How to post  data to  external  Server URL

Hi all,
I would like to send purchase order  to Vendors Site, given server URL.   our purchase orders are available in  cXML format.  can you please suggest some solutions.  how to configure the HTTP/SOAP adapter at the receiver side. So that XI can send  the cXML epo  to vendor site. 
thanks
regards
Ram Singhal

Hi Ram,
Did you check this Pdf for the Receiver SOAP Adapter configuration:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40728f7b-0401-0010-d9bc-8c73884a3789
Also the target URL must be the URL to the WSDL. So, if you try putting it in your browser you must see the wsdl code.Please do ensure the same.....
You can also do the Scenario you are trying by using a HTTP Adapter also....
The info u will need while configuring youe receiver HTTP Adapter are:
Addressing type: URL address
Target host: your web server address
Service number: the web server port number
Path: the URL of the .jsp (e.g. /myjsp.jsp)
Also go through this blog and see if it helps....
/people/siva.maranani/blog/2005/09/15/push-data-to-mvc-architectured-application-using-xi
Regards,
Abhy Thomas
Regards,
Abhy Thomas

Similar Messages

  • HTTP Submit Button - How to post data to a Web Server

    HTTP Submit Button - How to post data to an IIS Server
    Steveoruni - 09:50am Sep 4, 2007 Pacific
    Hello,
    I have created a simple form in LiveCycle designer. The form only has some check boxes, radio buttons and text fields for users to fill out. Everyone in my office is on webmail so the Email Submit button is not a smooth option for getting the xml data back to me.
    I would like to use the HTTP Submit button to allow users to submit their form data back to me but I am having trouble. I would like the xml files to end up in a directory on the web server.
    I set up an IIS 6 server and granted the Write right to the anonymous web user account. When I fill out the PDF form and click the HTTP Submit button it doesn't seem to work. Are there any special configuration changes I need to make to my IIS server to allow this data to be posted?
    Should this plan work? Should I be able to have users use the HTTP Submit button to post their data right to my IIS web server or is there some Adobe server I need to buy for this simple form? I'd also be happy if this could work with Apache; it doesn't need to be IIS. I guess my main issue is that I don't know how to get either web werver to accept data in an HTTP post and save it as a file.
    Also, I noticed that when I configure a standard button and set the Control Type to "Submit", there is an option on the Submit Tab to change the Submit As setting to "PDF". Does this mean that my users can fill out my form with Acrobat Reader and HTTP Submit the form to my web server as a PDF complete with their data? If not that's fine, I would be sufficiently happy if the users could post their XML files to the web server so I can open them in the form with Acrobat Professional.
    I am lost and would appreciate any helpful feedback.
    Thanks,
    Steve

    HI again,
    I want to have a pdf fillable form opened on a link.Once user has entered data, the user clicks a button(or some action to invoke saving). At this point I want the filled pdf file to be saved on a certain directory.
    How can save a filled pdf form in pdf format on a certain directory?
    Is it possible to dynamically give the final pdf a name so that it doesnt overwrite everytime it saves the file?

  • How to select data from Sql server 2005 database tableinto oracle database table

    Hi,
    I have table text1 in sql server database and text2 in oracle database (11g). Now how to move data from SQL Server table into oracle table. So please help me how to do it.
    Thanks a lot in advance.
    rk
    OS: Windows 7 professional

    Hi,
    you can use export/import wizard and specify sql server as a source and oracle as destination.
    I hope this is helpful.
    Please Mark it as Answered if it answered your question
    OR mark it as Helpful if it help you to solve your problem
    Elmozamil Elamir Hamid
    MCSE Data Platform
    MCITP: SQL Server 2008 Administration/Development
    MCSA SQL Server 2012
    MCTS: SQL Server Administration/Development
    MyBlog

  • How to extract files from external server

    Dear Friends,
    I need to connect to an external non SAP server, from which i need to extract invoice files.
    Invoice files are of two types:
    1. .dat format files which contain invoice data
    2. .PDF or .JPEG documents, which are supporting documents for those invoice.
    My question are
    1. How do i connect to the external server?
    2. Do i have to do a FTP from SAP to that file server?
    3. Do i have to fetch the .dat file using dataset statments?
    4. What are the basis and network related activities involved to get connected to that external server?
    Any inputs and help on this is highly appreciated and rewarded.
    Thanks,
    Simha

    Hi Simha,
    1. How do i connect to the external server?
    Using  FTP or RFC, BAPI are also possible to get the data from Non SAP server.
    2. Do i have to do a FTP from SAP to that file server?
    based on your company policy use FTP to transfer the data.
    3. Do i have to fetch the .dat file using dataset statments?
        yes. if u using ECC6.0 try this method
    CL_RSAN_UT_APPSERV_FILE_READER=>APPSERVER_FILE_READ
    Reward if found helpful.

  • How to merge data returned from server after you hit SUBMIT button

    I have a PDF form with blank ID field. When user click Submit button on the form, an ID will be generated from database on the server side. How do I merge this ID with client's original PDF from so he knows his ID number? Any help thanks.

    When the user submits the form, he or she is redirected to the web page that you put in the submit URL. The form doesn't generally stick around. A typical response would be to return an HTML page that confirms receipt and gives a reference number. If you want to merge data with the PDF and present that back to the user, it's possible, but not very easy. If you decide that you'd like to go down that path, you can start by searching this forum on "vnd". You'll find a long thread with 30+ messages that show how to merge data with a PDF using various types of CGI scripts.

  • How to access data in different server  with flex3 remoteobject

    I am trying to access data from cfc that is in different pc
    through network and coldfusion 8, flex3 and sql server are in diff.
    pcs. So how can I access the cfc file in different pc using remote
    object which will return the data from another server using dsn? I
    can connect to the service if coldfusion and flex are kept in same
    pc. How can I access it in diff. pc?what will be destination and
    source param values?
    Any help is appreciated.

    Hi,
    You should be able to achieve this by changing the end point
    URL of the channel you are using in the services-config.xml. The
    end point URL should point to the server where your CF is deployed.
    Hope this helps.

  • How to monitor Data downloaded, bandwidth used, Url hit in Client machine through SCOM

    Hi,
    Is there is any way which can monitor Data downloaded, bandwidth used, Url hit in Client machine(windows 7 and Windows 8.1) through SCOM.

    adawson wrote:
    Hi,
    I installed and running ebusiness suite 12.1.1 in Oracle Linux server 6.3, below is the url I used to run ebs in the Linux Server,
    http://aserver.localdomain:8000/OA_HTML/AppsLogin
    Can you access this URL on the server itself? Do you see the login page on the server?
    I need to access the ebs from my laptop which is having windows 7 operating system.
    My laptop (with IP Address 10.0.0.4) is connected to network and I can ping with my linux server's IP Address- 10.0.0.2 (ping 10.0.0.2 works)
    but when I ping from my laptop with the server 's hostname ( ping aserver.localdomain) it says "ping request could not find host aserver.localdomain" .What if you access http://10.0.0.2/OA_HTML/AppsLogin from the client, can you see the main login page then?
    when I tried to access the url "http://aserver.localdomain:8000/OA_HTML/AppsLogin" from the laptop ebs page is not opening.
    Please post the contents of the hosts file on the server and the client.
    Is there any configuration to be made in Linux server where ebs is installed or tell me what things to be done to access ebs from another system.Just make sure the firewall is disabled on the Linux server.
    I also have static ip configured in my router, So tell me what settings to be made to access this same ebs through internet.You do not need an internet access here since your server and client on the same network.
    Thanks,
    Hussein

  • How to post data to Oracle B2B's httpReceiver using SOAP UI

    Hi All,
    I have successfully tested an inbound EDI X12 810 transaction by creating document version, type, definition. I have used an inbound file channel in this case to
    pick the file and the sender trading partner is dentified from the ISA and GS values as I have configured EDI Interchange ID and EDI Group ID at Remote trading
    partner profile level. This configuration is successfully working fine.
    Now my intention is to replace the inbound file channel with httpReceiver i.e. I just want to post 810 document to B2B's httpReceiver using SOAP UI instead of
    using inbound file channel. For this I have mentioned Generic Identifier as Acme under the profile tab of Remote trading partner (Note that Acme is my remote
    trading partner). And I am posting data to httpReceiver using SOAP UI by setting sender as Acme in the SOAP UI headers. But in the B2B reports, the transaction
    is erroring out as it is unable to identify sender, doc type and agreement.
    Please let me know is this the correct way of populating headers from SOAP UI? Is Sender only sufficient in the headers or any others required? Do I need to pass
    IP address also as header? If so, is it my machine IP address? Is that should be static IP compulsorily?

    Found an answer - hope this is what the first person was looking for.
    You can embedded the Apex code within HTML with the following key steps:
    1. Java scripts need to reference the correct URL paths. For example on apex.oracle.com they would be
    <script src="http://apex.oracle.com/i/javascript/htmldb_html_elements.js" type="text/javascript"></script>
    <script src="http://apex.oracle.com/i/javascript/htmldb_get.js" type="text/javascript"></script>
    2. The <form...> tag needs to have the DAD URL in it. Such as:
    <form action="http://apex.oracle.com/pls/otn/wwv_flow.accept" method="post" name="wwv_flow" id="wwvFlowForm" >
    Any other references need to point to the right URLs.
    Finally, the action that will occur after submission is defined by the Apex Form, so you will need to set the appropriate Branch action in the application, such as going back to the same URL currently on, etc.
    Stephen

  • How to import data from SQL server to Oracle?

    Dear Sir/Madam,
    I want to move database data from SQL Server to Oracle, but don't how to do it, will you please help me do it?

    Oracle Migration Workbench is your best bet:
    http://www.oracle.com/technology/tech/migration/workbench/index.html
    Cheers, OTN

  • How to file data from sap server to third party-tibco using EDI-Idoc?

    Hi all,
    I need to send data from sap server to third party system in th form of file.
    Please guide me how to send data file from sap server to third party-tibco using edi-idoc?
    Also guide the configuration ti be done for EDI.
    Thank you.

    1)create file port
    2)TCP-IP RFC destination with a program RFCEXEC to be executed on application server
    3)Dummy distribution model
    4)Partner pofile of type other han LS

  • WP8 WebBrowser control. How get POST data in _Navigating event

    Good day. I have WebBrowser control. I call web page with form. When user fill this form he'll tap on "confirm" button in this web form and this form calling constant Uri (I send this Uri before call this form). In event handler webBrowser1_Navigating
    I watch what adress calling whis form (using e.Uri.AbsoluteUri), but I don't see POST data, whom form sended me.
    How can I read this POST data?

    Yes, I know we can get the data in the webBrowser1_Navigating when we use the GET method. But for the POST method, it should not be possible in Windows Phone. In web pages, we usually use the fiddler to check the post data.
    The below is a same question:
    http://stackoverflow.com/questions/7301605/windows-phone-webbrowser-navigating-event-form-data .

  • Post data 2kb to server failed

    hi:
    My app send image to server and it works well with nokia phones , but not with sony ericsson phones.
    The se phones post data in chunked encoding when data size more then 2kb, there seems no chance to make changes to client behavior.
    My server is tomcat 4.1 , it claims to support http1.1 and chunked encoding.
    then why?
    There many post about this topic, but no good or reasonable solution to this.
    What can i do about this? Any advice?
    best regards

    I have run into the same problem on other handsets as well (Nokia, etc.)
    We found two solutions:
    1) The version of apache we were using (1.3?) would not accept chunked POSTs. We upgraded to the latest version (2.2.3?) and magically our chunked POSTS were accepted by the server. I believe this support was added in v2.2 of apache.
    2) You can also roll your own custom imlementation of HTTP POST that operates over sockets. I had to do this once on a BREW handset that refused to send more than 1.5k (total) of POST data.
    Hope this helps,
    Sam

  • How to upload data from application server

    Hi,
    please help me out in uploading the data from application server which is a tab delemited file into an internal table.
    Thanks
    kumar

    hi,
    Use this sample code as an example.
    table declaration
    tables: mara.
    *data declaration
    data: begin of it_lfa1 occurs 0,
    vendor like lfa1-lifnr,
    land1 like lfa1-land1,
    name1 like lfa1-name1,
    ort01 like lfa1-ort01,
    end of it_lfa1.
    selection screen
    selection-screen: begin of block b1 with frame.
    parameters: p_file type rlgrap-filename obligatory.
    selection-screen: end of block b1.
    at selection screen
    at selection-screen on value-request for p_file.
    *& start-of-selection
    start-of-selection.
    perform transfer_file using p_file.
    perform write.
    *& Form transfer_file
    text
    -->P_P_FILE text
    form transfer_file using p_p_file.
    data: l_message(30) type c.
    ***opening dataset for reading
    open dataset p_p_file for input in text mode encoding default message
    l_message.
    if sy-subrc ne 0.
    message i001(zerr2) with p_p_file.
    endif.
    *******transferring data from file to app server.
    do.
    read dataset p_p_file into it_lfa1.
    if sy-subrc = 0.
    append it_lfa1.
    clear it_lfa1.
    else.
    exit.
    endif.
    enddo.
    *******closing dataset
    close dataset p_p_file.
    endform. " transfer_file
    *& Form write
    text
    --> p1 text
    <-- p2 text
    form write .
    loop at it_lfa1.
    write:/ it_lfa1-vendor,
    it_lfa1-land1,
    it_lfa1-name1,
    it_lfa1-ort01.
    endloop.
    endform. " write
    Thanks
    Aneesh.

  • How to get data from application server

    hi experts,
    when i load data from application server(.csv file) to ODS, data all goes one column.
    in infopackage exterdata tabstrip  i have given the below values.
    escape sign is "
    data separator is ,
    separator for thousands is ,
    my sample data:
    "1010000";"A410";"03.2008";"113.5704531"
    "1010000";"A410";"04.2008";"93.1146410"
    any ideas..
    Siri

    Hi Siri,
    You should look in the T.Code :RSCUSTV1
    BW:Settings for Flat File
    Thousand separator 
    Dec. point separator 
    Field separator         
    Field delimiter 
    Then you can use the Same Characterstics while creating the Flat file & also passing the same in Info Package
    This will resolve your issue
    Regards
    Hari

  • Hard drive replaced on imac how to restore data from external hard drive

    Hard drive crashed, replaced by authorized dealer.  Need to transfer all data from external hard drive to repaired computer.

    http://web.me.com/pondini/Time_Machine/14.html
    See especially C.

Maybe you are looking for