How to read a XML_TYPE in database using a DBAdapter
Hi All,
I have a requiremetn where I need to read an xml_type column in database using the db adapter and send the xml as a parameter to another partner service.
Can I read XML_TYPE data using db adapter ?
Please advise... Thank you.
Hi All, I tried reading the XML value using database adapter but I am getting the following error
Please help me in resolving this error...
Invoke_1
[2010/04/23 12:59:27]
Faulted while invoking operation "GetOSMMRefreshRegionGML" on provider "BUProcessHistory".
- <messages>
- <input>
- <db_request>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="BUProcessHistoryInput_msg">
- <BUProcessHistoryInput xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory">
<JOB_ID>
348655
</JOB_ID>
</BUProcessHistoryInput>
</part>
</db_request>
</input>
- <fault>
- <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="summary">
<summary>
file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/BUProcessHistory.wsdl [ BUProcessHistory_ptt::GetOSMMRefreshRegionGML(BUProcessHistoryInput_msg,BUProcessHistoryOutput) ] - WSIF JCA Execute of operation 'GetOSMMRefreshRegionGML' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.db.DBPureSQLInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.db.DBPureSQLInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
</summary>
</part>
- <part name="detail">
<detail>
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.db.DBPureSQLInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
</detail>
</part>
</bindingFault>
</fault>
</messages>
Copy details to clipboard
[2010/04/23 12:59:27]
"{http://schemas.oracle.com/bpel/extension}bindingFault" has been thrown.
- <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="summary">
<summary>
file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/BUProcessHistory.wsdl [ BUProcessHistory_ptt::GetOSMMRefreshRegionGML(BUProcessHistoryInput_msg,BUProcessHistoryOutput) ] - WSIF JCA Execute of operation 'GetOSMMRefreshRegionGML' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.db.DBPureSQLInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.db.DBPureSQLInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
</summary>
</part>
- <part name="detail">
<detail>
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.db.DBPureSQLInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XMLReadBPEL_v2010_04_23__45730_e20967fe1df51ca229f10779e04c7620.tmp/geometryBasic0d1d.xsd.__OAUX_GENXSD_.TOP.XSD for http://xmlns.oracle.com/pcbpel/adapter/db/BUProcessHistory due to: included targetNamespace "http://www.opengis.net/gml" must the same as "{1}"
Please make sure all used XML schemas are imported/included correctly.
</detail>
</part>
</bindingFault>
Similar Messages
-
How to display multiple tables from database using netbeans swing gui
plz reply asap on how to display multiple tables from database using netbeans swing gui into the same project
Layered Pane with JTables or you can easily to it with a little scripting and HTML.
plzzzzzzzzzzzzzzzzz, do not use SMS speak when posting. -
How can I connect to the database using ODBC within excel.
Hi,
How can I connect to the database using ODBC within excel and just refresh the data when needed.
Thanks,
Priyanka
Edited by: user554934 on Jun 9, 2009 2:53 AMThis is NOT an APEX relevant question, try posting it in the SQL/PL/SQL Forum..
Thank you,
Tony Miller
Webster, TX -
Help!!! Can Anybody tell me how to read bookmarks of MS word using ABAP?
It took me around 3 days , but there is still no solutions...
Can Anybody tell me how to read bookmarks of MS word using ABAP ?
Many thanks.Dear Nick ,
Thanks for your attention!
I have MS word installed in the R3 server , and I uploaded my word doc with some self-defined bookmarks into SAP R3 system.
Now I want to read these bookmarks using ABAP in this R3 system...
Is it clear enough?
Looking forward to your solution ...
Thanks again..
Best Regards,
Leon. -
How to start or shut down database using sql developer in windows
Dear Sir/Madam,
how we start or shut down database using sql developer in windows
we are using oracle 11g release2, unix, java & oracle oracle weblogic administration
Thanks & Regards
Manish Kumar
Datbase Team
TCS Ltd.HI, Welcome to OTN form,
SHUTDOWN is not a SQL statement but a SQL*Plus command . You cannot use SHUTDOWN in PL/SQL.
Check following link:
http://docs.oracle.com/cd/E11882_01/server.112/e16604/ch_twelve042.htm#i2699551
More Information please check OTN discussion: https://forums.oracle.com/thread/2349159
Thank you -
How to read accdb and mdb files using JDBC or File Adapter
Hi,
How to read and extract the .accdb and .mdb files from FTP server and parsing into xml by using FTP or JDBC Adapter in SAP PI7.11 With linx Os.
Regards
UpendraHi,
As per SAP note:1681420 i have to install the below driver from Microsoft
Our SAP PI installed under Unxi OS ,how to install the driver (.exe file) .
Driver name :AccessDatabaseEngine_x64.exe
Url:Download Microsoft Access Database Engine 2010 Redistributable from Official Microsoft Download Center
1681420 - PI : Where to locate the JDBC Driver for Microsoft Access
Regards
Upendra -
How to backup more than one database using powershell
I am Trying to backup more than one database using the following script but no luck. I want user to type on command line the database they want to backup, e.g all databases that have "test" at the front like test.inventory, test.sales so i want
user to type test.* and it backs up all databases related to test. Here is the script
#$date = Get-Date -Format yyyyMMddHHmmss
#$dbname = 'test.inventory'
$dbToBackup = "test.inventory"
cls
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoExtended") |
Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.ConnectionInfo")
| Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoEnum") | Out-
Null
Add-Type -AssemblyName "Microsoft.SqlServer.Smo, Version=10.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91"
$server = New-Object Microsoft.SqlServer.Management.Smo.Server($env:ComputerName)
$server.Properties["BackupDirectory"].Value = "C:\_DBbackups"
$server.Alter()
$backupDirectory = $server.Settings.BackupDirectory
#display default backup directory
"Default Backup Directory: " + $backupDirectory
$db = $server.Databases[$dbToBackup]
$dbName = $db.Name
$timestamp = Get-Date -format yyyyMMddHHmmss
$smoBackup = New-Object ("Microsoft.SqlServer.Management.Smo.Backup")
#BackupActionType specifies the type of backup.
#Options are Database, Files, Log
#This belongs in Microsoft.SqlServer.SmoExtended assembly
$smoBackup.Action = "Database"
$smoBackup.BackupSetDescription = "Full Backup of " + $dbName
$smoBackup.BackupSetName = $dbName + " Backup"
$smoBackup.Database = $dbName
$smoBackup.MediaDescription = "Disk"
$smoBackup.Devices.AddDevice($backupDirectory + "\" + $dbName + "_" + $timestamp +
".bak", "File")
$smoBackup.SqlBackup($server)
#let's confirm, let's list list all backup files
$directory = Get-ChildItem $backupDirectory
$backupFilesList = $directory | where {$_.extension -eq ".bak"}
$backupFilesList | Format-Table Name, LastWriteTimeOr i am using this script which backs up everything except tempdb but dont know how to modify this so that it backs up up all test related databases
Is there a way that i use test.*
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | out-null
$s = new-object ("Microsoft.SqlServer.Management.Smo.Server") $instance
$bkdir = "C:\_DBbackups" #We define the folder path as a variable
$dbs = $s.Databases
foreach ($db in $dbs)
if($db.Name -ne "tempdb") #We don't want to backup the tempdb database
$dbname = $db.Name
$dt = get-date -format yyyyMMddHHmm #We use this to create a file name based on the timestamp
$dbBackup = new-object ("Microsoft.SqlServer.Management.Smo.Backup")
$dbBackup.Action = "Database"
$dbBackup.Database = $dbname
$dbBackup.Devices.AddDevice($bkdir + "\" + $dbname + "_db_" + $dt + ".bak", "File")
$dbBackup.SqlBackup($s) -
Read XML file into databased using stored procedure
I need to read an xml file into my database using a stored procedure. I looked at a couple of tutorials, but I am kind of lost and am looking for some guidance. I will eventually need to only pull a handfull of the data in based on the USER ID. Any help will be greatly appreciated. I have been given a schema file and an example file of how the data will me sent to me. The schema file is below:
<h1>Schema File</h1>
<?xml version="1.0" encoding="utf-8"?>
<!--Generated by Turbo XML 2.4.1.100. Conforms to w3c http://www.w3.org/2001/XMLSchema-->
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
<xsd:element name="root">
<xsd:complexType />
</xsd:element>
<xsd:element name="Report">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="Biller" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Biller">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="BillerName" />
<xsd:element ref="BillerIdNumber" />
<xsd:element ref="PartnerInfo" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="BillerName">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="BillerIdNumber">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="PartnerInfo">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="PartnerName" />
<xsd:element ref="PartnerVenderNumber" />
<xsd:element ref="PartnerStreet01" />
<xsd:element ref="PartnerStreet02" />
<xsd:element ref="PartnerCity" />
<xsd:element ref="PartnerState" />
<xsd:element ref="PartnerZip" />
<xsd:element ref="PartnerCountry" />
<xsd:element ref="PartnerActive" />
<xsd:element ref="PartnerContactName" />
<xsd:element ref="PartnerEmailAddress" />
<xsd:element ref="PartnerContactPhone" />
<xsd:element ref="PartnerFaxNumber" />
<xsd:element ref="PartnerUpdateUser" />
<xsd:element ref="PartnerUpdateDate" />
<xsd:element ref="PartnerDocColor" />
<xsd:element ref="PartnerDocDistribution" />
<xsd:element ref="PartnerDocPrinting" />
<xsd:element ref="PartnerDocTiming" />
<xsd:element ref="Delivery" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="PartnerName">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="PartnerVenderNumber">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="PartnerStreet01">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerStreet02">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerCity">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerState">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerZip">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerCountry">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerActive">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerContactName">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerEmailAddress">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerContactPhone">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerFaxNumber">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerUpdateUser">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerUpdateDate">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerDocColor">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerDocDistribution">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerDocPrinting">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerDocTiming">
<xsd:complexType />
</xsd:element>
<xsd:element name="Delivery">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="DeliveryType" />
<xsd:element ref="DeliveryContactName" />
<xsd:choice>
<xsd:element ref="ReceivingStreet01" />
<xsd:element ref="ReceivingStreet02" />
<xsd:element ref="ReceivingCity" />
<xsd:element ref="ReceivingState" />
<xsd:element ref="ReceivingZip" />
<xsd:element ref="ReceivingCountry" />
<xsd:element ref="DeliveryEmailAddress" />
<xsd:element ref="DeliveryCompanyId" />
<xsd:element ref="DeliveryUserId" />
<xsd:element ref="DeliveryFormatType" />
<xsd:element ref="SecureType" />
<xsd:element ref="SecureQuestion" />
<xsd:element ref="SecureAnswer" />
<xsd:element ref="DeliveryFaxNumber" />
</xsd:choice>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryType">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryContactName">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryEmailAddress">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="SecureType">
<xsd:complexType />
</xsd:element>
<xsd:element name="SecureQuestion">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="SecureAnswer">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryFormatType">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryCompanyId">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryUserId">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryFaxNumber">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingStreet01">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingStreet02">
<xsd:complexType />
</xsd:element>
<xsd:element name="ReceivingCity">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingState">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingZip">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingCountry">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
</xsd:schema>
<h1>Example File</h1>
<?xml version="1.0" encoding="utf-8"?>
<Report>
<Biller>
<BillerName>DONATO TEST BILLER</BillerName>
<BillerIdNumber>999999999</BillerIdNumber>
<PartnerInfo>
<PartnerName>TEST TRADING PARTNER</PartnerName>
<PartnerVenderNumber>999999999</PartnerVenderNumber>
<PartnerStreet01 />
<PartnerStreet02 />
<PartnerCity />
<PartnerState />
<PartnerZip />
<PartnerCountry />
<PartnerActive />
<PartnerContactName />
<PartnerEmailAddress />
<PartnerContactPhone />
<PartnerFaxNumber />
<PartnerUpdateUser />
<PartnerUpdateDate />
<PartnerDocColor />
<PartnerDocDistribution />
<PartnerDocPrinting />
<PartnerDocTiming />
<Delivery>
<DeliveryType>EMAIL</DeliveryType>
<DeliveryContactName>Kiran</DeliveryContactName>
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
</Delivery>
<Delivery>
<DeliveryType>SECURE</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<SecureType />
<SecureQuestion>Pet Name</SecureQuestion>
<SecureAnswer>040698de9bf14ef87d8cbaf46b8ecddc</SecureAnswer>
<DeliveryFormatType />
</Delivery>
<Delivery>
<DeliveryType>CEO</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<DeliveryCompanyId>WFADM618</DeliveryCompanyId>
<DeliveryUserId>PAULSEN</DeliveryUserId>
<DeliveryFormatType />
</Delivery>
<Delivery>
<DeliveryType>FAX</DeliveryType>
<DeliveryContactName>Kiran</DeliveryContactName>
<DeliveryFaxNumber>4807244340</DeliveryFaxNumber>
<DeliveryFormatType>PDF</DeliveryFormatType>
</Delivery>
<Delivery>
<DeliveryType>DOC</DeliveryType>
<DeliveryContactName />
<ReceivingStreet01>2600 South Price Road</ReceivingStreet01>
<ReceivingStreet02 />
<ReceivingCity>Chandler</ReceivingCity>
<ReceivingState>AZ</ReceivingState>
<ReceivingZip>85248</ReceivingZip>
<ReceivingCountry>United States</ReceivingCountry>
</Delivery>
<Delivery>
<DeliveryType>DR</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<DeliveryCompanyId>WFADM618</DeliveryCompanyId>
<DeliveryUserId>PAULSEN</DeliveryUserId>
<DeliveryFormatType />
</Delivery>
</PartnerInfo>
</Biller>
</Report>Try with a XMLTABLE function
For example to Extract BillerName and BillerID
with t as(select xmltype( '<?xml version="1.0" encoding="utf-8"?>
<Report>
<Biller>
<BillerName>DONATO TEST BILLER</BillerName>
<BillerIdNumber>999999999</BillerIdNumber>
<PartnerInfo>
<PartnerName>TEST TRADING PARTNER</PartnerName>
<PartnerVenderNumber>999999999</PartnerVenderNumber>
<PartnerStreet01 />
<PartnerStreet02 />
<PartnerCity />
<PartnerState />
<PartnerZip />
<PartnerCountry />
<PartnerActive />
<PartnerContactName />
<PartnerEmailAddress />
<PartnerContactPhone />
<PartnerFaxNumber />
<PartnerUpdateUser />
<PartnerUpdateDate />
<PartnerDocColor />
<PartnerDocDistribution />
<PartnerDocPrinting />
<PartnerDocTiming />
<Delivery>
<DeliveryType>EMAIL</DeliveryType>
<DeliveryContactName>Kiran</DeliveryContactName>
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
</Delivery>
<Delivery>
<DeliveryType>SECURE</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<SecureType />
<SecureQuestion>Pet Name</SecureQuestion>
<SecureAnswer>040698de9bf14ef87d8cbaf46b8ecddc</SecureAnswer>
<DeliveryFormatType />
</Delivery>
<Delivery>
<DeliveryType>CEO</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<DeliveryCompanyId>WFADM618</DeliveryCompanyId>
<DeliveryUserId>PAULSEN</DeliveryUserId>
<DeliveryFormatType />
</Delivery>
<Delivery>
<DeliveryType>FAX</DeliveryType>
<DeliveryContactName>Kiran</DeliveryContactName>
<DeliveryFaxNumber>4807244340</DeliveryFaxNumber>
<DeliveryFormatType>PDF</DeliveryFormatType>
</Delivery>
<Delivery>
<DeliveryType>DOC</DeliveryType>
<DeliveryContactName />
<ReceivingStreet01>2600 South Price Road</ReceivingStreet01>
<ReceivingStreet02 />
<ReceivingCity>Chandler</ReceivingCity>
<ReceivingState>AZ</ReceivingState>
<ReceivingZip>85248</ReceivingZip>
<ReceivingCountry>United States</ReceivingCountry>
</Delivery>
<Delivery>
<DeliveryType>DR</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<DeliveryCompanyId>WFADM618</DeliveryCompanyId>
<DeliveryUserId>PAULSEN</DeliveryUserId>
<DeliveryFormatType />
</Delivery>
</PartnerInfo>
</Biller>
</Report>')xml from dual)
select q.* from t,xmltable('/Report' passing t.xml columns
BillerName varchar2(20) PATH
'/Report//Biller/BillerName')q
BILLERNAME BILLERID
DONATO TEST BILLER 999999999 -
How to store any file in database using Forms? EVEN non OLE Compliant
I have to store and retrieve any file (not only image and OLE compatilble file) in the database and retrieve it later without using Forms and email it using java stored procedure. How do I do that?
I used OLE, but the problem with this is later when I retrieve it, some OLE specific control information is also retrieved, which means the data stored is not only pure data.
In the forms, I just want to give the file name and it should store that file into the database as we do with READ_IMAGE_FILE. Is there any way of achieving this?
Thank you.
Bijay
nullPlease refer to this link:
http://www.dba-oracle.com/t_storing_insert_photo_pictures_tables.htm
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
How to read from a HPIB instrument using GPIB software?
How Can I read from a HPIB instrument using GPIB software and library functions in Visual Basic Environment? In HPIB we do not have to send query first but in GPIB we do? Although writing and sending a command is to a HPIB instrument is pretty much the same as a GPIB instrument. Any help or suggestion?
Thanks in Advance
ShazaduhHI,
HPIB and GPIB are the same thing at a low level in terms of instrument communication. They are both compliant with the IEEE 488.2 standard.
The difference is the driver you have to use. Each manuafacturer has to develop a driver to control the interface ont he host. For National Instruments interfaces you use NI-488.2 (which you refer to GPIB functions). For HP interfaces you need to use the SICL library. For information using this library in Visual Basic you'll have to look at the SICL documentation.
You can also use VISA (HP-VISA) which would allow you use NI interfaces or other buses in the future.
Hope this helps.
DiegoF
National Instruments. -
How to connect Oracle 7.x database using weblogic 11g
Hi,
For one of my requirement, I need to connect to a Oracle 7.x database using weblogic 11g Application server.
Any idea?Tried as per the suggestion from the link :
http://jvzoggel.wordpress.com/2011/07/26/weblogic-ojdbc-driver/
It worked. -
How do you query Oracle RDF database using Java program?
Does anyone know how to get data out of the oracle RDF database using Java?
I'm running the following java code and it returns basically null values. My guess is that the get_triple() function returns a dataset other than resultset. I've tried searching the Oracle web site. Am I supposed to be using CLOB object? Any help would be appreciated. Thanks
sql = "SELECT a.triple.GET_TRIPLE() AS triple FROM family_rdf_data a";
ResultSet rs = stmt.executeQuery( sql ) ;
while ( rs.next() )
System.out.println( rs.getString(1) ) ;
rs.close() ;get_triple() returns an object, and the code would be different from the code of retrieving a string. Some sample code for retrieving objects is at http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/files/advanced/advanced.html
get_subject(), get_property() return strings so the code below should work. get_object() returns a CLOB so different handling would be required and there is some sample code at the link above.
Melli -
How to read Component profile.properties without using CAF?
Do you know how to read DC WebDynpro Component profile.properties without using CAF.
A Component.profile.properties is located under
Scr/components/fullcomponentname/
Thanks, Best regards
Peterimport com.sap.tc.webdynpro.services.sal.config.api.IWDConfiguration
import com.sap.tc.webdynpro.services.sal.config.api.WDConfiguration;
import com.sap.tc.webdynpro.services.sal.deployment.api.WDDeployableObject;
import com.sap.tc.webdynpro.services.sal.deployment.api.WDDeployableObjectPart;
import com.sap.tc.webdynpro.services.sal.deployment.api.WDDeployableObjectPartType;
WDDeployableObjectPart myComponent = WDDeployableObject.getDeployableObjectPart
"mycompany.com/myapp~mydc" // name of DC
"com.mycompany.myapp.mydc.MyComponent" // full component name
WDDeployableObjectPartype.COMPONENT
IWDConfiguration config = WDConfiguration.getConfigurationByName
myComponent
"profile.properties" // not sure, try "profile" as well
Exception handling ommited.
Hope this helps. Just wondering what's for?
Valery Silaev
P.S. full disclosure: CAF developer, author of PropertyConfigurable components concept -
How to read security certificates from registry using java 1.4
Hi All,
I installed one Security certificate in IE browser. that certificate is UNExportable which contains private keys which are imported to use while server cuommunication.
Now have to send that certificate for authentication to vendor server using java(J2SDK 1.4).I tried allways to do cummunication but filed due to unabalability of private key.
Here I want to read that certificate from windows sertificate registry store which is installed from IE.
Is there any way to read IE installed certificates using java. If so please provide me that code.
Its very URGENT for me.....please help
thank you
Vinodwhile exporting the certificate the am able to export only public keys, private key option is disabled. but those private keys are very important for my communication. I should pass those private keys to vendor for authentication purpose.
That's way am paling to read certificate from windows registry. but am new to these concepts.
can anybody have code to read certificates from windows registry using java 1.4? -
How to read application item's value using javascript
Is there any way to read value of application item using javascript?
ThanksJavascript can access the objects rendered for the page you are calling. This is why the $v function will do the work if calling it for a page item. However an application item isn't rendered on the page - the session state of it is only stored in the table. This is why you need to do it the way I described. You could do a workarround and create a hidden item on your page and compute the value of it using the application item value. Then you would be able to get the value of your application item using $v function.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------
Maybe you are looking for
-
Help optimizing query with function
Hello experts, I need your help optmizing this query which has a condition that matches on results of non-deterministic function. The non-deterministic functino is fedtaxpk.fedtaxpk_pkg.GETFIELDDATAGROUPSEQKEY. Values that it returns depends on conte
-
Can you help me add songs from iTunes 11.0.1 to iPhone4S?
I have a new MacBook Air and am trying to add songs from it (iTunes 11.0.1) to iPhone4S. However, drag & drop does nothing, which is what I had done on my PC to add songs previously. Note: I specifically don't want to sync my songs/libraries. I jus
-
I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro! Anyone have a suggestion??
-
Why does iOS "connect" to a network even if it doesn't know the password?
The network's clearly protected, but it just "connects" and sits there. It puts a checkmark next to the network, but it's truly not connected. Happens across devices on my iPhone as well.
-
Organtisational data determination for transaction type
Hi! We are implementing the organizational data determination. The idea is to fix a specific org unit for several transaction types, because they will always use this unit. In order to achieve this, we have implemented Org data determination with rul