How to reclaim spare space back at the end of my clips on the time line

When I have edited stuff on the time line I find that through moving clips around that I have an empty space after my collection of clips that I have arranged. How do I reclaim that empty space back so that where my clips end so does the time line.
I have tried saving the project and reopening it but this does not seem to do anything as I still have the space left.
Any help would be gratefully received Thanx ahead of time.

Control click on the empty space and, on the drop down menu, click on Convert Empty Space to Clip. Then, delete the clip you just created.
If the empty space is at the end of your movie, you can do the same as above. But, if your playhead still continues moving past the end of the movie, then expand your time line as wide as possible and check down your time line for little bits of clips left over from editing, and delete those. Any audio that extends past your video clips at the end of the movie should be trimmed back as well, even if you have muted them.

Similar Messages

  • HT1277 I installed mavericks today and the mail will not open and just keeps on not responding how do I get it back I have force quit it a number of times now

    I installed mavericks today and the mail will not open and just keeps on not responding how do I get it back I have force quit it a number of times now

    Open the system menu via Alt+Space or click the Firefox icon on the title bar and see if you can resize that window.
    If that works then close Firefox to save that setting.
    See also http://kb.mozillazine.org/Resizing_oversize_window
    Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
    See http://kb.mozillazine.org/Corrupt_localstore.rdf

  • I live in Australia but when I upgraded to IOS6 it changed my App Store region to the US. How can I change it back? I have been trying to find the answer.

    I live in Australia but when I upgraded to IOS6 it changed my App Store region to the US. How can I change it back? I have been trying to find the answer.

    Contact iTunes support & request they clear the balance:
    http://www.apple.com/support/itunes/

  • I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    Welcome to Apple Support Communities
    Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
    If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

  • I had to restore my iPhone and lost a lot of music!!! How can I get it back?! No cloud appears next to the songs, just buy!

    I had to restore my iPhone and lost a lot of music!!! How can I get it back?! No cloud appears next to the songs, just buy!

    You should be storing everything on your computer and you should always backup your computer.  Have you failed to do these things?
    If so, not good, then you can redownload some iTunes purchases in some countries.  Open iTunes store, click Purchased under Quick links

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • How do I get reverb  to carry on at the end of a clip.

    Dear FCP Community
    When applying the reverb filter in FCP, I would like to have the reverberation to continue for a few seconds at the end of the clips normal length. I can't work out how to do it .... is it even possible!
    With thanks, Johnny

    You need to have extra material at the end of your clip called "Handles".
    Then as soon as the picture section has ended, increase the amount of "Wet" effected mix in relation to the "Dry" unaffected mix.
    So lets say your part with picture is 5 seconds long, you need 7 seconds of audio -2 seconds more at the end. From the 5th to 6th second you increase the ratio of wet to dry mix and from the sixth to seventh second, you fade the audio out, letting the next clip take over. Make sense?
    The numbers here are just for illustration. Yours may differ.

  • How do I see the duration of a clip in the timeline ?

    Hi there,
    How do I see the duration of a clip in the timeline ?
    How do I change the duration by typing in a number (instead of dragging its ends) ?
    Thanks

    Tom Wolsky wrote:
    Select the clip. The display at the bottom of the timeline window will tell you the clips duration.
    Control-D will open the duration display in the dashboard.
    Control-D is the same as right click & select "Change Duration" ?
    But where is the dashboard ? Nothing pops out ! (ie no new windows appear)
    Any ideas ?

  • How to insert a 2D array into the end of X axis of the initial array?

    Hi, friends, I have a question and look for an advice. I have several input data, each of which has 4 rows and unknow columns. Each time I receive the input, I need to combine it to all of the previous ones by adding it to the end of X axis of the previous combined data. I must do it because, later, I need to run my model and my model read input for each column of 4 rows. How should I do it? Also, should I initiate an array before reading all of the inputs? The inputs are F32 format. Thank you very much for any of your advice.

    Building a 2D array row-by-row is easy. You either use "build array" if you need to update the indicator during the run, or you simply autoindex at the loop  boundary (FOR or WHILE).
    Two possibilities are shown in the attached image. If your arrays are getting large and you use a while loop, there are possibilities that are more memory efficient. You would initialize a 2D array (e.g. filled with NaNs) of an upper boundary of the final expected size, then replace rows as you go.
    (Notice that if you use autoindexing on a FOR loop, the final size is known from the beginning so memory can be allocated efficiently)
    Message Edited by altenbach on 11-01-2006 09:19 AM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    AppendRows.png ‏5 KB

  • The musictracks on my iPod Nano don't play till the end but suddenly change to the next track. How can I solve this problem ?

    The musictracks on my iPod Nano don't play till the end but suddenly change to the next track. How can I solve this problem ?

    You have the accessibility VoiceOver feature turned on.
    Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • How do I put the audio from one clip over the video of another clip?

    So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

    This thread seems to be on the same subject and is very helpful.
    http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
    The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

  • Is there a command to sync the end of a region to the playhead or the end of another region?

    Is there a command to sync the end of a region to the playhead or the end of another region?

    For youtube the code would be something like this:
    view-source:calkaweb.herobo.com/video.html
    for HTML5 videos for youtube replace &version=3 with &html5=1 in the youtube URL
    I have no idea how to impletent the youtube code into Edge tho other than an iframe but that wouldn't work I've tried :
    http://forums.adobe.com/thread/1285212
    You would need to place all of the youtube codes into edge in order for it to work but I duno how to do that and no1 answered the question in the thread I made about it.
    as for MP4/HTML5 video you can use
    var video = document.getElementsByTagName('video')[0];
        video.onended = function(e) {
          /*Do Something*/

  • Inserting a character at the end of a paragraph IF the next paragraph is a certain style

    Hi,
    I have found a section of a collegues script that will insert a bullet at the end of a paragraph if the PREVIOUS para is styled with a certain style, I have been trying to modify it to work if the FOLLOWING paragraph is a certain style instead but as I am not sure how the "insertionPoints[f[i].index-1].appliedParagraphStyle.name" part of it is working I have hit a brick wall. Can anyone shed any light on this?
    thanks
    myDoc = app.activeDocument
    // This part checks if "News text para indent" is followed by "News title regular" and inserts a bullet
    app.findGrepPreferences = null;
    app.findGrepPreferences.appliedParagraphStyle = "News text para indent";
    app.findGrepPreferences.findWhat = "^.+$";
    f = myDoc.findGrep();
    for (i = 0; i < f.length; i++)
        var inser= f[i].insertionPoints.length
      if (f[i].parentStory.insertionPoints[f[i].index-1].appliedParagraphStyle.name == "News title regular")
    var bullet =  f[i].parentStory.insertionPoints[f[i].index+inser-1].contents="\u25CF"

    OK thanks much,
    So to do that, do i begin by highlighting the last frame (the last frame of the movie itself - actual film image) on the timeline, and go to main menu and select Insert>Timeline>Keyframe?  Then insert stop(); on the last frame via the actionscript panel?
    Then highlight the first frame and insert the setTtimeout() and  play() onto the first frame?
    I inserted the stop() command on the last frame and the clip now stops...
    I tried adding this script on the last frame and clip stops but does not repeat after 5 seconds...
    stop()
    setTimeout(5)
    play();

  • Frozen frame at the end of every clip

    Without transitions, there is a frozen frame at the end of every clip that can be very distracting. Is there a way to disable this? I've been putting transitions in, which works, but I don't want to have to do that.
    Thanks,
    Elsa

    Thank you very much! Sorry it took me a while to get back to you. This ended up working! It ***** that I have to add this extra step, but I'm glad there is a work around. Thanks again for you help.

  • TS1646 hello  I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

    hello 
    I have problem with regist my visa and I cannot buy from store
    the message came in the end of form is says
    the phone number must be a 7-digit number
    and I have writed but not accepted
    iam from saudi arabia
    my mobile is 966504850992
    pls answer
    thanks
    dfr aldossary

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Maybe you are looking for