How to print on M1132 via wifi router Zyxel Keenetic Giga II from iPhone?

Hello everybody!
I would like to use my HP m1132 as a network printer in my home wifi network.
Please let me know if it is possible to connect my printer via USB to the router Zyxel Keenetic Giga II and printout pictures and docs from iPad?
Printer is visible by router, but asks *.inf driver when attempt to print from laptop in the same network.
Please suggest a solution how to print out.
Thanks in advance.

Yes, you can use bluetooth and WLAN at the same time. It's not a problem at all with our new notebook.
In order to get your bluetooth up and running read the following website:
http://aps2.toshiba-tro.de/kb0/TSB7201PI000LR01.htm.
You can use the program "Bluetooth Settings" afterwards to setup your printer.

Similar Messages

  • My wife's and my photos go from Iphones to the Cloud. She sees them on her IPad but I can't see them on my MacPro. What do I do?

    my wife's and my photos go from Iphones to the Cloud. She sees them on her IPad but I can't see them on my MacPro. What do I do?

    This is very helpful. It seems my IPhoto is too old and can't get on the ICloud for photos yet. I will try the upgrade.

  • How to connect hp deskjet printer 2060 to a wifi router

    I have a Deskjet 2060 AIO deskjet printer and want to connect to the Netgear Router N300 DNG2200 on the usb port on the router. When the printer is connected there is no notification on the USB port on configuration page. If I connect usb drive it is dected. Thanks for help in advance. 

    I really feel bad that I bought a product for which the customer support is so poor.
    @Underwater
    Yes you can add the printer to the router and the router should be able to direct your requests. Due to the printer software restrictions, the other utilities like cleaning/alighning etc would not work and you'd have to connect via USB.
    I am using the same printer with my Belkin N600 router and the printing works fine.
    And on a side note, just try to figure out things yourself. The support (as evident from the above two replies) is outright pathetic and misleading.

  • Printing from iMac using bonjour to a printer connected to netgear wifi router USB port

    Wondering if someone could help provide advice. I have just purchased my first iMac and a new NetGear W600 wifi router. I have connected my Canon multifunction MX310 printer directly to my iMac and it prints and scans perfectly. However when I connect it to the USB port of my new NetGear W600 wifi modem the only thing I can print is the test page on the iMac, ... nothing else prints. I receive the message that my iMac has connected to the printer but nothing prints out, except the basic test page.
    In stark contrast, when I install bonjour on my Dell notebook PC, running Vista, it prints perfectly to the same MX310 printer connected to the NetGear wifi router!

    Hi, Thanks for your help. I am trying to get documents printing to the canon printer in wifi mode, via bonjour, when the printer is connected to the USB port of my NetGear wifi router. I have a wifi internet connection via the same NetGear wifi router so it doesn't seem to be a network connectivity issue. ... any other ideas?
    Many Thanks
    John

  • I have an wireless printer and a new wifi router. I have set the printer and iPhone / iPad correctly to the new router but when i try to print it won't recognise the air printer. Help. All was working fine on my old router

    I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly  to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!

    Start with the most basic thing that you can try. Unplug the router from power for about 30 seconds, and restart the printer and the iPad and plug the router back into power.

  • Viewing lan sites hosted on macbook pro (apache) via wifi router

    Hi, thanks for stopping by. Hope you can help.
    I've my macbook pro (Lion) set up to serve several websites locally. In the httpd-vhosts.config I've got the addresses set up:
    <VirtualHost *:80>
    etc.,
    ServerAlias site.localhostname.lan
    </VirtualHost>
    I have a netbook (Windows 7) which via my router (wifi) I can view these sites such as... http://site.localhostname.lan
    My wifi only iPad (iOS 5.1.1) also connected to the router however tells me the server cannot be found after inputting the .lan address ...
    Any pointers would be gratefully received, thank you.

    Just an update. I'm doing my best to resolve this myself.
    localhostname.lan works (takes my iPad to the Sites folder on the macbook).
    So this is where I'm at, wondering why the ServerAlias (and DocumentRoot) in the config file (mentioned above) is being ignored. Don't know if I'm on a wild goose chase with this.
    I found another thread in here which seemed to focus on MAMP (something I've never used, always used the native Apache server).
    I'll keep searching and hoping someone will be able to help out a bit, thank you.

  • How can I connect to my wifi router, but still use my cellular data?

    I have setup a (off the internet) router at work to allow other Iphone users to connect with each other, as well as use the Apple TV. My Iphone 4S tries to use the wifi for email, web browsing, youtube, Netflix, etc...  I would like to use my cellular data to load Netflix and such, and then stream them over my local wifi to the Apple TV.  Is there a setting I can change that will allow me to do this?   Thank you.

    Nope. You connect to either WiFi or the cellular data network, not both at the same time.

  • How connect to windows network via wifi?

    i try to connect to my windows shared network via wifi,but it doesn't work.
    here's the error message
    please help me to solve this problem
    thank you.

    Check the settings on your iPad for automatic downloads.....
    Settings>Store>Automatic Downloads>Apps. If it is enabled, turn it off. The apps shouldn't download again as far as I know, but this is a good a place as any to start.

  • Canon MX870 prints incredibly slow via WIFI

    I have an MX870 with an iMac quad core running OSX 10.6 and a netgear router.  I don't use a USB cable because the run would exceed 15' because of the way the furniture is layed out where the computer and printer are, and the USB cable is too long to power the connection.  This has happened with every printer I've used.  However, the printer/computer and router are all physically within about 6 feet of each other at most (I'm just trying to avoid running a USB cable directly across the carpet in the middle of the living room).  So I use the wireless printing option.  However, even when i have a document that is composed of nothing more than 1 black and white sentence and nothing else on the page, or a envelope that I'm putting nothing more on than an address, it always takes between 2-3 minutes from the time I hit print, to the time the paper comes out of the printer.  Even with wireless printing, this can't be right.  There has to be some way of speeding up the process.  Any suggestions would be welcome.  Thanks

    Yes, I've installed the CD completely and no this isn't the first or second time I've used the printer and had this issue. I've had the printer a few months and always had this slow printing problem. If I'm literally printing one white page that has only one word typed on it, it takes 2-3 minutes from the time I hit print until the time it comes out.
    Now, I am usually turning the printer on when this happens. But even if I leave it on, I have the same delay with subsequent prints I try while it's till on.
    As you watch the printer LED display, it appears it's taking a while to receive the info from the computer/router. I hit print, see the LED change from idle to processing, and it stays in processing for a whiile. Once it begins to actually print, that usually goes at a normal speed.

  • How to setup a specific calendar in iCal not to sync events from iphone S to other apple devices?

    In iCal, multiple calendars can be setup.  For example,  I have 3 different calendars in iCal.  I would like the events in calendar 1 and 2 to b synced with my Mac Pro, iPhone S and iPad. I do not want the events in calendar 3 to be synced from my iPhone S to the Mac Pro and iPad. How can this be set up?

    Hi ChrisJC,
    To get the specific calendar folder (non-default folder), please refer to this code below:
    Dim oNS As Outlook.NameSpace
    Dim MyItemsFolder As Outlook.MAPIFolder
    Dim myAppoint As Outlook.AppointmentItem
    Set oNS = oApp.GetNamespace("MAPI")
    Set MyItemsFolder = oNS.Folders("[email protected]").Folders.Item("Calendar")
    Then you could add appointment item by using
    Items.Add method.
    Set myAppoint = MyItemsFolder.Items.Add(olAppointmentItem)
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can i transfer my data (messages, notes, calendar, contacts and music) from iphone 4 to iphone 5. note that iphone 4 data has been backed up and sync to the itunes

    i have just sold my old iphone 4 but before letting it go, i have backed up its data and sync it in itunes. afterwhich i have restored it to its original setting.
    i have purchased an iphone 5 and i would want to transfer all the data from the old iphone 4 to the new iphone 5.
    is the transfer possible? if yes how? if no why not?
    Thanks

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • HT1711 new computer, new itunes, how do i transfer my apps and music to my new computer from iphone 4

    new computer, new itunes, all files on computer lost, how can I transfer my apps and music from my ipods and iphone 4?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT201210 refuses to download ios7on ipad even on wifi or itunes but i downloaded from iphone without any problem

    ios7 download difficult eve3n when on wifi and itunes

    What model iPad and what iOS version is it currently running?
     Cheers, Tom

  • How can I see exactly what time messages are sent or received from IPhone 4

    Is there any way to view exact times that messages are sent and received from an iPhone 4 running iOS 7?

    If you are using iOS 7, then slide the text bubble to the left and you can see the time stamp to the right of the bubble.

  • TS4268 Wife changed over to HTC one from IPhone but now she can't receive my messages.  I have already turned off her I message on her iPad

    I have transferred my phone service to HTC one and now I cannot receive messages on my phone just on my iPad. 

    1. Messages on the iPad can only be sent to other iDevices and Mac Computers running Mountain Lion.
    2. They must also be registered with iMessage
    Note: The two above conditions must be met.

Maybe you are looking for

  • Multiple iCloud Accounts in iCal

    Does anyone know if its possible to add multiple iCloud accounts into iCal? i have a situation where i have one account asigned to the mac through system prefernces which is syncing iCal, Address Book, Mail etc etc. I also have another iCloud account

  • CS3 errors on 10.5.2:  Photoshop "Save As" causes AssetServicesCS3 to "quit unexpectedly"

    There are additional errors with CS3 as well.<br /><br />We've tried deleting the photoshop and the browser plist files.<br /><br />We've tried deleting the /Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.1.0 and running the downloa

  • Cancel export to pdf

    Post Author: [email protected] CA Forum: Exporting We have an web application (asp.net, c#, sql server 2000) where the user can export a report to pdf. We see that the methode ReportDocument.export() takes a lot of time. When the user closes the wind

  • Why is NFC not available in android 4.0 update???

    Why is NFC not available in android 4.0 update??? Solved! Go to Solution.

  • Scaling with scale9Grid

    scaling with scale9Grid Hey guys, I'm having more of a math problem than an AS problem ... I have a moiveclip which contains a movie clip of a rectangle picture frame image which is scale9grid enabled (i have the grid staring at the inner corners) an