How to place outbound files to multiple channels for a single agreement

Hi All,
We need to send single HIPAA 834 document to two different locations(channels) of the same TP. We have single HIPAA 834 agreement with one TP and one channel. is there a way to add two TP outbound channels for a single TP/agreement?
Thanks,
Kathar

Hi Kathar,
is there a way to add two TP outbound channels for a single TP/agreement?One TP may have multiple channels but one agreement can have only one associated channel. You may consider using the broadcast feature of Oracle B2B here.
You may read about this feature here -
https://blogs.oracle.com/oracleb2bgurus/entry/broadcast_feature_in_oracle_as
Please note that this blog was written for 10g but concept and implementation is same in 11g.
You need to create two TP profiles for same TP (you should use different name/identifiers for both) and then make them part of same group by adding identifier "Grouping" in both the profiles with same value. From middleware pass the header "Grouping:<value>" in action name or event name header. At runtime B2B will send the same message to both TP profiles.
Regards,
Anuj

Similar Messages

How is it possible to have multiple styles for a single control

Hi ,
I have a CSS associated with my MXML File . Now how can i assign all these things to my TextInput ,for example by doing below , i can only assign font Size , how can i assign all these styles at a time to my TextInput
<mx:Label name="UserName" width="80" x="89" y="80" text="UserName" styleName="p">
This is my external css file
.h1 {
    font-size: 24;
.p {
    font-size: 50;
.a {
    text-decoration: underline;
.a:hover {
    color: #FF0000;
Thanks in advnace .

Hi,
Try to combine your declarations.
     .newStyle {
font-size: 50;
       text-decoration: underline;
<mx:Label name="UserName" width="80" x="89" y="80" text="UserName" styleName="newStyle">

How to place a file on application server in crm?

Hi,
How to place a file from presentation server to application server in crm?, is ther any tcode or fm to do this one?
Thnaks,

Hi,
You can check this link for the issue:. Load it in the CRM server and compile the program.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ApplicationserverProgram.]
cheers
Aveek

How to place tif file through a script in an indesign document?

how to place tif file through a script in an indesign document?

Emanuele:
it works if i just run a script....
but since i have been using a gui to do some functions, this place command is not able to place the output tif file back into the document

How do I get files from multiple DVDs that are using thesame file names?

How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
Message was edited by: marcr56

marcr56
I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
Assuming that you are using
Premiere Elements 12
Add Media
"DVD Camera or Computer Drive"
Video Importer
Typically the Video Importer Save In: is C:\Users\Owner\Videos
Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR.

How to add multiple databases for a single frontend

We have a project based on distributed databases and we have to workout on .Net framework.I want to know some information of connecting multiple databases for a single frontend and how can we access them.
If so we have connected 2 databases for a single frontend in future if I want add one more database to it how it will be possible to do it without disturbing the current connectivity.
Please help me in resolving this problem.
Thanks......

hi,
what do you mean by connecting 2 databases? can you explain further?
using entityframework you can connect to different databases
public class CustomerContext : DbContext
public ReportContext()
: base("DefaultConnection")
public DbSet<Customers> Customers { get; set; }
and your connectionstring (config file)
<connectionStrings>
<add name="DefaultConnection" connectionString="Data Source=(LocalDB)\v11.0;AttachDbFilename=D:\\Database\Project.mdf;Integrated Security=True" providerName="System.Data.SqlClient" />
</connectionStrings>
you can add more connection strings on it.
https://msdn.microsoft.com/en-us/library/vstudio/cc716756(v=vs.100).aspx
https://msdn.microsoft.com/en-us/library/ms254978(v=vs.110).aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to use multiple hierarchies for a single char in single query

Hi,
Is there any way that we can use multiple hierarchies for a single char in single query. I tried and it just allows me to select one hierarchy even if I use hierarchy variable.
I have a requirement where user wants to see information related to a cost center with different cost center groups in different hierarchies (every year has different cost center group hierarchies).
Suppose I want to see information related to a cost center from year 2001-2004.in these four year cost center may have been associated to different groups depending upon that year hierarchy. How can I do that?
Thanks
Jona

Nope. Now way to do this.
There is always just one hierarchy assigned to a characteristic. And even if the hierarchy was time dependent, it only reads it for one key date and not according to transaction data.
Regards,
Beat

How to show multiple messages for a single exception

hi
Please consider this example application created using JDeveloper 11.1.1.3.0
at http://www.consideringred.com/files/oracle/2010/MultipleMessagesExceptionApp-v0.01.zip
It has a class extending DCErrorHandlerImpl configured as ErrorHandlerClass in DataBindings.cpx .
Running the page and entering a value starting with "err" will result in an exception being thrown and multiple messages shown.
See the screencast at http://screencast.com/t/zOmEOzP4jmQ
To get multiple messages for a single exception the MyDCErrorHandler class is implemented like
public class MyDCErrorHandler
extends DCErrorHandlerImpl
public MyDCErrorHandler()
    super(true);
@Override
public void reportException(DCBindingContainer pDCBindingContainer,
    Exception pException)
    if (pException instanceof JboException)
      Throwable vCause = pException.getCause();
      if (vCause instanceof MyMultiMessageException)
        reportMyMultiMessageException(pDCBindingContainer,
          (MyMultiMessageException)vCause);
        return;
    super.reportException(pDCBindingContainer, pException);
public void reportMyMultiMessageException(DCBindingContainer pDCBindingContainer,
    MyMultiMessageException pException)
    String vMessage = pException.getMessage();
    reportException(pDCBindingContainer, new Exception(vMessage));
    List<String> vMessages = pException.getMessages();
    for (String vOneMessage : vMessages)
      reportException(pDCBindingContainer, new Exception(vOneMessage));
}I wonder if calling reportException() multiple times is really the way to go here?
question:
- (q1) What would be the preferred use of the DCErrorHandlerImpl API to show multiple messages for a single exception?
many thanks
Jan Vervecken

fyi
Looks like using MultipleMessagesExceptionApp-v0.01.zip in JDeveloper 11.1.1.2.0 (11.1.1.2.36.55.36) results in a different behaviour compared to when used in JDeveloper 11.1.1.3.0 (11.1.1.3.37.56.60)
see http://www.consideringred.com/files/oracle/img/2010/MultipleMessages-111130versus111120.png
When using JDeveloper 11.1.1.2.0 each exception seems to result in two messages where there is only one message (as intended/expected) per exception when using JDeveloper 11.1.1.3.0 .
(Could be somehow related to the question in forum thread "multiple callbacks to DCErrorHandlerImpl".)
But, question (q1) remains and is still about JDeveloper 11.1.1.3.0 .
regards
Jan

Create a flat file with multiple characters for enclosures

Hello,
we use OWB 11g2 (11.2.02).
Now we try to create a flat file with multiple characters for enclosures. The manual wrote:
"Enclosures (Left and Right): Some delimited files contain enclosures that denote text strings within a field. If the file contains enclosures, enter an enclosure character in the text box or select one from the list. The list displays commonenclosures. However, you may enter any character. The default for both the left and right enclosure is the double quotation mark ("). You can specify multiple characters and hexadecimal characters as field enclosures."
But it will not work. The OWB use the first character from the left enclosure definition as left enclosure and the second one as right enclosure !?!
Did anyone know this behavior? Is there a solution for this problem?
Thanks and regards
Norbert

HI Raghu,
Use the function module 'GUI_UPLOAD'.
In that you have to specify the field_separator value = 'X' in export section.
Regards,
S.C.K

How to know Sales Organization and distribution channel for a material

How to know Sales Organization and distribution channel for a created material

Hi,
For a single material means u can go mm03 7 select the material number 7 select the sales views then press f4 the details u can see.
For any number of materials u can go to se11 & give table name MVKE then select the required parameters & execute.
pandari

Unable to clone File Adapter receiver channel for parallel processing

Hi Experts,
I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
Can anybody provide me suggestions to solve this error.
Note : without variable substitution , the interface is working good.
Is it due to, i am trying the source structure field in response file adapter?

Hi,
In your CC, do you use some additional paramaters ?
like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
Mickael

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

How do I create a group of channels for input to a AI multi point

Hi,
How do I create a group of channels for input to a AI multi point, so that I can output it to 3 different graphs.I figured out the graphs but I am not able to figure out how to create the group of channels for the input.I saw many examples where a group of channels is given as an input.

hello
You have to put Daq Mx Create virtual channel.vi in a For loop. out side that u should give an array of virtual channel which ever you need to acquire. i am sending the vi in 7.0 too.
Attachments:
read_channel.vi ‏40 KB

How to re-use one SOAP Sender Channel for two different messages?

Hi!
I have an XI Proxy to SOAP Sync Scenario. 5 messages uses only 2 channels - cc_XI_Sender and cc_SOAP_Receiver. All messages comes from one Sender Channel and goes to one Receiver channel, and it works fine.
When I make the same for SOAP to XI Proxy Sync Scenario, I've got a problem. For example I have 2 different messages (mi_so_MSG_ONE and mi_so_MSG_TWO), so it works, if I had a two different sender channels (cc_SOAP_R1 and cc_SOAP_R2).
If I set the same Sender Channel in both Sender Agreements (cc_SOAP_R1), only one message (mi_so_MSG_ONE) goes without errors. When I send a second message (mi_so_MSG_TWO), in SXMB_MONI this message comes from Business System (BS_TEST) as message type one (mi_so_MSG_ONE), and then in stage of transformation in Interface Determination goes to message mapping program for other kind of messages (MM_MSG_ONE_to_XI_PROXY). And then - error in message mapping.
I try many URLs for both messages:
1) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=&Interface=
2) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=BS_TEST&Interface=*
3) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=BS_TEST&Interface=...MyNameSpace...mi_so_MSG_TWO
Message in payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<MSG_TWO xmlns="urn:xxx:yyy:MyNameSpace" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">... some fields... </MSG_TWO>
But in SOAP Header I see that is NOT second message!
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
< !-- Inbound Message   -->
<SAP:Main>
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>93233F70-3E2F-11DF-8CD3-00237D301CD6</SAP:MessageId>
<SAP:TimeSent>2010-04-02T08:13:09Z</SAP:TimeSent>
<SAP:Sender>
    <SAP:Service>BS_TEST</SAP:Service>
    <SAP:Interface namespace="urn:xxx:yyy:MyNameSpace">mi_so_MSG_ONE</SAP:Interface>
</SAP:Sender>
<SAP:Interface namespace="urn:xxx:yyy:MyNameSpace">mi_so_MSG_ONE</SAP:Interface>
</SAP:Main>
Is it correct that many kinds of messages cannot goes through one Sender Channel ? If not... How can I reuse one SOAP Sender Channel for both this messages?
Thanks for helping.

Thanks for answers!
It means a webservice application will be deployed and exposed in PI using the associated Message Interface and its namespace information in the SOAP Sender channel.
It means only one Sender Channel per one pair of names (name of Message Interface and name of namespace). And it will fail if I change something. And question is: why URL for sending SOAP message contains parameter "Interface"?
"backward compatibility" or "for future use only"?
Nothing happens when I change this parameter, seems that name of Interface comes from first of founded Sender Agreements.
If the structures are the same
No. Structures are different.
Making one structure per all SOAP incoming messages looks workable, but... looks strange (in fact I have a lot of SOAP messages, more than 100 Sender channels).
I found an information, that I can use one Sender channel per many messages with different structures only if I make this messages like different Operations in one Service Interface (in PI 7.1).
But in this case in list of messages in SXMB_MONI I will see only a one name of Service Interface for all my messages and it's not so comfortably for supporting: to take a name of operation that fails I need to goes inside.
In older version of XI (prior 7.1) using one sender channel per many messages allowed without any hints.

Issues with multiple Files with multiple subdbs on a single environment.

I'm having an issue with Berkeley DB 4.2 on 32-bit platforms, regarding multiple physical files with multiple subdatabases in a single database environment. Specifically, when I open a subdatabase for a physical file, Berkeley DB thinks that it is using the same subdatabase in a different physical file.
I'm doing the following:
1. Create and open a db enviornment.
2. Move file1 to the common area.
3. Open, get and close the subdatabases in file1.
4. Move file2 to the common area.
5. Open, get and close the subdatabases in file2.
6. remove file2 from the common area
7. Move file3 to the common area.
8. Open a subdatabase from file3. About 1/2 the time, the fetches
return data from file2, not from file3.
It's possible that at some earlier time (i.e. before step 1 of this
test case), file1, file2 and file3 were the same file. I noticed
that there is something called env->fileid_reset, but that is not
in 4.2.52.
Any ideas?

Looks like I've resolved the issue

How to place outbound files to multiple channels for a single agreement

Similar Messages

Maybe you are looking for