How to pick a field value from transaction during runtime

Hi,
I have an exit which allows creation of po without purch. req. for selected Purchasing Document Types.
similarly the exit should also allow the creation po's with item categories 'L and U' even without pr's.
now my problem is how to pick the value of this item category during runtime so as to put the check.
your suggestions are valued.
Thanks in advance

Hi,
if you have the new debugger, you can see the global variables that you can use in your exit (putting a break point on your code), so you can found easly the structure or field that contains your informations.
I hope that's useful for u,
Regards

Similar Messages

How to read the field value from Table Control

Hello Experts,
I am creating my first Table Control Screen. Basically I have to create a screen (102) with a table control which has 2 fields: A_QTY, B_QTY and 2 Buttons: SAVE, EXIT.
When Clicked on 'SAVE' the data (MATNR) from a previous screen (101) and the data (A_QTY, B_QTY) from the new screen (102) should be saved into a Z-table.
Internal table t_data has 3 fields.
MATNR
A_QTY
B_QTY.
Table Control TC_RACK was declared like this:
controls tc_rack type tableview using screen 0102.
I/0 Fields:
A_QTY type ZQTY.
B_QTY type ZQTY.
The screen Flow Logic:
process before output.
module status_0102.
loop at t_data into w_data with control tc_rack.
endloop.
process after input.
module exit_0102 at exit-command.
loop at tc_rack.
endloop.
module user_command_0102.
module status_0102output.
set pf-status 'STATUS_102'.
set titlebar 'TITLE_102'.
describe table t_rack lines tc_rack-lines.
endmodule.                 "status_0102 output
process after input.
module user_command_0615 input.
case ok_code.
   when 'SAVE_RK'.
   when others.
endcase.
endmodule.                 "user_command_0102 input
Now for eg, when the users enter values for A_QTY and B_QTY like this:
A_QTY     B_QTY
1000         2000
3000         4000
How can I read these values and pass them to T_DATA so that I can save it into Z-table?
I greatly appreciate your help.
I've gone through some previously posted threads and could not understand because my knowledge in this area is preliminary.
Thanks a lot.
Could you please let me know
Edited by: dev a on Jan 13, 2010 2:46 PM

Hi dev a
You should use
DATA: lv_name(30) TYPE c.
FIELD-SYMBOLS: <QTY> type ZQTY.
GET CURSOR FIELD lv_name.   "Get the field name in table control
check sy-subrc = 0.
assign (lv_name) to <QTY>. "Here you get the value in <QTY>
check sy-subrc = 0.
Also use <your table control>-current_line to get the table index uo're currently on.
Hint: Do not use GET CURSOR LINE if you want to get table index since this gives you the line relative to dialog screen
Good luck
Dean Q.
Edited by: Dean Q on Jan 13, 2010 11:11 PM

Remove existing field value from transaction CV01N

Hi Ramchander,
i already used that method but i.e. not working .
when CV01N transaction has done docuement number is automatically created thats why it should
be blank so, my problem is that document is blank for 1st record & when 2nd record is created using bdc then document number field by default taken value of 1st record .
so plz reply me how to remove this value.
Regards,
Jyotsna

HI jyothsna,
PERFORM bdc_field USING 'ABBT-GSMNG(01)' "---> This is the Screen Field name
qn_co48. "---> This is the Value we are passing.
* Just clear this value and leave it blank.
**How did you get it???
Cheerz
Ram
Edited by: Ramchander Krishnamraju on Nov 9, 2009 5:27 AM

How to send date field value from one page to another page

Hi every one!
In my page I have a requirement....I need to select From date and Todate....based on that data has to be displayed in the table....but in my table i dont have such type of fields.....please help me

I used hidden variable also but it's not useful for me. If by "hidden variable" you mean a "hidden field" (ie a text-input field in the submitting form with display=none), then that's exactly what I was thinking...
So WHY is a hidden field "not useful"? It's just that... ummm... I suspect you're doing it wrong, or maybe just not understanding how it works. So post both your JSP Pages (if they're not too big), or take the time to prepare a [Short Self-Contained Compilable (Correct) Example|http://mindprod.com/jgloss/sscce.html].
The more information you provender, the greater your chances of getting real help.
Cheers. Keith.

How to pass input field value from one region to another ?

What I am trying to do :
I have one page with 1 region with one text field and an apply button and a report region.
I want to be able to enter a value in the text field, click on apply and exploit this value in the source of the report region.
Of course, I want the the value in the text field remains after the click on the apply button.
What I cannot control with my try :
1 the text field is always wiped off after the push on the apply button, no matter what kind of "do not clear the cache" setting I have found, and no matter the "take this value for this parameter" setting I have done every where I have found it.
2 (but I think that this is related to 1) I cannot get working the conditional display of the report region on a NOT NULL condition of the above region text field.
I have tried the code of the page 23 of the customertracking demo packaged apps, but the button properties shown are not the same than what I can find in my apps : I guess this is a difference in apex version normal feature.
I think that what I am trying to achieve must be terribly simple but I cannot see it.

Ok I have found out that it was now an interactive report that has to be done for this kind of situation, and that in my case, I needed to enable a detailled report.
Now I have another question : one of my field is rich text : how to render it in my detailled report ?

How to pass the field value from module pool program to smartform using submit?

// AT pai of module pool pgm i entered the following: here gv_orderid is my value to be available at smart form(driver pgm) & zmusic_store_smf is the driver program of my smartform.
gv_orderid= wa-itemid./
SUBMIT ZMUSIC_STORE_SMF VIA SELECTION-SCREEN
                              WITH p_order = gv_orderid
                              AND RETURN.
//AT driver pgm(zmusic_store_smf):
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = 'ZMUSIC_SMARTFORM1'
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
   IMPORTING
     fm_name                  = lv_form
   EXCEPTIONS
     no_form                  = 1
     no_function_module       = 2
     OTHERS                   = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION lv_form
   EXPORTING
*      iv_orderid = is_purchase_item-zorder_id.
iv_orderid = gv_orderid.
// here i'm trying to call my smartform('ZMUSIC_SMARTFORM1') from this driver pgm but unable to access the value of gv_orderid please help me out with this.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

Set the default field value to transaction code field, when calling from WD

Hi all,
Can we pass the value in a input field of a standard transaction calling from WD application. Suppose we are calling a transaction VA03 in an external window, then how will be pass the value in the VBAK_VBELN screen field.
Is there any way to pass the value to this transaction field. I have also tried out to set the parameter ID 'AUN' for VA03 transaction VBELN field. But it did not work for me.
Is there any way to set the default field value to transaction code field, when calling from WD?
Please suggest, if anyone have any idea.
Thanks
Sanket

Hi,
I am using the below code to open a standard transaction. It will help you to explain my point more easily.
DATA: url TYPE string,
          host TYPE string,
          port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
   INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Note*
One more query I want to add to this thread, that is there any possibility to call a custom transaction as well?

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

How to pass field value from popup window to oninput processing of other pg

Hi,
I want to pass a field value from the popup window to oninput processing of main page ( from where popup window is triggered). and need to close the popup window. How to do it ?
In the popup window's oninputprocessing, im doing some validation checks. If it passes all the validations, then only the control shd come to main page ..else it should stay in popup window only .
Regards,
Jothi.

Hi Jothi,
you can use java script to pass the value and close your popup window. use the following code.
in your popup window:
function passData(h1)
         window.opener.document.getElementById('var1').value = h1 ;
         window.close();
then call this function when you finish your validations.
in your main page layout create an input field with id as passed in the function above "var1".
In the value attribute give it your variable as follow:
<htmlb:inputField id      = "var1"
                          value   = "<%= var2 %>"
                          visible = "false" />
"var2" will be assigned the value from your popup window.
I hope this will help you..
Regards,
Husain

How to get POF object's field value from query result

hi,all:
I want to get field value from the query result, my code is below
Set setResults = cache.entrySet(createFilter("homeAddress.state = 'MA'"));
for (Iterator iter = setResults.iterator(); iter.hasNext(); )
Contact c=(Contact)iter.next();
System.out.println ("firstame####=" + c.getFirstName());
* but I get error*
Exception in thread "main" java.lang.ClassCastException: com.tangosol.util.ConverterCollec
tions$ConverterEntrySet$ConverterEntry cannot be cast to com.oracle.handson.Contact
at com.oracle.handson.QueryExample.printResults(QueryExample.java:159)
at com.oracle.handson.QueryExample.query(QueryExample.java:86)
at com.oracle.handson.QueryExample.main(QueryExample.java:43)
who can tell me how to get POF object's field value from query result

Hi,
If you look at the Java Doc for the entrySet method here http://download.oracle.com/docs/cd/E15357_01/coh.360/e15725/com/tangosol/util/QueryMap.html#entrySet_com_tangosol_util_Filter_ you will see that it returns a Set of Map.Entry instances so you need to do this...
Set setResults = cache.entrySet(createFilter("homeAddress.state = 'MA'"));
for (Iterator iter = setResults.iterator(); iter.hasNext(); )
    Map.Entry entry = iter.next();
    Contact c=(Contact)entry.getValue();
    System.out.println ("firstame####=" + c.getFirstName());
}JK

How to get Table Field values during sync from Events like DbSyncProgressEventArgs.

Hi,
I am facing an issue related to Sync. During Sync as some Tables fails to sync, entire Session gets rollback.
Through DbSyncProgressEventArgs or DbApplyingChangesEventArgs, DbChangesSelectedEventArgs or DbChangesAppliedEventArgs, events, i want to find the Field values from that table so that i can identify which raw failed.
For example, for DbSyncProgressEventArgs, we can fetch table using e.TableProgress.TableName. But how can i get fields or Primary key value of that table row which is inserted or updated or deleted.
Please give suggestions on this.
Thanks,
Sangeetha

DbApplyingChangesEventArgs, DbChangesSelectedEventArgs has Context property that has in turn
has a Dataset property containing the change dataset being synched.

How to get the Output File Name as One of the Field Value From Payload

Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
Bopanna

Hi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup

Table Name For 'Picked Quantity' Field in VL03 Transaction

Dear All,
I am not able to find out 'Picked Quantity' Field in VL03 Transaction.Can anybody provide me Table name and field name for the same.
Regards,
Mayank

Hi Mayank / Masha.
Your requirement is to find out the picked quantity for the delivery document.
Please note that this value can never be found from any table & what you will find are only structures.
For this you need to use / run a function module to fetch the Picked Quantity
Functional Module: WB2_GET_PICK_QUANTITY
Goto Tcode SE37 & enter the function module.
Further enter the delivery details in the screen
I_VBELN - Delivery Number
I_POSNR - Item Number
And Execute.
E_PIKMG - the picked quantity.
If you require to find picked quantity for any report you can very well ask your ABAPer to include this function module in your program
Hope this solves your requirement
Regards,
Dhananjay

How can I pass field value betwen view in ICWC?

Hi experts,
I am new to this BSP programming. I have some requirements to modify standard ICWC in CRM 5.0
Hope can get some advices and helps here.
I have added a new field called <status> to context note SEARCHCUSTOMER in BupaSearchB2B view and also the same field name to context note CUSTOMER in BupaCreate view.
I have added the field into both the HTM views and able to execute thru WebClient. However, I have one problem in passing the <status> value from BupaSearchB2B view to the BupaCreate view when I click on the 'create' button.
I do search and saw this thread How can I pass field value beetwen view in IC Web Client? , but i cant figure out how it works.
Do I need to create the field <status> to context note CUSTOMER in BupaSearchB2B? Currently the context note does not have any attributes.
Really appreciate for any help.
Edited by: mervyn tay on Apr 7, 2009 11:42 AM

solved by myself...
code in the CREATE_ACCOUNT method.
ev_entity->set_property( iv_attr_name = 'ZZICNO'
iv_value = lv_icnum1 ).

How to get Input field value?

Hi All,
I have some problem in getting of input value from View to customcontroller.
My problem is I have created a Input field in the view and if Iam giving the value to that field I can capture the value from View to customcontroller and send it as BAPI input.But My input filed is in the view Context.
How can i capture InputFiled value from View to CustomController.
Advance thanks
Nageswara.
Message was edited by: nageswar mandapati

Thanks for your response Patrick,
In my customcontrollerView all my BAPI mathods instances and execute methods are declared.All the attributes directly getting from model class.
But I have two views , in first view I created a input field(for that i created valueAttribute in that context).
Here I want give the conditions If the input field is empty then directly call the execute method of BAPI.
Otherwise give any input to the inputfiled then capture that value and send it input to BAPI from view to BAPI.
In my customcontroller
BAPI b = new BAPI();
b.Param1();
b.param2();
and
execute BAPI()
I done like this.
How can i capture the view input value how to send as a b.parama();
Please guide me .
Any snippests appriciate.
Thanks
nageswara.

How to pick a field value from transaction during runtime

Similar Messages

Maybe you are looking for