How to record pop up(f4) values in bdc recording

Hi all,
My requirement is as follows, while doing recording for f-04 transaction. I have field, if i press f4 on the field on that. a popup will be displayed and i have to provide some values in that. Based on the values entered the system will given other value which i have to populate in the field on which i have pressed f4.
Thanks in advance

Hi,
I dont thing you require a popup for F4 while doing BDC.The reason is you do F4 when you are not sure of the value and select the value from the possible values but in BDC you have already the data that is to be passed to the transaction. So here you are required to validate the value rather then going for popup. validation part you can do by putting a select statement to corresponding master data.
Hope this helps.

Similar Messages

  • How to Handle pop up error message in BDC

    Hi Friends,
    Right now I am working with CA12 transaction.
    In this transaction for each group I need to update the details of the operations( lablour and overhead value).
    after updating the details, When I click on save I get a error pop up message saying 'Task contains the Erros, do you still want to save', if I click on the group it will be saved.
    When I am doing the same thing through recoring( SHDB ). I do no get the same pop up Which I got through transaction(CA12).
    but still user wants to save the details. user do want to be displayed as error.
    How to get the pop up?, so that I can click save eventhough it contains errors.
    Is it possible in BDC?
    Regards,
    Xavier.P

    Hi!
    Yes, it's though, however you might try to create the BDC recording with an another way.
    For example, don't click on the save button, but press the leave button (green left arrow). The transaction will give you a popup with the options: save yes, no, cancel. Hopefully this popup can be recorded with SHDB.
    Regards
    Tamá

  • How to get the table of value field? and can we expand the technical limits

    Dear
    I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
    And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
    We have a note for R.4.x Please see below:
    OSS note 160892
    You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
    The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
    To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
    David Sun
    Regards!

    how to extend the limit of value numbers? please see the original question.

  • How to retreive and display return value from BAPI

    Hello,
    I am using SUP to create a sales order application. In my MBO I have a create operation which calls a BAPI to create a sales order. How can I retrieve the return value (saled doc number) and display it on a screen and display it as an Alert of BB application.
    Regards
    Nidhideep Bhandari

    Hi David Brandow,
    I have tried your solution where I just created a MBO for my 'operation' and I'm using sync parameters to execute the RFC.
    The problem I'm facing is, for example, if I create a record it gets saved in the MBO table and the record successfully gets created in SAP as well after a sync. But when I create another record and sync, the previously saved record in MBO table also gets executed so I'm getting duplicate entries in SAP.
    Have you or anyone faced this problem?
    Any response is appreciated. Please let me know if I'm not clear, I realized its a complicated scenario.
    Thanks,
    Sandeep

  • How to remove hash in the value of the field fetched from application serve

    Hi,
       I am populating values of the file which is in the application server to the internal table. But for the last field hash is also populating from the file along with the value.
    Please suggest me how to remove hash in the value of the last field.
    Thanks,
    Neelima.

    Hi Vinay,
    Please check the program. I have used the replace statement but it is not working.
    IF NOT v_sap_bom_rec IS INITIAL.
    Spliting the records at '~' delimiter
        SPLIT v_sap_bom_rec AT c_del INTO  wa_bom_file-model_name
                                           wa_bom_file-product_code
                                           wa_bom_file-description
                                           wa_bom_file-product_type
                                           wa_bom_file-mfg_part_num
                                           wa_bom_file-mfg_part_desc.
        REPLACE cl_abap_char_utilities=>horizontal_tab IN wa_bom_file-mfg_part_desc WITH space .
        wa_bom_file-status = c_status.
        APPEND wa_bom_file  TO i_bom_file.
    But it is not working.
    Please help me..
    Thanks
    Neelima

  • How do u convert a numeric value to char

    hi,
    how do u convert a numeric value NUMBER(22) to a character value.... like a to_char() function?
    i've tried the CAST function it won't work.

    Hi,
    Use of CAST function will convert NUMBER to CHAR but it takes a lot of time if there are large number of recrods.
    Syntax:
    CAST(col_name AS char)
    I have tried this, it worked fine for less records.
    Are you getting any error while using cast function or while querying..
    As far as I know it won't give error in these cases (if correct syntax used) but it will take very much time (depending on the number of records) while querying.
    -Vency

  • How can i transfer a field value in the main report to its sub-report?

    <p><font face="Arial" size="2">How can i transfer a field value in the main report to its sub-report?</font></p><p><font face="Arial" size="2">Please eloberate with example if possible!</font></p><p><font face="Arial" size="2">Thanks...</font></p><p> </p>

    <p>You can do a couple of things - one would be to pass the information using the data linking expert.  Right click on the subreport, choose &#39;Change Subreport Links&#39; and select the field(s) you are wanting to pass to the subreport.  CRW will build parameters and a record selection formula for you in the subreport, and if that&#39;s what you want, then great.  But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.</p><p>Alternatively, you can look to passing Shared variables back and forth from the main and subreport.  this link talks about the method to do this: http://diamond.businessobjects.com/node/251</p><p> </p>

  • How to read Group ID from Value Mapping Context in Cache Monitoring ?

    Hi friends,
        In RWB --> Cache Monitoring --> Integration Server (Java) -> (Search for Value Mapping Groups) in this each item is identified by Value Mapping Group (GroupID, Context, Identifier/Agency, Identifier/Scheme). Either we create Value Mapping Table in ID or replicate value mapping data directly from text file/SAP table etc., in run time cache, data will be identified in this manner.
        Now, our requirement is to delete a record the Cache for a particular context. Two operations provided by XI one is 'Delete' and another one is 'DeleteGroup'. When we use either of this, we should know GroupID. Suppose, I replicated some large amount of data from my text file in Runtime Cache. Value Mapping Table is like that IN --> India, US --> USA, AU --> Australia, EG --> Egypt. Now, I am required to write a program to get the input country code from user which is going to delete in the value mapping table like IN/AU....  For this, what logic we should follow in the program is, First we scan the value mapping table and find the record (country code)  which is match with the input. Then find the GUID value for this record. Now we use the DeleteGroup Operation and pass this GUID and then delete the record.
        So, in essence, how to read the GUID from value mapping context.
        Friends, Kindly help me to do this.
    Thanks in advance.
    Jegatheeswaran P.

    Did you get the way to read group id?

  • Displaying item value on basis of pop up lov value

    Hi ,
    I have created a form on which i have a pop up lov item whose values are getting displayed on basis of a table column.Now my requirement is that when a user select a value(for ex: say an code i.e 123) from pop up lov then on basis of this value an another value pops up which shows the description related to this code.I have this description in another column of same table from which i have displayed pop up lov values.
    I tried to implement this by creating a display only item on form and taking source value of this item from sql query returning single value as code is primary key but I am unable to fetch value.I have written the following query:
    select model_code from BL_VEHICLE_ENGINE_NAME where catalog_code=:p9_catalog_code
    Here p9_catalog_code is the item displaying pop up lov.
    when i am specifying a particular value rather than bind value as (select model_code from BL_VEHICLE_ENGINE_NAME where catalog_code=123) then the description corresponding to this value is getting displayed through display only item.
    How can i fetch value from pop up lov and utilize that value to display required description.Is displaying description through display only item correct or is there any other way around through which this description could be displayed more effectively.
    Thanks
    Abhi

    Hi Abhi,
    Instead of pop up lov you can use cascade lov ie when u have data like say if u select code from ur table 123 and it has more than one description then u can use cascade lov it will query upon the first lov what u required.
    Or coming to ur problem
    for code pageitem say p1_code u are using pop lov (you can try select list instead of pop up lov )
    and for description u r using display column.
    and give the source as return single query only
    select descp from table where code=:P1code.
    Hopes this helps you
    Thanks & Regards
    Srikkanth.M

  • How to pass the bind variable value to the sql statement of the LOV

    Hi,
    I am using Forms 10g builder.
    I have a text item which will be populated by a LOV when i press a button, but i have a bind variable in the SQL statement of the LOV. That bind variable should be replaced by a value which is derived from a radio group in the same data block.
    For Ex: ( )radio1 ( )radio2
    before i click on the push button, I'll select one of the radio button above,so my question is how to assign this radio group value to the bind variable in the sql statement in the LOV?
    Pl any hint is appreciated!
    Thanks
    Reddy

    The variable can be taken into account in the SELECT order contained in the Record Group used by the LOV.
    e.g. Select ... From ... Where column = :block.radio_group ...Francois

  • How to reset the military usage value in GTS Business partner

    Hello Experts,
    Does anyone know how to reset the Military usage value='2' to blank on the Business partner within GTS?
    I tried putting a blank there, clicking on the accept entries button followed by  saving the Business partner.
    It does not seem to work this way.
    Does anyone know if it's SAP bug for not having blank as one of the allowable values for the usage except when it's that way while newly created?
    The GTS implementation details are as follows:
    Any help with regard to this will be much appreciated......
    Thanks,
    Prashant.

    Prashant,
    As I already informed you, it is not possible to re-set the indicator to <blank>.
    From the program code, I can see that the usage indicator is only transferred from the feeder system during the creation of a customer partner.  The value in GTS is set either to '1' or '2' during creation, and cannot be changed by any subsequent data transfer from the feeder system.
    I think that logic is related to the fact that usage records may be created for multiple Legal Regulations, and those records may then be changed individually by the user in GTS.  On that basis, it would not be reasonable to over-write the values by re-transferring the customer from the feeder system.
    Regards,
    Dave

  • How to record vhs tape to mac

    how to record vhs tape to mac

    Most "on the fly" digitization for the Mac was abandoned as "just too fussy" for successful daily use. Instead, cameras that pre-digitized and passed the digitized packets (with NO time contraints) were adopted instead.
    The Hardware to do this capture is now old and cranky, and never got substantially cheaper. It is not a good value.
    The affordable way to transfer VHS tapes to digital form today is to find a local service to do a one-time transfer for a fee.

  • How to find if COLUMN DEFAULT VALUE is stored as metadata?

    Hello,
    I'm using Oracle 11g enhanced ADD COLUMN Functionality. Adding new columns with DEFAULT values and NOT NULL constraint no longer requires the default value to be stored in all existing records.
    Sometimes we change DB columns from NOT NULL with DEFAULT to NULL with DEFAULT. This operation "materialize" column default.
    Is there an easy way (Dictionary view) how to find, that COLUMN default value is stored as metadata or is "materialized" ?
    Thanks. Filip
    Oracle RDBMS version : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production

    Thanks for your suggestion, but it is not what i'm looking for :-(
    I don't need to find the default value, i need to know how is default value stored. It could be stored in 2 ways.
    1. "materialized" - prior to 11G (value is physicaly stored for every column)
    2. "as a metadata" - new 11G functionality (default is not physicaly stored and if you query the column DB transalte NULL value to defaut value)
    Now I would like to now if my column is type 1) or 2). How can I do it?
    Thank you.Filip

  • How to get the anchor tag values in next jsp

    Hey all,
    I have two jsp files.
    in first jsp,
    I am getting the resultset.
    I am setting the resultset to the anchor tag.
    below is the code...
    <a target="_top" rel="contents" rev="contents" class="fordynamiclabel" href="ASCMasterTwo.jsp"><%=rSet.getString(1) %></a></td>
    whenever he click on any anchor tag,
    It will goes to ACSMasterTwo.jsp page for edit the compleate record.
    how to get the anchor tag value in that page...
    Please help me on this.

    You have to pass a parameter. An id is good.
    Of course you have to get an id from somewhere in the result set right?
    <a target="_top" rel="contents" rev="contents" class="fordynamiclabel" href="ASCMasterTwo.jsp?id=<%= rSet.getString("id") %>"><%=rSet.getString(1) %></a></td>Then you call
    request.getParameter("id");
    and look up the values related to that id in the database.

  • [HELP] How to records user who use SQLPlus or SQL editor?

    Dear Gurus,
    Is onyone know how to record user who use SQLplus or any SQL editor?
    for instance...
    user1 using SQLplus on monday august 9.30.21 PM...and I have table which record this for audit user.
    Or..
    Can I block user who connect to oracle using SQLPlus?
    If anyone know how to do this..please inform me...
    Thanks and Regards
    Erie

    You can enable Auditing (AUDIT_TRAIL) and audit at the Session Level to record Logon and Log off of a required user. This can be enabled to be recorded in the audit table or operation system file. You can also audit user statements etc.
    For example, to enable auditing connect for user UGONIC
    SQL>audit connect by UGONIC;
    TO disable it
    SQL>noaudit connect by UGONIC;
    Check in the SQL Reference for the AUDIT statement and requirements.
    If you do not want the user to connect at all via SQL*Plus, you can use PRODUCT_USER_PROFILE to disable a users access to SQL*Plus or at the lower level, disable specified SQL*Plus and SQL commands for the user. You need to run the PUPBLD.SQL script as system user (if not run yet) and add records to it as required.
    Example: After running PUPBLD.SQL. This entry stops the user UGONIC from using the drop command at the backend in SQL*Plus.
    INSERT into product_user_profile (product,userid,attribute,char_value,date_value)
    values('SQL*Plus','UGONIC','DROP','DISABLED',NULL);
    Note that if a user is already connected by the profile entry, it is not activated on that session, but on subsequent logons. Again read the requied security documentations for this.
    For both auditing, you need to set the required database intialisation parameters and know where to get the audit records (in tables, views or OS file). For instance, when using tables, you maintain and query tables like audit$ to view the logs. When using OS type logging, it is recorded on the path specified in the AUDIT_FILE_DEST init parameter (In Windows, it is logged in the Windows Event and you can view it from the event viewer).

Maybe you are looking for