How to program for two PCI cards with identical device ID?

I have 2 PCI-6713 cards, and they have identical device ID. I'm trying to program in Linux using C++. I got some examples from NI, but non of them seems considering this problem. Where can I get help for this?
Thanks.
flofish

The short answer is that you should read out the EEPROM on each of the two cards you find to determine which one is which.
I don't have specific examples for the 6713 on how to do this, but here are the necessary pieces.
EEPROM Read Example - this example is for the E series MIO card, but will be similar for the 6713.
E Series RLPM - in chapter 5 it describes how to read the EEPROM, which corresponds to the example. The 6713 may have a different EEPROM on it than the example uses and you may have to adjust the code accordingly. Look on the 6713 to find the EEPROM and then look up its manual online. Most likely it is one of the following chips: MB88341, DAC8043, 8800.
EEPROM Map for the 6713 - this is the roug
h allocation of information within the 6713. I don't see the serial number listed, but it should be stored on there somewhere. You may want to read out the complete EEPROM and compare the values to the known serial numbers of your boards.
Christian L
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense
Attachments:
eepromread.cpp ‏5 KB
6713_eeprom_map.doc ‏125 KB
341079b_MIO_E_RLPM.pdf ‏1094 KB

Similar Messages

  • How can i pay on the apple store online with two credit cards, with two different billing addresses

    I will be greatful if you could answer me this question...
    How can i pay on the apple store online with two credit cards, with two different billing addresses?
    I know that you can use two credit cards to pay an item but the problem is that i can only put the billing address of just one of the credit cards, and since the two cards are from different people (my parents) i can't do it. They live in the same place so i don't know if i should just put one of the billing address.
    Thank you.
    PS. I don't know if this is the right community to ask this, sorry if i'm wrong.

    On the Apple Store "Payment & Pricing" page it states:
    Using more than one payment card
    You can also combine payment methods to pay for your purchase. Choose from the following combinations of credit cards and Apple Gift Cards:
    Credit card(s) - up to two
    Apple Gift Card(s) - up to eight
    Apple Gift Card(s) + one credit card
    During checkout, if you are paying with a gift card issued by a credit card company, you can combine it with one credit card.

  • How do I get two credit cards associated with my apple account?

    Is there a way to associate two credit cards with one apple account?  I have a work ipad that is associated with my corporate card but would like to download some movies and such for personal use and would like to use my personal credit card.  If I can't do that, can I have two apple accounts and use them for the same device?

    Sorry but no; it's one credit card at a time. If you want to use two cards in a single account, you will have to change card information in your account every time you switch.
    But yes, you can have two different iTunes Store accounts and use content from both on your iPad and/or computers without problems.
    Regards.
    By the way, this forum is for questions about the Communities themselves. You'll normally be more likely to get a quick and helpful answer if you post in the  forum dedicated for your product or service.

  • How to run 300w of video cards with precision tower 5810 685W power supply?

    I have a precision tower 5810 with 685W power supply.  In the Tech Specs it says.
    Support for two PCI Express® x16 Gen 2 or Gen 3 graphics cards up to 300W (total graphics in two slots with 685W PSU)
    So you should be able to run two 150w video cards but 150w video cards all seem to need two 6pin power connecters each for a total of four 6pin power connecters for two cards.  But my 5810 only has two 6pin connecters.  And I can't find anywhere to plug in more.

    150W cards have 1 pci-e connector, 75W comes from the X16 slot and 75W comes from 1 PCI-E connector.
    225W  cards need 2 which gives 150W from PCI-E power and 75W from the X16 slots.
    You cant use 2X  225W card.

  • ATA PCI card with 48 bit BIOS support?

    Hello,
    I have an iMac G3 CRT purchased at the very end of 2001 (last of this model.) I am about to install a new hard drive. I am replacing an 80GB with a 160GB Maxtor (because they were the same price!) The drive box says that drives larger than 137GB require a Mac-compatible ATA PCI card with 48 bit BIOS support. Do I already have this? Is this part of the mother board? If not I will exchange the drive for a smaller one.
    Thanks.
    iMac G3 CRT Mac OS 9.2.x

    I forgot to mention something. Firewire cases can allow you to make use of a larger drive though. So you could keep your internal and put the new drive in a firewire case that supports large drives and get lots of extra space.

  • How to check for a function module with its description and functionality

    Hi all,
    How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

    Hi,
    You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
    Say for example you need to search something regarding converstion.
    Search for * CONVERT * and press F4.
    If there is something specfic like converting date to something you can give
    DATE * CONVERT *
    OR
    CONVERT * DATE *  and press F4.
    Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
    Regards,
    Pramod

  • I bought and retend a movie from itunes. The Trailer had Portuguese subtitles. The film rented hasn´t subtitles in Portuguese. How should do for get a version with Portuguese subtitles . Can you help me ?

    I bought and retend a movie from itunes.
    The Trailer had Portuguese subtitles.
    The film rented hasn´t subtitles in Portuguese.
    How should do for get a version with Portuguese subtitles ?

    If the film's description page in the store says that it has Portuguese subtitles then they should show as an option when playing it : iTunes: Language settings for video - Apple Support
    If it doesn't show an option then the film might have been mis-labelled in the store, in which case try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ???

    I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ??? I have a great dell computer, Dimention 8400. Before I install firefox I want to know for no waste of time for either party..

    Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
    If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
    If it was never registered to your account then it won't appear on your support profile : https://supportprofile.apple.com/
    The only other ways to find it that I know of (apart from on the actual device) are via the packaging, the backup on a computer's iTunes : http://support.apple.com/kb/HT4061

  • How to programming for GPIB Primary Address 0 and 31?

    Hello. How to programming for GPIB Primary Address 0 and 31?

    Make sure no other instruments are at addresses 0 and 31. National Instruments GPIB controllers default to primary address 0, so if you want to use an instrument at primary address 0, you should change the address or your controller. You can do this by using the ibpad function.
    NI-488.2 Function Reference Manual for Windows

  • My iPhone has my old email set up throught iCloud. How do I reset my new username with the device without deleting everything. And if I have to delete my old account, will everything (contacts, pictures, games, apps, etc.) be erased from my phone.

    My iPhone has my old email set up throught iCloud. How do I reset my new username with the device without deleting everything. And if I have to delete my old account, will everything (contacts, pictures, games, apps, etc.) be erased from my phone.

    Your old ID connects to an icloud account containing all your data (email, contacts, etc.)  If you then use a different ID, you will connect to a different account, which results in losing all your "apple" data, like emails, contacts, calendars, etc.
    However, Apple IDs are also used to connect to an itunes store account, with is different.  You can keep using the old itunes store ID to keep all your purchases (but if you change to a different ID, you will lose all purchased items) and use the new ID for icloud (but losing emails, contacts, etc. from the old account).

  • The computer is unable to establish a two way communication with the device

    Hi  I am trying to fix a problem for some one else, and I am struggling where to look next. The issue is that we are unable to check the ink levels of a HP Deskjet 1050 printer.  The error message states that the computer is unable to establish a two way communication with the device. After running through the troubleshooting guide about this issue on the HP site with no joy,  I decided that it may be the printer and suggested a replacememnt.  Unfortunately A new HP Envy 5530 was purchased and connected (wirelessly) but the issue remains. I have uninstalled the drivers multiple times, and also disabled any firewall/anti virus software in case this was interfering. I was hoping that some one could point me in the right direction next? None of the other forum posts here (or any google searches) give a solutuon which has fixed the problem.  Thanks

    No I cant. Unable to ping the printer too, not sure if this is possible normally?

  • How to make "visa find resource" working with Agilent device

    I am trying to use Agilent 82357B GPIB device with LabVIEW for instrument control.
    I have checked:
    1.       NI-VISA (ver 5.1.1) is the primary visa by checking visa.dll properties under windows\system32 folder
    2.       Enable NIVISATulip.dll in NI Max Explorer
    3.       Enable the Agilent libraries to work with NI 488.2 in Agilent IO library (ver 16).
    I am able to communicate with the instrument in Max Explorer and talk to the instrument in LabVIEW with VISA write for almost all commands.
    But I can NOT make one particular visa function (Visa find resource) working with Agilent 82357B GPIB.
    With NI USB GPIB device, the same code above can find attached instruments as below, where GPIB1 is the Agilent device and GPIB0 is the NI device.
    I have no clue on how to make “visa find resource” working with Agilent device.
    Please help.
    Solved!
    Go to Solution.

    Quick question.  Did you also enable 488 support in Agilent? 
    If that does'not work try this.  and well see if you found a bug
    Jeff

  • How do I activate adobe I'd with my device?

    How do I activate adobe I'd with my device?

    No activation necessary. Just open Adobe Reader after you download it from the App Store.
    This document may help you to transfer PDF files to your copy of Adobe Reader:
    http://forums.adobe.com/docs/DOC-2532

  • How to simutaneously use 2 PCI cards, one with traditional DAQ, the other with DAQmx?

    Hi,
    I am currently trying to debug a system that used to work.. but sadly isnt anymore
    A single computer contains 2 PCI cards (6110 & 6036E). The 6110 card is controlled by a fairly old software, programmed in labview, and hence, using Traditional NI-DAQ. The 6036e card is controlled by a more recent soft, programmed in LV as well but using DAQmx.
    the AI/AO of the 6110 card is only momentarily used (20 sec consecutively, every minute) while the 6036E card is continuously receiving and sending data on its AI/AO.
    Now the problem: the program that control the 6036E card freezes every time that the old prog access the 6110 card.. and then it works again perfectly until the next time that the 6110 card is used.
    So my question: how can I make those 2 cards work simultaneously?
    I dont think that it is because of the software nor because of the computer lack of memory/CPU if it used to work in the past. It might be about a wrong configuration of cards in the MAX but I couldnt find anything wrong there (no problem when accessing AI/AO of both cards through "test panel")
    Thank you very much for you help.

    That's what bugs me. The only thing that those 2 cards share is an AO of the 6110 connected to an AI of the 6036.
    For the rest, nothing is common. The 1st program only deal with device1, while the 2nd prog only access dev2. There shouldnt be any problem and everything is working fine separately. Hence, why I was wondering if the traditional daq and daqmx might conflict on a same computer.
    I just cant find out why the 2nd program controling the daqmx card just freeze everytime the 1st program access the traditional card. It actually doesnt freeze completly but becomes soooo slow, with about only 2 iterations of the main while loop during those 15-20 sec (instead of the normal 3-4000 iterations during such a period).
    The computer specs are a 2.2ghz proc for 1G of ram and running XP, so it should be ok.. even though the computer does slow a bit down when the 1st prog access the traditional card.

  • How do I use two DAQ cards in one Labview code? Current I'm getting error " error 200558 occurred at DAQmx Create Channel.vi. One task cann't contain multiple independent devices". Can someone help me?

    The two DAQ cards are NI PCI-6070E & NI PCI-6052E. The Labview I'm using is labview 7 Express and the Window system is Window XP. I'm using NI SCXI-1000 chasis and SCXI-1102 & 1102B two modules plus a feedthrough SCXI-1180. 1102 is connected through SCXI-1349 cable to DAQ card 6052E while 1102B is connected through SCXI-1349 cable to DAQ card 6070E. SCXI-1180 is connected to 6070E through SCXI-1349 adaptor on the back of 1102B.

    Sarah, thank you for replying my question. It seems that I'm making progress everyday (smile). I'm able to run the test using both daq cards in my code now. But as I'm moving forward, I'm getting new questions too. How do I use one STOP button to control both tasks and how can I save data into one single file?
    I attached my code here hoping you can get the specifics on my application by looking at the code. Thanks very much!
    Thanks.
    Attachments:
    DAQmx_Task_Example_plus_voltage_2.vi ‏416 KB

Maybe you are looking for