How to re-run the operation that is in complete status?
This sounds funny, but here is my scenario:
I got 10 operations in a process. In the 6th step, it fetches the username to be assigned in the 7th step from the custom DB using JDBC service.
Unfortunately, the username was not maintained properly (with some mistyping in the DB). In the 7th step, I use Assign User service which takes the username got from 6th step. As it cannot find the username (as it was a mis-spelt name), the operation stalls.
If I see the status of the process,
I see
step1 - COMPLETE
step 5 - COMPLETE
step 6 - COMPLETE (fetching record from DB)
step 7 - STALLED (with error - user name doesnot exist)
i realized the error and corrected the Custom DB with right username.
Now my question is, How can I re-execute the whole process from step 6?
I checked it, but adminui doesnot allow to re-run the operations with COMPLETE status. if I rerun the step 7, there's no use as it is still holding the wrong user name.
Only option i see is asking the users to trigger it again from step 1 which doesnt make any sense for user as they think it's a re-work for them again and also there are multiple users in between the process who approves the form and they all have to rework on this.
highly appreciate your help on this.
Thanks,
kc
Hi Nith,
I tried exactly the same way and it worked perfectly in my test system. However in my prod system,
After I added the exception and routed to the stall process, I saw that process got halted this (below screen shot) way. After the invalid principal exception thrown, it should goto the next step which is Stall process that generates the stalled branch error.
As it got stopped here, now its not even allowing me to retry the operation. The process status is still in running state. I'm suing 8.2 ES.
I'm not understanding why the same steps worked in Test system, and not in Prod system.
very much appreciated if you can help me on this:
In PROD:
Retry Terminate
Operation Name
Status
Branch Name
Start Date
Completed Date
Employee Owner Review
EXCEPTION THROWN
main-branch
February 7, 2012 11:15:04 AM EST
Assignments [3]
COMPLETE
main-branch
December 19, 2011 12:14:33 PM EST
December 19, 2011 12:14:33 PM EST
Search E Owner
COMPLETE
main-branch
December 19, 2011 12:14:22 PM EST
December 19, 2011 12:14:32 PM EST
Apply Rights
COMPLETE
main-branch
December 19, 2011 12:14:22 PM EST
December 19, 2011 12:14:22 PM EST
In TEST: (this throws the branch error - execute13 is the stall process)
Retry Terminate
Operation Name
Status
Branch Name
Start Date
Completed Date
execute13
COMPLETE
main-branch
February 8, 2012 12:16:25 PM EST
February 8, 2012 12:16:25 PM EST
Employee Owner Review
EXCEPTION THROWN
main-branch
February 8, 2012 12:16:24 PM EST
Search E Owner
COMPLETE
main-branch
February 8, 2012 12:15:34 PM EST
February 8, 2012 12:15:40 PM EST
Thanks,
kc
Similar Messages
-
Please, how do I resolve "The operation couldn't be completed. (NSURLErrorDomain error -1.)"
An up to date Air, w/ OSX 10.7.5, returns this error in "Iphoto" when attempting to share an image to facebook. Any suggestions? Thank you.
I unselected this as a question here and posted it to the IPhoto discussion instead.Hello,
I have this same error message NSURLErrorDomain error-1 I cannot upload photo from iPhoto to Facebook. How did you resolve this issue? Many thanks -
Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?
If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?
Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
The operation couldn’t be completed. (OSStatus error -54.)
My Apple course instructor felt it would be smart to create all in iphoto dragging in all videos and photos to one spot.
I now get these errors and they wont play.
What is the error telling me and how do I fix it and get the video to play please??
Is it true iphoto will be replaced in this New Year and if so does anyoNo it didn't at all.
I went to the finder and saw several of the same .
When I called Apple they told me not to delete anything using the Finder… odd I thought, as that was the only way I could see the multiple videos and photos.
Do you think there is any harm in deleting from there directly if I have a good playable copy?
Thank you both for responses.
The clips/videos some are from iPhone 4.
I opened it manually and found 4 copies of most of the same videos, same names, some with slight variations. Don't know why.
Some are titled from iphoto /Masters don't know why that happened
Now I also have some clips with white dotted line on grey where the clip used to be? why would that occur??
In my finder there are now 97000 images. Yet I only have 22,000 in iphoto. Where are the rest located and why so many duplicates?
Have I checked a box somewhere and need to address that?
Thank you for any insight and guidance. -
Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?
See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Once you get familiar with the Mac, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information. -
When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software. -
What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
How can I deploy the Operation find all
Hello together,
I have a big problem.
How can I deploy the operation find all so that I can see it in the WSNavigator.
There I can just see the CRUD operations and if I try to select the operation in the Developer Studio ,when I expose the webservice, the operation is highlighted grey. But if I test the Service I can see the operation and it works.
?????? But why can I test the service with the operation find all and why is it not possible to see the operation in the WSNavigator.
Thank youHi Srinivasan;
thanks a lot. I could solve the problem with my <Cars>. I just deleted it. Now I have just a warning - message.
The code looks know like:
@com.sap.caf.dt.CAFOperation(name="GetAllCars")
public gennari.mhp.types.Ret_Cars GetAllCars() {
Ret_Cars ret_cars = new Ret_Cars();
try {
Collection docList = this.getcarsService().findAll();
ret_cars.setTest((List) docList);
} catch (CAFFindException fe) {
return ret_cars;
But if I try to run the operation as a webservice in the webservice navigator I have following error message:
"com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException "
Is this a problem with my Java AS or is still something in my Application Service responible fort that???
Thats the XML Content:
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode>SOAP-ENV:Server</faultcode>
<faultstring>com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException</faultstring>
<detail>
<yq1:com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException xmlns:yq1="http://sap-j2ee-engine/client-runtime-error">
<!-- com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException -->
</yq1:com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Thank you
Regards Marco -
How can I run the report for different input values at the same time?
Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh -
How SAP standard run the interest calculation in AR module
Dear expert,
would like to seek for your advise, how SAP standard run the interest calculation in AR module ?
Also advise,does the interest calculation generate the interest base on the dunning run?What are relationship between interest calculation generate ?
What are the T-code for running the interest so that able to generate the interest posting according to baseline due date?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
Between, do you have any ideal the Interest Indicator ZB stand and reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
Please help.
Regards,
KarenHi,
Thank you for the promtp reply.
I still have query would like to seek for your advise.
1.Does the interest calculation generate the interest base on the dunning run?For example, the interest is only can be post/generated when there is dunning run and vise versa.
2.What are relationship between interest calculation generate ?Does interest generation depand on the dunning run?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
3.Between, do you have any ideal the reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
4.For posting use F.2B and that will calculate interest on open items of customers. Does this posting is post as noted item or posting document? Beside, do we every day need to run this posting F.2B in order to update the AR interest calculation report and post the interest for the overdue invoice?
5.Do you have any reference link/document /SAP notes on calculate interest on arres F.2B?
a)How the program calculate those overdue invoice for example: does sap calculate the interest base on interest + due amount until the customer made the payment?
b) If customer made payment on the due amount and not the interest and vise versa? How theF.2B program logic work on the calculation ?
Please help.
Regards,
KH -
I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that. -
i get error:The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.) when trying to open a .pkg file downloaded from microsoft store. they said it needs to be .dmg file but how?
Student_245,
are you certain that you’ve completely downloaded the .pkg file — that the download didn’t end prematurely? -
I am using a portable USB storage drive connected to my laptop. I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it? Thank you.
All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
Open the Terminal application in the Utilities folder. At the prompt enter:
sudo rm -rf
Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed. -
I cannot get Bridge to open - I get the message that "the operation could not be completed"
I cannot get Bridge to open in my new CS5 Suite - I get the message that "the operation could not be completed." Photoshop comes up fine, but no Bridge. I have a MacBook Pro. Thanks.
I am having the same issue.
MacBook Pro, OSX 10.6.4
Photoshop CS5, Bridge CS5
It will not open, I have reinstalled, cleared the cache, & reset preferences, + installed the patch.
I do have Bridge CS3 that came with my PS Elements, & that works. Do not have any Norton, or other software running.
Maybe you are looking for
-
PY-India: What are the implications of changing the financial year?
Hi All, I am working on Payroll India. the client i am working for has a financial yr from March to Feb. What would be the implications in terms of changes required if I change the usually followed Apr - Mar financial year in SAP to Mar - Feb in Payr
-
Generating "XSD" from an "XML" file
Hi, I want a java program through which we can generate an "XSD" for the given "XML" file. I don't want any ready to use tools or ide's. Please send me links or code if exists. Thank You.
-
I have pavilion dv6 sound not working hp provide new update idt stil not working
HI . i have pavilion dv6 sound not working hp provide new update idt stil not working
-
Patches recquired to enhance oracle9iAS 9.0.2.0.1 to 9.0.4
Dear friend, i have oracle9iAS 9.0.2.0.1 installed on windows 2000, can you give me a list patches and the order of patches to be applied on 0racle 9iAS 9.0.2.0.1 thank you VIJAY
-
What is the major advantage of Repair full request?
Hi gurus What is the major advantage of Repair full request? Thanks in advance Raj