How to register job on local server  with oem

Hi All,
I scheduled cron for expdp on sun server(using telnet) and its going on successfully and i dont want to disturb it.
can i register this job with EM so that just view this job status thru oem-->job section.
Thanks

Dear User,
You can't attach the crontab job in OEM. AFAIK, or use the dbms_job or dbms_scheduler job to achieve the same.
Thanks
Regards,
Taj.

Similar Messages

  • How to register and unregister Mbean server when jvm is crashed.

    Hi All,
    how to register and unregister Mbean server when jvm is crashed with specifying like internal error(xxxxxxxxxxxsome number)
    I am getting error NameAlreadyBindExcetion when i call the below method in my program, how to unregister and register again, can any one can help on this topic?
    internalConnectorService.start();
    regards
    Prasad.Nadendla

    Looks like your server object is already bound and registered and your trying to re-register the same...
    is that a corba server? if yes, you'd be able to check that with the NamingService tools

  • How to use the same OC4j server with different port number

    How to use the same OC4j server with different port numbers..?
    I have to OC4J installed on my machine on different hard disk drives....
    I want to be able to run both the server simultaneously..?
    is it possible ..it yes then how..?
    for that i have changed the port number of one server...
    but when i am trying to start the other server with different port number..it says that JVM -Bind already...
    Is there any clues...?
    Nilesh G

    In the config directory:
    default-web-site.xml: Change the port the HTTP listener listens on
    jms.xml: Change the port the JMS service listens on
    rmi.xml: Change the port the ORMI listener listens on.
    Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
    Rob
    Oracle

  • I want to know how to register a preowned CS5.5 with ADOBE and activate it?

    I want to know how to register a preowned CS5.5 with ADOBE and activate it?

    Transfer an Adobe product license
    Mylenium

  • How register user defined listener name with OEM

    DEFAULT LISTENER
    [oracle@localhost ~]$ lsnrctl status
    LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 06-SEP-2010 10:03:46
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    USER DEFINED LISTENER
    [oracle@localhost ~]$ lsnrctl status LISTENER_LIMCAMP
    LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 06-SEP-2010 10:04:03
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.106.72)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER_LIMCAMP
    Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
    Start Date 03-SEP-2010 19:42:11
    Uptime 2 days 14 hr. 21 min. 52 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /ora10gsoft/oracle/product/10.2.0/db_1/network/log/listener_limcamp.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.106.72)(PORT=1521)))
    Services Summary...
    Service "LIMCAMP" has 1 instance(s).
    Instance "LIMCAMP", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    I am able to connected thru listener.
    But my OEM database control showing
    Host localhost.localdomain
    Port 1521
    SID LIMCAMP
    Oracle Home /ora10gsoft/oracle/product/10.2.0/db_1
    Status Down
    Host localhost.localdomain
    Port 1521
    Name LISTENER
    Oracle Home /ora10gsoft/oracle/product/10.2.0/db_1
    Location /ora10gsoft/oracle/product/10.2.0/db_1/network/admin
    Details TNS-12541: TNS:no listener
    My OEM taking the default LISTENER( which is not running). how to register OEM to take the listener (LISTENER_LIMCAMP).

    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1 localhost.localdomain
    192.168.106.72 localhost.localdomain
    would you please have a look into the below link which is the issue on the same server.
    Heartbeat failed to connect to standby : archive files not transfering....
    Edited by: SAKTHIVEL on Sep 6, 2010 11:45 AM

  • How to get standalone Oracle HTTP Server with mod_plsql?

    Hi,
    I do not know if it is just me but it seems to be a nightmare to get OHS with mod_plsql from the official OTN download site. I downoaded the companion CD for Windows - 3 disks, installed OHS - no mod_plsql. Then I tried to find any clue on OTN on how to download mod_plsql - none. Plenty of information on how to configure it and use it, but nothing on how to get it.
    PLSQL gateways is not an option for us because many of our clients do not allow direct communication between the database and the Internet.
    Windows 2003 Server R2
    Apex 3.2.1
    RDBMS 10.2.0.4
    Any help appreciated,
    WK
    PS.
    I would not like to download the software from unofficial sites but rather get it straight from Oracle.

    Hi,
    For those interested: I found Oracle HTTP Server with mod_plsql on OTN -> downloads -> middleware -> WebCenter suite.
    WK

  • How to register VSPackage into SQL Server Management Studio?

    Hi All,
    I am a newer to VSPackage, I want to create a VSPackage for SQL Server Management Studio(SSMS), now I can create a VSPackage project and debug it in Visual Studio but don't know how to debug it in SQL Server Management Studio and how to deploy VSPackage to
    SSMS by MSI? Thanks

    By the way I find a extension.vsixmanifest file and some .pkgdef files under
    C:\Program Files\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\Extensions\  folder, and they are very similar with VSPackage files. Do know this is useful or not.
    Hi Vic Zhang,
    After some research, There are some notes. SQL Server Management Studio is built upon the Visual Studio Isolated Shell, which inherently supports extensibility (add-ins/plug-ins). It is possible to tap into the Visual Studio extensibility services to surface
    custom capabilities within SQL Server Management Studio; however, we do not discourage this, keep in mind that such extensibility is not supported, so there may be issues with backward/forward compatibility. Microsoft does not publish documentation for extending
    SQL Server Management Studio.
    If you want to debug VSPackeage about SSMS, I recommend you debug in Visual Studio and not in SSMS, open the project and attach to the process of SSMS.exe, then debug it.
    About the issue of finding the “RootKey”, a .pkgdef file is way to encapsulate application configuration information in an easily editable, distributable, and deployable form. And it registers the Extension Manager (which is written as a VS Package). If
    you install SQL Server 2012, the .pkgdef of SSMS is located in the following path, you can check the “RootKey” in this .pkgdef file.
    C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio
    There is detail about a PkgDef, you can review the following article.
    http://blogs.msdn.com/b/visualstudio/archive/2009/12/18/what-s-a-pkgdef-and-why.aspx
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • How to active 2012 RDS & domain server with one license

    I install Windows server 2012 for using remote apps on the virtual machine, and it require  installing the domain server to create the remote apps. Now I want to know how can I active both server with one license?
    Wayne Xuan

    those maybe helpful?
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b8163381-7a9c-42e8-9a16-8aa06bc976ba/rds-licensing?forum=winserverTS
    http://www.microsoft.com/licensing/Default.aspx
    Best,
    Howtodo

  • How to connect Crystal Report 2008 server with SAP BI/BW server

    Hi ,
    I have downloaded the 60 Days trial version of  "Crystal Report 2008 Server' from sap site to my machine. Now i would like to connect this Crystal server with SAP BI and want to use the data of BI Bex queries and Infoproviders.
    Can you please guide me how to connect them?
    Aslo how can i get the free trial version of Intergration kit ..here please provide me the entire full path of site(to download the Integration Kit).....
    Any inputs would be appreciated!!
    Regards,
    Naween

    Hi Michelle,
    Older versions of CR would allow you to run CR from a network share point but you still had to have a license for each user. Current versions of CR do not allow you to do this any more, possibly using a Citrix or Terminal Server would allow this but you still need a license for each user. Older versions had a Network install option.
    And as suggested exporting to PDF or some other format is fine for end users viewing your output. They are not using CR but Adobe Reader or Word etc. to view the reports, they just can't use the Designer to view the reports.
    Hope this is clear now?
    Thank you
    Don

  • How to set up a mail server with a private DNS and relay over a public mail

    How to set up the mail server that we can send and pick up emails inside and outside?
    Our private network has the DNS name dnsname1.private.
    We have our privat DNS Server and he can forward requests to outside over our router.
    Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
    How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
    And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?

    If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
    Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
    You have a static public IP?

  • HOW DO I OPEN A LOCAL WEBPAGE WITH LINKS TO IPAD2?

    I am very new to the iPAd and this forum, so please excuse if this sound like s silly query!
    I am a musician and would like to use my iPad2 on stage to display my lyrics sheets and scores (chords).
    So what I have done before is to setup a local webpage index with hyperlinks to all the lyrics and scores in htm/l format. Theis was done on my desktop PC and copied across to my stage laptop. When I used my laptop on stage I could open the main index webpage in the browser and just click on any link which would then obviously also open in the browser. To return to the index you just click on the back arrow to load the next required page.
    How do I transfer this webpage and subsequent links to the iPad via iTunes, and then open it in Safari?
    I appreciate your help.

    You could create an offline web application by creating an HTML manifest file, referencing it from your main web page, and then listing all the other resources loaded by the main page.  Saving this page to the home screen via the "Action" button in Safari would then cache all of the resources and let you access it offline (e.g., in Airplane mode).
    The challenge of creating offline web apps is that the main web page may only be loaded once, and the other web "pages" need to be loaded by XMLHttpRequest (XHR), or you could put all content in a single HTML page, and hide/show the content by modifying CSS properties.  The main web page may not be replaced by another web page (e.g., when tapping on a link), otherwise the web app will open the new page in Safari.
    Note that to initially set up this web app, you'll have to serve it from a local web server on your Mac or PC.  On OS X, you may use Web Sharing from the System Preferences > Sharing pref pane.  You can put the files in the "Sites" directory in the home directory on your Mac, and you can access the web pages from your iPad if your Mac and iPad are on the same local network.
    More information here, although there are probably tutorials if you search Google for them:
    https://developer.apple.com/library/safari/#documentation/iPhone/Conceptual/Safa riJSDatabaseGuide/Introduction/Introduction.html
    http://www.w3.org/TR/html5/offline.html
    I know there is a lot of technical information here, but I hope that helps.  It is possible to do what you want to do, although it's not simple.

  • How to register EJBs to JMX Server?

    When I register a SessionBean in the ejbCreate()- method like this:
    ObjectName name = ObjectNameFactory.getNameForServerChildPerNode("SAP_MyMBean", "MyBean", null, null);
    mbs.registerMBean(this, name);
    I get an InvocationTargetException by calling any other method.
    How can I register an SessionBean to the JMX-Server?

    Looks like your server object is already bound and registered and your trying to re-register the same...
    is that a corba server? if yes, you'd be able to check that with the NamingService tools

  • How do I bind to directory server with SSL and authentication?

    I'm running Lion Server 10.7.3, Open Directory master. In Open Directory/Settings/LDAP, I've checked the box to Enable SSL and selected a (self-signed) certificate. In Policies/Binding, I've checked the box to Enable Authenticated Directory Binding.
    Testing with a client computer on which Snow Leopard has been freshly installed and fully updated, I went to System Prefs/Accounts to bind to the new directory server. The good news is, the binding was successful, and when the client initiates an AFP connection with the server, it uses Kerberos, creating a ticket as expected. (Which doesn't work with Lion clients, alas, but that's a seperate matter.)
    Here are the problems:
    1) It looks like the binding did not use SSL. By which I mean that when I opened Directory Utility and examined the LDAPv3 entry, the SSL checkbox was not checked. (If I then check the box, everything looks fine until I restart the client, after which I have a red dot. So I'm guessing that checking the box does nothing until after restart, and that it breaks the binding.)
    2) I was never prompted to authenticate for the directory binding.
    So I get that literally I'm *enabling* SSL and Authenticated Directory Binding, but it seems like the defaults are to bind without SSL or authentication, and there's no obvious-to-me way to force the binding to use those things. How do I do that?
    What I'd really like to do is *require* SSL and Authenticated Directory Binding. I want this because my belief (correct me if I'm wrong) is that if authentication is required to bind to the server, no one will be able to bind to my server without my permission, and that SSL offers a more secure connection to my server than not-SSL. How do I require these things, or do I not really want to?
    Thank you.

    You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
    Cheers,
    Vikas

  • How can I setup a web server with 200 web site

    Dear all,
    I am going to get a PowerMac X 10.5.8 and I would like to use it to setup a web server to host 200 account.
    However it is a chalenge because I never did a such work with mac and I would like to have some advice from us and particularely about that:
    * Bandwidth (What should take care with my Phone line provider)
    * Is there a web platform I should provide to my client, to let them to manage MySQL, FTP account, manage file as PLESK does
    * How should it set up my mac server to make it as a performent web server
    * Do you have some other recommandation, procedure
    The Mac server I might received have
    12G RAm
    2,8 Hrz (quad)
    RADI1 (260G) I am going to extend it
    many thank for you recommandation and advice

    This is a System Center Configuration Manager 2007 forum. You should post your question in a Windows forum although to my knowledge, there is nothing built-in to Windows to provide this capability and you will have to implement a third-party solution.
    Jason | http://blog.configmgrftw.com

  • How to register/configure a Data Provider with Crystal Report Designer

    Hi,
    Iu2019m in the process of developing an ADO .Net XML Data Provider which works with Data Sets. I want to use this custom Data Provider through Crystal Report Designer 2008 so that I can access it from the u201CStandard Report Creation Wizard\Available Data Sourcesu201D section. How can I do this? I read the following in the u201Ccreating custom adddins.docu201D documentation.
    u201CCrystal Reports (CR) 2008 installs a new managed dll called DotNetExternalCommandAdapter.DLL and installs it into the Global Assembly Cache (GAC).  CR 2008 uses this dll to search and load files with a csc prefix in CR 2008u2019s AddIns subdirectory in a similar way it looks for database drivers, export drivers and UFLs. To create an Add-In the developer needs to reference this dll and inherit two classes from it, ICommand and ICommandDLL.u201D
    I have the following questions,
    1) As it mentions above how can I make Crystal find my custom Data Provider when it searches for the database drivers?
    2) Is there another class I can inherit from when creating my custom data provider? If so where can I find some documentation regarding this?
    3) Can I register my custom data provider in to the GAC and will Crystal find it if so how can I register my custom Data Provider? Will GACUtil work for Crystal as well?
    Thanks in Advance,
    Regards,
    Chanaka

    Baron, thank you for providing that link.
    Chanaka see if that article helps you out. It should - had I got to this thread earlier, I'd have sent that link also. Certainly DE place to start.
    Ludek

Maybe you are looking for