How to Reduce the Gate count of a Design(RTL gate count)
Hi All,
I am a newbie to FPGA design and implemetation. I have a design (H.264 Encoder) and implemented on zynq zc702 (which is having Artix7 FPGA fabric). Now we need to implement it on zynq zc706 with reduced gate count ( because we are going to add some more blocks like rate control etc.,)
How to reduce the gate count ?
Please guide me regarding this query.
Thanks,
Ramesh
Try to reduce the overall control set. Registers in the slice shares the same control set so if the number of registers in the control set do not divide cleanly, some registers may go unused.
Make sure correct DSP and BRAM blocks are getting inferred by the tool
Try to map FSM in BRAM.
Use Synthesis and Implementation level strategies.
See if any module is having high utilization and can be reduced by changing RTL: report_utilization -hierarchical -file utilization.txt
Thanks,
Anusheel
Search for documents/answer records related to your device and tool before posting query on forums.
Search related forums and make sure your query is not repeated.
Please mark the post as an answer "Accept as solution" in case it helps to resolve your query.
Helpful answer -> Give Kudos
Similar Messages
-
Does de-authorising reduce the authorisation count?
I have heard rumour that de-authorising previously authorised PC/devices doesn't actually reduce the activation count for ADE.
I this true?
I got a bit carried away when I 1st started and authorised 3 PCs at home and my bebook reader. My bebook reader had to be returned due to fault - unfortunately I didn't de-authorise it before it - adobe support tells me that there's nothing I can do about that (so that's one activation gone) and when the replacement reader turns up another activation will be used - that will be five in total - so if de-authorising does nothing to the count I'm left with one authorisation till the end of time - I've asked suppoort about this and haven't had an answer - I'm a little wary of buying more ADE books if the authorisations run out (due to pc failure or reader failure or uprades of either) and being stuck with a library I can't access.
I've checked around the forums and it looks like exceeding the authorisation count is not an uncommon problem and there appears little progress on fixing the problem on Adobe's part.
I am still waiting for a reply to the last post.
Following is my discussion with support -
Ok I understand that I can't de-activate the reader now it has been returned but assuming I keep using digital editions for years to
come, as PCs die or need the hard-drive replaced/reformated and the breakdown usually occurs without warning (ie I don't get the ch
ance to de-activate the PC) won't I eventually run out of activations? (I've already lost one to the returned ebook, one on the PC I
download with and one to the new reader when it arrives)
Under those circumstances do I have to then create a new accounbt and lose access to all my previously purchased ebooks?
I would have thought the record of authorisations would be held by adobe and therefore able to be removed/reset by adobe.
I'm just trying to understand the authorisation process before I invest too much in digital edition ebooks.
The number of authorisations is something else I'm little confused about I read in one place that I could have 6 PCs AND 5 ebooks de
vices but I think I reade on the adbode site that it is only 5 PCs or devices in total.
Thanks for your assistance with these queries
Notes to Customer
Thursday, May 20, 2010 6:44:21 PM PDT
Hi Catherine,
Thank you for getting back to us. I appreciate your promptness in
responding to our email.
The information provided was really helpful in understanding the issue.
As per the latest update provided by you my understanding is that you
have returned your E-reader to your vendor for replacement.
Catherine , I would like to inform you that in this case you are not
able to de-activate your E-reader because it must be connected to the
computer.
However you can de-authorize your remaining computers by simple process
advised in last interaction.
You can also try referring to our knowledge base and User to User forums
by clicking on the following links:
Knowledge base: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com authorization
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Thanks for contacting Adobe Technical Web Support and we appreciate your
time spent.
Have a nice day.
Regards,
Abhishek maheshwari,
Adobe Technical Support
Notes from Customer
Thursday, May 20, 2010 6:02:47 AM PDT
Hi,
Thank you for the response, I haven't had time to check my email until today. Unfortunately I had already returned the ebook to the
seller for warranty replacement when I sent my query, so I can't connect it to my computer to deactivate it's subscription. Is the
re another way of deactivating the ebook from my authorisations list without having the device physically present?
regards,
Catherine Taylor
Notes to Customer
Monday, May 17, 2010 11:54:57 AM PDT
Hi Catherine,
Thank you for contacting Adobe Technical Support. My Name is Abhishek.
This is in regards to your query posted on the Adobe web support portal
regarding an issue with Adobe Digital Editions.
At the outset please accept our gratitude for choosing Adobe.
Based on the information provided by you, my understanding of your issue
is that you want to deactivate your faulty E-reader and Digital Editions
from your unused computers.
Catherine , I would like to inform you that you do not need to
De-authorize Digital Editions completely from every device you use, just
follow the below steps to De-activate extra subscriptions from your
unused computers and E-reader.
1. To deactivate E-reader>
a. Connect your E-reader with computer .
b. Launch E-reader and press Ctrl+ Shift+E to deactivate it.
2. To deactivate Digital Editions from computers>
a. Launch Adobe Digital Editions on the computer you want to
deactivate .
b. Press Ctrl+ Shift+ D to deactivate it.
I believe,This will resolve your query .
In future, if you face any problems with Adobe Products., You could try
referring to our knowledge base and User to User forums by clicking on
the following links:
Knowledge Base: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
You can visit our product page at: www.adobe.com/products
Your technical support case number for this interaction is: 181592641
Have a nice day.
PLEASE NOTE: Dear Customer, we will be waiting for your reply on this
case. In case you are unable to respond we will be sending you a
reminder on the 2nd day (From the day of our response to you) and then
the case will be auto closed on 7th day assuming your issue is resolved.
However, you can reopen your case by visiting our web support portal
and we will be happy to assist you further.
Regards,
Abhishek Maheshwari,
Adobe Technical Support
Notes from Customer
Monday, May 17, 2010 3:22:56 AM PDT
Hi, I'm new to digital editions and I tried installing and authorizing three PCs and one ebook reader while learning how to use digi
tal editions (got a bit carried away).
My ebook reader has a fault and I'm returning it and expect to recieve a new unit soon. My question is how do I go about deactivatin
g the ebook reader prior to return and can I deactivate the PCs so I can authorize only the PCs I need. I assume without deactivatin
g something I will run out of activations at some point.
I suppose if I could de-authorize everything and start again that would be great - assuming I don't lose the rights to the books I h
ave already purchased.>I have heard rumour that de-authorising previously authorised PC/devices doesn't actually reduce the activation count for ADE.
>I this true?
Yes, you only want to deauthorize when getting rid of a machine (as a step remove your personal information), or when directed to by a competent tech support person.
If you run out of activations you will need to contact tech support by going to http://www.adobe.com/support/digitaleditions and clicking on 'Submit a web case' -
How to reduce the query fetch from TKPROF output?
Hi,
Below is my query contains the TKPROF output.Here fetch is too high. How to reduce the fetch from here. And please check the explain plan is good or not?
SELECT czci.config_hdr_id,
czci.config_rev_nbr,
asoqla.quantity,
(SELECT
node_desc.LOCALIZED_STR
FROM CZ_LOCALIZED_TEXTS node_desc,
CZ_PS_NODES ps_nodes,
CZ_CONFIG_ITEMS czci1
WHERE czci1.config_hdr_id = asoqld.config_header_id
AND czci1.config_rev_nbr = asoqld.config_revision_num
AND node_desc.INTL_TEXT_ID = ps_nodes.INTL_TEXT_ID
AND NVL(node_desc.LANGUAGE,userenv('LANG')) = userenv('LANG')
AND czci1.PS_NODE_ID = ps_nodes.PERSISTENT_NODE_ID
AND ps_nodes.DEVL_PROJECT_ID = (SELECT MAX(DEVL_PROJECT_ID) FROM CZ_DEVL_PROJECTS WHERE NAME LIKE 'Control Model')
AND czci1.PARENT_CONFIG_ITEM_ID IN (SELECT sub_sub.CONFIG_ITEM_ID FROM CZ_CONFIG_ITEMS sub_sub
WHERE sub_sub.CONFIG_HDR_ID = asoqld.config_header_id
AND sub_sub.CONFIG_REV_NBR = asoqld.config_revision_num
AND sub_sub.PS_NODE_NAME = 'fittings')) fitting_material,
(SELECT
node_desc.LOCALIZED_STR
FROM CZ_LOCALIZED_TEXTS node_desc,
CZ_PS_NODES ps_nodes,
CZ_CONFIG_ITEMS czci
WHERE czci.config_hdr_id = asoqld.config_header_id
AND czci.config_rev_nbr = asoqld.config_revision_num
AND node_desc.INTL_TEXT_ID = ps_nodes.INTL_TEXT_ID
AND NVL(node_desc.LANGUAGE,userenv('LANG')) = userenv('LANG')
AND czci.PS_NODE_ID = ps_nodes.PERSISTENT_NODE_ID
AND ps_nodes.DEVL_PROJECT_ID = (SELECT MAX(DEVL_PROJECT_ID) FROM CZ_DEVL_PROJECTS WHERE NAME LIKE 'Control Model')
AND czci.PARENT_CONFIG_ITEM_ID IN (SELECT sub_sub.CONFIG_ITEM_ID FROM CZ_CONFIG_ITEMS sub_sub
WHERE sub_sub.CONFIG_HDR_ID = czci.CONFIG_HDR_ID
AND sub_sub.CONFIG_REV_NBR = czci.CONFIG_REV_NBR
AND sub_sub.PS_NODE_NAME = 'tubing')) tubing_material
FROM aso_quote_lines_all asoqla,
aso_quote_line_details asoqld,
cz_config_items czci
WHERE asoqla.quote_header_id = 55774
AND asoqla.item_type_code = 'MDL'
--AND asoqla.org_id = 2763
AND asoqla.quote_line_id = asoqld.quote_line_id
AND asoqld.config_header_id = czci.config_hdr_id
AND asoqld.config_revision_num = czci.config_rev_nbr
AND czci.ps_node_name = 'CONTROL MASTER ASLY'
call count cpu elapsed disk query current rows
Parse 1 0.04 0.03 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 3 0.09 0.08 0 5100 0 19
total 5 0.13 0.12 0 5100 0 19
Misses in library cache during parse: 1
Optimizer goal: ALL_ROWS
Parsing user id: 173 (APPS)
Rows Row Source Operation
3 TABLE ACCESS BY INDEX ROWID CZ_LOCALIZED_TEXTS (cr=2161 pr=0 pw=0 time=32425 us)
40 NESTED LOOPS (cr=2158 pr=0 pw=0 time=32276 us)
3 NESTED LOOPS (cr=2147 pr=0 pw=0 time=32156 us)
3 NESTED LOOPS (cr=925 pr=0 pw=0 time=15885 us)
3 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=665 pr=0 pw=0 time=13456 us)
5490 INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=96 pr=0 pw=0 time=1237 us)(object id 3049621)
3 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=260 pr=0 pw=0 time=2401 us)
1094 INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=19 pr=0 pw=0 time=250 us)(object id 3049621)
3 TABLE ACCESS BY INDEX ROWID CZ_PS_NODES (cr=1222 pr=0 pw=0 time=16249 us)
3 INDEX RANGE SCAN CZ_PS_NODES_N12 (cr=1219 pr=0 pw=0 time=16211 us)(object id 750095)
1 SORT AGGREGATE (cr=1211 pr=0 pw=0 time=16125 us)
209 TABLE ACCESS FULL CZ_DEVL_PROJECTS (cr=1211 pr=0 pw=0 time=15883 us)
18 INDEX RANGE SCAN CZ_LOCALIZED_TEXTS_N1 (cr=11 pr=0 pw=0 time=68 us)(object id 31504)
3 TABLE ACCESS BY INDEX ROWID CZ_LOCALIZED_TEXTS (cr=2161 pr=0 pw=0 time=31499 us)
40 NESTED LOOPS (cr=2158 pr=0 pw=0 time=31351 us)
3 NESTED LOOPS (cr=2147 pr=0 pw=0 time=31215 us)
3 NESTED LOOPS (cr=925 pr=0 pw=0 time=15271 us)
3 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=665 pr=0 pw=0 time=12441 us)
5490 INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=96 pr=0 pw=0 time=1230 us)(object id 3049621)
3 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=260 pr=0 pw=0 time=2795 us)
1094 INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=19 pr=0 pw=0 time=264 us)(object id 3049621)
3 TABLE ACCESS BY INDEX ROWID CZ_PS_NODES (cr=1222 pr=0 pw=0 time=15920 us)
3 INDEX RANGE SCAN CZ_PS_NODES_N12 (cr=1219 pr=0 pw=0 time=15863 us)(object id 750095)
1 SORT AGGREGATE (cr=1211 pr=0 pw=0 time=15753 us)
209 TABLE ACCESS FULL CZ_DEVL_PROJECTS (cr=1211 pr=0 pw=0 time=15452 us)
18 INDEX RANGE SCAN CZ_LOCALIZED_TEXTS_N1 (cr=11 pr=0 pw=0 time=79 us)(object id 31504)
19 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=778 pr=0 pw=0 time=20571 us)
5816 NESTED LOOPS (cr=202 pr=0 pw=0 time=8497 us)
21 NESTED LOOPS (cr=96 pr=0 pw=0 time=2037 us)
23 TABLE ACCESS BY INDEX ROWID ASO_QUOTE_LINES_ALL (cr=47 pr=0 pw=0 time=1427 us)
1058 INDEX RANGE SCAN ASO_QUOTE_LINES_ALL_N1 (cr=9 pr=0 pw=0 time=51 us)(object id 81688)
21 TABLE ACCESS BY INDEX ROWID ASO_QUOTE_LINE_DETAILS (cr=49 pr=0 pw=0 time=596 us)
21 INDEX RANGE SCAN ASO_QUOTE_LINE_DETAILS_N1 (cr=28 pr=0 pw=0 time=323 us)(object id 81706)
5794 INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=106 pr=0 pw=0 time=1424 us)(object id 3049621)Hi
After affed the exist operator i got below output. But it is more than that the previous one.
SELECT czci.config_hdr_id, czci.config_rev_nbr, asoqla.quantity,
(SELECT node_desc.localized_str
FROM cz_localized_texts node_desc,
cz_ps_nodes ps_nodes,
cz_config_items czci1
WHERE czci1.config_hdr_id = asoqld.config_header_id
AND czci1.config_rev_nbr = asoqld.config_revision_num
AND node_desc.intl_text_id = ps_nodes.intl_text_id
AND NVL (node_desc.LANGUAGE, USERENV ('LANG')) = USERENV ('LANG')
AND czci1.ps_node_id = ps_nodes.persistent_node_id
AND ps_nodes.devl_project_id = (SELECT MAX (devl_project_id)
FROM cz_devl_projects
WHERE NAME = 'Control Model')
AND EXISTS (
SELECT NULL
FROM cz_config_items sub_sub
WHERE sub_sub.config_hdr_id = asoqld.config_header_id
AND sub_sub.config_rev_nbr = asoqld.config_revision_num
AND sub_sub.ps_node_name = 'fittings'
AND czci1.parent_config_item_id = sub_sub.config_item_id))
fitting_material,
(SELECT node_desc.localized_str
FROM cz_localized_texts node_desc,
cz_ps_nodes ps_nodes,
cz_config_items czci1
WHERE czci1.config_hdr_id = asoqld.config_header_id
AND czci1.config_rev_nbr = asoqld.config_revision_num
AND node_desc.intl_text_id = ps_nodes.intl_text_id
AND node_desc.LANGUAGE = USERENV ('LANG')
AND czci1.ps_node_id = ps_nodes.persistent_node_id
AND ps_nodes.devl_project_id = (SELECT MAX (devl_project_id)
FROM cz_devl_projects
WHERE NAME = 'Control Model')
AND EXISTS (
SELECT NULL
FROM cz_config_items sub_sub
WHERE sub_sub.config_hdr_id = czci.config_hdr_id
AND sub_sub.config_rev_nbr = czci.config_rev_nbr
AND sub_sub.ps_node_name = 'tubing'
AND czci1.parent_config_item_id = sub_sub.config_item_id))
tubing_material
FROM aso_quote_lines_all asoqla,
aso_quote_line_details asoqld,
cz_config_items czci
WHERE asoqla.quote_header_id = 55774
AND asoqla.item_type_code = 'MDL'
--AND asoqla.org_id = 2763
AND asoqla.quote_line_id = asoqld.quote_line_id
AND asoqld.config_header_id = czci.config_hdr_id
AND asoqld.config_revision_num = czci.config_rev_nbr
AND czci.ps_node_name = 'CONTROL MASTER ASLY'
call count cpu elapsed disk query current rows
Parse 1 0.02 0.03 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 3 0.16 0.14 0 16526 0 19
total 5 0.18 0.17 0 16526 0 19
Misses in library cache during parse: 1
Optimizer goal: ALL_ROWS
Parsing user id: 173 (APPS)
Rows Row Source Operation
3 TABLE ACCESS BY INDEX ROWID CZ_LOCALIZED_TEXTS (cr=7874 pr=0 pw=0 time=51192 us)
40 NESTED LOOPS (cr=7871 pr=0 pw=0 time=50953 us)
3 NESTED LOOPS (cr=7860 pr=0 pw=0 time=50729 us)
3 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=6638 pr=0 pw=0 time=33183 us)
3 INDEX RANGE SCAN CZ_CONFIG_ITEMS_N1 (cr=6635 pr=0 pw=0 time=33060 us)(object id 31734)
3 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=6536 pr=0 pw=0 time=22873 us)
1292 INDEX UNIQUE SCAN CZ_CONFIG_ITEMS_PK (cr=5244 pr=0 pw=0 time=15326 us)(object id 3049621)
3 TABLE ACCESS BY INDEX ROWID CZ_PS_NODES (cr=1222 pr=0 pw=0 time=17483 us)
3 INDEX RANGE SCAN CZ_PS_NODES_N12 (cr=1219 pr=0 pw=0 time=17411 us)(object id 750095)
1 SORT AGGREGATE (cr=1211 pr=0 pw=0 time=17266 us)
209 TABLE ACCESS FULL CZ_DEVL_PROJECTS (cr=1211 pr=0 pw=0 time=16844 us)
18 INDEX RANGE SCAN CZ_LOCALIZED_TEXTS_N1 (cr=11 pr=0 pw=0 time=122 us)(object id 31504)
3 NESTED LOOPS (cr=7874 pr=0 pw=0 time=48203 us)
3 NESTED LOOPS (cr=7860 pr=0 pw=0 time=47973 us)
3 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=6638 pr=0 pw=0 time=30352 us)
3 INDEX RANGE SCAN CZ_CONFIG_ITEMS_N1 (cr=6635 pr=0 pw=0 time=30218 us)(object id 31734)
3 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=6536 pr=0 pw=0 time=20960 us)
1292 INDEX UNIQUE SCAN CZ_CONFIG_ITEMS_PK (cr=5244 pr=0 pw=0 time=14224 us)(object id 3049621)
3 TABLE ACCESS BY INDEX ROWID CZ_PS_NODES (cr=1222 pr=0 pw=0 time=17570 us)
3 INDEX RANGE SCAN CZ_PS_NODES_N12 (cr=1219 pr=0 pw=0 time=17510 us)(object id 750095)
1 SORT AGGREGATE (cr=1211 pr=0 pw=0 time=17395 us)
209 TABLE ACCESS FULL CZ_DEVL_PROJECTS (cr=1211 pr=0 pw=0 time=16937 us)
3 TABLE ACCESS BY INDEX ROWID CZ_LOCALIZED_TEXTS (cr=14 pr=0 pw=0 time=165 us)
3 INDEX UNIQUE SCAN CZ_LOCALIZED_TEXTS_PK (cr=11 pr=0 pw=0 time=132 us)(object id 3050530)
19 TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=778 pr=0 pw=0 time=41677 us)
5816 NESTED LOOPS (cr=202 pr=0 pw=0 time=16173 us)
21 NESTED LOOPS (cr=96 pr=0 pw=0 time=3617 us)
23 TABLE ACCESS BY INDEX ROWID ASO_QUOTE_LINES_ALL (cr=47 pr=0 pw=0 time=2528 us)
1058 INDEX RANGE SCAN ASO_QUOTE_LINES_ALL_N1 (cr=9 pr=0 pw=0 time=83 us)(object id 81688)
21 TABLE ACCESS BY INDEX ROWID ASO_QUOTE_LINE_DETAILS (cr=49 pr=0 pw=0 time=1053 us)
21 INDEX RANGE SCAN ASO_QUOTE_LINE_DETAILS_N1 (cr=28 pr=0 pw=0 time=598 us)(object id 81706)
5794 INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=106 pr=0 pw=0 time=8245 us)(object id 3049621) -
How to reduce the level of free text / direct purchasing
A common problem at all sites is how to reduce the level of free text / direct / non catalogue based purchasing. This is where users enter an account assignment and free text instead of using an existing material number.
This is often the case because it is too "dificult" for the user to search and find the correct material number.
How have other sites handled this?
has anyone found a solution that if a user enters lets say "paper" into the free text box, a pop up appears with a match on possible materials with the word "paper" in the short description? This sounds like a pretty easy function to implement? Does anyone have the code?
Cheerio>
Ravi.or.raj wrote:
> The search function you ask for is pretty much a standard functionality.
> In ME21N , click on "Personal Settings" , and select the check box "int search help on" .
Yes this works, but you have to tell that the user has to enter the text in the material number field, then SAP will search thru the database. -
How to get the row Count of a ResultSet
How to get the row Count of a ResultSet
Hi
I'v tried rennie1's way ,but I only get zero,my code is:
rs.executeQuery("select count(*) from t_test");
if (rs.next()) int rowCount=rs.getInt(1);
I also tried barni's way ,but the method rs.last() and rs.beforeFirst() throw a same Exception
I tried another way,the code is:
while rs.next(){
// Do nothing ,just move the cursour to the last row
int rowCount=rs.getRow()
However,the rowCount still equal zero
Any help would be greatly apprecite!
note:
I get connection by DataSource's JNDI name from client, the Server is Weblogic Server 6, the DBMS is Oracle. -
How to reduce the width of OVS view layout
Hi All,
In ESS-Bank Information-Bank Payee field we have a OVS View UI .Can any one please let me know how to reduce the width of OVI view layout (Search Screen)
Regards
AlexCheck this [thread|restrict input field size;
Hope this helps. -
How to reduce the size of a pdf?
How to reduce the size of a pdf?
Not do-able with Reader. Acrobat Pro can reduce PDF file size, but... if it's text only (no media or images) it won't reduce any more than it already is.
-
Web report for opening it takes long time how to reduce the time?
HI Experts,
I created report using webi. For next time while opening it takes more time. How to reduce the time.Hi Manikandan,
There could be multiple reason behind the bad performance.
1. Are you using supported JVM version to run Webi reports?
2. Do the reports contain prompts? Are the LOVs set to "Automatic refresh before use"? If yes, uncheck it.
3. How many queries do the report has? Can you run the queries one by one and check which query is taking much time?
4. If it based on relational database, copy and run it against the database directly and check how much time it takes. If more, you may have to fix the issue at database level like using temporary tables, indices, etc.
5. Also check if there are firewalls or proxy server between client and server communication. if yes, try to refresh the report directly on BO server and check.
6. Check if there is any hinderance between BO server and Database server communcation.
Hope it will help.
Regards,
Yuvraj -
How to reduce the coulmns width for Timesheet in ESS ?
Hi,
In ESS Timesheet, how to reduce the columns width for professional self service?
It is looking fine for weekdays, but when the user is assigned as professional self service at back end, few more sales order columns are added dynamically to timesheet for professional self service user. Now these extra coulmns are jumbled and also wide.
I tried the OSS notes 989453 in 'listviewerslim.java' , but it doesn't work. Is there any other alternative work around for this. Do I need to work at backend to solve this, If so, please let me know the work around.
Points will be awarded.
Regards,
Raj.Dear Friend
Really need ur help as we are upgrading from 4.7 to ECC6.
Our client want to implement tiem sheet. Request you to provide gudiance wheher CATS i.e CATSRegular orESS timesheet would be useful.
if would be great if u could provide a kind of advantages adn disadvantages of both.
Suitable points would be rewarded
Sam -
How to reduce the barcode size
hi
How to reduce the barcode size in smartforms
Thanks & Regards
krishna raoHai,
Go to se73
select system barcodes radi button
click change button
it wil moves to another screen .In that screen it wil show all Bar codes.
select u r barcode from the list click and change button.
in this way u wil change barcode size.
Reagards.
kishore ale -
How to reduce the database size based on MS SQL/Oracle?
Hi,
I had deleted severy clients via SCC5, but the database size is more and more bigger. Do you know how to reduce the database size.
my platform is: NT, MS SQL 2005
NT, Oracle 10.2
Best Regards,
Simon ShenHi Simon,
In the case of SQL you need to check how many space free you have in your datafiles and the based on that you need to Shrink them using DBCC SHRINKFILE command.
Find a couple of reference docs here,
http://www.intermedia.net/support/kb/default.asp?id=996
http://doc.ddart.net/mssql/sql70/dbcc_21.htm
Also i'm pretty sure that if your check the properties of the datafiles in MSSQL Enterprise Manager you get a "Shrink" option.
Regards
Juan
Please reward with points if helpful -
How to reduce the silence gap of ringtone made by Garageband
Garageband will add an extra silence (about 0.05 ~ 0.1 second) on the ending. The extra silence is automatically add on while garageband mixdown the track and send to iTunes.
Maybe Apple just made garageband to be so, just like the ringtone sold by iTunes store, it has at least a 0.5 sec gap. But that makes the ringtone won't be a perfect loop. So, I'd like to know how to reduce the extra silence that I don't want if there's a solution for this.you're right, it appears the behavior of the Cycle function has changed, it is very small, but it's enough to mess up looping.
you could cut off the excess with an audio editor:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
but being one of the few cellphoneless people in the world, I couldn't tell you how to get the edited file into the phone. perhaps someone in the iPhone forum can give you a tip for getting that final part done? -
Urgent HELP - How to reduce the number of entries in table MESYBODY?
Does anyone know how to reduce the number of records in synchronization table MESYBODY and MESYHEAD? The reason I wanted to reduce these tables is because I believe they have so many duplicated entries that causes extremely slow performance everytime we sync. Currently, there are almost 50,000 records for approximately 100 users, and I believe it shouldn't be that much.
We are running into a problem that it takes approximately 25-30 minutes to sync.
Any advices would be highly appreciated.
Regards,
DaiHi Dai,
please try to run the middleware job WAF_MW_MAPPING. For some applications (Mobile Time and Travel for example) this helps to clean the tables.
Br, alex
alexander ilg
http://www.msc-mobile.com -
How to reduce the the scrool bar size in the Portal screen
Hello,
We have recently migrated the EP from 7.0 to 7.3 and after the Upgreade we are facing issue in the Portal screen where the Scroll bar length in the Right Corner side is extended it's size.
Can any one please let me know where & how to reduce the the size of the scroll bar.
Since it's a new upgrade i am unable to get the exact parameter to change related to this Scroll bar Setting.
Kindly let me know.
With Regards,
PJ.It looks like a custom masthead on FAT? Debug the issue with the browser tools, adapt your source and re-deploy. Does this occurs also on SAP standard framework page?
regards -
How to reduce the posted depreciation
hi,
i need to reduce the depreciation for the fiscal year 2007-08. Assume that Depreciation amount was posted as Rs.12000.00 in the last fiscal year . Now i want to reduce only Rs.2000.00 in the same year. i.e 31.03.2008. how to reduce the depreciation?
Actaully if i need to increase depreciation, we are using unplanned depreciation option. like the way i want to reduce the depreciation.
govind.HI,
You can create a new transaction type which will ahve an impact on increasing asset values.
the t code to creat transaction type is AO78 and account assignment to be selected is DEBIT transaction instead of credit transaction.
regards
Meena Raghu
Maybe you are looking for
-
Inactive component cost not rolled up to top level item
Hi Our scenario is as follows: we have a top level item with a BOM. And some components of the BOM are having material status u2018inactiveu2019. Inactive means materials will not procured and sold, however we could have inventory which can be consu
-
Facing problem in iplanet pre populate adapter in OIM 11g r2
We have deafult iplanet prepop adapter as iPlanet PP String. the default fields, i.e First Name, Last Name, email is getting populated from user form to process form. But we have a number of other attributes as well whose values need to be pre popula
-
Reg: Bill Presentment Architecture
Hi all, I want to build sales invoice using BPA. How to accomplish this.. Weather i have to build query according to invoice.. Help me.. I am new to this.
-
Import of Raw defect after Update to 3.4.1
After Update to 3.4.1 the import function has an Error: When i do an import of Only RAW (.cr2) in the requester are shown some jpg´s after the first import. The sttings are the same.. normally him shows no more files because they are already in the l
-
Assertion failed deploy problems vs _WL_GENERATED
From time to time I notice deployment errors like ASSERTION FAILED caused by ClassNotFoundError on ...HomeImpl When I remove the WLGENERATED (which is in the ) and redeploy the EAR file, the deployment goes correctly. What is a possible reason for th