How to redirect "-verbose" Java Runtime Parameter setting to text file

Simple question: I am adding a "-verbose" Java Runtime Parameter in the Java Applet Runtime Settings of the Java Control Panel. When I run my applet, a Windows console opens which outputs all the method calls, classes, and jar file information. How can I redirect this output to a text file?
I noticed Xloggc:+filename+ but there does not seem to be an equivalent for redirecting the '-verbose' output to a file.
Thanks!
Edited by: zillius on Dec 14, 2007 1:47 PM

Thank you both for the reply, but unfortunately that is not quite what I am looking for. The console Window I am talking about is a DOS console screen, not the Java Console
What I am really after here is the ability to redirect a thread dump of a running applet to a text file. When the applet is active, and the "-verbose" parameter is set in the Java Runtime Parameters", I can see all the classes, methods etc. being loaded in the DOS window. Hitting Ctrl-Break at that point will produce a thread dump in the DOS console screen. I would like to be able to redirect THAT output to a text file. It is not in the Java Console. To me it looks like tracing and logging are only for the Java Console, no?
Thanks again for your help.
Edited by: zillius on Dec 19, 2007 7:17 AM

Similar Messages

Multiple Users on one PC sharing Java Runtime Parameter setting

Is there a way to have mutiple logins share the -Smx512m setting in Java Runtime Parameters. It seems that when each person logs into the PC to use the application we have to enter the same Java Runtime Parametes again. Is there a way to add it once and every login uses it?
Thanks,
DLS

I have read the Deployment Configuration file and Properties and do not see how the -Xmx51m should be added to the deployment.properties.
Also it would seem you would need to use the deployment.system.config file so it would be used by all users on the PC.
Again I can not see an example of how to put in the "Java Runtime Parameters" in the deployment.system.properties file.
Has anyone done this before and could lead me in the correct directions?
Thanks,
DLS

Java runtime parameter (-classpath)

Hi,
Does anyone know how to programmatically set the java-runtime-parameters?
I need to set them to: "-classpath c:\jar\test.jar"
My goal is to access test.jar thru the ActiveX Bridge, and test.jar is not inside the "applet" folder (nor the "ext" folder). Note: ActiveX bridge uses the java plug-in which has a default path to the applet folder, I need to programmatically set a java-runtime-parameter "-classpath" to c:\jar\test.jar...
(I know that you can set the java-runtime-parameters thru control panel - java plug-in, but this will not work for what I am doing, I need to do it on the fly programmatically).
Gene.

People I have tried this after trying all that I could fine on the internet,
What did not work is as follows:
1) Setting "-Xmx512m", where "512" should be replaced by 3/4 of the system
physical memory size.
2) Also enable "<APPLET> tag support" for Internet Explorer. Apply settings.
This worked for some.
3) Also tried uncheking the box for <APPLET> but that was not to work.
"What --WORKED-- for me at last was:"
1. Uninstall Internet Explorer 7.
2. Restart System.
3. Uninstall Java 1,5 with Update 9(that was installed)
4. Install Java version 1.5 with upgrade 5 from the link:
http://www.tucows.com/preview/194327
5. Then go to Start, Run, type
iexplore
and hit Enter.
Try the sites now.. It works:)
6. Then disable update for Java in Control panel. (Also do not update IE or
JAVA after that)
Hope this help ya all!!!

How to redirect in java code not the jsp or any other

hello
can any one help me how to redirect in java pages the code must be in java function not in jsp or any thing else
thanks in advance

Function? Don't you rather mean method?
Anyway, in JSF you can send a redirect using ExternalContext#redirect(). If your JSF environment is on top of JSP/Servlet, then under the hood it basically invokes HttpServletResponse#sendRedirect() and FacesContext#responseComplete().

How to read a tab seperated data from a text file using utl_file

Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
Naveen

Naveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

How can we generate the reports in html or text file formats?

Hi,
Is there any package that can help in creating HTMLDB reports in .txt files or .html files? (Similar to TEXT_IO in Oracle Forms)
How can we generate the reports in html or text file formats from HTMLDB?
Thanks in Advance
Renjith

Hello all.
Bi Publisher is great, but has a very high price tag. It's even more expensive than Forms & Reports Services. We are considering APEX to replace Forms & Reports on the web, but the reporting limitations are still a problem.
I wonder if there is another option.
Thanks

How do I export/import keyboard shortcuts to a text file

How do I export/import keyboard shortcuts to a text file?
It would be nice to export them, edit and/or add to them in a text editor on my iMac, then import them back into iPhone and iPad.

You can backup the bookmarks to a file, then copy that file to the new computer and import them, for details see [[Backing up and restoring bookmarks]].
You can copy more than just the bookmarks. The user data, such as bookmarks and passwords, are stored in the profile folder. You can copy the data manually by copying the contents of the profile folder, for details see [http://kb.mozillazine.org/Profile_backup Profile backup - MozillaZine Knowledge Base] or [[Backing up your information]].
There are some add-ons and utilities that can make this process easier. The first one is the [https://addons.mozilla.org/en-US/firefox/addon/2109/ FEBE] add-on which can be used to copy a profile. Another option is the free [http://mozbackup.jasnapaka.com/ MozBackup] utility.

Java 2d to read a text file containing vrml

Hi I was wondering if anyone could tell me how I can get have 2d to read a text file such as one in vrml.
How would I go about doing this as right now i have 2 files which i want to integrate, a 2d plan and a vrml correspondant.
Thanks in advance

You pretty much posted this same question yesterday. You know you need to use String.split(). Why don't you give it a try and let us know what you did?
I'm pretty sure you'll need to form your regular expression as "~#^\\$", because $ has special meaning inside a search expression.
Oh, and please use the code tag when posting code.

How to Use Multiple Java Runtimes

Hi,
I have installed two JRE versions (1.2.2 and 1.4.0_01) in my Machine (Windows platform).
(The default if 1.2.2 as it was installed later)
I want to run an application in either of the above JRE's. To do so...
If I want to run the application on 1.2.2
I use C:\jdk1.2.2\bin\java MyApplication
If I want to run the application on 1.4
I use C:\jdk1.4\bin\java MyApplication
Basically I am hardcoding the path where the "java" executable lies..
Now my question is, Is this the correct/only way to use different JRE's?? Is there any other cleaner way to use multiple java runtimes??
There is some parameter for "java.exe" where we can set version
like "java -Dversion=1.4.0_01". Can this be helpful??
Thanks in advance
Hiten

You could use DOS environment variables to define the jre path to use.

How Do I RemovE Java Runtime Environment?

I have just updated software on my iMac. The software update included an update to Java.
Since updating, I am unable to open Limewire P2P programme. I have reinstalled Limewire several times but still not working.
Tech support at Limewire have advised me to uninstall Java Runtime Environment and reinstall.
Can anyone advise how to do this please?
thanks

The newest version of Limewire, version 5, will only run on a Core 2 Duo, with Java SE 6 for Mac installed. Java SE 6 is 64 bit, hence the need for a C2D. Java SE 6 is not activated by default when it is installed.
It can be activated with the Java Preferences app in Apps/Utlities, in the General pane. Drag Java SE 6 to the top of the 2 lists to make it active. I had to restart and then install Limewire 5 before I could get it to work.

How to refresh/apply column value default setting on current files or folders

Hi All
I have set-up default column data per folder in my library (via
Library Settings > Column default settings) and it works great for new documents or folders that are added to the library.
But what do I do if I have an existing Library with folders and files and need to apply default column data to each? Is there a way of "refreshing" the default columns so that the data is populated through a specific folder and/or its sub-folders?
(I really hope this is an easy fix or just a setting that I over-looked somewhere!)
Thank you!

I had to do this as well recently, and remembered your post.
Here is the function I wrote , this worked for text, choice, and metadata columns
It is pretty slow and could be optimized and broken up into more functions, but I had to do several things:
1. I mass-updated the content types in a library
2. On Library settings : set default values and also different defaults per folder
3. For each file I then needed to:
3.a. either copy the value from a column in the old content type to the new, or
3.b. set the column to the default
so this function does step 3, like I said it works for certain types of columns and can be sped up (I used it to update 700 files in a couple minutes), and it makes some assumptions about the environment but this at least is a starting point.
As Alex said you may want to change SystemUpdate($true) to just Update(), depending on your requirements.
<#
.SYNOPSIS
Resets columns in a document library to defaults for blank columns. Use this
after changing the content types or adding columns to a doc lib with existing files
.DESCRIPTION
Resets columns in a doc lib to their defaults. Will only set them if the columns are blank (unless overridden)
Will also copy some values from one column to another while you are there.
Can restrict the update to a subset of columns, or have it look for all columns with defaults.
Will use the list defaults as well as folder defaults.
All names of columns passed in should use InternalName.
This has ONLY been tested on Text, Choice, Metadata, and mult-Choice and Mult-Metadata columns
Pass in a list and it will recursively travel down the list to update all items with the defaults for the items in that folder.
If you call it on a folder, it will travel up the tree of folders to find the proper defaults
Author:
Chris Buchholz
[email protected]
@plutosdad
.PARAMETER list
The document library to update. Using this parameter it will update all files in the doc lib
.PARAMETER folder
The folder containing files to update. Function will update all files in this folder and subfolders.
.PARAMETER ParentFolderDefaults
Hashtable of internal field names as KEY, and value VALUE, summing up all the parent folders or list defaults.
If not supplied, then the function will travel up the tree of folders to the parent doclib to determine
the correct defaults to apply.
If the field is managed metadata, then the value is a string
Currently only tested for string and metadata values, not lookup or date
.PARAMETER termstore
The termstore to use if you are going to update managed metadata columns, this assumes we are only using the one termstore for all columns to update
If you are using the site collection specific termstore for some columns you want to update, and
the central termstore for others, then you should call this method twice, once with each termstore,
and specify the respective columns in fieldsToUpdate
.PARAMETER fieldsToCopy
Hashtable of internal field names, where KEY is the "to" field, and VALUE is the "from" field
Use this to copy values from one field to another for the item.
These override the defaults, and also cause the "from" (Value) fields to NOT be overwritten with defaults even if
they are in the fieldsToUpdate array.
Example: @{"MyNewColumn" = "My_x0020_Old_x0020_Column"}
.PARAMETER fieldsToUpdate
If supplied then the method will update only the fields in this array to their default values, if null then it will update
all fields that have defaults.
If you pass in an empty array, then this method will only copy fields in the fieldtocopy and not
apply any defaults
Example: @() - to only copy and not set any fields to default
Example2: @('UpdateField1','UpdateField2') will
.EXAMPLE
Set-SPListItemValuesToDefaults -list $list -fieldsToCopy @{"MyNewColumn" = "My_x0020_Old_x0020_Column"} -fieldsToUpdate @() -overwrite -termStore $termStore
This will not set any defaults, but instead only set MyNewColumn to non null values of My_x0020_Old_x0020_Column
It will overwrite any values of MyNewColumn
.EXAMPLE
Set-SPListItemValuesToDefaults -list $list -overwrite
This will set all columns to their default values even if they are filled in already
.EXAMPLE
Set-SPListItemValuesToDefaults -folder $list.RootFolder.SubFolder[3].SubFolder[5]
This will set all columns to their defaults in the given subfolder of a library
.EXAMPLE
Set-SPListItemValuesToDefaults -list $list -fieldsToUpdate @('ColumnOneInternalName','ColumnTwoInternalName')
This will set columns ColumnOneInternalName and ColumnTwoInternalName to their defaults for all items where they are currently null
.EXAMPLE
Set-SPListItemValuesToDefaults -list $list -fieldsToCopy @{"MyNewColumn" = "My_x0020_Old_x0020_Column"} -fieldsToUpdate @("MyNewColumn") -termStore $termStore
This will set all MyNewColumn values to their default, and then also copy the values of My_x0020_Old_x0020_Column to MyNewColumn where the old column is not null,
but both of these will only happen for items where MyNewColumn is null
.EXAMPLE
Set-SPListItemValuesToDefaults -list $list -fieldsToCopy @{"MyNewColumn" = "My_x0020_Old_x0020_Column"} -termStore $termStore
This will set ALL columns with defaults to the default value (if the item's value is null),
except for My_x0020_Old_x0020_Column which will not be modified even if it has a default value, and will also set MyNewColumn to the
value of My_x0020_Old_x0020_Column if the old value is not null
#>
function Set-SPListItemValuesToDefaults {
[CmdletBinding(SupportsShouldProcess=$true)]
param(
[Parameter(Mandatory=$true,ValueFromPipeline=$true,ParameterSetName="List")][Microsoft.SharePoint.SPList]$list,
[Parameter(Mandatory=$true,ValueFromPipeline=$true,ParameterSetName="Folder")][Microsoft.SharePoint.SPFolder]$folder,
[Parameter(Mandatory=$false,ParameterSetName="Folder")][HashTable]$ParentFolderDefaults,
[Parameter(Mandatory=$false)][HashTable]$fieldsToCopy,
[Parameter(Mandatory=$false)][Array]$fieldsToUpdate,
[Parameter(Mandatory=$false)][Microsoft.SharePoint.Taxonomy.TermStore]$termStore,
[Switch]$overwrite,
[Switch]$overwriteFromFields
begin {
#one or both can be null, but if both empty, then nothing to do
if ($null -ne $fieldsToUpdate -and $fieldsToUpdate.Count -eq 0 -and
( $null -eq $fieldsToCopy -or $fieldsToCopy.Count -eq 0)) {
Write-Warning "No fields to update OR copy"
return
if ($PSCmdlet.ParameterSetName -eq "Folder") {
$list = $folder.DocumentLibrary
if ($null -eq $termStore ) {
$taxonomySession = Get-SPTaxonomySession -site $list.ParentWeb.Site
$termStores = $taxonomySession.TermStores
$termStore = $termStores[0]
#if we did not pass in the parent folder defaults then we must go backward up tree
if ($PSCmdlet.ParameterSetName -eq "Folder" -and $null -eq $ParentFolderDefaults ) {
$ParentFolderDefaults = @{}
if ($null -eq $fieldsToUpdate -or $fieldsToUpdate.Count -gt 0) {
write-Debug "ParentFolderDefaults is null"
$tempfolder=$folder.ParentFolder
while ($tempfolder.ParentListId -ne [Guid]::Empty) {
Write-Debug "at folder $($tempfolder.Url)"
$pairs = $columnDefaults.GetDefaultMetadata($tempfolder)
foreach ($pair in $pairs) {
if (!$ParentFolderDefaults.ContainsKey($pair.First)) {
Write-Debug "Folder $($tempfolder.Name) default: $($pair.First) = $($pair.Second)"
$ParentFolderDefaults.Add($pair.First,$pair.Second)
$tempfolder = $tempfolder.ParentFolder
#listdefaults
Write-Debug "at list"
foreach ($field in $folder.DocumentLibrary.Fields) {
if ($field.InternalName -eq "_ModerationStatus") { continue }
#$field = $list.Fields[$name]
if (![String]::IsNullOrEmpty($field.DefaultValue)) {
#Write-Verbose "List default found key $($field.InternalName)"
if (!$ParentFolderDefaults.ContainsKey($field.InternalName)) {
Write-Debug "List Default $($field.InternalName) = $($field.DefaultValue)"
$ParentFolderDefaults.Add($field.InternalName,$field.DefaultValue)
process {
Write-Debug "Calling with $($PSCmdlet.ParameterSetName)"
Write-Debug "Parent folder hash has $($ParentFolderDefaults.Count) items"
if ($PSCmdlet.ParameterSetName -eq "List" ) {
$folder = $list.RootFolder
$ParentFolderDefaults=@{}
if ($null -eq $fieldsToUpdate -or $fieldsToUpdate.Count -gt 0) {
foreach ($field in $list.Fields) {
if ($field.InternalName -eq "_ModerationStatus") { continue }
if (![String]::IsNullOrEmpty($field.DefaultValue)) {
Write-Debug "List Default $($field.InternalName) = $($field.DefaultValue)"
$ParentFolderDefaults.Add($field.InternalName,$field.DefaultValue)
Write-Verbose "At folder $($folder.Url)"
$FolderDefaults=@{}
$FolderDefaults += $ParentFolderDefaults
if ($null -eq $fieldsToUpdate -or $fieldsToUpdate.Count -gt 0) {
$pairs = $columnDefaults.GetDefaultMetadata($folder)
foreach ($pair in $pairs) {
if ($FolderDefaults.ContainsKey($pair.First)) {
$FolderDefaults.Remove($pair.First)
Write-Debug "Folder $($folder.Name) default: $($pair.First) = $($pair.Second)"
$FolderDefaults.Add($pair.First,$pair.Second)
#set values
foreach ($file in $folder.Files) {
if ($file.CheckOutType -ne [Microsoft.SharePoint.SPFile+SPCheckOutType]::None) {
Write-Warning "File $($file.Url).CheckOutType = $($file.CheckOutType)) ... skipping"
continue
$item = $file.Item
$ItemDefaults=@{}
$ItemDefaults+= $FolderDefaults
#if we only want certain fields then remove the others
#Move this to every time we add values to the defaults
if ($null -ne $fieldsToUpdate ) {
$ItemDefaults2=@{}
foreach ($fieldInternalName in $fieldsToUpdate) {
try {
$ItemDefaults2.Add($fieldInternalName,$ItemDefaults[$fieldInternalName])
} catch { } #who cares if not in list
$ItemDefaults = $ItemDefaults2
#do not overwrite already filled in values unless specified
if (!$overwrite) {
$keys = $itemDefaults.Keys
for ($i=$keys.Count - 1; $i -ge 0; $i-- ) {
$key=$keys[$i]
try {
$val =$item[$item.Fields.GetFieldByInternalName($key)]
if ($val -ne $null) {
$ItemDefaults.Remove($key)
} catch {} #if fieldname does not exist then ignore, we should check for this earlier
#do not overwrite FROM fields in copy list unless specified
if (!$overwriteFromFields) {
if ($null -ne $fieldToCopy -and $fieldsToCopy.Count -gt 0) {
foreach ($value in $fieldsToCopy.Values) {
try {
$ItemDefaults.Remove($value)
} catch {} #who cares if not in list
#do not overwrite TO fields in copy list if we're going to copy instead
if (!$overwriteFromFields) {
if ($null -ne $fieldToCopy -and $fieldsToCopy.Count -gt 0) {
foreach ($key in $fieldsToCopy.Keys) {
$fromfield = $item.Fields.GetFieldByInternalName($fieldsToCopy[$key])
try {
if ($null -ne $item[$fromfield]) {
$ItemDefaults.Remove($key)
} catch {} #who cares if not in list
Write-Verbose $item.Url
$namestr = [String]::Empty
if ($ItemDefaults.Count -eq 0) {
write-Verbose "No defaults, copy only"
} else {
$str = $ItemDefaults | Out-String
$namestr += $str
Write-Verbose $str
if ($null -ne $fieldsToCopy -and $fieldsToCopy.Count -gt 0) {
$str = $fieldsToCopy | Out-String
$namestr +=$str
if ($PSCmdlet.ShouldProcess($item.Url,"Set Values: $namestr"))
#defaults
if ($null -ne $ItemDefaults -and $ItemDefaults.Count -gt 0) {
foreach ($key in $ItemDefaults.Keys) {
$tofield = $item.Fields.GetFieldByInternalName($key)
if ($tofield.TypeAsString -like "TaxonomyFieldType*") {
$taxfield =[Microsoft.SharePoint.Taxonomy.TaxonomyField]$tofield
$taxfieldValue = New-Object Microsoft.SharePoint.Taxonomy.TaxonomyFieldValue($tofield)
$lookupval=$ItemDefaults[$key]
$termval=$lookupval.Substring( $lookupval.IndexOf('#')+1)
$taxfieldValue.PopulateFromLabelGuidPair($termval)
if ($tofield.TypeAsString -eq "TaxonomyFieldType") {
$taxfield.SetFieldValue($item,$taxfieldValue)
} else {
#multi
$taxfieldValues = New-Object Microsoft.SharePoint.Taxonomy.TaxonomyFieldValueCollection $tofield
$taxfieldValues.Add($taxfieldValue)
$taxfield.SetFieldValue($item,$taxfieldValues)
} else {
$item[$field]=$ItemDefaults[$key]
#copyfields
if ($null -ne $fieldsToCopy -and $fieldsToCopy.Count -gt 0) {
#$fieldsToCopy | Out-String | Write-Verbose
foreach ($key in $fieldsToCopy.Keys) {
$tofield = $item.Fields.GetFieldByInternalName($key)
$fromfield = $item.Fields.GetFieldByInternalName($fieldsToCopy[$key])
if ($null -eq $item[$fromfield] -or ( !$overwrite -and $null -ne $item[$tofield] )) {
continue
if ($tofield.TypeAsString -eq "TaxonomyFieldType" -and
$fromfield.TypeAsString -notlike "TaxonomyFieldType*" ) {
#non taxonomy to taxonomy
$taxfield =[Microsoft.SharePoint.Taxonomy.TaxonomyField]$tofield
$termSet = $termStore.GetTermSet($taxfield.TermSetId)
[String]$fromval = $item[$fromfield]
$vals = $fromval -split ';#' | where {![String]::IsNullOrEmpty($_)}
if ($null -ne $vals -and $vals.Count -ge 0 ) {
$val = $vals[0]
if ($vals.Count -gt 1) {
write-Warning "$($item.Url) Found more than one value in $($fromfield.InternalName)"
continue
$terms =$termSet.GetTerms($val,$true)
if ($null -ne $terms -and $terms.Count -gt 0) {
$term = $terms[0]
$taxfield.SetFieldValue($item,$term)
Write-Verbose "$($tofield.InternalName) = $($term.Name)"
} else {
Write-Warning "Could not determine term for $($fromfield.InternalName) for $($item.Url)"
continue
} elseif ($tofield.TypeAsString -eq "TaxonomyFieldTypeMulti" -and
$fromfield.TypeAsString -notlike "TaxonomyFieldType*" ) {
Write-Debug "we are here: $($item.Name): $($fromfield.TypeAsString) to $($tofield.TypeAsString )"
#non taxonomy to taxonomy
$taxfield =[Microsoft.SharePoint.Taxonomy.TaxonomyField]$tofield
$termSet = $termStore.GetTermSet($taxfield.TermSetId)
$taxfieldValues = New-Object Microsoft.SharePoint.Taxonomy.TaxonomyFieldValueCollection $tofield
[String]$fromval = $item[$fromfield]
$vals = $fromval -split ';#' | where {![String]::IsNullOrEmpty($_)}
foreach ($val in $vals){
$terms =$termSet.GetTerms($val,$true)
if ($null -ne $terms -and $terms.Count -gt 0) {
$term=$terms[0]
$taxfieldValue = New-Object Microsoft.SharePoint.Taxonomy.TaxonomyFieldValue($tofield)
$taxfieldValue.TermGuid = $term.Id.ToString()
$taxfieldValue.Label = $term.Name
$taxfieldValues.Add($taxfieldValue)
} else {
Write-Warning "Could not determine term for $($fromfield.InternalName) for $($item.Url)"
continue
#,[Microsoft.SharePoint.Taxonomy.StringMatchOption]::ExactMatch,
$taxfield.SetFieldValue($item,$taxfieldValues)
$valsAsString = $taxfieldValues | Out-String
Write-Debug "$($tofield.InternalName) = $valsAsString"
} elseif ($tofield.TypeAsString -eq "TaxonomyFieldTypeMulti" -and
$fromfield.TypeAsString -eq "TaxonomyFieldType" ) {
#single taxonomy to multi
$taxfieldValues = New-Object Microsoft.SharePoint.Taxonomy.TaxonomyFieldValueCollection $tofield
$taxfield =[Microsoft.SharePoint.Taxonomy.TaxonomyField]$tofield
$taxfieldValues.Add($item[$fromfield])
$taxfield.SetFieldValue($item,$taxFieldValues)
Write-Verbose "$($tofield.InternalName) = $valsAsString"
} elseif ($tofield.TypeAsString -eq "TaxonomyFieldType" -and
$fromfield.TypeAsString -eq "TaxonomyFieldTypeMulti" ) {
#multi taxonomy to single taxonomy
Write-Warning "multi to non multi - what to do here"
continue
} elseif ($tofield.TypeAsString -eq "Lookup" -and
$fromfield.TypeAsString -ne "Lookup" ) {
#non lookup to lookup
Write-Warning "non lookup to lookup - still todo"
continue
} else {
#straight copy
$item[$tofield] = $item[$fromfield]
$item.SystemUpdate($false)
$folders = $folder.SubFolders | where name -ne "Forms"
$folders | Set-SPListItemValuesToDefaults -ParentFolderDefaults $FolderDefaults -fieldsToCopy $fieldsToCopy -fieldsToUpdate $fieldsToUpdate -overwrite:$overwrite -overwriteFromFields:$overwriteFromFields -termStore $termStore

How to make the Open/Save dialogue download the text file instead of JSP

I am currently coding on a JSP program, which searches the database and writes the resultset into a file on the server, and then allows the client to download this tab delimited text file onto their local machine. But I met a problem, when the default Open or Save dialogue appears, it shows that it's trying to download the running JSP file from my local host instead of the newly-created text file. Despite this, when I click OK to either Open or Save the file, a warning dialogue will appear saying: The explorer cann't download this file, it's unable to find this internet site or something like that. I get no error message from the server but I was always told that Javax.servlet.ServletException: getWriter() was already called. What does this mean?
I guess maybe this is caused by the mix use of outputStreams in my program. I don't know if there is a way to directly read the resultset from the database and then send it through outputStream to the client. My solution is: first create a file on the server to hold the resultset, and then output this file to the client. I did all these in one JSP program: Create file on the server, search database, and then read file and output the contents to client. Is this correct? I attached my code, please feel free to correct any of my mistake? Thanks!
//global.class is a class dealing with database connection
<%@ page language="java" import="java.sql.*,java.util.*,java.math.*,java.io.*,ises.*,frmselection.*" %>
<jsp:useBean id="global" scope="session" class="ises.Global" />
/>

<%
//get query statement from the session
String sQuery = "";
if (session.getAttribute("sQuery")!=null && !(session.getAttribute("sQuery").toString()).equals(""))
sQuery = session.getAttribute("sQuery").toString();
String path = "c:/temp";
String fileName = "temp.TXT";
File file= null;
FileOutputStream fo = null;
PrintStream ps = null;
try {
     file = new File(path,fileName);
     if(file.exists()) {
     file.delete();
     file.createNewFile();
     fo = new FileOutputStream(file);
     ps = new PrintStream(fo);
}catch(IOException exp){
     System.out.println("IO Exception: " +exp.toString() );
java.sql.ResultSet recResults     = null;
java.sql.Statement STrecResults = null;
STrecResults = global.getConnection().createStatement();
recResults = STrecResults.executeQuery(sQuery);
ResultSetMetaData meta = recResults.getMetaData();
int columns = meta.getColumnCount();
String [] tempColumnName = new String[columns];
String [] ColumnName =null;
int DisColumns = 0;
int unDisCol = 0;
String sLine = "";
if(recResults.next()) {     //if_1
for(int n=0;n<columns;n++) {
String temp = meta.getColumnName(n+1);
if(!temp.equals("PROJECTID")&&!temp.equals("BUILDINGID")&&!temp.equals("HAZMATPROFILEID")) {
sLine = sLine + "'" + temp + "'" + " ";
tempColumnName[DisColumns] = temp;
DisColumns ++;
ColumnName = new String[DisColumns];
}else {
unDisCol ++;
}//end for
for(int i=0;i<(columns-unDisCol);i++) {
ColumnName[i] = tempColumnName;
ps.println(sLine);
do{
sLine = "";
for(int n=0;n<(columns-unDisCol);n++) {
String tempColName = recResults.getString(ColumnName[n]);
if(tempColName==null) {
sLine = sLine + "" + " ";
} else {
     sLine = sLine + "'"+tempColName+"'" + " ";
ps.println(sLine);
}while(recResults.next());
}     //end if_1
recResults.close();
recResults = null;
STrecResults.close();
STrecResults = null;
%>


<%
//set the content type to text
response.setContentType ("plain/text");
//set the header and also the Name by which user will be prompted to save
response.setHeader ("Content-Disposition", "attachment;filename=temp.TXT");
//Open an input stream to the file and post the file contents thru the servlet output stream to the client
InputStream in = new FileInputStream(file);
ServletOutputStream outs = response.getOutputStream();
int bit = 256;
try {
     while ((bit) >= 0) {
     bit = in.read();
outs.write(bit);
} catch (IOException ioe) {
ioe.printStackTrace(System.out);
outs.flush();
outs.close();
in.close();
%>


Thanks. I believe something wrong with this statement
in my program:
You are correct there is something wrong with this statement. Seeing how you are doing this in a jsp, not really what they're made for but thats another topic, the output stream has already been called. When a jsp gets compiled it creates a few implicit objects, one of them being the outputstream out, and it does this by calling the response.getWriter(). getWriter or getOutputStream can only be called once, other wise you will get the exception you are experiencing. This is for both methods as well, seeing how the jsp compiles and calls getWriter means that you cannot call getOutputStream. Calling one makes the other throw the exception if called as well. As far as the filename problem in the browser goes I'm guessing that it's in IE. I've had some problems before when I had to send files to the browser through a servlet and remember having to set an inline attribute of some sort in the content-dis header inorder to get IE to see the real filename. The best way to solve this is to get the orielly file package and use that. It is very easy to use and understand and does all of this for you already. Plus it's free. Cant beat that.
ServletOutputStream outs =
response.getOutputStream();
because I put a lot of printout statement within my
code, and the program stops to print out exactly
before the above statement. And then I get the
following message, which repeats several times:
ServletExec: caught exception -
javax.servlet.ServletException: getWriter() was
already called.

OMB Plus : how to get all the generated messages into a text file ?

Hello,
I wrote an OMB TCL script and I would like to know how to get all the messages generated during the exécution into a text file.
I tried this, but it works only for a puts command :
set DesProjet ACT_1
set filename [ open "c:\\temp\\INFDE_010_IMPORT_REPOSITORY_$DesProjet.log" w]
puts "test"
Thank you for your help

Hello Alain, you should try the OMBLOG variable. If you set it inside OMBPlus:
set OMBLOG c:/temp/mylog.txtthen all the OWB specific commands are logged with their output. By OWB specific I mean all those that start with OMB.
This is more than what you see in the interface, because:
- messages inside procedures are logged; you wouldn't see them on std.output when you call a proc
- variables are resolved, so if you issue the command
set my_var VERY_IMPORTANT_TABLE
OMBDROP TABLE '$v_myvar'the log will show:
OMBDROP TABLE 'VERY_IMPORTANT_TABLE'
Table dropped
and you know something is wrong... so OMBLOG is very useful to intercept all manipulations on you repository.
If what you want instead is a dump of the screen output when you execute a script, I suggest you redirect standard output from the operating system command line. Unfortunately OMBPlus doesn't support all advanced redirection and tracing features of the TCL language.
Hope this helps, Antonio

How to input data into an arraylist from a text file?

I am trying to take data from a text file and put that data into an arraylist. First here is the text file:
[item1, 10, 125.0, item2, 10, 12.0, item3, 20, 158.0]
3
4530.0
[item5, 65, 555.5, item4, 29, 689.0]
2
56088.5
[item7, 84, 34.5, item6, 103, 0.5, item8, 85, 1.36]
3
3065.1The text between the [ ] is the output from my arraylists. I have three arraylists. The first [ ] belongs to arraylist A, the second to arraylist B, and the third to arraylist C. The format of the arraylists is this:
<item name>,<# in stock>,<value of one item>
The first number below the arraylists in the text file represents the number of items in the list. The second number below the arraylists represents the total value of the items in the arraylists.
Here is the class file I have (yes, it does everything):
import java.io.*;
import java.util.Scanner;
import java.util.ArrayList;
public class Inventory extends Object
     public int toAdd = 0;
     private boolean done = false;               //Are we done yet?
     public String strItemName;                    //The name of the item type.
     public int intNumInStock;                    //The number in stock of that type.
     public double dblValueOfOneItem;          //The value of one item.
    public String strNumberInStock;
    public double dblTotalValueA;               //The total value of warehouse A.
    public double dblTotalValueB;               //The total value of warehouse B.
    public double dblTotalValueC;               //The total value of warehouse C.
    public int intWarehouseAItemCount;          //Counter for items in warehouse A.
    public int intWarehouseBItemCount;          //Counter for items in warehouse B.
    public int intWarehouseCItemCount;          //Counter for items in warehouse C.
     ArrayList warehouseAList = new ArrayList();     //Create the Warehouse A ArrayList.
     ArrayList warehouseBList = new ArrayList(); //Create the Warehouse B arrayList.
     ArrayList warehouseCList = new ArrayList(); //Create the Warehouse C arrayList.
     /** Construct a new Inventory object. */
     public Inventory()
          super();
     /**Add items to the Warehouse A ArrayList.*/
     private void createWareHouseA()
          System.out.println("!" + toAdd + " item types will be added to warehouse A.");
          //Cast
          String strNumInStock = Integer.toString(intNumInStock);
          String strValueOfOneItem = Double.toString(dblValueOfOneItem);
          this.strNumberInStock = strNumInStock;
          System.out.println("!Initial size of warehouseAList : " +
                                                            warehouseAList.size());
          //Add items to the array List
          warehouseAList.add(this.strItemName);
          warehouseAList.add(this.strNumberInStock);
          warehouseAList.add(this.dblValueOfOneItem);
          System.out.println("!size of arrayList after additions " + warehouseAList.size());
     /**Add items to the Warehouse B ArrayList.*/
     private void createWareHouseB()
          System.out.println("!" + toAdd + " item types will be added to warehouse B.");
          //Cast
          String strNumInStock = Integer.toString(intNumInStock);
          String strValueOfOneItem = Double.toString(dblValueOfOneItem);
          this.strNumberInStock = strNumInStock;
          System.out.println("!Initial size of warehouseBList : " +
                                                            warehouseBList.size());
          //Add items to the array List
          warehouseBList.add(this.strItemName);
          warehouseBList.add(this.strNumberInStock);
          warehouseBList.add(this.dblValueOfOneItem);
          System.out.println("!size of arrayList after additions " + warehouseBList.size());
     /**Add items to the Warehouse C ArrayList.*/
     private void createWareHouseC()
          System.out.println("!" + toAdd + " item types will be added to warehouse C.");
          //Cast
          String strNumInStock = Integer.toString(intNumInStock);
          String strValueOfOneItem = Double.toString(dblValueOfOneItem);
          this.strNumberInStock = strNumInStock;
          System.out.println("!Initial size of warehouseCList : " +
                                                            warehouseCList.size());
          //Add items to the array List
          warehouseCList.add(this.strItemName);
          warehouseCList.add(this.strNumberInStock);
          warehouseCList.add(this.dblValueOfOneItem);
          System.out.println("!size of arrayList after additions " + warehouseCList.size());
     /**Interpret the commands entered by the user.*/
     public void cmdInterpreter()
          this.displayHelp();
          Scanner cin = new Scanner(System.in);
          while (!this.done)
               System.out.print(">");
               //"line" equals the next line of input.
               String line = cin.nextLine();
               this.executeCmd(line);
     /**Execute one line entered by the user.
      * @param cmdLN; The command entered by the user to execute. */
      private void executeCmd(String cmdLN)
           Scanner line = new Scanner(cmdLN);
           if (line.hasNext())
                String cmd = line.next();
                //What to do when users enter the various commands below.
                if (cmd.equals("help"))
                     this.displayHelp();
                else if (cmd.equals("Q!"))
                     this.done = true;
                else if (cmd.equals("F") && line.hasNext())
                     this.inputFromFile(line.next());
                else if (cmd.equals("K") && line.hasNext())
                     int numItemsToAdd = Integer.valueOf( line.next() ).intValue();
                     this.toAdd = numItemsToAdd;
                     this.inputFromKeyboard(numItemsToAdd);
      /**What to do if input comes from a file.
       *     @param inputFile; The name of the input file to process.*/
      private void inputFromFile(String inputFile)
           Scanner cin = new Scanner(System.in);
           System.out.println("!Using input file " + inputFile + ".");
           System.out.print("!Enter the name of the output file: ");
           String outputFile = cin.next();
           System.out.println("!Using output file " + outputFile + ".");
          try
               BufferedReader in = new BufferedReader(new FileReader(inputFile));
               //Scanner in = new Scanner(new File(inputFile));
               //Initialize the String variables.
               String line1 = null;
               String line2 = null;
               String line3 = null;
               String line4 = null;
               String line5 = null;
               String line6 = null;
               String line7 = null;
               String line8 = null;
               String line9 = null;
               System.out.println(in.equals(",") + " see?");
               //System.out.println((char)(char)in.read() + " experiment");
               /**This loop assigns values to the string variables based on the
                * values on each line in the input file. */
               while(in.readLine() != null)
                    line1 = in.readLine();
                    line2 = in.readLine();
                    line3 = in.readLine();
                    line4 = in.readLine();
                    line5 = in.readLine();
                    line6 = in.readLine();
                    line7 = in.readLine();
                    line8 = in.readLine();
                    line9 = in.readLine();
               //Print the contents of each line in the input file.
               System.out.println("!value of line 1: " + line1);
               System.out.println("!value of line 2: " + line2);
               System.out.println("!value of line 3: " + line3);
               System.out.println("!value of line 4: " + line4);
               System.out.println("!value of line 5: " + line5);
               System.out.println("!value of line 6: " + line6);
               System.out.println("!value of line 7: " + line7);
               System.out.println("!value of line 8: " + line8);
               System.out.println("!value of line 9: " + line9);
            /**Add items to the warehouses.*/
               warehouseAList.add(line1);
               warehouseBList.add(line4);
               warehouseCList.add(line7);
            /**Add the item count and total value for warehouse A.*/
               int intLine2 = Integer.valueOf(line2).intValue();
               this.intWarehouseAItemCount = intLine2;
               double dblLine3 = Double.valueOf(line3).doubleValue();
               this.dblTotalValueA = dblLine3;
            /**Add the item count and total value for warehouse B.*/
               int intLine5 = Integer.valueOf(line5).intValue();
               this.intWarehouseBItemCount = intLine5;
               double dblLine6 = Double.valueOf(line6).doubleValue();
               this.dblTotalValueB = dblLine6;
            /**Add the item count and total value for warehouse C.*/
              int intLine8 = Integer.valueOf(line8).intValue();
              this.intWarehouseCItemCount = intLine8;
              double dblLine9 = Double.valueOf(line9).doubleValue();
              this.dblTotalValueC = dblLine9;
            /**Ask the user how many items to add or delete from inventory.*/
              System.out.print("Enter the number to add to inventory for " +
                                                           warehouseAList.get(0) + ":");
              String toAddOrDel = cin.next();
            /**Print the contents of all the warehouses. */
               System.out.println(" ");
               //Print the contents of warehouse A.
               System.out.println("!--------------------------------");
               System.out.println("!----------Warehouse A:----------");
               System.out.println("!--------------------------------");
               //Print the item list for warehouse A.
               System.out.println(warehouseAList);
               //Print the total amount of items in warehouse A.
               System.out.println("Total items: " + this.intWarehouseAItemCount);
               //Print the total value of the items in warehouse A.
               System.out.println("Total value: " + this.dblTotalValueA);
               System.out.println("!--------------------------------");
               System.out.println("!----------Warehouse B:----------");
               System.out.println("!--------------------------------");
               //Print the item list for warehouse B.
               System.out.println("!warehouseB: " + warehouseBList);
               //Print the total amount of items in warehouse B.
               System.out.println("Total items: " + this.intWarehouseBItemCount);
               //Print the total value of the items in warehouse B.
               System.out.println("Total value: " + this.dblTotalValueB);
               System.out.println("!--------------------------------");
               System.out.println("!----------Warehouse C:----------");
               System.out.println("!--------------------------------");
               //Print the item list for warehouse C.
               System.out.println("!warehouseC: " + warehouseCList);
               //Print the total amount of items in warehouse C.
               System.out.println("Total items: " + this.intWarehouseCItemCount);
               //Print the total value of the items in warehouse C.
               System.out.println("Total value: " + this.dblTotalValueC);
               in.close();
          catch (FileNotFoundException e)
               System.out.println("!Error: Unable to open file for reading.");
          catch (EOFException e)
               System.out.println("!Error: EOF encountered, file may be corrupted.");
          catch (IOException e)
               System.out.println("!Error: Cannot read from file.");
      /**What to do if input comes from the keyboard.
       *     @param numItems; The total number of items that will be added to the
       *                      Warehouse(s). */
      public void inputFromKeyboard(int numItems)
           System.out.println("!You will be adding " + numItems + " items to " +
                                         "inventory from the keyboard. ");
           this.toAdd = numItems;
           Scanner cin = new Scanner(System.in);
           //Prompt user for name of output file.
           System.out.print("!Enter the name of the output file: ");
           String outputFile = cin.next();
           /**This loop asks the user for information about the item(s) and inputs
             *them into the appropriate array.*/
           int count = 0;
           while (numItems > count)
                //Item name.
                System.out.print("!Item name: ");
                String addItemName = cin.next();
                //Number in stock.
                System.out.print("!Number in stock: ");
                String addNumInStock = cin.next();
                //Initial warehouse.
                System.out.print("!Initial warehouse(A,B,C): ");
                String addInitWarehouse = cin.next();
                //Value of one item.
                System.out.print("!Value of one item: ");
                String addValueOfOneItem = cin.next();
                //Add or delete from inventory
                System.out.print("!Enter amount to add or delete from inventory: ");
                String strAddOrDelete = cin.next();
                System.out.println("!Amount to add or delete: " + strAddOrDelete);
                //Cast
                int intAddNumInStock = Integer.valueOf(addNumInStock).intValue();
                double doubleAddValueOfOneItem = Double.valueOf(addValueOfOneItem).doubleValue();
                int intAddOrDelete = Integer.valueOf(strAddOrDelete).intValue();
                /**Add intAddNumInStock with intAddOrDelete to determine the amount
                 * to add or delete from inventory (If a user wishes to remove items
                 * from inventory simply add negative values). */
                intAddNumInStock = intAddNumInStock + intAddOrDelete;
                System.out.println("!Inventory after modifications: " + strAddOrDelete);
                this.strItemName = addItemName;
                this.intNumInStock = intAddNumInStock;
                this.dblValueOfOneItem = doubleAddValueOfOneItem;
                //Put items into warehouse A if appropriate.
                if (intAddNumInStock < 25)
                    //Increment the warehouse A item count.
                    this.intWarehouseAItemCount = this.intWarehouseAItemCount + 1;
                    //Calculate the total value of warehouse A.
                    this.dblTotalValueA = this.dblTotalValueA + intAddNumInStock * doubleAddValueOfOneItem;
                    //Create the warehouse A array list.
                    this.createWareHouseA();
                //Put items into warehouse B if appropriate.
                if (intAddNumInStock >= 25)
                    if (intAddNumInStock < 75)
                         //Increment the warehouse B item count.
                         this.intWarehouseBItemCount = this.intWarehouseBItemCount + 1;
                         //Calculate the total value of warehouse B.
                         this.dblTotalValueB = this.dblTotalValueB + intAddNumInStock * doubleAddValueOfOneItem;
                         //Create the warehouse B array list.
                         this.createWareHouseB();
                //Put items into warehouse C if appropriate.
                if (intAddNumInStock >= 75)
                    //Increment the warehouse C item count.
                    this.intWarehouseCItemCount = this.intWarehouseCItemCount + 1;
                    //Calculate the total value of warehouse C.
                    this.dblTotalValueC = this.dblTotalValueC + intAddNumInStock * doubleAddValueOfOneItem;
                    //Create the warehouse C array list.
                    this.createWareHouseC();
                 //display helpful information.
                System.out.println("!--------------------------------");
                System.out.println("!" + addItemName + " is the item name.");
                System.out.println("!" + addNumInStock + " is the number in stock.");
                System.out.println("!" + addInitWarehouse + " is the initial warehouse.");
                System.out.println("!" + addValueOfOneItem + " is the value of one item.");
                System.out.println("!--------------------------------------------------");
               //Increment the counters.
                count++;
           /**Create and write to the output file. */
           try
                 //Use the output file specified by the user.
                PrintWriter out = new PrintWriter(outputFile);
             /**Write warehouse A details.*/
                  //Blank the first line.
                  out.println(" ");
                //Write the array list for warehouse A.
                out.println(warehouseAList);
                //Write the amount of items in warehouse A.
                out.println(intWarehouseAItemCount);
                //Write the total value for warehouse A.
                out.println(dblTotalValueA);
             /**Write warehosue B details.*/
               //Write the array list for warehouse B.
                out.println(warehouseBList);
                //Write the amount of items in warehouse B.
                out.println(intWarehouseBItemCount);
                //Write the total value for warehouse B.
                out.println(dblTotalValueB);
             /**Write warehouse C details.*/
                  //Write the array list for warehouse C.
                out.println(warehouseCList);
                //Write the amount of items in warehouse C.
                out.println(intWarehouseCItemCount);
                //Write the total value for warehouse C.
                out.println(dblTotalValueC);
                //Close the output file.
                out.close();
            catch (FileNotFoundException e)
               System.out.println("Error: Unable to open file for reading.");
           catch (IOException e)
               System.out.println("Error: Cannot read from file.");
           /**View the contents and the value of each warehouse.*/
           System.out.println("!---------------Inventory Summary------------------");
           System.out.println("!--------------------------------------------------");
           System.out.println("!--------------------LEGEND:-----------------------");
           System.out.println("!<item type>, <amount in stock>,<value of one item>");
           System.out.println("!--------------------------------------------------");
           System.out.println("!------------------Warehouse A:--------------------");
           System.out.println("!--------------------------------------------------");
           //Display Items in warehouse A.
           System.out.println(warehouseAList);
           //Total items in warehouse A.
           System.out.println("Total items: " + intWarehouseAItemCount);
           //Display total value of warehouse A.
           System.out.println("Total value: " + "$" + dblTotalValueA);
           System.out.println("!--------------------------------------------------");
           System.out.println("!------------------Warehouse B:--------------------");
           System.out.println("!--------------------------------------------------");
           //Display Items in warehouse B.
           System.out.println(warehouseBList);
           //Total items in warehouse B.
           System.out.println("Total items: " + intWarehouseBItemCount);
           //Display total value of warehouse B.
           System.out.println("Total value: " + "$" + dblTotalValueB);
           System.out.println("!--------------------------------------------------");
           System.out.println("!------------------Warehouse C:--------------------");
           System.out.println("!--------------------------------------------------");
           //Display Items in warehouse C.
           System.out.println(warehouseCList);
           //Total items in warehouse C.
           System.out.println("Total items: " + intWarehouseCItemCount);
           //Display total value of warehouse C.
           System.out.println("Total value: " + "$" + dblTotalValueC);
     /**Display a help message.*/
     private void displayHelp()
          System.out.println("!--------------------------------");
          System.out.println("! General Help:");
          System.out.println("!--------------------------------");
          System.out.println("! ");
          System.out.println("!'help' display this help message.");
          System.out.println("!'Q!' quit this program.");
          System.out.println("!--------------------------------");
          System.out.println("! Input File Specific Commands:");
          System.out.println("!--------------------------------");
          System.out.println("! ");
          System.out.println("!'F' <name> type F followed by the name of the " +
                                   "file to be used for input.");
          System.out.println("!---------------------------------------");
          System.out.println("! Input From Keyboard Specific Commands:");
          System.out.println("!---------------------------------------");
          System.out.println("! ");
          System.out.println("!'K' <number> type K followed by the number of " +
                                    "items that will be added. ");
          System.out.println("! ");
}Program file:
public class InventoryProg
     public static void main(String[] args)
          //Create a new Inventory object.
          Inventory test = new Inventory();
          //Execute the command interpreter.
          test.cmdInterpreter();
}Right now I am stuck on this and I cannot progress any further until I figure out how to input the data in the text file back into a arraylist.
Thanks in advance.

Thanks but I figured it out. Heres a sample of the code i used to solve my problem:
try
                       //Warehouse A BufferedReader.
               BufferedReader inA = new BufferedReader(new FileReader(inputFileWarehouseA));
               //Warehouse B BufferedReader.
               BufferedReader inB = new BufferedReader(new FileReader(inputFileWarehouseB));
               //Warehouse C BufferedReader.
               BufferedReader inC = new BufferedReader(new FileReader(inputFileWarehouseC));
               //Warehouse details BufferedReader.
               BufferedReader inDetails = new BufferedReader(new FileReader(inputFileDetails));
               //Will hold values in warehouse arraylists.
               String lineA = null;
               String lineB = null;
               String lineC = null;
               //Will hold the details of each warehouse.
               String line1 = null;
               String line2 = null;
               String line3 = null;
               String line4 = null;
               String line5 = null;
               String line6 = null;
               //Get the item count and total value for each warehouse.
               while(inDetails.readLine() != null)
                    line1 = inDetails.readLine();
                    line2 = inDetails.readLine();
                    line3 = inDetails.readLine();
                    line4 = inDetails.readLine();
                    line5 = inDetails.readLine();
                    line6 = inDetails.readLine();
           /**Assign the item count and total value to warehouse A.*/
              //Cast.
               int intLine1 = Integer.valueOf(line1).intValue();
               double dblLine2 = Double.valueOf(line2).doubleValue();
               //Assign the values.
               this.intWarehouseAItemCount = intLine1;
               this.dblTotalValueA = dblLine2;
            /**Assign the item count and total value to warehouse B.*/
                 //Cast.
               int intLine3 = Integer.valueOf(line3).intValue();
               double dblLine4 = Double.valueOf(line4).doubleValue();
                 //Assign the values.
               this.intWarehouseBItemCount = intLine3;
               this.dblTotalValueB = dblLine4;
            /**Assign the item count and total value to warehouse C.*/
                 //Cast.
                 int intLine5 = Integer.valueOf(line5).intValue();
               double dblLine6 = Double.valueOf(line6).doubleValue();
               //Assign the values.
               this.intWarehouseCItemCount = intLine5;
               this.dblTotalValueC = dblLine6;
            /**Put the items back into the warehouses arraylists. */
               //Add items to warehouse A.
               while((lineA = inA.readLine()) != null)
                    warehouseAList.add(lineA);
               //Add items to warehouse B.
               while((lineB = inB.readLine()) != null)
                    warehouseBList.add(lineB);
               //Add items to warehouse C.
               while((lineC = inC.readLine()) != null)
                    warehouseCList.add(lineC);
               }(this isn't the whole try statement its pretty long)

How to only read the last line in the text file by using BufferedReader ?

Dear all,
Hello, I am new to Java. Do anybody know how to read the last line (this is the last record) in the text file.The method I am now using is reading from the first line until I reach the last line in the text file. Thank you!!
BufferedReader br = new BufferedReader(new FileReader("c:\\sdk1.4.1\\bin\\dbExport.txt"));
DataInputStream in = new DataInputStream(new FileInputStream("c:\\sdk1.4.1\\bin\\dbExport.txt"));
String input;
String firstinput;
String secondinput;
int count=90;
int year=1955;
while ((input = br.readLine()) != null) {
firstinput = input.substring(0, 10);
secondinput = input.substring(10);
String insertStore1 = ("INSERT INTO AUTHORS " +
"VALUES ('" + count + "', '" + firstinput + "', '" + secondinput + "', 1955)");
System.out.println(insertStore1);
int result = stmt.executeUpdate(insertStore1);

I suppose you could use a java.io.RandomAccessFile.

How to redirect "-verbose" Java Runtime Parameter setting to text file

Similar Messages

Maybe you are looking for