How to put print option in diolog programming to print the output

my requirement is to put one print button in the out put of a dialog program .
but i tried a lot but not able to solve.
so anyone could help me.
to sole the issue

Check the below link
{[code}Re: printing the dialog screen|Re: printing the dialog screen]
This may help you.

Similar Messages

How to put Mandatory option for selection screen fields in ABAP Queries

Hi Experts
Can anyone tell me how to put mandatory option for the selection screen fields in ABAP Queries.
Manually I had written code in the At Selection Screen option in infoset to display error message if that field is blank.
But I need to display the selection fields with the tick mark (obligatory mark).
How to do this?
Appropriate answers will be awarded

Hi
For parameter option
parameters : p_kunnr type kna1-kunnr obligatory.
For select option
select-options: s_date for vbak-erdat obligatory.
Plz rewards points ,
Regards ,
Ganesh.

How to put two pictures side by side without loosing the size?

how to put two pictures side by side without loosing the size? I did create a new canvas and double the size but my pictures are smaller in the new canvas please help meeeeeeee!!! my pictures are High13.6 and wide 20.533 with a resolution 240 im working on photoshop cs3 or cs6

Are you trying to print two pictures on the same sheet of paper? If so, then use Picture Package in CS3 (it is not part of CS6 unfortunately)
http://voices.yahoo.com/using-adobe-photoshop-picture-package-great-digital-614329.html

I just purchase a macbook air 13, used the bootcamp to install a windows 7 I had on CD and put on USB with a program, bud now the windows 7 don't work good, I have no internet connection and so no printer.

I read on the support / manual that I have to use Mac OS X Leopart intallation disk to install drivers for that windows.
Bud I don't have a cd like that...
So what do I do now?

Hello, So I understand that I can use bootcamp to do that...
I only take the 3 option in bootcamp, install Windows 7.
Do I have to deinstall Windows 7 and try it again with option 2 and 3 on in the boodcamp app?
I tried option 2 to download drivers on USB bud there is a network error so it won't work.
Thanks for helping me out.

Print options open slowly when choosing "printer" icon or using CTRL+P.

This has been an ongoing problem where I work. Basically we view Purchase orders through Acrobat Pro or Reader and print them to wherever they may need to go. The Problem we have, on only certain computers, is that the print options screen is very slow to open (sometimes takes about 10 seconds to show up). On other computers; it works immediatly upon clicking the printer icon or CTRL+P. This problem is slowly progressing on almost all of our computers, once it opens slowly the first time. It is never fixed. Our I.T. department has been looking into it for a long time. They have tried everything I can imagine and more to fix this. Any ideas as to what causes this or how it can be fixed? I am asking personally because it slows down my production majorly and we have a certain quota to reach. Any advise it appreciated. Thank you.

This is probably obvious but you didn't say. Is this only happening on PDFs, or does it also happen out of other programs? Large or small or does it matter? And is it always the same PDFs?

How to put Final Invoice flag in PO and close the PO automatically

Hi guys,
How to put automatically final invoice flag in PO and close PO automatically by system.
Regards
Jagadesh

Use of Final invoice indicator as follows
The final invoice indicator serves as information for the applications
    - Cash Management and Forecast
    - Cash Budget Management
    - Funds Management
If you set the final invoice indicator, purchase order commitments are
reset.
However, the final invoice indicator does not prevent further invoices
from being posted. Furthermore, it does not replace GR/IR account
maintenance in the event of a variance between GR quantity and invoice
quantity.
Automatic closing PO only possible if use ME59N to create the PO from Req other wise you have to do manually

How to put address in contacts so it works in the ...

Any tricks, how to put addresses in the address in contacts in the phone book. No matter what I try I always get the message: No results found offline.
- If you have downloaded the country map, you shouldn't need to be online !
I can see some of my contacts on map, If I take out the zip code in the address !

Hi hi, I only want to use existing address in contacts in phone book.
I did some long tests last night. And the results are these: I have to delete the post code from every single contacts, without postcode I can easily use the address for the gps in N8 ! Its a bit strange. If Im not clear enough, I want to be able to drive to contacts in phone book.
Would be interested to see if I´m the only one with this problem (because I have some more problems and they might be the phone I got), barcode scanner, contacts from exchange and now this.

Hi how to avoid nested loops in this program to improve the performence

Hi all
How to avoide the nested loops in this programing what is the replacement for the nested loops in this program coding......
LOOP AT itb_ekpo.
    READ TABLE itb_marc WITH KEY
       matnr = itb_ekpo-matnr
       werks = itb_ekpo-werks BINARY SEARCH.
    CHECK sy-subrc = 0.
FAE 26446 fin remplacement
    itb_pca-ebeln = itb_ekpo-ebeln.
    itb_pca-ebelp = itb_ekpo-ebelp.
itb_pca-lifnr = itb_ekko-lifnr.   "-FAE26446
    itb_pca-lifnr = itb_ekpo-lifnr.                         "+FAE26446
    itb_pca-ekgrp = itb_ekpo-ekgrp.                         "+FAE26446
    itb_pca-dispo = itb_ekpo-dispo.                         "+FAE26446
    itb_pca-matnr = itb_ekpo-matnr.
    itb_pca-werks = itb_ekpo-werks.
Recherche du libellé article
    READ TABLE itb_makt
               WITH KEY matnr = itb_ekpo-matnr
                        spras = text-fra
               BINARY SEARCH.
    IF sy-subrc = 0.
      itb_pca-maktx = itb_makt-maktx.
    ELSE.
      READ TABLE itb_makt
                WITH KEY matnr = itb_ekpo-matnr
                         spras = text-ang
                BINARY SEARCH.
      IF sy-subrc = 0.
        itb_pca-maktx = itb_makt-maktx.
      ENDIF.
    ENDIF.
    IF NOT itb_ekpo-bpumn IS INITIAL.
      itb_pca-menge = itb_ekpo-menge * itb_ekpo-bpumz /
                                       itb_ekpo-bpumn.
    ENDIF.
Sélect° ds la table EKES des dates de livraisons et des qtés
en transit
    CLEAR w_temoin_ar.
    CLEAR w_etens.
    LOOP AT itb_ekes
            FROM w_index_ekes.
      IF itb_ekes-ebeln = itb_ekpo-ebeln
      AND itb_ekes-ebelp = itb_ekpo-ebelp.
        IF itb_ekes-ebtyp = text-arn.
          itb_pca-eindt = itb_ekes-eindt.
          w_temoin_ar = 'X'.
        ELSE.
        Si c'est une qté en transit alors on recupere
        la quantité et la date.
          IF itb_ekes-dabmg < itb_ekes-menge.
            itb_pca-qtran = itb_pca-qtran + itb_ekes-menge -
                            itb_ekes-dabmg.
          ENDIF.
          IF itb_ekes-etens > w_etens.
            w_etens = itb_ekes-etens.
            itb_pca-dtran = itb_ekes-eindt.
          ENDIF.
        ENDIF.
      ELSEIF itb_ekes-ebeln > itb_ekpo-ebeln
      OR ( itb_ekes-ebeln = itb_ekpo-ebeln
      AND itb_ekes-ebelp > itb_ekpo-ebelp ).
        w_index_ekes = sy-tabix.
        EXIT.
      ENDIF.
    ENDLOOP.
S'il n'y a pas d'AR alors récupérat° de la date livraison dans EKET.
    LOOP AT itb_eket
            FROM w_index_eket.
      IF itb_eket-ebeln = itb_ekpo-ebeln
      AND itb_eket-ebelp = itb_ekpo-ebelp.
        IF w_temoin_ar IS INITIAL.
          itb_pca-eindt = itb_eket-eindt.
        ENDIF.
        itb_pca-slfdt = itb_eket-slfdt.
      Calcul du portefeuille fournisseur à partir de la
      qté commandée et la qté reçue
        itb_pca-attdu = itb_pca-attdu + itb_eket-menge -
                        itb_eket-wemng.
      Calcul du montant du poste
        itb_pca-netpr = itb_ekpo-netpr * itb_pca-attdu.
        IF itb_ekpo-peinh NE 0.
          itb_pca-netpr = itb_pca-netpr / itb_ekpo-peinh.
        ENDIF.
      Calcul quantité réceptionnée.
        itb_pca-wemng = itb_pca-wemng + itb_eket-wemng.
      Calcul du retard en nombre de jours calendaires
      Le calcul du retard ne doit pas prendre en compte
      le jour de livraison
        ADD 1 TO itb_eket-eindt.
        IF NOT itb_pca-attdu IS INITIAL
        AND    itb_eket-eindt LT sy-datum.
        Calcul du retard en nombre de jours ouvrés
          CLEAR w_retard.
          CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
               EXPORTING
                    date_deb = itb_eket-eindt
                    date_fin = sy-datum
               IMPORTING
                    jours    = w_retard.
          itb_pca-rtard = itb_pca-rtard + w_retard .
        ENDIF.
      ELSEIF itb_eket-ebeln > itb_ekpo-ebeln
      OR (   itb_eket-ebeln = itb_ekpo-ebeln
      AND    itb_eket-ebelp > itb_ekpo-ebelp ).
        w_index_eket = sy-tabix.
        EXIT.
      ENDIF.
    ENDLOOP.
Recherche de la derniere date de livraison.
    LOOP AT itb_mseg
            FROM w_index_mseg.
      IF itb_mseg-ebeln = itb_ekpo-ebeln
      AND itb_mseg-ebelp = itb_ekpo-ebelp.
        READ TABLE itb_mkpf
                   WITH KEY mblnr = itb_mseg-mblnr
                            mjahr = itb_mseg-mjahr
                   BINARY SEARCH.
        IF sy-subrc = 0.
          IF itb_mkpf-bldat > itb_pca-bldat.
            itb_pca-bldat = itb_mkpf-bldat.
          ENDIF.
        ENDIF.
      ELSEIF itb_mseg-ebeln > itb_ekpo-ebeln
      OR (   itb_mseg-ebeln = itb_ekpo-ebeln
      AND    itb_mseg-ebelp > itb_ekpo-ebelp ).
        w_index_mseg = sy-tabix.
        EXIT.
      ENDIF.
    ENDLOOP.
    APPEND itb_pca.
    CLEAR itb_pca.
FAE26446 suppression parag. suivant
     ELSEIF itb_ekpo-ebeln > itb_ekko-ebeln.
       w_index_ekpo = sy-tabix.
       EXIT.
     ENDIF.
   ENDLOOP.
Fin FAE26446
ENDLOOP.
Thanks in advance for all.....

Hi
these are the performance tips
Instead of using nested Select loops it is often better to use subqueries.
SELECT * FROM SPFLI
INTO TABLE T_SPFLI
WHERE CITYFROM = 'FRANKFURT'
    AND CITYTO = 'NEW YORK'.
SELECT * FROM SFLIGHT AS F
    INTO SFLIGHT_WA
    FOR ALL ENTRIES IN T_SPFLI
    WHERE SEATSOCC < F~SEATSMAX
      AND CARRID = T_SPFLI-CARRID
      AND CONNID = T_SPFLI-CONNID
      AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
The above mentioned code can be even more optimized by using subqueries instead of for all entries.
SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
    WHERE SEATSOCC < F~SEATSMAX
      AND EXISTS ( SELECT * FROM SPFLI
                     WHERE CARRID = F~CARRID
                       AND CONNID = F~CONNID
                       AND CITYFROM = 'FRANKFURT'
                       AND CITYTO = 'NEW YORK' )
      AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
<b>Internal Tables</b>
1.     Table operations should be done using explicit work areas rather than via header lines.
2.     Always try to use binary search instead of linear search. But dont forget to sort your internal table before that.
3.     A dynamic key access is slower than a static one, since the key specification must be evaluated at runtime.
4.     A binary search using secondary index takes considerably less time.
5.     LOOP ... WHERE is faster than LOOP/CHECK because LOOP ... WHERE evaluates the specified condition internally.
6.     Modifying selected components using MODIFY itab TRANSPORTING f1 f2.. accelerates the task of updating a line of an internal table.
Point # 2
READ TABLE ITAB INTO WA WITH KEY K = 'X BINARY SEARCH.
IS MUCH FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY K = 'X'.
If TAB has n entries, linear search runs in O( n ) time, whereas binary search takes only O( log2( n ) ).
Point # 3
READ TABLE ITAB INTO WA WITH KEY K = 'X'. IS FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY (NAME) = 'X'.
Point # 5
LOOP AT ITAB INTO WA WHERE K = 'X'.
ENDLOOP.
The above code is much faster than using
LOOP AT ITAB INTO WA.
CHECK WA-K = 'X'.
ENDLOOP.
Point # 6
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1 TRANSPORTING DATE.
The above code is more optimized as compared to
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1.
7.     Accessing the table entries directly in a "LOOP ... ASSIGNING ..." accelerates the task of updating a set of lines of an internal table considerably
8.    If collect semantics is required, it is always better to use to COLLECT rather than READ BINARY and then ADD.
9.    "APPEND LINES OF itab1 TO itab2" accelerates the task of appending a table to another table considerably as compared to LOOP-APPEND-ENDLOOP.
10.   DELETE ADJACENT DUPLICATES accelerates the task of deleting duplicate entries considerably as compared to READ-LOOP-DELETE-ENDLOOP.
11.   "DELETE itab FROM ... TO ..." accelerates the task of deleting a sequence of lines considerably as compared to DO -DELETE-ENDDO.
Point # 7
Modifying selected components only makes the program faster as compared to Modifying all lines completely.
e.g,
LOOP AT ITAB ASSIGNING <WA>.
I = SY-TABIX MOD 2.
IF I = 0.
    <WA>-FLAG = 'X'.
ENDIF.
ENDLOOP.
The above code works faster as compared to
LOOP AT ITAB INTO WA.
I = SY-TABIX MOD 2.
IF I = 0.
    WA-FLAG = 'X'.
    MODIFY ITAB FROM WA.
ENDIF.
ENDLOOP.
Point # 8
LOOP AT ITAB1 INTO WA1.
READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
IF SY-SUBRC = 0.
    ADD: WA1-VAL1 TO WA2-VAL1,
         WA1-VAL2 TO WA2-VAL2.
    MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
ELSE.
    INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
The above code uses BINARY SEARCH for collect semantics. READ BINARY runs in O( log2(n) ) time. The above piece of code can be more optimized by
LOOP AT ITAB1 INTO WA.
COLLECT WA INTO ITAB2.
ENDLOOP.
SORT ITAB2 BY K.
COLLECT, however, uses a hash algorithm and is therefore independent
of the number of entries (i.e. O(1)) .
Point # 9
APPEND LINES OF ITAB1 TO ITAB2.
This is more optimized as compared to
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 10
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING K.
This is much more optimized as compared to
READ TABLE ITAB INDEX 1 INTO PREV_LINE.
LOOP AT ITAB FROM 2 INTO WA.
IF WA = PREV_LINE.
    DELETE ITAB.
ELSE.
    PREV_LINE = WA.
ENDIF.
ENDLOOP.
Point # 11
DELETE ITAB FROM 450 TO 550.
This is much more optimized as compared to
DO 101 TIMES.
DELETE ITAB INDEX 450.
ENDDO.
12.   Copying internal tables by using ITAB2[ ] = ITAB1[ ] as compared to LOOP-APPEND-ENDLOOP.
13.   Specify the sort key as restrictively as possible to run the program faster.
Point # 12
ITAB2[] = ITAB1[].
This is much more optimized as compared to
REFRESH ITAB2.
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 13
SORT ITAB BY K. makes the program runs faster as compared to SORT ITAB.
Internal Tables         contd
Hashed and Sorted tables
1.     For single read access hashed tables are more optimized as compared to sorted tables.
2.      For partial sequential access sorted tables are more optimized as compared to hashed tables
Hashed And Sorted Tables
Point # 1
Consider the following example where HTAB is a hashed table and STAB is a sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE HTAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
This runs faster for single read access as compared to the following same code for sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE STAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
Point # 2
Similarly for Partial Sequential access the STAB runs faster as compared to HTAB
LOOP AT STAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
This runs faster as compared to
LOOP AT HTAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
<b>Reward if usefufll</b>

How to put a footer text in every page of the application

How to put footer text in every page of the application without putting it page by page.
Thanks.
Jen

Patick,
Thanks for your reply.
I still don't know how to do it.
1. Have a look at the documentation for Page 0.
There is no Page 0 in my application
2. You can add your custom stuff to your page templates.
Could you give me more detail on this?
Thanks,
Jen

Giant print font from internet programs when printing with Firefox

When printing from any internet application when I use the print hot link or the printer from the tool bar the print is GIGANTIC. A single page prints on 4 pages. I logged in to Internet Explorer and I do not have this problem from that browser. I went to about:config and reset the printer and still the same problem. I have printed from maps.google.com, from my online banking and credit card apps. When printing from email and printing .pds' no problem. When print Word documents, no problem. Something changed in Firefox and I can't find it for the life of and I am wasting a lot of paper. Please advise.

Please check you are logged in, and try again.
Why do I get this ERROR message when I try to confirm my question by clicking on the link in the email?

Calling a transaction code in between the program and use the output

Hi frnds,
i want to call a transaction code in between the program and pass the input .After getting the output, use that output in the program

Hi Navin,
Why don't you sit with ABAPer he can explain better.
Regards,
HAri.

How to make my vocal recordings louder without blowing out the output and ruining my recording?

When I record my audio through my mic, the vocals sound good but are a little low. When I raise the gain on the tracks however, the output audio blows out and sounds scratchy so I cant create a good song unless the volume is low. How can I fix this?

As Art of Sound hints at....
It's not really a "fix" that can be presented as nothing is wrong with Logic, it's you learning to use the tools you have.
Also, although it's just terminology... a "good song" has nothing to do with volume, what you mean is how can I get the volume of my song up to the level of commercial recordings, right?
Don't forget that much of the commercial stuff you hear is produced my composers/engineers that may have been doing this for years, using equipment that costs thousands and thousands of dollars. It's actually easy to get things LOUD, but it takes experience to get things ~Loud~ and retain all of the quality & balance.
AOS has pointed you in the right direction.

How do i get print to pdf option in MS programs under printer select screen?

Hello there how do i install the print to PDF option in printer select box within MS programs

Are you a subscriber to Adobe PDF Pack?

How to put "selection options without intervals" on screen painter?

Hello all,
       I need to put a field for pernr(personal number) on screen painter (module program) and user should be able to enter a list of pernr's to process. I know in report program I can do this by:
SELECT-OPTIONS: s_lpernr FOR pa001-pernr NO INTERVALS.
How can I get this work on sccreen painter in module programming? How can I add a field on screen painter with a range without intervals? Please let me know.
Thanks.
Mithun.

You can also do this using the function module COMPLEX_SELECTIONS_DIALOG.
REPORT ZTEST_SCREEN                            .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
        INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA:     V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
       V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module GET_CURSOR_USERNAME INPUT
*       text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR   IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR   IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      DYNAME               = V_PROG
      DYNUMB               = V_DNUM
      TRANSLATE_TO_UPPER   = 'X'
    TABLES
      DYNPFIELDS           = IT_DYNPFIELDS
    EXCEPTIONS
      INVALID_ABAPWORKAREA = 1
      INVALID_DYNPROFIELD = 2
      INVALID_DYNPRONAME   = 3
      INVALID_DYNPRONUMMER = 4
      INVALID_REQUEST      = 5
      NO_FIELDDESCRIPTION = 6
      INVALID_PARAMETER    = 7
      UNDEFIND_ERROR       = 8
      DOUBLE_CONVERSION    = 9
      STEPL_NOT_FOUND      = 10
      OTHERS               = 11.
IF SY-SUBRC EQ 0.
    READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
    IF SY-SUBRC = 0.
      V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
    ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE.                 " GET_CURSOR_USERNAME INPUT
*&      Form GET_MULTIPLE
*       text
* --> p1        text
* <-- p2        text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
    IF NOT V_USERNAME IS INITIAL.
      R_UNAME-SIGN = 'I'.
      R_UNAME-OPTION = 'EQ'.
      R_UNAME-LOW = V_USERNAME.
      APPEND R_UNAME.
      CLEAR R_UNAME.
    ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
    EXPORTING
      TITLE             = 'Select Multiple Value'(059)
      TEXT              = 'Finish Group'(058)
      SIGNED            = 'X'
      LOWER_CASE        = ' '
      NO_INTERVAL_CHECK = 'X'
      JUST_DISPLAY      = ' '
      JUST_INCL         = 'X'
    TABLES
      RANGE             = <FST>
    EXCEPTIONS
      NO_RANGE_TAB      = 1
      CANCELLED         = 2
      INTERNAL_ERROR    = 3
      OTHERS            = 4.
IF SY-SUBRC EQ 0.
    READ TABLE R_UNAME INDEX 1.
    IF SY-SUBRC = 0.
      V_USERNAME = R_UNAME-LOW.
    ENDIF.
ENDIF.
ENDFORM.                    " GET_MULTIPLE

How to use parameter option in smartform program line.

HI all,
how can i give parameter for matnr directly in smartform program line, it wont take gives a dump
i don wanna create a separate driver program for that.
Error in the ABAP Application Program
The current ABAP program "/1BCDWB/SF00000001============FT" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1BCDWB/SAPLSF00000001 " in
include "/1BCDWB/LSF00000001F01 " in
line 539:
"You can only use "PARAMETERS" for programs other than type 1 between B"
"EGIN/END OF SCREEN."
The include has been created and last changed by:
Created by: "SAPUSER "
Last changed by: "SAPUSER "
how can i solved this.
Kavinath B.

Hi,
You can not code
SELECTION-SCREEN BEGIN OF BLOCK.
SELECT-OPTIONS selcrit FOR (name).
SELECTION-SCREEN END OF BLOCK.
like this in smartform program line it wont allow
all you have to do is create a driver program
for smartform create a selection screen and call smartform by
n pass variables or internal tables.
call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
      formname                 =
*     VARIANT                  = ' '
*     DIRECT_CALL              = ' '
*   IMPORTING
*     FM_NAME                  =
*   EXCEPTIONS
*     NO_FORM                  = 1
*     NO_FUNCTION_MODULE       = 2
*     OTHERS                   = 3
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
I hope it will help u
Ketan.P

How to put print option in diolog programming to print the output

Similar Messages

Maybe you are looking for