How to query data from grid cache group after created global AWT group
It is me again.
as I mentioned in my previous posts, I am in progress of setup IMDB grid environment, and now I am at stage of creating cache group. and I created global AWT cache group on one node(cachealone2), but I can not query this global cache group from another node(cachealone1)
thanks Chirs and J, I have done successfully setup IMDB grid env, and have two node in this grid as below
Command> call ttGridNodeStatus;
< MYGRID, 1, 1, T, igs_imdb02, MYGRID_cachealone1_1, 10.214.10.176, 5001, <NULL>, <NULL>, <NULL>, <NULL>, <NULL> >
< MYGRID, 2, 1, T, igsimdb01, MYGRID_cachealone2_2, 10.214.10.119, 5002, <NULL>, <NULL>, <NULL>, <NULL>, <NULL> >
2 rows found.
and I create group ATW cache group on cachealone2
Command> cachegroups;
Cache Group CACHEUSER.SUBSCRIBER_ACCOUNTS:
Cache Group Type: Asynchronous Writethrough global (Dynamic)
Autorefresh: No
Aging: LRU on
Root Table: ORATT.SUBSCRIBER
Table Type: Propagate
1 cache group found.
Command> SELECT * FROM oratt.subscriber;
0 rows found.
however I can not query this from another node cachealone1
Command> SELECT * FROM oratt.subscriber WHERE subscriberid = 1004;
2206: Table ORATT.SUBSCRIBER not found
The command failed.
Command> SELECT * FROM oratt.subscriber WHERE subscriberid = 1004;
2206: Table ORATT.SUBSCRIBER not found
The command failed.
Command> SELECT * FROM oratt.subscriber;
2206: Table ORATT.SUBSCRIBER not found
this is example from Oracle docs, I an not sure where I missed for this. thanks for your help.
Sounds like you have not created the Global AWT cache groupo in the second datastore? There is a multi-step process needed to roll out a cache grid and various things must be done on each node in the correct order. have you done that?
Try checking out the QuickStart example here:
http://download.oracle.com/otn_hosted_doc/timesten/1121/quickstart/index.html
Chris
Similar Messages
-
How to query data from Oracle, MySQL, and MSSQL?
For an environment consisting of Oracle 11g/12c enterprise edition, MySQL 5.7 community edition, and MSSQL 2008/2012 stanard/enterprise edition, is there any major issue using DG4ODBC to query data from all 3 platforms?
Is there other free alternatives?
If the queried data is mostly contained in MySQL or MSSQL, will it be more efficient to query from MySQL or MSSQL?
If yes, any suggestion of how to do it in those platforms? I know MSSQL can use linked server but it is quite slow.mkirtley-Oracle wrote:
Hi Ed,
It is semantics. By multiple instances I mean you have the gateway installed in an ORACLE_HOME which has 1 listener. However, if you are connecting to different non-Oracle databases or different individual databases of that non-Oracle database then you need multiple gateway instances for each database being connected. I did not mean that you need a gateway installed in a separate ORACLE_HOME for each non-Oracle database to which you are connecting.
Each of these would have a separate instance file within that ORACLE_HOME/hs/admin directory with the connection details for the non-Oracle database to which that instance connects.. So, you would have -
initgtw1.ora - connects to MySQL
initgtw2.ora - connect to SQL*Server northwind database
initgtw3.ora - connect to SQL*Server test database
etc
etc
Each of these instances would have a separate entry in the gateway listener.ora.
In MOS have a look at this note -
How To Add A New Database or Destination To An Existing Gateway Configuration (Doc ID 1304573.1)
Regards,
Mike
Ah yes, we are in agreement, it was just semantics. Thanks. -
How to query data from other Database
Dear Community;
Please help me, I want to connect with another Database in apex query. I have been created TNS and also query run proper in Toad, but when I give schema name with table it does not run and give error.
So how I can use this query in Apex.
Regards
Shahab Ahmed KhanWe do this by creating a database link from DB1 (Apex database) to DB2 (main database) then writing queries like this in Apex:
select foo, bar from atable@db2 -
How to query data from database and store it into Managed Bean ?
Hi all,
In our application we have requirement to store information within Managed Bean to be accessed by ADF pages.
The information is stored in database tables.
The question is :
What is the efficient / recommended way to do that ?
I do not use apps module to query the data because the information is required in View layer not the model layer
Thank you for your help,
xtantoXtanto,
if the information is stored in the database then the question is if there is a database connect open already. If yes, then why not using this connection to query for the data you want to access and store. Alternatively you can directly open a JDBC connection in a managed bean or access an EJB session bean. However, this comes with the price of an extra database connection.
Make sure the managed bean is in session scope if you want to share the information without re-fetching it
Frank -
How to Retrieve data from Variant Table
Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?
Hello Mohan,
if u already have data and u want to populate it in F4 help then use below code -
u Have to make use of FM - 'F4IF_INT_TABLE_VALUE_REQUEST'
REPORT ZGILL_VALUE_REQUEST .
data: begin of lt_all occurs 0.
include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
code LIKE zgill_main-PERNR,
END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr. "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ECODE'
dynpprog = sy-repid
dynpnr = no_dyn
dynprofield = 'ECODE'
window_title = 'Employee Details'
value_org = 'S'
DISPLAY = 'F'
TABLES
value_tab = lt_code
RETURN_TAB = lt_selected.
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE. -
Use evdre to query data from a SQL View
Hi all
I believe that it is possible to use evdre to query data from a SQL View. If this is possible then how does one go about setting it up in the evdre options (assuming that the view has already been created)?
Regards,
ByronByron, perhaps this is no longer supported, it might be worth opening up a case at service.sap.com on this. However, I did find the following on Page 11 of the "Usages and Considerations of EVDRE" pdf file. This doc is imbedded in the helpfile for BPC 7 SP5 (which was released in August of 2009, well after note 1315011 was last updated.
It looks like you are limited to one custom view per application, since you have to name the view in a parameter at the APPLICATION level. Go into BPC Administration, login to the application related to the custom view, choose "Set Application Parameters" and enter the name of the view to the Application Parameter called "EVDRE_QUERYVIEWNAME" If it is not listed, go ahead and create it at the bottom of the Application parameter screen.
Also: I interpreted the following info from Page 10 of the same doc:
In your EVDRE, set the following options:
QueryEngine: MANUAL
QueryType: enter either NEXJ OR TUPLE see below:
NEXJ - Use two-dimensional queries using the nonemptycrossjoin function
TUPLE - Use two-dimensional queries using tuples"
And I'm assuming you'd enter a Y for the following two parameters:
QueryViewName
"..to enforce the query engine to use a used-defined SQL view of the fact tables, when trying to read the values using SQL queries. This option is typically used in conjunction with the SQLOnly option (see below). "
Option SQLOnly
"..to enforce the query engine to only execute SQL queries, when reading data. This can be achieved using this option." -
How to get data from Oracle using Native SQL in SAP.. Problem with date
Hi Masters.
I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
I wrote this code and it works fine without the statement of where date > '01-09-2010'
But i need that statement on the select. I read a lot about this issue, but no answer.
My code is (this code is in SAP ECC 6.0)
DATA: BEGIN OF datos OCCURS 0,
id_numeric(10),
component_name(40),
comuna(10),
record_id(10),
status,
sampled_date(10),
END OF datos.
DATA: c TYPE cursor.
EXEC SQL.
connect to 'LIM' as 'MYDB'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'MYDB'
ENDEXEC.
EXEC SQL PERFORMING loop_output.
SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
into :datos from lims.SAMP_TEST_RESULT
where date > '01-09-2010'
ENDEXEC.
EXEC SQL.
disconnect 'MYDB'
ENDEXEC.
How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
Any help
RegardsPlease refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804] -
Problem in getting the data from a cache in hibernate
I am storing data inside a cache. When i am geeting the data from a cache its showing null.
How can i retrieve the data from a cache.
I am using EHCacheHi ,
You have done one mistake while setting the input parameters for BAPI..Do the following steps for setting input to BAPI
Bapi_Goodsmvt_Getitems_Input input = new Bapi_Goodsmvt_Getitems_Input();
wdContext.nodeBapi_Goodsmvt_Getitems_Input().bind(input);
Bapi2017_Gm_Material_Ra input1 = new Bapi2017_Gm_Material_Ra();
wdContext.nodeBapi2017_Gm_Material_Ra().bind(input1);
Bapi2017_Gm_Move_Type_Ra input2 = new Bapi2017_Gm_Move_Type_Ra();
wdContext.nodeBapi2017_Gm_Move_Type_Ra().bind(input2);
Bapi2017_Gm_Plant_Ra input3 = new Bapi2017_Gm_Plant_Ra();
wdContext.nodeBapi2017_Gm_Plant_Ra().bind(input3);
Bapi2017_Gm_Spec_Stock_Ra input4 = new Bapi2017_Gm_Spec_Stock_Ra();
wdContext.nodeBapi2017_Gm_Spec_Stock_Ra().bind(input4);
input1.setSign("I");
input1.setOption("EQ");
input1.setLow("1857");
input2.setSign("I");
input2.setOption("EQ");
input2.setLow("M110");
input3.setSign("I");
input3.setOption("EQ");
input3.setLow("309");
input4.setSign("I");
input4.setOption("EQ");
input4.setLow("W");
wdThis.wdGetWdsdgoodsmvmtcustController().execute_BAPI_GOODSMOVEMENT_GETITEMS();
Finally inavidate your output node like
wdContext.node<output node name>.invalidate();
also put your code inside try catch to display any exception if any
Regards,
Amit Bagati -
How to populate data from table into datagrid in form
hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks
Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null. -
JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC
Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
KumarHI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla.. -
How to Save Data from DataGrid to Excel Sheet?
Hi All,
I am trying to use Adobe Flex 3.0 for making web pages.
I want to save the data from DataGrid and Advanced DataGrid of Adobe Flex 3.0 to Excel Sheet file. I am trying Flex Help, but didn't find answer for it.
In the application there is a button for 'save' by pressing which the 'Save As' window should appear.
And giving the path to the '.xls' file, the data from DataGrid should be saved on that location in .xls format.
This is my requirement.
If anybody knows how to do this please help.
Thank You,
SharadHi
Using document.applet.saveAsCSVFile(); code you can not get data in proper format.
For one of my application i have stored the data from Grid to excel.
But i am not sure about Adobe Flex 3.0, my code will work or not.
Also you need to make the "Initialize and Script Activex Control Not marked as Safe" as enabled in your IE.
You can share ur email. So that i can send the code. Here I am not able to paste the code.
Thanks -
How to extract data from XML file with JavaScript
HI All
I am new to this group.
Can anybody help me regarding XML.
I want to know How to extract data from XML file with JavaScript.
And also how to use API for XML
regards
NagarajuThis is a Java forum.
JavaScript is something entirely different than Java, even though the names are similar.
Try another website with forums about JavaScript.
For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3 -
i have three tables A,B,C. there is one to many relation between A and B. and one to many relation existed between table b and c . how will get data from these three tables
check if this helps:
select * --you can always frame your column set
from tableA a
left join tableB b on a.aid=b.aid
left join tableC c on c.bid=b.bid
This is just a general query. However, we can help you a lot more, if you can post the DDL + sample data and required output.
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
Help - Step by Step Material on How to load Data from flatfile to BI 7.0
Hi BI Experts,
Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
Thanks in Advance
Regards
Ramakrishna Kamurthy
+91-99631010731. On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
1. You see the screen divided in two segments.
2. Follow the left segment.
3. Click on the Business Information Warehouse.
4. Sub Menu  BW Administration.
5. You find various entries in it.
6. Now double click on UG_BW_RSA1-Administrator Workbench
2. Creation of Info Area
1. Click on InfoObjects.
2. Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
3. A dialog box pops up.
4. Give the InfoArea as ZIVY_Iarea.
5. Give the Long Description as ZIVY Info Area.
3. Create a Catalog:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_CHCAT
i. Description = ZIVY Character Catalog
ii. InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CUST and
i. Description Customer Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CUST: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP .
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_CUST, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_CITY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CITY and
i.
Description
Customer
City Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CITY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_STATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_STATE and
i.
Description
Customer
State Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_STATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_CTRY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CTRY and
i. Description Customer Country Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CTRY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
1. Creation of Attributes and InfoObject from the ZIVY_CUST InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
6. You find the screen Change Characteristic ZIVY_CUST:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_STATE, ZIVY_CTRY.
11. Now, we will create another InfoObject ZIVY_TEL, from here.
12. So type ZIVY_Tel and enter the ENTER KEY.
13. A dialog box pops up, and request you If you want to Create an InfoObject
14. Select Create Attribute As Characteristic and click the check mark.
15. Another window pops up. Give the following:
i. In the General Tab:
1. Long Description: ZIVY Telephone Number
2. Short Description: ZIVY Telephone Number
3. DataType : NUMC
4. Length : 10
5. Uncheck Attribute Only
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies
iv. Now click the TICK MARK
1.
1. Click the ACTIVATE
2. A window pops up.
i. Select activate dependent InfoObjects.
ii. Click the Check Mark.
1. Creation of InfoObject: ZIVY_DATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_DATE and
i. Description ZIVY Date.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_DATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: DATS
2. Length: 8
ii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
2. Create ZIVY Application Component:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Right click the mouse pointer and select the entry Create Application Component
5. A window pops up.
i. Application Component: ZIVY_APPCOMP
ii. Long Description : ZIVY Application Component
iii. Click the check mark.
1. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_CUST
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the Customer Info Object.
2. Select the Customer Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_CUST
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_CUST,
3. Second field is ZIVY_CITY.
4. And so on.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_CUST,
4. Third field is 0TXTMD.
5. Click the Transfer Rule adjacent to 0LANGUAGE
6. A window pops up.
a. Check the CONSTANT and give the value as EN
b. Click the TICK MARK.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_CUST_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_CUST_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_ATTR.
ii. Select ZIVY_CUST_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_TEXT.
ii. Select ZIVY_CUST_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_MAT and
i. Description ZIVY Material Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_MAT: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_MAT, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_GROUP
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_GROUP and
i. Description ZIVY Material Group.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_GROUP: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_COLOR
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_COLOR and
i. Description ZIVY Material Color.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_COLOR: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
2. Creation of InfoObject from the ZIVY_MAT InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
6. You find the screen Change Characteristic ZIVY_MAT:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_COLOR.
11. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_MAT
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Material Info Object.
2. Select the ZIVY Material Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_MAT
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_MAT,
3. Second field is ZIVY_GROUP.
4. Third field is ZIVY_COLOR.
5. Check the mapping. If you dont see the mapping.
6. Click on the empty row in the group Assign InfoObjectField, the box to the right.
7. Type ZIVY_GROUP, ZIVY_COLOR.
8. Check the transfer rules.
9. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_MAT,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_Material_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_Material_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_ATTR.
ii. Select ZIVY_MAT_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_TEXT.
ii. Select ZIVY_MAT_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SPER and
i. Description ZIVY Sales Person Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SPER: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_SPER, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_SREG
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SREG and
i. Description ZIVY Sales Region.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SREG: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
2. Creation of Attributes from the ZIVY_SPER InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
6. You find the screen Change Characteristic ZIVY_SPER:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_SPER
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Sales Person Info Object.
2. Select the ZIVY Sales Person Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_SREP
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_SPER,
3. Second field is ZIVY_SREG.
4. Check the mapping. If you dont see the mapping.
5. Click on the empty row in the group Assign InfoObjectField, the box to the right.
6. Check the transfer rules.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_SREP MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_SPER,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_SREP_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_SREP_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_ATTR.
ii. Select ZIVY_SPER_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_TEXT.
ii. Select ZIVY_SPER_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii.
Browse the data.
1. Creation of InfoObject Catalog with Key Figures:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_KEYCAT
i. Description = ZIVY Key Figures Catalog
ii. InfoObjectType: Check the Key Figures.
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_KEYCAT,which is ZIVY Key Figures Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_AMT and
i. Description ZIVY Amount Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Create Key Figure ZIVY_AMT: Detail.
2. In this screen the following fields have to be modified:
i. In the Type/ Unit Tab
1. DataType: Amount
2. Unit/ Currency = 0Currency
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_AMT, by clicking the icon ACTIVATE.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. -
How to get data from MS Access?
How can select data from MS Access datafile, stored on some computer in local network? How to connect Oracle database to MS Access datafile? I tried use ODBC, but unsuccefull. Any idea? Some link to some guide?
mihaelradovan wrote:
How can select data from MS Access datafile, stored on some computer in local network? How to connect Oracle database to MS Access datafile? I tried use ODBC, but unsuccefull. Any idea? Some link to some guide?How were you "unsuccessful"?
You set up an ODBC connection to the MS Access file, then use Oracle Heterogeneous services and configure those to point to the ODBC connection and use that.
Here's an example I already have for an MS Excel file...
1- Go to Control Panel>Administrative Tools>Data Sources (ODBC)>System DSN and create a data source with appropriate driver. Name it EXCL.
2- In %ORACLE_HOME%\Network\Admin\Tnsnames.ora fie add entry:
EXCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.0.24)(PORT = 1521))
(CONNECT_DATA =
(SID = EXCL)
(HS = OK)
Here SID is the name of data source that you have just created.
3- In %ORACLE_HOME%\Network\Admin\Listener.ora file add:
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = <hs_sid>)
(ORACLE_HOME = <oracle home>)
under SID_LIST_LISTENER like:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\ORA9DB)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORA9DB)
(ORACLE_HOME = d:\ORA9DB)
(SID_NAME = ORA9DB)
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = EXCL)
(ORACLE_HOME = D:\ora9db)
Dont forget to reload the listener
c:\> lsnrctl reload
4- In %ORACLE_HOME%\hs\admin create init<HS_SID>.ora. For our sid EXCL we create file initexcl.ora.
In this file set following two parameters:
HS_FDS_CONNECT_INFO = excl
HS_FDS_TRACE_LEVEL = 0
5- Now connect to Oracle database and create database link with following command:
SQL> CREATE DATABASE LINK excl
2 USING 'excl'
3 /
Database link created.
Now you can perform query against this database like you would for any remote database.
SQL> SELECT table_name FROM all_tables@excl;
TABLE_NAME
DEPT
EMPOr refer to this Article...
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4406709207206
Maybe you are looking for
-
When manually activating ODS Data from the target the process is failing. This is confirmed in (SM37) and in ST22. When we run the "Check how up to date the generated programs of an ODS are from (RSRV) the results (without the option of a correct bu
-
Hi there, a few days before everything worked fine, but since then there's no more possibility to get an access to my iMac from the Wi-Fi Network. The applications in use are EyeTV and AppleTV. It is not possible to get access from the iPhone to EyeT
-
Opening DVDSP4 project in DVDSP3
Hi all, Not sure if this has been addressed before. A quick search proved fruitless. I opened a DVDSP4 project in DVDSP3. I received an error stating that some assets would not import correctly. I chose to continue. The immediately obvious problem wa
-
Order Entry Without Pick Release And Ship Confirm
I would like to create a sales order in Order Entry (Release 11), but due to some integration requirement, I do not want to go through the Pick Release And Ship Confirmation process but then I would like to go through the AR interface and Autoinvoice
-
Hi, I am having a Client proxy to File Scenario. Here I am getting data from Z table and sending it to 3rd part system in FILE format. The proxy code is scheduled to run 5 times a day in BACKGROUND mode, I see that some of the jobs gets failed necaus