How to register Certificate with Connection Manager

I guess I can just have the user manually run the batch file after he extracts the zip file.

So I'm using the Connection Manager Administration Kit to deploy settings clients can use to setup the Windows VPN at their homes. I'm using a Certificate for the SSTP that I got from GoDaddy. So I was testing the Connection Manager package that I created on a laptop we have here and it turns out the GoDaddy intermediate certificate is not in the cert store.. so I'm assuming the same thing will be true for people at home.So in CMAK I added the cert file (the cert is a p7b file) And I made a Custom Action to run certutil -addstore CA .\cert.p7bBut that didn't add the cert.So then I made a batch file to create a folder C:\certvpn and copy the cert there and run certutil.The batch files creates the folder but doesn't copy the file. I guess my problem is the batch file isnt' running from the folder that its in, and I will never know what...
This topic first appeared in the Spiceworks Community

Similar Messages

How to register number with iMessage

How to register number with iMessage

Hi,
Thank you for the quick response. The sim card I have in the iPad is a standard "pay n go" sim card with a "data bolt on". If the sim card is placed into any phone, the sim card works as expected to make and receive calls etc.
I get what you mean about the iPad as I was a little disappointed by the lack of calling and/or messaging. Especially when their main competitors allow the use of SMS etc.
The issue I have is that iMessage, for some reason, shows the messages as being sent from the recieving mail address. So a iMessage being sent to [email protected] shows up on a.persons iPad as being sent from themselves. Although both iPads are linked to the same iTunes account, the address are different to the address used to set up iTunes. Hence the question regarding the sim cards number.
Still, no worries and thank you all the same for replying :)
With Thanks,
Dave G

Problem with Connection Manager. Can't change connection string / Server name

p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin-top:0cm;margin-right:0cm;margin-bottom:10.0pt;margin-left:0cm;line-height:115%;font-size:11.0pt;font-family:'Calibri','sans-serif';}
.MsoChpDefault
{font-size:10.0pt;}
.MsoPapDefault
{line-height:115%;}
@page Section1
{size:612.0pt 792.0pt;margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
Hi,
I have copied a number of SSID packages from a live server to my test server and am trying to get them up and running but I have a problem with the connection. The only thing that is different is the server name. I decided to keep the same connection in the connection manager as it is referenced in a dtsConfig file. I changed the dtsConfig file to reference the new servername [Data Source= new test server name]. I also check my paths and they are pointing to the correct config locations etc.
I found this post which was similar to my problem but I still get problems with the connection
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1319961&SiteID=1
I updated the connection by changing the server name in the actual connection. I did this from the data flow tab in the Connection Managers sections (MS Visual Studio). Right clicked - Edit - changed the name of the server name to my test server and selected the database. Test connection was fine, and saved this.
Once I saved this, the connection string changed to my current test server in the properties of the connection. However when I run the package I get the following error:
Error: 0xC0202009 at ReportsImport, Connection manager "myconnectionstring": SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Login timeout expired".
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Error: 0xC020801C at Myprocess import from file, BuyAtReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "myconnectionstring" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Myprocess import from file, DTS.Pipeline: component "ReportsImport" (79) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Myprocess import from file, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Myprocess import from file: There were errors during task validation.
So even if I change the existing connection properties and save and Build my package again, my connection properties (connectionstring, servername etc) all revert back to its original data source when I re-open the package. Simply it does not seem to be saving the connection properties i put in.
What am I doing wrong or how can I change the existing connection manager to look at the new server. The database is the same and I have full admin privilege on the server.
I don't want to recreate my packages as there are alot and they are not simple.
After changing the connection properties, saving and reloading I get a connection error. But this is because it is not retaining the new connection manger setting i entered.
Incidentally - I created a new SSID to perform a simple connection and write to the the server and it was OK so there is no problem with actually seeing the my test server.
Thanks in advance

Yes, the package is in visual studio and I have executed it. There are no errors but in the output i have the error message about my connection. My dtsConfig file is added to the project in the 'Package Configuration Organizer' and path and files are correct. This is the output error:
Error: 0xC020801C at xx import from file, xxReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I will try and run it using dtexec.exe. if I have two config files do i use
dtsexec.exe /f <packagename> /conf <configfile> /conf <secondconfigfile>

How to setup CCMS with Solution Manager

Hi, All
My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts
Is that RFC connection using both sites, trusted and satellite system ?
I would like to setup CCMS alerts through Solution manager and R/3 ccms
please anyone has some guide or URL or any idea send me
We are using SAP NW 2004 620 4.6C (SLD=DV,QA,PR) and solution manager 4.0
Thanks in advanced
J
Edited by: issue2008 on Sep 19, 2008 12:13 PM

you need to install CCMS agents(sapccm4x, sapccmsr) on satellite systems & configure them with the central system(solman).

How to remove files with package manager?

CanI remove file with package manager
For example if there is a file /apps/cq/ui/widgets/source/widgets/form/RichText.js in Author Instance A, then I delete RichText.js file using crxde. Then I create a package remove_richtextjs.zip with filter /apps/cq/ui/widgets/source/widgets/form/
Then I open another instance Author Instance B, there is an exact same file /apps/cq/ui/widgets/source/widgets/form/RichText.js. Is it possible that if I apply remove_richtextjs.zip, an RichText.js will be removed from Author Instance B?
Thanks

You don't have to pay to remove files. Just drag them to the Trash and Empty the Trash.

How to register itunes with out credit card? need help

i got mac but i don't have credit card what should i do to register with i tunes. can i link with paypal or debit card? need help cos i am new to mac thing cant use or download any stuff since my itunes account is not fully active

You can use an iTunes gift card to start an account. See the I do not have an iTunes Store account section of the How to redeem an iTunes Gift Card on a computer section of the following document:
iTunes Store: How to redeem an iTunes Gift Card

How to register automatically to solution manager "SMSY"

Hi,
I am quite new in the solution manager, Please advise how can i register my others sap system to the solution manager "SMSY" so i no need to key in manually the data.
is that any document / link regarding this ?
Thank you and Best Regards
Fernand Lesmana

how to create systems in smsy
https://websmp202.sap-ag.de/~sapidb/011000358700000894082006E.sim
New guded procedure for EHP1
https://websmp202.sap-ag.de/~sapidb/011000358700001927282008E
https://websmp202.sap-ag.de/~sapidb/011000358700000316542009E/Procedure_Configuration.exe
Hope it solves ur problem
Regards
Prakhar

How do i reinstall hp connection manager

I have a HP Pavilion g series and i need to know how to reinstall HP connection manager

Look in the Start Menu for HP Recovery Manager.Open it and use the option to 'Reinstall Applications and Drivers'.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How use ASR9001 DPI with Assurance Manager

Hi,
The ASR9001 has DPI features that allow it to detect and count how often URLs are hit. In addition the normal Netflow will account all traffic to/from ports 80 and 443. Question is how can we collect all this in Assurance Manager that is now part of Prime Infrastructure 1.2?
Any help welcome
Dirk

I do not know if anyone can confirm this , but I finally was able to assign the business scenarios from my business process structure to the solution with the source project.
(For those interested you have to go into transaction DSWP, Select Solution Landscape, go into Solution Landscape Maintenance, select your solution structure on the left side of the screen and get into business scenarios, make sure you are in change mode, then use the download under scenario name to select your scenarios).
When I create an issue and this is what I hope someone can confirm, go into context and add a business scenario, it doesn't show in SOLAR02 under the issues/messages tab.
This is somewhat inconsistent, as when I create an issue out of SOLAR02 it does assign the business scenario automatically and obviously will show in the list. I am not sure why it doesn't show when I create the issue out of DSWP.
Thanks
Paul

How do you deal with connection problems?

All of a sudden I'm having major connection problems with DW. I have checked my FTP settings against Yahoo's specs since that's who I host with and I've also talked to my ISP. Neither Yahoo nor my ISP can figure out what the problem is. To my knowledge I haven't changed any browser or firewall settings, but I'm having problems uploading pages to my site. I CAN connect to my site and it uploads a few pages, but then loses the connection and has to reconnect. It's also running REALLY slow, like dialup slow. I don't get any other error messages beside the fact that the connection has been lost. I did notice something in the FTP log that says No anonymous logins accepted. Is that a Yahoo thing, ISP problem or DW problem? If anybody knows how to fix this please let me know a.s.a.p. Thanks in advance for your help!

First, test out the FTP connection using a dedicated FTP client (FileZIlla/Transmit PC/Mac respectively). If you can connect and upload/download succesfully using a stand-alone FTP clieny, that means it's a Dreamweaver problem. Possible solutions: check your site settings, recreate your site by defining a new site - Dreamweaver sometimes messes up the site definitions and recreating the site definition can sometimes fix it. Or just give up on using Dreamweaver's FTP services. To be honest, Dreamweaver's FTP services have always been a bit iffy in my experience. I typically do my uploading using a seperate FTP client.

How to register user with developer rights in Netweaver 2004s

Dear all,
I have installed net 2004s on my laptop i want to use bw system in default client 001.
for that that i created a new user in 001 client
but that user is not registerd as developer .
can you suggest a way .
Regards,
gaurav.

Hi,
You have IDES version running,here some default user id and corresponding access key will be stored in table DEVACCESS.In real case there will be no entry initially.You have to get it from service marketplace as mentioned by Juan.When a developer will give the key that entry will be updated in the table DEVACCESS.
so I said try to see if any access key entry is there in table DEVACCESS.If so create a user id (from the table entry) and assign the key.
Regards
Ashok

How to install oracle connection manager on solaris 10

I have installed oracle application server 10.1.2 on solaris 10. How do i install oracle connection manager utility.
My end goal is to use applets/jdbc.
Thanks

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

HP connection manager not installed

I changed my OS and i installed all the driver of my model from hp forum but my wifi is not working and HP connection manager is not installed.

striker1994
Welcome to the HP Community Forum.
Your computer's Support Page:
HP Pavilion g6-2103tu Notebook PC
There is a copy of your original Connection Manager for Windows 7 listed on your computer's Support Page; see Category Software Solutions
=======================================================
If you have installed this version .NET Framework 3.5 SP1:
Microsoft .NET Framework 3.5
then
You might like to try the following newer version of the Connection Manager:
sp56984 HP Connection Manager V4.2.50.1
=======================================================
Additional Help
Connecting to a Network with Connection Manager 4.x
Notebooks - Setting Up a New Connection to a Wireless Local Area Network (Windows 7)
How to manually add a wireless network in Windows 7 and Vista
Notebooks - Setting Up a New Connection to a Wireless Local Area Network (Windows 7)
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Connection Manager & JDBC

I wrote an applet who connects to a database on a network where WebServer and Oracle Server were in the same host. Now I have to migrate the applet to a network where the Webserver and the database server are in diferent hosts. Because of security issues I can't make the connection to the database.
I know that the solution is using a signed applet or with connection manager. The problem is that I have no permision to configure the WebServer neither time or money for an applet certificate.
Is there any other way to access the database?

applet security rules can be annoying.
those are the only options.
setting up Oracle's connection manager on your web server platform is easier and quicker to do than signing the applet.

How to register Certificate with Connection Manager

Similar Messages

Maybe you are looking for