How to register in i message?

how to register phone number in i message in mac pro book?

I dont understand what you mean. But if your talking about syncing your iMessage from your iOS device then just enter your Apple-id

Similar Messages

  • Bug in file opening "SP2-0310: Unable to open file." How to register it ? ( Version 4.1.0.18)

    Steps to repeat in version 4.1.0.18
    1) mkdir sql
    2) cd sql
    3) touch script2.sql
    4) touch script1.sql        and  write  @@script2.sql
    5)  open the script1.sql from "Files" tree in sqldeveloper, choice connect to any oracle db , run script(F5)
    Error starting at line : 1 in command -
    @@script2.sql
    Error report -
    SP2-0310: Unable to open file: "script2.sql"
    If try to execute this  case in  version 4.0.3.16 then  all work will be fine.
    How to register it ?
    Message was edited by: DmitryZaytsev

    Hi!
    The SP2-0310 error occurs when you have not fully-qualified the PATH to the file.  Rather than rely on a variable, specify the fully-qualified path.
    HTH!

  • I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it say "! not delivered" in red mark.How can I fix this problem??

    I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??

    Perhaps something in this support article will help:
    http://support.apple.com/kb/TS2755
    Regards.

  • When you try to log into icoud message goes on this iphone activated limit the number of free accounts. What to do? How to register in icloud???

    When you try to log into icoud message goes on this iphone activated limit the number of free accounts. What to do?
    How to register in icloud???

    Thanks for the help!
    Unfortunately, the proposed option does not help you, as before when trying to check in icloud you see the same. Just not when you try to turn on Face Time the message "Waiting for activation" and all, Face Time icon on the desktop is not ...
    Please help!
    Thank you in advance!!

  • How to registered I message number

    Need to know how to registered the phone number for I message

    Sorry I don't understand your question.
    iPod doesn't have a phone number.
    Do you mean your friends' phone number?
    If your friends have iPhones then all you need to do is use their phone number in Contacts for iMessage.

  • How to register the recipient when create job by function

    I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
    Can you tell me how to register the recipient when create the job.
    ( in sm36, it is easily to do but how to do in coding? )
    regards,
    slam

    Hi
    I think in Back ground using the above fun modules you can't send a mail to the receipient.
    see the use of the above fun modules;
      IF p_bjob = 'X'.
        CONCATENATE sy-cprog sy-datum sy-uzeit
                    INTO jobname SEPARATED BY '_'.
        CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname          = jobname
          IMPORTING
            jobcount         = jobcount
          EXCEPTIONS
            cant_create_job  = 1
            invalid_job_data = 2
            jobname_missing  = 3
            OTHERS           = 4.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          IMPORTING
            out_archive_parameters = arc_params
            out_parameters         = print_params
            valid                  = valid
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF valid = chk.
          SUBMIT ybrep
                          WITH < sel Screen>
                          AND RETURN
                          USER               sy-uname
                          VIA JOB            jobname
                          NUMBER             jobcount
                          TO SAP-SPOOL
                          SPOOL PARAMETERS   print_params
                          ARCHIVE PARAMETERS arc_params
                          WITHOUT SPOOL DYNPRO.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              jobcount             = jobcount
              jobname              = jobname
              strtimmed            = 'X'
            EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              invalid_target       = 8
              OTHERS               = 9.
          IF sy-subrc <> 0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            MESSAGE i029 WITH jobname.
          ENDIF.
        ELSE.
          MESSAGE s000 WITH text-003.
          STOP.
        ENDIF.
      ENDIF.
    Reward points if useful
    Regards
    Anji

  • How to register multiple ipods on same email account

    how do register multiple ipods using the same email account?

    Maybe here
    How to use multiple iPods, iPads, or iPhones with one computer
    You can have an unlimited number of devices that you own or control for private use tied to one iTunes account. But you have only have five tied to one iCloud account.
    To alllow FT and Messagibng between them see:
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • How to register Lenovo B570 for warranty in the UK?

    Having bought a new B570 just before this new year (28th Dec 2011), I am still finding it impossible to register this laptop.
    After reading a message from someone that they had a crack appear on their B570's screen, I am very concerned - that I am yet unable to register my laptop properly.
    Apparantly there is a base warranty which starts from the manufacturing date for one year but we all are supposed to register and get this changed to last till one year from the date of our actual purchase.  But when I try to register on-line I get transfereed between various lenovo sites and finally the registration fails.
    Apparently my Lenovo B570 is called as Ideapad in the Singapore region and I get directed to that website - but I am in the UK and in the on-line registration form, I don't see any European nor USA - on the UK specific site there is no form where I can register for this 'my own warranty' rather than the 'base warranty' - in my case it turns out my laptop was manufactured a few months ago and the base warranty would not last for one full year after my purchase - this is not fair.
    I have been sending emails and so on - but not getting any positive response at all.
    How do I register for proper warranty please?

    hey vlbaindoor,
    i'm guessing that you bought the B570, from Singapore?
    Do note that in the International Warranty Page >> http://support.lenovo.com/en_US/product-service/iws.page?
    The B570 , did not list UK and therefore not eligible for International Warranty.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • How to Register as a Developer on SAP NetWeaver ABAP 7.02 Trial Version

    Hi Everyone,
    I was following a tutorial on ABAP and this centred on "Hello World" application. I got a message that I haven't been registered as a Developer on the system and that I need some code from OSS. I have tried checking here for any clues but it seemed none existed. Can't SAP be a bit more simplified like MS? It really requires lots of effort to get the right help and even at that, helps are not easily come by. I really which someone would point me in the right direction this time.
    Thank you.

    plz can u answer me to solve my problem... i download SAP Netweaver 7.02 and install it ...... when log on to SAP i can not make any think ..... SAP tell me You are not registered as a developer ... please register in the online service system (OSS). in the OSS you will receive an access key.
    i log on by
    DDIC and BCUSER
    and i have the same problem
    PLZ tell me how can registered my self as a developer on sap to get access key ..?

  • How to register adobe media encoder cs6

    Please anyone could explain to me how to register Adobe Media Encoder CS6. When I installed the new AP 10. I began to prepare my presentation and when I tried to import a video from my hard drive to a slide. It prompt a message Thanks for using AP 10. The product you have installed have not been registered yet. ....
    Thanks in advance

    El 25-08-2014, a las 2:05, Jay13 <[email protected]> escribió:
    How to register adobe media encoder cs6
    created by Jay13 in Adobe Presenter - View the full discussion
    Hi terapaca,
    Is your AP 10 licensed? if not can you please License it and then Check.
    If it is  licensed and still you are getting the same issue then please do the following.
    Please provide us with the Screen shot of the prompt and "oobelib.log" file.
    The location of "oobelib.log" is :-
    If you are using windows:
    C:\Users\<User name >\AppData\Local\Temp
    OR
    just open the run the window and type %TEMP%
    For Mac
    /Users/<user name>/Library/Logs
    Please provide the above files so that we can look into the issues soon.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6670470#6670470
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Presenter by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How to send a JMS message to a remote Queue?

    Hi,
    I know how to create a JMS message and send it to an MDB that listens to a topic in the same container in which the JMS is created.
    In other words, if I have the following MDB:
    @MessageDriven(mappedName = "jms/MyQueue", ...)
    public class MyMDB implements MessageListener {
    Elsewhere in my JEE app I can create a Queue like this:
    @Resource(mappedName = "jms/MyQueue")
    Queue queue;
    and use it to send a message to the MDB.
    But How can I send a message to an MDB that's deployed in another app server on another machine in the network? Both of the app servers are Glassfish.
    Thanks in advance.
    Edited by: EJP on 9/08/2011 21:49: fixed your meaningless title

    Hi,
    The first thing I would like to suggest is, we never/can't send message directly to MDB. We always send/receive message(s) to/from the destination. In case of MDB, the application server register the MDB as message listener against particular destination, and invoked the onMessage() method when message arrives on particular destination.
    If I am not wrong, what you want to achieve is asynchronous communication between two applications deployed in two different machine. In your case, you want your one application works as message producer and other act as an message consumer, and both are deployed in different machine.
    In this situations, you only need to configure the JMS administration object, connection factories and destinations, on one Application server and configure other application server to use those configuration using JMS resource adapter. you can well achieve this by configuring the JMS Resource Adapter. you need to check the Glassfish documentation.
    If you don't want to break the JMS specification, always communicate with Messaging Provider through Resource Adapter.
    I hope this helps.

  • How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

    During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error?  I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data?  If any one could help me that would be of great help.. Thanks

    Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

  • How to register DI RfcSvr as an Windows service

    Every time I must manully start DI RfcSvr program on windows. I want to know how to register it as a Windows service?
    I try to run below command:
    ntscmgr install SAPRFCService -b "D:\Business Objects\BusinessObjects Data Services\bin\rfcsvr.exe" -p "-a DI_SOURCE -g HOST_NAME -x gateway_name"
    It successfully register the command to NT service but It can not start. The error message in Event Manager is:
    Event ID 7009, Timeout (30000 milliseconds) waiting for the SAPRFCService service to connect. I though this is caused by no return code returned by program rfcsvr.exe.
    Anybody has good idea?
    TIA

    Hi,
    I'm in the same situation, I need to know if it's possible to record DI RFCSVR as a Windows service or not.
    When I try to start the service, I get the same error
    Event ID 7009, Time (30000 milliseconds) waiting for <name Service> of service to connect.
    I have searched without success guides.
    Any suggestions.

  • How to register jdbc Driver in Applet

    Dear Sir,
    i am running a applet through jsp
    i am using following softwares
    jakarta-tomcat-4.1.10
    mysql 3.23.52-max
    jsp
    j2sdk1.3.1
    Linux 7.3
    Netscape 4.*
    the problem is when i am trying to load the applet in jsp
    <jsp:plugin type="applet" code="XX" width="XX" height="XX">
    </jsp:plugin>
    it gives following message
    the page contains information of type
    (application/x-java-applet;jpi-version=1.4) that can we viewer with
    appropriate Plug-in , so i am using applet tag
    but it is running fine in browser if i give .html extension
    the other problem is , my normal jsp are running and getting connected to Mysql
    but when i use applet it is giving error ClassNot Found Error, i have included jar
    file mysql-connector-java-3.0.1-beta in my class path
    do i have to install the jar file on the client m/c as applet runs on client m/c
    how to register driver in Applet
    thank you
    sunil

    I'm not sure about the jsp page thing but to get your mysql working in the applete what you need to do is in the <Applete> tag where you have archive=myclass.jar add this to it archive="myclass.jar, mysql-connector-java-3.0.1-beta.jar"
    make sure the mysql...jar is in the same dir as your jar file and the database server is on the same machine. It won't let you connect from an applete to a database that's on a diffrent machine. You'll get an access denied error.
    For the jsp page try putting your class as the code="my.class" and add archive="same stuff to fix <Applete>"
    that might work.
    Hope I gave you enough info to get you on the right track.
    Matt S.

  • How to register someone on imessage

    How to register contacts on imessage

    I'm a owner of a 3rd gen iTouch, New iPad (3rd gen) and I got my wife for Christmas the 4th gen iTouch (5.1.1) It was a huge headache just to get a Apple ID for that. I inadvertantly managed to get my wife a iM Apple ID for icloud but got her a Apple ID for iTunes etc. (after a lot of work) 
    A colleague I lost contact with managed to set me up with Face time and iM on my iPad. I had to set my wife up  with a email on my other computer. After a lot of work I managed to get her a Apple ID and it works fine but not with iM.
    Question how do I get the Apple ID that does work within the apps store/iTunes, to work with iM. I've tried everything in the above but nothing seems to work. I get in Settings>Messeges: iMessage On, Send Read Receipt, On, Receive At: @icloud and I cant remember what the PW is for the iCloud one is.
    Oh I have 2 options: Remove this Email or resend validation Email and when I  try to resend I get a  dialogue box that pops up that reads iMessage Activation and it reads Unable to verify email (the Apple ID used in iTunes etc) because it is already in use.
    Also, I have an iOS upgrade pending but I'm affraid to activate it because we don't want to lose the YouTube that came with this license.
    Any ideas please?
    Thanks
    Message was edited by: envaneo

Maybe you are looking for