How to re-size the window vertically so it takes up the other half of the screen?
This is the third time I have asked this question? First time on this site. I am learning how to write HTML through a college assignment. I do not know how to resize the window so it takes up 1/2 of the screen (vertically)
Javascript and then mess with these values to achieve the results you want.
javascript:self.moveTo(100,100);self.resizeTo(1600,1000);
javascript:self.moveTo(0,0);self.resizeTo(screen.availWidth,screen.availHeight);
Likely the bottom one will work, just change "screen.availWidth" to half your screen pixel width.
javascript:self.moveTo(0,0);self.resizeTo(960,screen.availHeight);
Then paste into your Safari address bar, then click and drag the small left icon to your toolbar and when it asks to rename, rename it accordingly.
Now all you have to do is click the button it makes and your screen adjusts.
Similar Messages
-
How do I adjust the screen to show the full page and the whole page?
One way to accomplish this is to use the zoom feature.
Use the Text Size buttons in the Toolbar.
If you click smaller A button, the contents of the window will zoom out and more of the contents
will be visible. But fonts will become smaller.
To revert back, click the larger A button.
Best. -
How to re-size itunes window in 11.2
how to re-size itunes window in 11.2
Javascript and then mess with these values to achieve the results you want.
javascript:self.moveTo(100,100);self.resizeTo(1600,1000);
javascript:self.moveTo(0,0);self.resizeTo(screen.availWidth,screen.availHeight);
Likely the bottom one will work, just change "screen.availWidth" to half your screen pixel width.
javascript:self.moveTo(0,0);self.resizeTo(960,screen.availHeight);
Then paste into your Safari address bar, then click and drag the small left icon to your toolbar and when it asks to rename, rename it accordingly.
Now all you have to do is click the button it makes and your screen adjusts. -
U410 Windows 8 how do you split the screen in two?
I have an IdeaPad U410 with Windows 8 as an Operating system. I would like to know how do you split the screen in two. Also I would like to know if I can put my screen as a touch?
Moderator Note; subject edited for relevancyhi BoJ,
Welcome to the Lenovo Forums.
If you're referring to having an extended display , you will need to have an external monitor and enable extended mode by pressing the Winkey+P and select Extend.
If you want to split the screen to work with 2 documents or 2 windows at a time, you can snap the windows by pressing Winkey+ Left or Right arrow - check this article in reference.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
How can we make 1 window to be displayed on top of other window in smartfor
Dear friends,
How can we make 1 window to be displayed on top of other window in smartforms as i m not getting content of a window which is placed above other window?Hi,
There r two ways ways to display image.
1)As background image
2)using graphic node.
To display image as background.
click on page node.
choose background picture options
enter the path of the image.enter the resolution and output mode in the output attributes.
enter the horizontal and vertical positions where the image to be displayed in the page.
To display image using Graphic node.
Add a graphic node into the window where u want the image to be displayed.
In the General attribute enter the path and the resolution.
Hope ur problem get solved.
Regards,
shiva -
How do i get the screen for pages and numbers to become bigger on my screen
How do I get the Screen for pages, numbers and quickbooks to become bigger on my screen.
The Font is fine for pringingMac's don't have UI scale options like Windows has.
Either you can drop the screen resolution in Displays a wee bit and make things appear distorted, or do what I do and use the Universal Access and set a control key, then use a mouse wheel/scroll to zoom in and out where the mouse is pointed.
For easier web surfing I've got a good solution here
Better surfing options for hard of seeing users -
How do I clear the screen in text mode (cls)
How do I clear the screen in text mode (cls)
Thanks,Clearing of console is an OS specific command, so
in case of Windows you should try:
Runtime.getRuntime().exec("cls");Though it wouldn't help, because exec() will be done as a separate
process... :)
Paul -
How to bring up the screen in mozilla firefox facebook
how to bring up the screen in mozilla firefox facebook
== URL of affected sites ==
http://[email protected]
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4hi Gryse, in the scenario you've described it is not possible to bring up the remember password dialog again, also firefox won't even have your credentials in memory anymore (your login status on the site is stored in a cookie that the website has set on your computer).
please contact the account settings on the website and see if they offer to change the password or send a reset link to a mail address used to register or else contact the support of the website. -
How can we debug the screen pop up?
How can we debug the screen pop up?
Hi,
if you know where the popup is raised it is easy of course as you just have to uses F6 to keep the debug mode running.
But there is a way to get the popup into debug mode similar to typing /h into the ok code field of a sandard dynpro. Therefore you have to do the following steps:
1) click the "Create a Shortcut" button in the gui to get a shortcut on your desktop (the button next to new session)
2) in the oped screen for shortcut setting choose:
type -> system command
command -> /h
depending on gui release you have to enter a system ID -> use the one of your system and parameters -> just type abc
3) press finish to create the shortcut
If you have done this you can drag and drop the shortcut from the desktop to a sap session or popup to switch on the debug mode. One shortcut works for all systems you have, the system id in it does not matter.
Oh, while I often have the case that I forget to resize the window before the popup appears so i cannot access the shortcut directly on the desktop, just remeber that you can always open a small file explorer window go to the desktop folder and drag it from there ;o)
Best Regards
Roman -
How do you capture the screen?
How do i capture the screen?
i guess this is it to this question...
thanksyep, dats wat i meant
is there a way to capture only one window? or should
I just cut the unnecessary part myself?On windows:
You can use "alt + print scrn" to only get a screen shot of the window that has focus.
/Kaj -
Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?
When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
How do you lock the screen on iphone 4?
How do you lock the screen on iphone 4 while on a call? I mute calls, activate face time and I have even called someone by accident during a call. I know there has to be a way to fix this. Please HELP!
It locks automatically when you hold it to your head.
If it fails to do this, then remove the case and see if it solves it.
If it does not, then do the basics - restart, reset, restore.
If that does not solve it, then make an appointment at the genius bar. -
How can I get the screen to lock on my iPhone 4, so I don't press buttons while talking?
I just upgraded to the iPhone 4. When I am talking on the phone, the screen doesn't lock, so I am constantly pressing buttons or hanging up on the person I'm talking to. How can I get the screen to lock while I'm talking? It's driving me NUTS.
The otterbox is one of the culprits. Take the phone out of the case and see if it still happens. If so it is not the case. If the problem goes away, then you may need to make the hole slightly larger. My family has three iPhone 4's in otterboxes and none have this problem. Other users on this forum have reported success with the above methods.
-
How do i stop the screen from rotating on my iphone
how do i stop the screen from rotating on my iphone when i move the phone from horizontal to vertical
You can lock your screen from rotating. Double-click the home button, then slide your finger to the right until your get to the iPod section. There you click the icon on the left and that will lock your screen. You can unlock it the same way.
-
How can we read the screen field values from the report selection screen wi
Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razzuse this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ' -
QUESTION from an American in India:
How do I find the screen with my personal iPod (my name's iPod) so I can download from my purchased or free songs/pods from my computer? My iPod has opened to that for 3 years and this week I can't find it: not on purchased page or on Apple store page.See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Maybe you are looking for
-
Adobe Acrobat 9 Standard - invalid serial number after transfer
Hello, Trying to install my Adobe Acrobat 9 Standard on a new computer. I followed the instructions to deactivate the licence on the old computer and documented my serial number (out of the REGISTRY). I also got the message, that the deactivation was
-
Oracle CRM On Demand Outlook Integration - Add-in shows inactive
I have followed the steps given in the Oracle CRM On Demand->MySetup. After installing the OEI, the dll file is registered. In MS outlook->Tools->Trust Center->Add-ins. The Siebel Outlook Integration Add-ins is shown in the "Inactive Application Add-
-
Use standard Function kyes as custom in PF ststus
Hi all, I want to use standard Function kyes(such as F1 & F3) as custom in PF ststus so that I will perform my code by these function keys. Is it possible. Thanks Sanket sethi
-
Having your program output to a separate console window
I'm looking for a way to run my program(its just a console application)in a separate black console window(similar to Visual Studio). I'm looking on this forum. Someone said to go into Project Properties and hit a radio button that says "send output t
-
Pixel dimensions for iPad wallpaper
I want to set a background wallpaper for my iPad that won't be cropped or otherwise distorted to fit the screen. In the past all that was required was to pad an image to the appropriate proportions in photoshop, but when I created an image to be pre