How to remove a message from a Topic before it's consumed?
Hi All,
I'm using Weblogic JMS Extensions to publish messages to a topic so
that consumers do not receive them for at least 1 hour after
publishing. My problem is that I need to be able to delete selected
messages from the topic sometimes before the consumers see it. I've
looked everywhere but can't see a simple way of achieving this. Have I
missed the obvious? (I hope I have!).
Many thanks in advance.
Essentially, the messages do not exist until that hour. There is
currently no way to consume them.
_sjz.
"jim" <[email protected]> wrote in message
news:[email protected]..
> Hi All,
>
> I'm using Weblogic JMS Extensions to publish messages to a topic so
> that consumers do not receive them for at least 1 hour after
> publishing. My problem is that I need to be able to delete selected
> messages from the topic sometimes before the consumers see it. I've
> looked everywhere but can't see a simple way of achieving this. Have I
> missed the obvious? (I hope I have!).
>
> Many thanks in advance.
Similar Messages
-
How to remove duplicate messages from Mail in Mavericks (POP)
Hello
I'm having some significant problems with Apple Mail, and despite having researched widely, I haven't been able to find a solution yet. Here is my tale of woe...
My set up is that I use Mail with 5 separate accounts, downloading all messages using POP. I keep all my mail so that I have a permanent record of all conversations, going back more than 10 years - this is about 250,000 emails. I'm running the latest version of Mavericks on a 2010 MBP. I have no intention of moving to IMAP - I need to keep a local archive of all my mail.
A few months ago I was having problems with Mail being very slow to load and search emails. I decided to rebuild the mailboxes, but afterwards discovered that thousands of messages in the inbox of one of my accounts (and some of the sub-folders) had disappeared. Once I realised I tried to go back to a recent Time Machine back up, but, for whatever reason, that part of the back up hadn't worked properly and I was unable to recover the previous status. Ileft it while I decided what to do, and had time to deal with it.
The last 2 years worth of emails on that account were still archived on gmail, so last week I decided to try redownloading the whole lot (something like 72,000 messages), and then uplanned to use one of the scripts I was aware of to remove the duplicates to the trash, and then remove any duplicates in the trash forever. That ought to mean I at least had an archive of the last two years of missing messages, even if I had no record of which ones had been flagged or replied to, etc.
The downloading took about 24 hours to complete, and I now have almost 70,000 messages in the inbox of that account. However, I hadn't figured on two things:
1. Mail 'hides' duplicate messages, meaning that all of the messages I've downloaded are showing as unread, and I can't differentiate the ones I already had in my Inbox, and the new downloads. When I click on those apparently unread messages I can see if they have been replied to or forwarded, etc, but there's no obvious way for me to remove the ones I have already dealt with to the trash, without going through them all manually, which is clearly impossible.
2. The scripts I'd found for removing duplicates don't work. Andreas Amann's Remove Duplicates script doesn't work under Mavericks, and he has abandoned the project. I've also tried the remove-duplicate-messages.scpt made by Jolly Roger (http://jollyroger.kicks-***.org/software/), and while it *sometimes* works on individual subfolders on my Mac (but as far as I can tell removes the duplicate in that folder, rather than the newly downloaded version), mostly it doesn't work at all - it creates a 'Remove Duplicate Messages' folder on my desktop, a log inside it and a folder for removed messages, but nothing appears in the duplicates folder.
So, I'm left in a position where I have 70,000 apparently unread messages in my Inbox, a massively bloated Mail library (which has pretty much doubled in size), a slow and unresponsive Mail program. I figure I have a number of options. Either I could abandon the last week's efforts and revert to the version ofApologies, this was posted here in error. Please find updated post here: https://discussions.apple.com/message/27261965#27261965
-
How to remove a message from a thread...
I would much rather have it, that mail.app could figure out how to thread my messages correctly, but for some reason, when the subject is the same, it always thinks it is the same thread (I have a zillion mails with the subject "meeting"!)
Is there any way to simply, (manually?) select some message, and tell mail.app that those messages should not be an that thread??You can always go to View and uncheck Organize By Thread, but that will apply to all messages. I don't know of any way to do it on a per-message basis.
The only solution I can think of is to ask your colleagues to quit using stupid subjects like "meeting" and to put something more descriptive in there (like "meeting with John Smith" or "meeting on 11/20")! -
How to remove XML messages from Integration Engine
Hi,
i had created file - XI -file scenario activated it and check messages using tcode SXMB_MONI .Error messages coming after every minute as i set polling intervals to 60 seconds .Now i had deleted related objects from IR and ID but still XML messages coming in ....please anyone can help to stop this scenario anyhow.Dear Jai ,
i had checked everything before this and even i have checked now and i had created that scenaio by my own userid and passwd. Checked sender interface, reciever interface in SXMB_MONI it's the same which i had given name to them . Even we people are surprised that after deleting all the things in IR and ID . i don't know exactly why it is coming but what i am guessing is that after activating the scenarios it might get executed from XI runtime cache and there is no dependency on IR and ID objects . so what i had done that i completely refreshed the XI Runtime Cache by using tcode SXI_CACHE but it's still not working that way also.
Message was edited by:
ashwin dhakne
Message was edited by:
ashwin dhakne -
Remove faces messages from context
Hi,
I am using below code to remove messages from context.
But unable to remove messages.
Please any one help me how to remove faces messages from context.
Iterator iterator = FacesContext.getCurrentInstance().getMessages();
while (iterator.hasNext()) {
iterator.remove();
}Thanks,
sivareddy
Edited by: sweetreddy2001 on Aug 26, 2009 6:56 PMCheck the topic right below yours in the topic listing. The same question was asked and answered some hours ago.
-
How to retreive all unconsumed messages from a topic with a MDB?
Hello!
I have a webapp that stores TextMessages in a Topic in WebLogic.
I have an ejbapp (Message driven bean) that reads messages from the topic.
If both are up and running the ejbapp reads all messages sent from the webapp to the topic.
But if I stop the ejbapp for a while and sends a couple of messages to the topic and then deploy the ejbapp again, then the ejbapp does not read the unconsumed messages. If I send a new message to the topic the ejbapp reads that new messages but it does not get the previous messages that are on the topic.
Is this the way it should work? Or could I get the message driven bean to consume all the messages that it has not consumed from the topic when it starts?
My weblogic-ejb-jar.xml looks like:
<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN' 'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>OrderManagerMDB</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>200</max-beans-in-free-pool>
<initial-beans-in-free-pool>20</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>jms/OrdersTopic</destination-jndi-name>
<connection-factory-jndi-name>jms/OrdersConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>And my ejb-jar.xml looks like:
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<enterprise-beans>
<message-driven>
<ejb-name>OrderManagerMDB</ejb-name>
<ejb-class>brownbagwarehouse.OrderManagerMDB</ejb-class>
<transaction-type>Container</transaction-type>
<acknowledge-mode>Auto-acknowledge</acknowledge-mode>
<message-driven-destination>
<destination-type>javax.jms.Topic</destination-type>
</message-driven-destination>
</message-driven>
</enterprise-beans>
</ejb-jar>My MDB onMessage looks like:
public void onMessage(Message message)
try
TextMessage textMessage = (TextMessage)message;
System.out.println(textMessage.getText());
catch(Exception e)
e.printStackTrace();
}Best regards
FredrikI am not much familiar with Weblogic, but i would suggest, you do a search for how to setup "Durable Subscriptions" in Weblogic. This will ensure the the messages that were sent when the consumer was not available, will be delivered once the consumer is available
-
How to retrive all unread messages from a topic?
Hello!
I have a webapp that stores TextMessages in a Topic in WebLogic.
I have an ejbapp (Message driven bean) that reads messages from the topic.
If both are up and running the ejbapp reads all messages sent from the webapp to the topic.
But if I stop the ejbapp for a while and sends a couple of messages to the topic and then deploy the ejbapp again, then the ejbapp does not read the unconsumed messages. If I send a new message to the topic the ejbapp reads that new messages but it does not get the previous messages that are on the topic.
Is this the way it should work? Or could I get the message driven bean to consume all the messages that it has not consumed from the topic when it starts?
My weblogic-ejb-jar.xml looks like:
<pre><!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN' 'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>OrderManagerMDB</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>200</max-beans-in-free-pool>
<initial-beans-in-free-pool>20</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>jms/OrdersTopic</destination-jndi-name>
<connection-factory-jndi-name>jms/OrdersConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
</weblogic-enterprise-bean>
</weblogic-ejb-jar></pre>
And my ejb-jar.xml looks like:
<pre><!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<enterprise-beans>
<message-driven>
<ejb-name>OrderManagerMDB</ejb-name>
<ejb-class>brownbagwarehouse.OrderManagerMDB</ejb-class>
<transaction-type>Container</transaction-type>
<acknowledge-mode>Auto-acknowledge</acknowledge-mode>
<message-driven-destination>
<destination-type>javax.jms.Topic</destination-type>
</message-driven-destination>
</message-driven>
</enterprise-beans>
</ejb-jar></pre>
My MDB onMessage looks like:
<pre>public void onMessage(Message message)
try
TextMessage textMessage = (TextMessage)message;
System.out.println(textMessage.getText());
catch(Exception e)
e.printStackTrace();
</pre>
Best regards
FredrikFor subscriptions to continue to exist even while no subscriber is attached they need to be "durable". See the EJB programmer's guide, and search for "durable" in the MDB doc.
In JMS terminology these are termed "durable subscriptions".
Tom -
How do i remove recovered messages from my email
I need help removing recovered messages from my email.
I posted a very similar question. The answers I received here did not help. For anyone else looking, here is the solution that finally worked. My son found it via a Goolge search:
Best answer - Sarah (Google Employee) Go to this answer
chessop
Please follow below steps.
1.Take your gmail account offline from Mail and delete the recovered messages folder.
2. Download the widget to show the hidden files fromhttp://www.apple.com/downloads/dashboard/developer/hiddenfiles.html
3. Go to UserName/Library/Mail/IMAP-<username>@[email protected]/.OfflineCache
4. Delete all the data under .OfflineCache folder - DO NOT DELETE the folder.
5. Close Mail application and reopen.
This should do the job.
Best regards,
Aadi
338 of 359 people found this answer helpful. Did you? Sign in to vote. Report abuse
See the answer in context -
How to remove a node from nlb at runtime?
hello,
i need to temporally exclude a node from an nlb.
May happen that a server is up and working but the web application i'm balancing is out of sinch with the same application in the others nodes.
Eg. some static variables are not the same of the same static variables of other nodes, because of a timeout, a write error and so on but the server is still working.
in this case i need to stop the server from nlb because the information in the web application is not in sinch with other nodes.
I need to prevent users from being serverd from this out to date server, untill it will became updated, but i need to do this programmatically
how can i do it?"DuoMi" <[email protected]> wrote in message
news:gnojbf$2sg$[email protected]..
> How to remove a node from XMLList
>
> I want remove the first node from XMLList
>
>
> and how to get the combobox all values string:
>
> <data>
> <value>2</value>
> </date>
> <data>
> <value>5</value>
> </date>
> <data>
> <value>8</value>
> </date>
>
> I need a string whit value "2,5,8"
>
> thkan you.~
I think something like
comboBox.dataProvider..value.toString()
will work. -
Jms adapter not polling messages from jms topic
Hi
We have a jms adapter configured in BPEL process which need to poll messages from JMS topic.Unfortunately its not polling message from JMS Topic if we add Message Selector and Durable Subscriber properties in jca file.Please find jca file content below
<adapter-config name="SyncCustomerPartyListCDHJMSConsumer" adapter="JMS Adapter" wsdlLocation="oramds:/apps/AIAMetaData/AIAComponents/ApplicationConnectorServiceLibrary/CDH/V1/ProviderABCS/SyncCustomerPartyListCDHProvABCSImpl.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/jms/aia/syncCustomerParty_cf" UIJmsProvider="WLSJMS" UIConnectionName="Dev"/>
<endpoint-activation portType="Consume_Message_ptt" operation="Consume_Message">
<activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec">
<!--property name="DurableSubscriber" value="XYZ"/-->
<property name="PayloadType" value="TextMessage"/>
<!--property name="MessageSelector" value="Target in ('XYZ')"/-->
<property name="UseMessageListener" value="true"/>
<property name="DestinationName" value="jms/aia/Topic.jms.COMMON.CustomerParty.PUBLISH"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
If we remove Durable subscriber and message selector properties,its able to poll messages.
Any pointer will help
thanks in advance
BajiAfter changing below property in jca file.JMS adapter is able to poll messages from JMS Topic.
<property name="UseMessageListener" value="false"/>
But if i un comment below line and deploy my code again, it stop pulling the messages from topic.
<property name="DurableSubscriber" value="XYZ"/>
If i bounce the server after above change and deployment ,it will start polling the message.I am not sure why i need to restart my server after adding above property.
Thanks
Baji -
How to remove a meter from an installation after move-out
Hi,
Could anyone please tell me how to remove a meter from an installation after move-out and if the installation was blocked before move-out.
I was trying to remove the meter from an installation which was blocked before move-out. And if i remove the blocking after move-out, it is still giving me this message that the installation is blocked.
Thanks in advance.
MahavirDear Birendra,
You can NEVER remove a Device (for Billing Related or FULL removal), since you need to save a Removal read while doing the removal. Hence, you can not create a MR ( Reason 01/02/03/06/16/17/21/22), without a Active contract. This is a Basic Metering Rule.
You will have to do the removal on the same day of the Move out.
Any additional questions?
KR,
AAL! -
How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?
"adrianTNT" <[email protected]> wrote in message
news:e6aitv$hkm$[email protected]..
>
quote:
Originally posted by:
kglad
> you're welcome. with your solution loading another mp3,
are you sure it stops
> the download of the first mp3?
> Yes, it seems to work fine, it loads another sound in
same sound (my_sound)
> and it seems to replace loaded progress with the empty
sound I gave and stops
> previous loading.
> I look at traffic icons on task bar and I see that there
is no network traffic
> after I click "stop" before this I could see continuous
traffic while sound was
> loading in background.
Yeah, I remember someone posted that solution a long time
ago. It seems if you load a file with the same name the cache
doesn't
know any better and adjusts the download size to the smaller
one. Maybe it's a good way to do it! Could it be a way to remove an
mp3 from someone's cache after it plays? hmmmm Will have to
do more testing.
tralfaz -
How to remove a node from XMLList
How to remove a node from XMLList
I want remove the first node from XMLList
and how to get the combobox all values string:
<data>
<value>2</value>
</date>
<data>
<value>5</value>
</date>
<data>
<value>8</value>
</date>
I need a string whit value "2,5,8"
thkan you.~"DuoMi" <[email protected]> wrote in message
news:gnojbf$2sg$[email protected]..
> How to remove a node from XMLList
>
> I want remove the first node from XMLList
>
>
> and how to get the combobox all values string:
>
> <data>
> <value>2</value>
> </date>
> <data>
> <value>5</value>
> </date>
> <data>
> <value>8</value>
> </date>
>
> I need a string whit value "2,5,8"
>
> thkan you.~
I think something like
comboBox.dataProvider..value.toString()
will work. -
How to remove duplicates records from output ?
how to remove duplicates records from output ? i used delete adjacent but duplicates records are coming again ..suggest me
hi shruthi,
thanks for ur answer ..but duplicates records coming again
here is my code >> plz check it out
*& Report ZCRM_TROUBLE_TICKET
REPORT zcrm_trouble_ticket.
TYPES : BEGIN OF ty_qmih,
qmnum TYPE qmnum,
equnr TYPE equnr,
iloan TYPE iloan,
ausvn TYPE ausvn,
ausbs TYPE ausbs,
auztv TYPE auztv,
auztb TYPE auztb,
iwerk TYPE iwerk,
END OF ty_qmih,
BEGIN OF ty_qmel,
qmnum TYPE qmnum,
qmtxt TYPE qmtxt,
indtx TYPE indltx,
priok TYPE priok,
strmn TYPE strmn,
strur TYPE strur,
ltrmn TYPE ltrmn,
ltrur TYPE ltrur,
objnr TYPE qmobjnr,
arbpl TYPE lgwid,
vkorg TYPE vkorg,
vtweg TYPE vtweg,
spart TYPE spart,
END OF ty_qmel,
BEGIN OF ty_ihpa,
parnr TYPE i_parnr,
parvw TYPE parvw,
objnr TYPE qmobjnr,
END OF ty_ihpa,
BEGIN OF ty_crhd,
arbpl TYPE arbpl,
objid TYPE cr_objid,
END OF ty_crhd,
BEGIN OF ty_crtx,
ktext TYPE cr_ktext,
objid TYPE cr_objid,
END OF ty_crtx,
BEGIN OF ty_qmfe,
fecod TYPE fecod,
fegrp TYPE fegrp,
qmnum TYPE qmnum,
END OF ty_qmfe,
BEGIN OF ty_qmur,
urcod TYPE urcod,
urgrp TYPE urgrp,
urtxt TYPE urstx,
qmnum TYPE qmnum,
END OF ty_qmur,
BEGIN OF ty_iloa,
tplnr TYPE tplnr,
iloan TYPE iloan,
END OF ty_iloa,
BEGIN OF ty_output,
qmnum TYPE qmnum,
equnr TYPE equnr,
iloan TYPE iloan,
ausvn TYPE ausvn,
ausbs TYPE ausbs,
auztv TYPE auztv,
auztb TYPE auztb,
iwerk TYPE iwerk,
qmtxt TYPE qmtxt,
indtx TYPE indltx,
priok TYPE priok,
strmn TYPE strmn,
strur TYPE strur,
ltrmn TYPE ltrmn,
ltrur TYPE ltrur,
objnr TYPE qmobjnr,
arbpl TYPE lgwid,
vkorg TYPE vkorg,
vtweg TYPE vtweg,
spart TYPE spart,
parnr TYPE i_parnr,
parvw TYPE parvw,
arbpl TYPE arbpl,
objid TYPE cr_objid,
arbpl1 TYPE arbpl,
ktext TYPE cr_ktext,
fecod TYPE fecod,
fegrp TYPE fegrp,
urcod TYPE urcod,
urgrp TYPE urgrp,
urtxt TYPE urstx,
tplnr TYPE tplnr,
END OF ty_output.
DATA : it_qmih TYPE STANDARD TABLE OF ty_qmih,
it_qmel TYPE STANDARD TABLE OF ty_qmel,
it_ihpa TYPE STANDARD TABLE OF ty_ihpa,
it_crhd TYPE STANDARD TABLE OF ty_crhd,
it_crtx TYPE STANDARD TABLE OF ty_crtx,
it_qmfe TYPE STANDARD TABLE OF ty_qmfe,
it_qmur TYPE STANDARD TABLE OF ty_qmur,
it_iloa TYPE STANDARD TABLE OF ty_iloa,
it_output TYPE STANDARD TABLE OF ty_output,
wa_qmih TYPE ty_qmih,
wa_qmel TYPE ty_qmel,
wa_ihpa TYPE ty_ihpa,
wa_crhd TYPE ty_crhd,
wa_crtx TYPE ty_crtx,
wa_qmfe TYPE ty_qmfe,
wa_qmur TYPE ty_qmur,
wa_iloa TYPE ty_iloa,
wa_output TYPE ty_output.
INITIALIZATION.
REFRESH : it_qmih,
it_qmel,
it_ihpa,
it_crhd,
it_crtx,
it_qmfe,
it_qmur,
it_iloa,
it_output.
CLEAR: wa_qmih,
wa_qmel,
wa_ihpa,
wa_crhd,
wa_crtx,
wa_qmfe,
wa_qmur,
wa_iloa,
wa_output.
start-of-selection.
SELECT qmnum
equnr
iloan
ausvn
ausbs
auztv
auztb
iwerk
FROM qmih
INTO TABLE it_qmih.
SORT it_qmih BY qmnum .
DELETE ADJACENT DUPLICATES FROM it_qmih COMPARING qmnum equnr iloan ausvn ausbs auztv auztb iwerk.
SELECT qmnum
qmtxt
indtx
priok
strmn
strur
ltrmn
ltrur
objnr
arbpl
vkorg
vtweg
spart
FROM qmel
INTO TABLE it_qmel
FOR ALL ENTRIES IN it_qmih
WHERE qmnum = it_qmih-qmnum.
SORT it_qmel BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmel COMPARING qmnum
qmtxt
indtx
strmn
strur
ltrmn
ltrur
objnr
arbpl
vkorg
vtweg
spart.
IF it_qmel IS NOT INITIAL.
SELECT parnr
parvw
objnr
FROM ihpa
INTO TABLE it_ihpa
FOR ALL ENTRIES IN it_qmel
WHERE objnr = it_qmel-objnr.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_ihpa COMPARING parnr
parvw
objnr.
IF it_qmel IS NOT INITIAL.
SELECT arbpl
objid
FROM crhd
INTO TABLE it_crhd
FOR ALL ENTRIES IN it_qmel
WHERE objid = it_qmel-arbpl.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_crhd COMPARING arbpl
objid.
IF it_qmel IS NOT INITIAL.
SELECT ktext
objid
FROM crtx
INTO TABLE it_crtx
FOR ALL ENTRIES IN it_crhd
WHERE objid = it_crhd-objid.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_crtx COMPARING ktext
objid.
IF it_qmih IS NOT INITIAL.
SELECT fecod
fegrp
qmnum
FROM qmfe
INTO TABLE it_qmfe
FOR ALL ENTRIES IN it_qmih
WHERE qmnum = it_qmih-qmnum.
ENDIF.
SORT it_qmfe BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmfe COMPARING fecod
fegrp.
IF it_qmih IS NOT INITIAL.
SELECT urcod
urgrp
urtxt
qmnum
FROM qmur
INTO TABLE it_qmur
FOR ALL ENTRIES IN it_qmih
WHERE qmnum = it_qmih-qmnum.
ENDIF.
SORT it_qmur BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmur COMPARING urcod
urgrp
urtxt.
IF it_qmih IS NOT INITIAL.
SELECT tplnr
iloan
FROM iloa
INTO TABLE it_iloa
FOR ALL ENTRIES IN it_qmih
WHERE iloan = it_qmih-iloan.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_iloa COMPARING tplnr
iloan.
LOOP AT it_qmih INTO wa_qmih.
wa_output-qmnum = wa_qmih-qmnum.
wa_output-equnr = wa_qmih-equnr.
wa_output-iloan = wa_qmih-iloan.
wa_output-ausvn = wa_qmih-ausvn.
wa_output-ausbs = wa_qmih-ausbs.
wa_output-auztv = wa_qmih-auztv.
wa_output-auztb = wa_qmih-auztb.
wa_output-iwerk = wa_qmih-iwerk.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_qmel INTO wa_qmel WITH KEY qmnum = wa_qmih-qmnum.
wa_output-qmtxt = wa_qmel-qmtxt.
wa_output-indtx = wa_qmel-indtx.
wa_output-priok = wa_qmel-priok.
wa_output-strmn = wa_qmel-strmn.
wa_output-strur = wa_qmel-strur.
wa_output-ltrmn = wa_qmel-ltrmn.
wa_output-ltrur = wa_qmel-ltrur.
wa_output-objnr = wa_qmel-objnr.
wa_output-arbpl = wa_qmel-arbpl.
wa_output-vkorg = wa_qmel-vkorg.
wa_output-vtweg = wa_qmel-vtweg.
wa_output-spart = wa_qmel-spart.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_ihpa INTO wa_ihpa WITH KEY objnr = wa_qmel-objnr.
wa_output-parnr = wa_ihpa-parnr.
wa_output-parvw = wa_ihpa-parvw.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_crhd INTO wa_crhd WITH KEY objid = wa_qmel-arbpl.
wa_output-arbpl = wa_crhd-arbpl.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_crtx INTO wa_crtx WITH KEY objid = wa_crhd-objid.
wa_output-ktext = wa_crtx-ktext.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_qmfe INTO wa_qmfe WITH KEY qmnum = wa_qmih-qmnum.
wa_output-fecod = wa_qmfe-fecod.
wa_output-fegrp = wa_qmfe-fegrp.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_qmur INTO wa_qmur WITH KEY qmnum = wa_qmih-qmnum.
wa_output-urcod = wa_qmur-urcod.
wa_output-urgrp = wa_qmur-urgrp.
wa_output-urtxt = wa_qmur-urtxt.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_iloa INTO wa_iloa WITH KEY iloan = wa_qmih-iloan.
wa_output-tplnr = wa_iloa-tplnr.
APPEND wa_output TO it_output.
CLEAR wa_output.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM it_output COMPARING qmnum
equnr
ausvn
ausbs
auztv
auztb
iwerk
qmtxt
indtx
priok
strmn
strur
ltrmn
ltrur
vkorg
vtweg
spart
parnr
parvw
arbpl
ktext
fecod
fegrp
urcod
urgrp
urtxt
tplnr.
*CALL FUNCTION 'STATUS_TEXT_EDIT'
EXPORTING
CLIENT = SY-MANDT
FLG_USER_STAT = ' '
objnr =
ONLY_ACTIVE = 'X'
spras = en
BYPASS_BUFFER = ' '
IMPORTING
ANW_STAT_EXISTING =
E_STSMA =
LINE =
USER_LINE =
STONR =
EXCEPTIONS
OBJECT_NOT_FOUND = 1
OTHERS = 2
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id =
language =
name =
object =
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
tables
lines =
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*LOOP AT IT_OUTPUT INTO WA_OUTPUT.
*WRITE : / WA_OUTPUT-qmnum,
WA_OUTPUT-equnr,
WA_OUTPUT-iloan,
WA_OUTPUT-ausvn,
WA_OUTPUT-ausbs,
WA_OUTPUT-auztv,
WA_OUTPUT-auztb,
WA_OUTPUT-qmtxt,
WA_OUTPUT-indtx,
WA_OUTPUT-strmn,
WA_OUTPUT-strur,
WA_OUTPUT-ltrmn,
WA_OUTPUT-ltrur,
WA_OUTPUT-objnr,
WA_OUTPUT-arbpl,
WA_OUTPUT-parnr,
WA_OUTPUT-parvw,
WA_OUTPUT-objid,
WA_OUTPUT-ktext,
WA_OUTPUT-fecod,
WA_OUTPUT-fegrp,
WA_OUTPUT-urcod,
WA_OUTPUT-urgrp,
WA_OUTPUT-urtxt,
WA_OUTPUT-tplnr.
*ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = 'E:\CRM1.TXT'
FILETYPE = 'ASC'
APPEND = ' '
write_field_separator = '|'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
TABLES
data_tab = it_output
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Any suggestions on how to remove an "aura" from around a selection in an image? I shoot pictures at rodeos. To make the rider stand out, I create a mask around the rider and then blur the background with Gaussian Blur. This results in a noticeable blur around the outside of the selection. I have tried using Feathering as well as other Refine Edge Tools. The only thing that works is to go around the edge with the Clone Tool. This is time consuming and not totally successful. So, my two big questions are: (1) Is there a better (simpler) way to avoid the aura? and (2) If not, is there a way to remove the aura that is simpler??
Thanks in Advance,
Art SchwartzSorry, what with the long title I had neglected the body of the message and your statement
The only thing that works is to go around the edge with the Clone Tool. This is time consuming and not totally successful.
seems to answer my first question.
Did you do that before or after blurring?
Have you alternatively tried using Content Aware Fill?
Maybe you are looking for
-
How do i look over my students results in a quiz?
this may sound confusing but im looking to be able to see what answers students put into the quiz section of thier captivate courses, as most of them are short answers, so it would be easier to give them feedback on what they had written if i myself
-
IPhoto book upload failed using iPhoto 9.4.3 and Mountain Lion
Hi I have tried to upload iPhoto book several times but the upload failed. I have tried rebooting my iMac in Safe Mode but this results in iPhoto closing when I try to buy my book. I have uploaded books in the past using Snow Leopard with no issues
-
Send output to multiple recepients(Using External send)
Hi Using the external send for outputs we can send the email of outputs to customers using the email id given in the customer master record , Is it possible to send the output to multiple recepints the same output? Because in the customer master we c
-
I finally got my Mac Mini server not long ago, and i love it, but i ran into a minor problem with the VPN. Ill explain my network setup first: - I have two separate WAN connections -- WAN1 <==> Airport Extreme =en2=[ Lion Server ]=en0=[ internal netw
-
REGARDING TRANSPORT OF G/L master
hi is there any procrdure to transfer of gl master from one client to another cient. actually when we save g/l master we are not getting request number . any guide me vmreddy