How to put two arrays in one program?

And also I am comfused by "use at least 1 additional method doing a well-defined task".What actually ask me to do ?
Cheers.

public class TwoArrays {
int[] oneArray;
String[] anotherArray;
use at least 1 additional method doing a well-defined taskNo idea. It's your homework, dude. I was given the requirement "find out how much of it's already been done" yesterday. Any idea what that meant?

Similar Messages

How to put two ipods on one computer

how to put two ipods on one computer

Set up the second exactly the same way as you set up the first. If iTunes is already installed, it doesn't need to be installed again.
(64746)

How to put two devices on one Data plan?

I've had my phon with a 2gb Data plan for about a year and just recently bought a Jetpack with a 6gb Data plan to replace my original and be shared between the two.
A month later I get my bill and find im still being charged for both. I kind of expect this seeing as I didn't buy the new plan when my original bill was scheduled for payment.
Two months after, Im still paying for both. And what's worse, Im being overcharged with my phone Data plan because I had thought I had more Data to use.
I've tried going back to the retailer, but the just directed me to contact Verizon. I've made very many attempts to contact Verizon, to no avail. Whether it be through calling, Chat, forums, anything. I can't find any direct email for customer support. I am angry and very unhappy with the service.
Any suggestions on either getting in contact with Verizon (my available calling hours never seem to match up with theirs) or fixing it myself if possible. Thank you.

If you're on the old Nationwide plans data between devices can not be shared. You need to be on Share Everything to share Data. Of course if you didn't become a Verizon customer until after June 28th 2012 you SHOULD be on Share Everything.
For the record a Share Everything plan with a smartphone a jetpack and 8 GB of data would be $150 plus taxes/fees

How do I put two songs in one movie

I was wanting to know how to put two songs in one movie because I am making a holiday movie so I was wanting to know

You can only use one audio track per movie. If your movie is shorter than the audio track, then the audio track fades out automatically. If your movie is longer than the audio track, then the audio track loops automatically.
Also note that only non-DRM music can be added to a project.

About combing two array into one

Hi all,
I post a questiona bout converting an array of integer into char (byte) array and I got a solution already http://forums.ni.com/t5/LabVIEW/how-to-display-char-code-properly/m-p/2596087#M780368
However, I enouther another problem while dealing with an array of U16 type. I would like to extract the high and low byte from numbers (U16) stored in array. I extract the high and low byte for each U16 number and convert them as char, concatenate them to a string. Repeat this process for each element in the array so to get a big string with each element is a char for high and low byte. My code is enclosed as follows
It works fine but I am concerning the speed. Is that any other way to do it fast and don't use loop (in real case, I will deal with pretty big array many times, efficiency is a problem). Note that the high and low bytes array extracted from the original array with the module Split number.vi, but how can I combine these two array in one code with data arranged as high-low-high-low ... ? Thanks.
Solved!
Go to Solution.

PKIM wrote:
However, I enouther another problem while dealing with an array of U16 type. I would like to extract the high and low byte from numbers (U16) stored in array. I extract the high and low byte for each U16 number and convert them as char, concatenate them to a string. Repeat this process for each element in the array so to get a big string with each element is a char for high and low byte. My code is enclosed as follows
It works fine but I am concerning the speed. Is that any other way to do it fast and don't use loop (in real case, I will deal with pretty big array many times, efficiency is a problem). Note that the high and low bytes array extracted from the original array with the module Split number.vi, but how can I combine these two array in one code with data arranged as high-low-high-low ... ? Thanks.
You need to be more clear.
Looking at the code, you are dealing with I16, not U16. Also your index array primitives could be replaced by autoindexing. Your use of the feedback node only makes sense if you want to append strings forever with stale data, thus growing data structures without limits. If you only want to convert the current data, remove the feedback mode and use a "concatenate strings" with a single input. A for loop is one of the most efficient data structures and using it is not a problem. One way or another the code needs top oerate on all data.
All that said, I agree with Tim that most likely all you need to do is insert a typecast after the "to I16" and eliminate all other code.
LabVIEW Champion . Do more with less code and in less time .

Can i put two ipods on one itunes

can i put two ipods on one itunes

The OP didn't ask how. They only asked if it was possible, which would consist of either a yes or no answer, which is exactly what Niel provided.
If the OP wanted more information, they will respond asking for more information.
B-rock

How to set two radius servers one is window NPS another is cisco radius server

how to set two radius servers one is window NPS another is cisco radius server
when i try the following command, once window priority is first , i type cisco radius user name, it authenticated fail
i can not use both at the same time
radius-server host 192.168.1.3 is window NPS
radius-server host 192.168.1.1 is cisco radius
http://blog.skufel.net/2012/06/how-to-integrating-cisco-devices-access-with-microsoft-npsradius/
conf t
no aaa authentication login default line
no aaa authentication login local group radius
no aaa authorization exec default group radius if-authenticated
no aaa authorization network default group radius
no aaa accounting connection default start-stop group radius
aaa new-model
aaa group server radius IAS
server 192.168.1.1 auth-port 1812 acct-port 1813
server 192.168.1.3 auth-port 1812 acct-port 1813
aaa authentication login userAuthentication local group IAS
aaa authorization exec userAuthorization local group IAS if-authenticated
aaa authorization network userAuthorization local group IAS
aaa accounting exec default start-stop group IAS
aaa accounting system default start-stop group IAS
aaa session-id common
radius-server host 192.168.1.1 auth-port 1812 acct-port 1813
radius-server host 192.168.1.2 auth-port 1812 acct-port 1813
radius-server host 192.168.1.3 auth-port 1645 acct-port 1646
radius-server host 192.168.1.3 auth-port 1812 acct-port 1813
privilege exec level 1 show config
ip radius source-interface Gi0/1
line vty 0 4
authorization exec userAuthorization
login authentication userAuthentication
transport input telnet
line vty 5 15
authorization exec userAuthorization
login authentication userAuthentication
transport input telnet
end
conf t
aaa group server radius IAS
server 192.168.1.3 auth-port 1812 acct-port 1813
server 192.168.1.1 auth-port 1812 acct-port 1813
end

The first AAA server listed in your config will always be used unless/until it becomes unavailable. At that point the NAD would move down to the next AAA server defined on the list and use that one until it becomes unavailable and then move to third one, and so on.
If you want to use two AAA servers at the same time then you will need to put a load balancer in front of them. Then the virtual IP (vip) will be listed in the NADs vs the individual AAA servers' IPs.
I hope this helps!
Thank you for rating helpful posts!

Putting two columns in one

Hey Guys,
there is my next question on sql.
It is possible to put two columns in one and when, how do I implement it? If there is an opportunity, may I asked to explain it on a example. =)
best regards
wderr

You can use concatenation:
SQL> create table a (a1 varchar2(10), a2 varchar2(10));
Table created.
SQL> insert into a values ('str1','str2');
1 row created.
SQL> select a1, a2, a1||a2
2 from a;
A1 A2 A1||A2
str1 str2 str1str2
1 row selected.Max
[My Italian Oracle blog| http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

I forgot my password for my apple ID. Any ideas on how to put in a new one without knowing the old one?

I forgot my password for my Apple ID. Anyone have a solution on how to put in a new one without knowing the old one?
Thanks

Welcome to Apple Support Communities
You have to reset your password. You can do this in this site > http://iforgot.apple.com

How to sync two IPhone with one PC , but with different applications

How to sync two IPhone with one PC , but with different applications ?
We have two IPhones , but one PC , we want to sync separately , is that possible ?

Absolutely, connect each phone, select what content you want on each phone, then hit the sync button. iTunes will keep everything straight, by device, upon subsequent syncs, including separate backups.

HOW TO PUT TWO PANNEL IN THE SAME PAGE

HI ALL
I NEED TO KNOW HOW TO PUT TWO PANNEL IN THE SAME PAGE TO FULLY UTILIZE FULL PAGE AREA BECAUSE THE PANNEL WIDTH IS TOO SMALL , SO I WANT TO MAKE THE PAPER CONTAIN TO PANNELS VERTICALLY.
THANK YOU

So Barb,
I like to use multiple desktops and move back and forth between then using gestures. At the moment I have 5 open: Chrome, Firefox, Safari, Photoshop CS 6 and a desktop. I use "gestures" to navigate between them:
Mac Basics: Multi-Touch gestures - Apple Support
and I use Mission Control (F3) to move the various desktops around in the order I want them.
Mac Basics: Mission Control - Apple Support
So say I'm searching for a photo to open in CS 6, I find it on the open desktop then hit select "open" in CS 6 and go to that folder in the select pane.
Even right now I'm typing this in Safari and "gesturing" back to Chrome where I did the search about multi touch and mission control. I drag copy the URL there and gestured back here to paste the URL into this text.
If you did a lot of photo searches, I set professional clients of mine in Chicago up with dual monitors (In this case you'd have an external monitor on extended desktop.). So all you need to do is just glance over at the second monitor slide your cursor over there open stuff up find your photo and go back to Photoshop and open it up.
Hope this helps.

Using iMovie-does anyone knows how to put two videos side by side in the same screen/

Using iMovie-Does anyone knows how to put two videos side by side in the same screen?

See iMovie Help here.
http://help.apple.com/imovie/mac/10.0/#movb8c659f55

How to put selected videos in one place so I can only show those on my TV and not ALL of the videos I have ever taken.

How to put SELECTED videos in one place, so I can ONLY show the SELECTED videos on my TV and not ALL of the videos I have ever taken

YYou have to describe your issue in more detail. Are you using iTunes? Trying to see it in Apple TV, etc, etc.

How to put two pictures side by side without loosing the size?

how to put two pictures side by side without loosing the size? I did create a new canvas and double the size but my pictures are smaller in the new canvas please help meeeeeeee!!! my pictures are High13.6 and wide 20.533 with a resolution 240 im working on photoshop cs3 or cs6

Are you trying to print two pictures on the same sheet of paper? If so, then use Picture Package in CS3 (it is not part of CS6 unfortunately)
http://voices.yahoo.com/using-adobe-photoshop-picture-package-great-digital-614329.html

How to copy pf-status from one program to another program

Hi Gurus,
Can any one tell me the procedure how to copy pf-status of one program to another program .if i want to copy pf-status which is in production server to development server how can i do this.pls help me out.
Regards.

Hi,
GO TO SE41,
Select Status,
In from u can give ur old pgm and staus name
In To u can ur new one .
Save and activate.
Regards,
S.nehru.

How to put two arrays in one program?

Similar Messages

Maybe you are looking for