How to place pipes, pumps and valves in LabVIEW 8.5?

Hello,
I'm an Undergraduate student of Electrical Engineering and simulating the Lube Oil system for the gas turbine generator.
I need to know how I can place the pipes, pumps and valves in LabVIEW 8.5??
Also I need to know if a control symbol on front panel (e.g. a pipe) can be rotated/tilted or not??
Replies awaited.
Regards

There is a Multi-Segment Pipe control in LabVIEW, but it isn't on the palette. It's a boolean and the color indicates the state.
The attached VI contains one.
Note in addition to changing the size/shape with the grab-handles, you can right-click to add/remove segments.
Attachments:
Pipe.vi ‏5 KB

Similar Messages

How to place the print and zoom link on top of the page in discoverer10g

I created a table format report and I want to place a Print and zoom link on the top of the page also I want to display the sum of a column in the top of the page,
How to go for it.
Message was edited by:
user575682

Wrong forum.

How to place Facebook App and/or iBooks on my home screen?

I downloaded Facebook and iBooks APPS on my iPhone 5 but they are not showing up as one of my icons....how can I get to be displayed as one of my apps? I can't find the app icons anywhere, and when I go back into App Store just gives me an option to open...but won't place them anywhere on my phone!

Try a reset. You can also search using the search screen and see if the apps are on the device, and if they are, it will also display the folder they are in, if they are in a folder. That is on the right side of the search screen listing.

How to place a sound and player in dreamweaver?

After a while I make a website again and I forgot what the
best way is to place a soundfile (MP3) in a webpage in dreamweaver.
Important is that the sound can loop and that there is a player in
the page to turn the sound off.
I tried 'insert flash video' in dreamweaver after I encode
the soundfile/ a song in Flash encoder.
Afterwards I insert it in the page in Dreamweaver and I chose
the Corona skin 1. By testing the page in firefox I heard the sound
but I didn't see the player. What's wrong?
Is there a better way to put a soundfile in a page than
flash? It doesn't have to be flash, as long as the sound plays and
there is a player to turn it off

Have a look at Wimpy audio player or the Wimpy Button. This
will work well
even if visitor doesn't have an mp3 audio player installed on
their system.
http://www.wimpyplayer.com/affiliates/idevaffiliate.php?id=836
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"sjoerdrietman" <[email protected]> wrote in
message
news:gd4duq$fi2$[email protected]..
> After a while I make a website again and I forgot what
the best way is to
place
> a soundfile (MP3) in a webpage in dreamweaver. Important
is that the sound
can
> loop and that there is a player in the page to turn the
sound off.
>
> I tried 'insert flash video' in dreamweaver after I
encode the soundfile/
a
> song in Flash encoder.
> Afterwards I insert it in the page in Dreamweaver and I
chose the Corona
skin
> 1. By testing the page in firefox I heard the sound but
I didn't see the
> player. What's wrong?
>
> Is there a better way to put a soundfile in a page than
flash? It doesn't
have
> to be flash, as long as the sound plays and there is a
player to turn it
off
>

How to place local mp4 and ogg video in Muse?

I have been using Flash to create interactive training including FLV over the web. Now that FLV is dead on the web. I wanted to use Muse but my customer requires video clips to be on his business server. Muse appears to only support uTube like video? Is there a work around to play local mp4 and ogg video by adding HTML code into Muse?
JU in Chelan

There is a native audio and video players embeded here >>
http://jforbes.us/test/index.html
I coded the HTML in Dreamweaver, Inserted it into Muse, Exported to HTML, FTPed to host.
At first it didn't play because I hadn't uploaded the media files. Once that was done - It seems to work.
Excuse the An animation at the top of page. I just used an existing Muse test page to test your idea.

How to place a motion data representation in labVIEW?

i am using motion assistant software and labVIEW to move a slider in X and Y axis. i just want to know how can i plot sort of a graph in LabVIEW to represent my motion data? for example, if X axis moves to point 100, my graph will automatically plot to that point too. so if the slider moves to X,Y (1000,2000), my data representation will also move to (1000,2000) in the graph in LabVIEW.
i would greatly appreciate it if someone could just help me here. Thanks

Hello Gurl,
Thank you for contacting National Instruments. Depending on how the system is returning positional information, there are motion VIs that can return the current position of axes. Assuming that you have NI-Motion installed, you can find these VIs in the block diagram by right-clicking and selecting Search. Type "Read Position", and a number of ".flx" type VIs should show up. Use these VIs to obtain the current position of each axis. You can build the points that are returned from each axis into arrays using for loops. Once you have arrays built for each axis, bundle the axes into a cluster, and then pass the cluster to an XY Graph. The cluster is necessary to pass multiple axes of information to an XY Graph.
Regards,
Mike T
National Instruments

How can I use undo and redo with run time menu?

Hi..I try to built my own menu for graphic programming. How can I use undo and redo in labview with run time menu?

filozof-
During runtime, by default, LabVIEW has undo/redo data changes under the edit menu. This will undo/redo changes made to controls during runtime. If you want a more extensive undo/redo (custom for your application), you are going to have to do quite a few things
1) Create a custom runtime menu (Edit>>RunTime Menu) and place your own undo/redo controls on it
2) Keep an action history in your program
3) Catch the Shortcut menu event for your custom undo/redo controls
4) Reverse the last action in your histroy when you catch the event
This method would allow you undo entire operations (like resize, move, or whatever kind of functionality you are building into your application) unstead of just undoing data changes.
Xaq

Controls that look like valves, pipes, pumps?

I want to visualize and control gas flow conditions in my instrument
using LabVIEW. Are there any libraries available (freeware if possible)
with controls that look like valves, pipes, pumps, etc.?

Frank Holland wrote:
>
> I want to visualize and control gas flow conditions in my instrument
> using LabVIEW. Are there any libraries available (freeware if possible)
> with controls that look like valves, pipes, pumps, etc.?
Look at the Automation Symbols Toolkit from NI. It used to be sold by
itself, but now may be part of a larger package. It has plenty of just
what you want (but is not free.)
Dave
David Thomson 303-499-1973 (voice and fax)
Original Code Consulting [email protected]
www.originalcode.com
National Instruments Alliance Program Member
Research Scientist
303-497-3470 (voice)
NOAA Aeronomy Laboratory 303-497-5373 (fax)
Boulder, Colorado [email protected]

How to place header and footer in OO-ALV program using class

How to place header and footer in OO-ALV program using class tell me wat r the class we shold use and their attributes as well

Hi Venkatesh,
Take a look at this how to [ABAP Objects - ALV Model - Using Header and Footer|https://wiki.sdn.sap.com/wiki/x/xdw]
it's explaining how to define the classes and use it for display an ALV with Header and Footer.
Regards,
Marcelo Ramos

When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

Did you make sure that your security software allows iTunes to contact Apple during the restore process? http://support.apple.com/kb/TS3125

How to place an image in database and how to retrieve and display it in the front end

how to place an image in database and how to retrieve and display it in the front end
and to place an image in database and retrieve the image from database using xml
please,help me out.

Create a table with a Long RAW Datatype column for storing the Image Column Data.
Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
A save on the form saves the image in the Image item in the long raw column.

A phantom folder with the name of a folder that held photos has appeared in my finders places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

a phantom folder with the name of a folder that held photos has appeared in my finders>places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

Can you drag it off holding down the CMD key?
Do a search for it with EasyFind (try different settings in "Operator")
http://www.devontechnologies.com/products/freeware/

How to place event callback components and "main-VI" components in the same Front Panel?

What I'm trying to accomplish:
Place a .NET component, which generates events, and other standard LabVIEW components in the same Front Panel. The standard LabVIEW components should be updated when events are being generated in the .NET component.
How I tried to solve it:
Problem:
The event callback code must reside in a separate event callback VI. In order to "pass the event up" to the main VI I tried to use a global variable. The interrupt does occur:
but I was hoping that the string indicator would be updated when the event occurred, but it wasn't.
Questions:
What's the best way to solve what I try to accomplish? If I want to solve the problem on the picture above, how would I do it (it may not be the best solution, but I'm still curious what's wrong)? Please feel free to be over-explicit when replying as I am novice LabVIEW programmer. Thanks in advance for any help.

There are two bundle functions for creating clusters. The function simply called Bundle operates almost exactly like the Build Array function I showed. The type of the output cluster depends on whatever you wire in as inputs. You don't have to supply a specific type parameter.
The function called Bundle by Name takes in a specific type of cluster in the top input and allows you to fill in the values of that specific type of cluster. To create the specific type of cluster you want, you need to create a cluster of string references. Here's how to do that:
Go to the Front panel and drop down an empty cluster shell.
Go to the Refnum palette and drop down a Generic Control Refnum. Now here's a cool trick to turn that generic refnum into a string-specific refnum (a so-called strictly-typed refnum). Grab a string from the controls palette and drag it into the Generic Control Refnum. Once you drop it, you'll see the refnum change its icon to display a string picture.
Make copies of this string refnum (as many as you need) and add it to the cluster shell.
Now, if you're making specific types of clusters to work with, now is the absolute best time to learn about typedefs if you haven't already. It will save you hours and hours (if not days) of development time in the future. Trust me!
Jarrod S.
National Instruments

How can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?

Hi,
I would like to know as to how can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?
Kindly advice.
Thanks
Priya

Special > Hypertext > Command "open document" will do its best to open the target document inside FrameMaker, which may not be much help; Special > Hypertext > Command "message …" will use the application you specify. The user guide for 7.0 says this about absolute links, and I don't think anything has changed since:
For example, to start PaintBrush and open the Ship.pcx file on drive C you would use the command message system pbrush.exe C:/Ship.pcx
I've not often used a relative link, and not recently: the same source says
folder levels are separated by a slash / even in Windows and Mac
[relative links] FrameMaker searches for a relative pathname beginning in the folder that contains the current document
[absolute links] FrameMaker searches for an absolute pathname beginning at the top of the file system. In Windows, the absolute pathname begins with the drive specifier, a colon and a slash.

How to create an Area and place main windows in scripts

How to create an Area and place main windows in scripts ?

hi prasad,
jst create a page first and define page windows.
here u can specicify whether the window is main or secondary.
to adjust the window goto form painter do the adjustment.

How to place pipes, pumps and valves in LabVIEW 8.5?

Similar Messages

Maybe you are looking for