How to push data from BW into SAP R/3 system???

Hello,
We have faced a problem. We need to push compressed sales data from BW to SAP R/3 system. But We don't know how to do it.
Does it exist the standard instruments for it (without ABAP development)?
How to integrate BW and SAP system?
We will be much obliged you for your recomendations and advices.

Hi Igor,
I'm not aware of any standard out of the box mechanisms for moving Sales data back into SAP ERP. There are some delivered "retractors" for business scenarios like financial planning and consolidations where updated data is sent back to SAP ERP in a closed loop scenario. These retractors have been written in ABAP.
I would suggest that you search the latest BI content to see if there is anything for sales data retraction. There might also be information in SAP note on how to do this in code.
To send data from BI, you can also use the 'open hub' feature to extract the BI data to a DB table or file for example. This could then be read by a program to load SAP ERP. The loading would have to be custom development.
Sorry I can't help you more - I fear you will most definitely have some custom development in this case.
Cheers,
Mike.

Similar Messages

Upload data from Excel into SAP CRM using webservices

Hi,
I want to upload the data from EXCEL into SAP CRM using a web service, can anyone say me the process and also how to map the excel and the source code structures.
Thanks,
Sanju.

Try the following :
Class: CL_GUI_FRONTEND_SERVICES
Method: GUI_UPLOAD
Thanks
<b>Allot points if this helps!</b>

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

How to push data from primary mdf file to seconday ndf files

how to push data from primary mdf file to seconday ndf files
rathnakar

I'd try them over here.
SQL Server forums on MSDN
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to load data from Quikbooks into PeopleSoft General Ledger module ?

Folks,
Hello.
My client's data is currently stored in Quikbooks.
After install PeopleSoft FSCM 9.0, I need to load the data from Quickbooks into PeopleSoft General Ledger module. But I don't know how to use PeopleSoft Integration Broker to integrate with Quikbooks.
Can any folks tell me how to load data from Quikbooks into PeopleSoft General Ledger module ?

Hi,
If the data load is one time process, then you can use PL/SQL or datamover to load the data to PeopleSoft application.
If you want to load the data in real time, then you need to create In-bound and out-bound nodes to perform the transaction.
Thanks
Soundappan

Confused How to push Data from Oracle DB Tables into Hyperion Planning?

HI
I m Newbie to ODI. My DataSource is Oracle 11g Database (HR Tables) and my Target is Hyperion Planning.
I successful imported Oracle DB HR tables into ODI and Hyperion Planning Dimensions Like(Employee) but i dont understand in " ODI Interface" how i am going to do Mapping between Oracle tables and Planning application Dimension, am i doing wrong way?
I am confused if i have to push Data from Oracle 10g HR Tables into Hyperion Planning am i following right approach ?
Looking for your guideline...
Regards
Sher

Hi John
Well i have working knowledge in ODI, i did whole complete cycle and i did customization project for Oracle EBS to Data warehouse though ODI.
What, I am NOT able to figure out How to LINK Hyperion Planning Outline to Oracle EBS HR Tables. cause in Hyperion Outline i m able to view Dimensions Not particular Column to map with EBS HR Table (column).
Eample:
In EBS HR we have Employee Number in Per_all_people_f but in Hyperion Planning Dimension is ONLY Employee.
Your response highly appreciated.
Chreeez
Sher

How to populate data from table into datagrid in form

hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks

Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

How to save data from form into database

i nid to save data from form into the new table, @abc.
got any idea ?
smtg like oObj = BaseAddOn.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes) this but it is a new object or user data source.
Thanks

hi
i have created UDO i have also done registration i want to bind item master completely to matrix and then in one column i will set check box to check unchecked and then i want to save it to database
i have one user defined form and 4 matrix and 4 child tables
for each matrix i have given 1 form and i have to transfer the data from temp form to main form matrix having large data in matrix on temp form to main form matrix
to load data on matrix i have used for loop that i want to avoid so how i can bind large data to matrix without for loop
regards
amey

How to get data from BW Cube to Another File system?

Hi,
I have a requirement to get the sales data from BW system(infoCube) to another file system as XML file using XI as a middleware. Can anybody give the suggestions on this please?
Thanks & Regards,
Satish

Take a look at the following document. You will get a fair idea how to integrate BW and XI.
BW > XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate bw via xi.pdf
XI> BW
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how to push data into bw from xi.pdf
regards
SKM

How to release data from an Infoprovider to different ERP systems

Hi all,
We cannot release DP forecasts directly to the ERP systems (as we do NOT have the required plug-ins in the ERP systems).
Therefore we will extract the DP forecasts into APO BW and now want to release the data from an InfoCube to the ERP systems.
There is a standard transaction for that but I dont know where I specify the different ERP systems and how it works. Any help very welcome!
Thanks a lot,
Johannes

Hi,
Never actually did this but did you check[Release from an InfoProvider to an ERP System|http://help.sap.com/saphelp_scm50/helpdata/en/3a/dfa841c1dae034e10000000a1550b0/frameset.htm]?

How tp push data from VDS view to Identity Store

Hi,
i have created a view in VDS which connects two datasource. Both the datasource are DB. i'm joining 2 table from two different DB server.
i want to push this view data from VDS to identity store. Please help.
Regards,
Pricy

hi Ben,
Thanks for ur reply
i have my view tree in VDS as o=join, the value seen under this tree has to be pushed to idm.
For Ex: o= join
uid=mary
uid=sam
i need to push the attributes related to mary and sam into IDM.
As specified, i have created a directory repository to point this vds, i have given the value of starting point as o=join
in the 'Fromldap' pass i nthe destination tab i have inserted the template from source which has attribute only dn.
When i run the job, it stores only the value o=join in the table.
How to get the values under o=join tree . Please help.
Regards,Pricy

Want to pull data from MDM into SAP and send it to portal.

Hi,
I have a requirement where-in i want to get some data from master data management application(a third party application) into sap and send that data to portal. Kindly suggest me on how to go about doing the same. Awaiting your kind responses guys.
Regards
Shailendra.k

Hi Shailendra,
Your requirement is a huge activity with multiple tasks which can be done in multiple ways.
Some basic points:
1. You can read data from your Third party application using
a. Native SQL or
b. a middleware as PI or
c. using connectors based on the platform of the Third party application (VB, .NET, etc.)
2. Data can be sent to portal using
a. Middleware as PI or
b. Creating RFC's
c. BAPI's.
For any specific details, you can check SDN as detailed posts on each of the above is available or can post further.
Regards,
Pranav.

How to write data from query into Real time cube?

Hi All,
Can anyone explain me step by step how to write data into a real time cube from front end queries.
Thanks in advance

Hi
You can do this using Integrated Planning
You need to create a aggregation level on the Real Time infocube and can create Planning function/sequence, Variables if needed.
Then you can create query on this aggregation level and you can make the keyfigures Input ready in property pane and you can change the data and save it into cube.
Please find below help link which clearly explains step by step about Integrated Planning like creating input ready queries etc.,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Regards
Ravi

How to insert data from site into DB?

Hi
Does anyone know how to insert data into a database from a
website?
I have created a Registration form for users to register to
my web site. With this I would like the data they have entered to
be stored in a MySQL database. I have created the a form and used
the record insertion form wizard.
When they have registered, I need to be able to check their
username every time they log in.
If anyone could help, it would be greatly appreciated,
thanks Lou.

LoobieLouLou wrote:
> When I inserted a form, I enetered a name and the method
was POST, but it also needed an action.
> How do I write in java script that it needs to be
inserted into the database?
You can't do it with JavaScript. You need to use a
server-side language
like ASP, ASP.NET, ColdFusion, or PHP. Dreamweaver automates
a lot of
the process for you, but you need to choose your server model
first.
It sounds as though you are completely new to this. First ask
your
hosting company whether it supports a server-side language,
and if so,
which one. Then open Dreamweaver help (F1) and read the
section titled
"Preparing to Build Dynamic Sites".
Working with server-side languages and databases isn't
difficult, but
it's not something you can pick up in five minutes or be
shown how to do
in a couple of forum posts.
If you can't make up your mind which server-side language to
use,
ASP.NET is the most difficult of the four I mentioned. ASP is
popular,
but is no longer actively developed, so will eventually die
out
(although it will take many years to do so). ColdFusion and
PHP are
relatively easy to learn. I prefer PHP, but all of them do
basically the
same thing. However, you must choose one; they cannot be
mixed.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

How to Retrieve data from database into another form ?

Good Day!
Am currently new at JSP. I've been studying it for awhile and still getting the hang of it. We are working on a project.
Editing a given data. We have to retrieve the given data and post it to another form "Editing form".
Since we can retrieve data using JSP but how are we going to post it to another form? I mean how are we going to transfer data from one form to another?
Can anyone help me with codes please..

The client is a web browser.
The client submits a request (click a link, visit a form)
The server gets to respond to this
- look at request parameters from the client
- access database
- produce resulting html page
- send page back to client.
The standard pattern is to retrieve data from the database in java code, and then load that data into a bean.
You then make that bean available as an attribute
It is then available for use in your JSP - either <jsp:useBean> tag or using ${ELexpressions}
All you can pass from the client to the server is request parameters - which are always strings.
Draw a picture of where the information is, and the information flows. Very rarely does it go directly from one "form" to another.
Cheers,
evnafets

How to push data from BW into SAP R/3 system???

Similar Messages

Maybe you are looking for