't use the same username and password for multiple IDs.
-
How to open 2 playlist at the same time and have them in two diferents windows?
until iTunes 10 i can open more than one playlist at the same time, and have this playlist in diferents windos but since 11 i cannot do it anymore.. is anoying if i need to fast switc music froms playlists.. so it become usseless...
i think the aim of the previous itunes (before 10) it was to give a service of arranging librerys of musics.. but now, it becomes a sell party program...
and only to you to know, if i dont put my credit card on my account i cannot even buy FREE programs on appstore...
thats bad... very bad..
if you need some tips how to do it proprerly here you got one..
if is not broken... dont fix it...
now i have my iphone 6, my ipad and the iphone of my wife, but i have itunes 10 because is the one who have the multi windows possibilities.. and now i cannot sync the devices..
thats very bad..
i hope you can help me...
if you dont understand my problem i can show you via video..
thanksYou could create an applescript to do it.
tell application "Dreamweaver's Full Name"
activate
end tell
tell application "BBEdit's Full Name"
activate
end tell
tell application "Acrobat's Full Name"
activate
end tell
Replace the quoted text (leaving the quotes) with the full name of the application, and save the applescript as an application bundle, and put it in your dock.
NOTE: You may have to put the full path to the application for it to work (I.E. /Applications/Dreamweaver.app). If you do, encase the full path in quotes.
Good luck!
Message was edited by: joshz -
How to display data with the same text and key in the drop down list?
Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST,
c(20) type c.
* c = 'select any'.
data:begin of itab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
data:begin of jtab occurs 0,
kunnr like kna1-kunnr,
land1 like kna1-land1,
end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'. "---> Data for key is the same with text
VALUE-TEXT = 'Name'. "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AMshawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
> LIST TYPE VRM_VALUES,
> VALUE LIKE LINE OF LIST,
> c(20) type c.
>
> * c = 'select any'.
>
> data:begin of itab occurs 0,
> kunnr like kna1-kunnr,
> name1 like kna1-name1,
> end of itab.
>
> data:begin of jtab occurs 0,
> kunnr like kna1-kunnr,
> land1 like kna1-land1,
> end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
> default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'. "---> Data for key is the same with text
> VALUE-TEXT = 'Name'. "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh. -
a project on iMovie 09 that Freezes(only the project) the viwer window blocked in gray ... .. After editing that took me a year I'm stuck .
All my finished projects that are in the Library infected with the same symptoms and it happens only after I went into the problematic project.
I tried to open a new project and everything works
...I also tried throwing Recent Files, in the past It solved the problem ,not this time ...
the problem is that this project will take me a long, long time to rebuild
imovie 09
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHzThis recently happened to me. I am a novice, but it seemed like that project got corrupted some how.
I deleted it.
Went to time machine and picked it up again when I knew it was working ok.
I lost a few hours of work, but not the entire project.
Once I had the project back from time machine, it worked fine (but like I said, I lost a little bit of work). -
I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards
Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver! -
When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?
Did you make sure that your security software allows iTunes to contact Apple during the restore process? http://support.apple.com/kb/TS3125
-
The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?
You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011 -
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.
Maybe you are looking for
-
How to set a new DocumentBuilderFactory in my application?
Hello Suners, I really need some help to set a new DocumentBuilderFactory in my application. I have a new instance of DocumentBuilderFactory with my settings and i need to set it in the application so that it use it to show some special DOM elements.
-
Just updated to Firefox 8, and my auto scroll on my touchpad no longer works. Any help?!
Auto Scroll is checked in the advanced settings/options, but still not working. Arrow keys do work to scroll, but I do not use those....So far I'm not impressed with the updated firefox! Not liking the way it's set up!!
-
Why are my smart playlists not updating?
I tried to create a new smart playlist, and could not get even the simplest one to populate with any music. I then noticed that my current smart playlists are not updating. For example, I have an UNRATED smart playlist (Rating is less than *), and
-
Using bufferedreader to insert into a vector
I am trying to read from a text file in an incremental fashion back into a form. I have tried it only reading the first record off the textfile and it works great; however, I run into problems when I try to read the entire file into a Vector or Array
-
My ipad stopped playing youtube vids