I have 3 different accounts and passwords for Apple. 1 for iTunes, 1 for iCloud, and 1 for my iCloud email. It is annoying to remember these 3 different usernames and passwords. Can I make all 3 accounts the same username and password?
I would like to use my iCloud email address as the username.
Is this possible?
No. Apple will not merge Apple IDs, and you can't use the same username and password for multiple IDs.
Similar Messages
-
How can I make all my files the same volume???
I am a DJ and I want to make all of my files the same volume without losing too much sound quality. I dont just want them to play back the same volume on iTunes. I want them to all be the same volume when I burn them to a cd. As there a way to do this? Any help would be appreciated!
I want them to all be the same volume when I burn them to a cd.
If you mean Audio CD, check 'Use Sound Check' in Preferences>Advanced>Burning.
This will - kind of - 'normalize' the tracks and is supposed to bring them at the same volume.
I haven't tried this for a long time though (since iTunes 5, I think), because I was not satisfied with the results.
It could have improved now, so you could give it a try.
I use Jam (Roxio.com) to create my Audio CDs. It has a 'normalize' function that works well and you can also set the gain for each track manually.
You could also try the 'normalize' function of an audio editor like Audacity (freeware) or Sound Studio to alter the files permanently.
Hope this helps.
M -
How can I make all my clips the same size
Right now I have them in the time line and have used for all of them the option scale to frame size, yet some get full screen size and some don't, I want them all the same size, what can I do?
GreetingsSelect the clip in the Timeline, open the Effect Controls panel, use Scale to increase or decrease the size of the image.
Peter Garaway
Adobe
Premiere Pro -
I have three different listings for Bob Seger on my iPod (Bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?
Can you just create a new "Playlist", name it Bob Seger and drag what you want into the Playlist.
File/New Playlist -
how can I make two copies of the same picture one with my watermark and one without for printing for clients?
Export the photo twice, once with a watermark and once without a watermark.
-
On I-Mac, how can I close all tabs at the same time?
On I-Mac, how can I close all tabs at the same time?
I use Mozilla Firefox for internet.Not an Apple product, have you visited:
https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-qu ickly -
IPVC-3511-MCU - Can't see all persions at the same time on conference
Hello,
I can't see all persion at the same time on conference. I also can't see seperate screen on LCD pannel or CVTA on PC.
Does IPVC-3511-MCU support multiple conference with multiple video screen?
Regards,
John.Hi -
This feature is called continuous presence - there are a number of references on Cisco's web site for the 3511. Here is one - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_administration_guide_chapter09186a00804fc993.html and possibly another - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_data_sheet0900aecd801c5e66.html
You did not mention the release of the 3511 software you are running. Knowing that might help too.
Ginger -
When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?
Generally setting a common Album Artist will fix things. For deeper problems see Grouping tracks into albums.
tt2 -
I have the original iPad and when I sync it with my macbook pro in iPhoto the faces key photo aren't the same on both devices, how can I get them to be the same as on the computer
Interesting observation. Thanks for sharing.
Did you have a technical support question? -
Is there a way to make all page margins the same?
I've exported a book file from indesign. Since the pages were in a book-type spread, the odd and even pages have different margins. The odd page has the bigger margin on the left, while the even has the bigger margin on the right. Is there any way to make these identical after the fact. I can't go back and redo the indesign file.
Thanks, there are 382 pages. Can't do them one by one. And I purposely made the margins different in indesign, to give people more space in the middle. The margins are as follows:
But when I try to reverse the inside outside on one page of the spread, just reverse them, so the dimensions are the SAME, all the text and photos move. -
How can I kepp all songs on the same album?
Some of my albums that have duets on them will show up as multiple albums when they were ripped from the same CD. Is there a way to make them all under the same album cover. I also have some artists that under an artist search will show up with multiple different headings of the same artist. I'm using the Ipod on a Kenwood car head unit.
I add it to the title as I've described, i.e. *Title \[Feat. Guest\]*. This means that all the information is still visible when playing the track in iTunes or on the iPod and can also be used when searching.
To fix things I set my library up in List view with the browser turned on and the columns arranged so that I could see both Artist & Album Artist. I then selected the first album in Album section of the browser to show it's tracks. Pressing the down arrow on the keyboard shows the next album. A brief glance will reveal if some tracks of the album have different artist values, in which case these can be fixed before moving on to the next album. It should take less than a second per album to confirm that it is properly formatted as your eyes will rapidly notice any inconsistency in the artist column. The process is only time consuming when you actually need to make some changes.
If two different artists have albums with the same album title, e.g. Greatest Hits, this also shows up when working methodically through this list. I've chosen to rename the albums in the form *Album - Artist* as this separates the albums, makes it clear in the browser which album is which and puts them in artist order. Another approach is adding different numbers of trailing spaces for each different album.
tt2 -
How can I kill all Threads of the same class from within the run() method?
Ok
I have a class called Consumer that extends Thread
I have several Consumer threans running... but, when a certain condition is true (within the run() method) in ANY of the threads, I want to kill ALL the threads of that object.
is this possible?I know this is gonna be too demanding, but can someone please tell me why my Consumer's run() method never reaches the System.out.println( "ALL CONSUMING DONE") line
Create a multi-threaded prime number calculator that is based on the producer-consumer model
using semaphores. Your program should be able to check for prime numbers in a range specified
by the user and with a variable number of threads. Example:
$ java PrimeFind 3 5000 10000
should use 1 producer and 2 consumers (3 threads in total, obviously the minimum is 2) to find all
the prime numbers in the range [5000,10000].
The producer should: use a buffer to store candidate numbers that have to be checked for
primality.
Consumers should: read from the buffer, check if a number is prime and update the status of the
program accordingly (e.g. show the number on the screen, or save it to a file)
import java.util.concurrent.Semaphore;
import java.io.*;
public class Assign1 {
static int fromThisNumber;
static int toThisNumber;
static int numberOfThreads;
static int buffer[];
static Semaphore ready; /*This semaphore is used by the Producer to signal
an "OK" to the consumers*/
static Semaphore critical; /*This is a Mutex semaphore. It allows only 1 consumer
to enter his critical section.
static Semaphore counter; /*This semaphore acts as a counter.
Instead of having a global variable
incremented each time, we just release()
this semephore when we find a prime number
Because remember that release() increments permits
static Producer prod;
static Consumer cons[];
static int in=0;
static int out=0;
static PrintWriter outFile;
public static void main (String args[]){
try{
outFile=new PrintWriter(new FileWriter("primes.txt"));
}catch(Exception e){}
numberOfThreads=Integer.parseInt(args[0]);
fromThisNumber=Integer.parseInt(args[1]);
toThisNumber=Integer.parseInt(args[2]);
buffer=new int[Integer.parseInt(args[2])-Integer.parseInt(args[1])+1];
ready=new Semaphore(0,false); /*We initialise it to 0 because we wait
for the Producer to produce atleast a
item. Suppose ready was 1 and if
Consumer ran first he would be in an
empty buffer */
critical=new Semaphore (1,false);/*We initialise it to 1 because when
the first Consumer thread tries
to enter its critical section, it
should be allowed to;
Subsequent threads will have to
wait since only 1 thread can
access its critical section at a time*/
counter=new Semaphore(0,false); // duh!
cons=new Consumer[numberOfThreads-1]; /*numberOfThreads-1 because 1 thread
is taken by the Producer*/
//Creating Producer object
prod=new Producer();
//Creating the Consumer object and start the thread.
for(int i=0;i<cons.length;i++)
cons=new Consumer();
cons[i].start();
prod.start();
//Printing to screen and file
/* for(int i=0;i<buffer.length;i++)
if(buffer[i]!=0)
System.out.println(buffer[i]);
outFile.println(buffer[i]);
System.out.println("Total primes found between "+args[1]+" and "+toThisNumber+": "+counter.availablePermits()+"\n primes.txt written");
outFile.println("Total primes found between "+args[1]+" and "+toThisNumber+": "+counter.availablePermits());
outFile.close();*/
static class Producer extends Thread {
public void run(){try{
while(in<buffer.length) /*'in' should always be more than 'out'.Oherwise the consumer will try to access an empty index*/
{ System.out.println("producing");
buffer[in]=fromThisNumber;
in++;
fromThisNumber++;
ready.release();
catch (Exception e){e.printStackTrace();}
System.out.println("ALL PRODUCING DONE");
static class Consumer extends Thread {
int tempout=0;
public void run(){try{
System.out.println("before while"+this.getId());
while(tempout<=in)
System.out.println("before ready"+this.getId()+" "+ready.availablePermits()+" "+in);
ready.acquire();
System.out.println("before critical.acquire"+this.getId());
critical.acquire();
tempout=out;
out++;
critical.release();
if(!isPrime(buffer[tempout]))
{System.out.println(buffer[tempout]+" by "+this.getId());buffer[tempout]=0;}
else {counter.release();System.out.println("prime added: "+buffer[tempout]+" by "+this.getId());}
critical.acquire();
tempout=out;
System.out.println("tempout:"+tempout+" of "+this.getId());
critical.release();
System.out.println("ALL CONSUMING DONE"+this.getId());
catch(Exception e){e.printStackTrace();}
//Prime number-checking method
public boolean isPrime(int n){
for(int i=2;i<=(n/2);i++)
if(n%i==0)
return false;
return true;
======================
import java.util.concurrent.Semaphore;
import java.io.*;
/* 3 questions to ask Barlas
* Why error if I start the Consumer threads before Producer
* Why does the counter semaphore always give a +1 result at the end
* Is there a way I can verify that all the work is not being done by only 1 consumer thread? In other words, the workload is being shared properly
* if I put ready.acquire() outside or inside the while loop, its not making any difference, why?
* Strangely, its not making any difference if I playing with the release() and aquire() of the semaphores, WHY?!?!
public class Assign1 {
static int fromThisNumber;
static int toThisNumber;
static int numberOfThreads;
static int buffer[];
static Semaphore ready; /*This semaphore is used by the Producer to signal
an "OK" to the consumers*/
static Semaphore critical; /*This is a Mutex semaphore. It allows only 1 consumer
to enter his critical section.
static Semaphore counter; /*This semaphore acts as a counter.
Instead of having a global variable
incremented each time, we just release()
this semephore when we find a prime number
Because remember that release() increments permits
static Producer prod;
static Consumer cons[];
static int in=0;
static int out=0;
static PrintWriter outFile;
public static void main (String args[]){
try{
outFile=new PrintWriter(new FileWriter("primes.txt"));
}catch(Exception e){}
numberOfThreads=Integer.parseInt(args[0]);
fromThisNumber=Integer.parseInt(args[1]);
toThisNumber=Integer.parseInt(args[2]);
buffer=new int[Integer.parseInt(args[2])-Integer.parseInt(args[1])+1];
ready=new Semaphore(0,false); /*We initialise it to 0 because we wait
for the Producer to produce atleast a
item. Suppose ready was 1 and if
Consumer ran first he would be in an
empty buffer */
critical=new Semaphore (1,false);/*We initialise it to 1 because when
the first Consumer thread tries
to enter its critical section, it
should be allowed to;
Subsequent threads will have to
wait since only 1 thread can
access its critical section at a time*/
counter=new Semaphore(0,false); // duh!
cons=new Consumer[numberOfThreads-1]; /*numberOfThreads-1 because 1 thread
is taken by the Producer*/
//Creating Producer object
prod=new Producer();
//Creating the Consumer object and start the thread.
for(int i=0;i<cons.length;i++)
cons[i]=new Consumer();
cons[i].start();
prod.start();
//Printing to screen and file
/* for(int i=0;i<buffer.length;i++)
if(buffer[i]!=0)
System.out.println(buffer[i]);
outFile.println(buffer[i]);
System.out.println("Total primes found between "+args[1]+" and "+toThisNumber+": "+counter.availablePermits()+"\n primes.txt written");
outFile.println("Total primes found between "+args[1]+" and "+toThisNumber+": "+counter.availablePermits());
outFile.close();*/
static class Producer extends Thread {
public void run(){try{
while(in<buffer.length) /*'in' should always be more than 'out'.Oherwise the consumer will try to access an empty index*/
{ System.out.println("producing");
buffer[in]=fromThisNumber;
in++;
fromThisNumber++;
ready.release();
catch (Exception e){e.printStackTrace();}
System.out.println("ALL PRODUCING DONE");
static class Consumer extends Thread {
int tempout=0;
public void run(){try{
System.out.println("before while"+this.getId());
while(tempout<=in)
System.out.println("before ready"+this.getId()+" "+ready.availablePermits()+" "+in);
ready.acquire();
System.out.println("before critical.acquire"+this.getId());
critical.acquire();
tempout=out;
out++;
critical.release();
if(!isPrime(buffer[tempout]))
{System.out.println(buffer[tempout]+" by "+this.getId());buffer[tempout]=0;}
else {counter.release();System.out.println("prime added: "+buffer[tempout]+" by "+this.getId());}
critical.acquire();
tempout=out;
System.out.println("tempout:"+tempout+" of "+this.getId());
critical.release();
System.out.println("ALL CONSUMING DONE"+this.getId());
catch(Exception e){e.printStackTrace();}
//Prime number-checking method
public boolean isPrime(int n){
for(int i=2;i<=(n/2);i++)
if(n%i==0)
return false;
return true;
===========================
BTW, when I tried to change extends Thread to implements Runnable I got some kinda of error.
Actually, my program is pretty complete... its just that something if messed up in my Consumer's run() method's while loop... I think
I know guys its crazy to ask ya'll to look at so much code, but.... I'd really appreciate it. This assignment is killing me, been at it since 10 hours now.... -
How can I make move podcasts to the same folder?
I want my "RadioLab" and "This American Life" audio podcasts to show up in the same folder. I want this because when I plug my iPod into my car radio the next button in my car stereo will advance to the next iPod cast of the series, but it will not advance to the next series, for example it will advance through all the RadioLab podcasts, but when it gets to the end it jumps back to the begining, it will not advance to the This Anerucan Life series.
You can make a smart playlist containing episodes of both series and play from that. Podcasts are linked together by the URL they are served from so merging ongoing series isn't really practical.
tt2 -
How can i make two ipods use the same apple id
How can I make two ipod touchs have the same apple id
If you haven't already set up your two iPods either make and apple I'd on one and on the setup on the other type on your apple ID by setup I mean when you first get it it asked you questions so when your done answering the questions your iPod is ready to be used
-
How can you make Firefox's settings the same on mulitple computers (not the same as sync)?
I would like Firefox (version 4) to look and have the same settings on more than one desktop.
This is not the same as 'sync' which just synchronizes your bookmarks, history, and passwords.
I want the look and placement of all the toolbars, etc to be the same on all the computers in my house.
Thank you!
RobMaybe this will help:
http://support.mozilla.com/en-US/kb/Managing%20profiles#w_moving-a-profile -
Can I set all folders to the same column with in Finder list view?
I set Finder to display 4 columns in list view: Name, Date Modified, Size, Kind. Is there a way to apply the width of those columns to all folders? Column width is not affected by the option "use as defaults" in the view options.
I've just seen that somebody else asked the same question lately:
https://discussions.apple.com/message/22368987#22368987
There seems to be no way to do what I want to do.
Maybe you are looking for
-
Recieving message when trying to sync
I was putting songs on my iPod, and suddenly I get this message "The songs on Shawn's iPod cannot be synced because all of the playlists selected for syncing no longer exist" I can see all of my songs in the library too, but I don't know why it wont
-
The plugin check page does list something called 'Shockwave Flash." I went to the Adobe site and downloaded and installed the latest version of Adobe Flash but it still does not show up on the plugin check page. I don't see how Adobe Flash can be cra
-
Hi, I'm getting below error message in 'sawlog6.log' file after selecting PROXY user in the drop down list and am seeing Home Page Screen. [2012-11-19T11:14:29.000-05:00] [OBIPS] [ERROR:1] [] [saw.securitysubsystem.checkauthentication] [ecid: e445e65
-
Multiple selection criteria on same field, different parts of report
Post Author: CathyH CA Forum: Formula New user here - I just finished a Crystal Reports course and still don't know what I'm doing so I need help! I am building a report that will show Bugdeted Revenues and Costs and Actual Revenues and Costs (4 sepe
-
Mobile number instead of VoIP service? (Korea)
Hello, Would it be possible for me to gain access to a Korean mobile Skype Number instead of a VoIP number? For example, the number you get with a Skype Number has a mobile code "(70)," Which stands for a VoIP Service. However, a regular number consi