How to remove XML messages from Integration Engine

Hi,
i had created file - XI -file scenario activated it and check messages using tcode SXMB_MONI .Error messages coming after every minute as i set polling intervals to 60 seconds .Now i had deleted related objects from IR and ID but still XML messages coming in ....please anyone can help to stop this scenario anyhow.

Dear Jai ,
i had checked everything before this and even i have checked now and i had created that scenaio by my own userid and passwd. Checked sender interface, reciever interface in SXMB_MONI it's the same which i had given name to them . Even we people are surprised that after deleting all the things in IR and ID . i don't know exactly why it is coming but what i am guessing is that after activating the scenarios it might get executed from XI runtime cache and there is no dependency on IR and ID objects . so what i had done that i completely refreshed the XI Runtime Cache by using tcode SXI_CACHE but it's still not working that way also.
Message was edited by:
ashwin dhakne
Message was edited by:
ashwin dhakne

Similar Messages

Error while testing message from Integration Engine.

Hi,
Trying to send message to Integration engine from RWB, using test mesage tab in Integration engine.
I pasted the payload(IDOC payload) , entered sender service, interface name and namespace and also username and password. Selected quality of servie as Exactly once.
While sending the message getting the following error - "Error while sending".
What could be possible reasons for this error.
Thanks.

Hi,
Please check the following possibilities:
1. Make sure you have selected integration Engine oprtion and not the adapter engine.
2. The USERID and password should be correct.
Please let me know if you still face the problem.
Regards,
Shwetambari.

Communication error when sending PI message from Integration Engine to AE

Hi Experts,
we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
Thanks for any help.
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSER</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>

Hi,
So this password change in Exchange Profile + su01 transaction + system restart didn't help.
I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
We also find out that when message arrive to IE we have in java log three entries:
LOGIN.FAILED
User: N/A
IP Address: xxx
Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule    SUFFICIENT ok          exception             true       Received no SAP Authentication Assertion Ticket.
2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false                 true
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
This log is logged under J2EE_GUEST User.
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
Last two logs are logged by SLD_CL_PIQ user.
Thanks for any help!

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSERA</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>
</Trace>

How to remove duplicate messages from Mail in Mavericks (POP)

Hello
I'm having some significant problems with Apple Mail, and despite having researched widely, I haven't been able to find a solution yet. Here is my tale of woe...
My set up is that I use Mail with 5 separate accounts, downloading all messages using POP. I keep all my mail so that I have a permanent record of all conversations, going back more than 10 years - this is about 250,000 emails. I'm running the latest version of Mavericks on a 2010 MBP. I have no intention of moving to IMAP - I need to keep a local archive of all my mail.
A few months ago I was having problems with Mail being very slow to load and search emails. I decided to rebuild the mailboxes, but afterwards discovered that thousands of messages in the inbox of one of my accounts (and some of the sub-folders) had disappeared. Once I realised I tried to go back to a recent Time Machine back up, but, for whatever reason, that part of the back up hadn't worked properly and I was unable to recover the previous status. Ileft it while I decided what to do, and had time to deal with it.
The last 2 years worth of emails on that account were still archived on gmail, so last week I decided to try redownloading the whole lot (something like 72,000 messages), and then uplanned to use one of the scripts I was aware of to remove the duplicates to the trash, and then remove any duplicates in the trash forever. That ought to mean I at least had an archive of the last two years of missing messages, even if I had no record of which ones had been flagged or replied to, etc.
The downloading took about 24 hours to complete, and I now have almost 70,000 messages in the inbox of that account. However, I hadn't figured on two things:
1. Mail 'hides' duplicate messages, meaning that all of the messages I've downloaded are showing as unread, and I can't differentiate the ones I already had in my Inbox, and the new downloads. When I click on those apparently unread messages I can see if they have been replied to or forwarded, etc, but there's no obvious way for me to remove the ones I have already dealt with to the trash, without going through them all manually, which is clearly impossible.
2. The scripts I'd found for removing duplicates don't work. Andreas Amann's Remove Duplicates script doesn't work under Mavericks, and he has abandoned the project. I've also tried the remove-duplicate-messages.scpt made by Jolly Roger (http://jollyroger.kicks-***.org/software/), and while it *sometimes* works on individual subfolders on my Mac (but as far as I can tell removes the duplicate in that folder, rather than the newly downloaded version), mostly it doesn't work at all - it creates a 'Remove Duplicate Messages' folder on my desktop, a log inside it and a folder for removed messages, but nothing appears in the duplicates folder.
So, I'm left in a position where I have 70,000 apparently unread messages in my Inbox, a massively bloated Mail library (which has pretty much doubled in size), a slow and unresponsive Mail program. I figure I have a number of options. Either I could abandon the last week's efforts and revert to the version of

Apologies, this was posted here in error. Please find updated post here: https://discussions.apple.com/message/27261965#27261965

How to remove a message from a Topic before it's consumed?

Hi All,
          I'm using Weblogic JMS Extensions to publish messages to a topic so
          that consumers do not receive them for at least 1 hour after
          publishing. My problem is that I need to be able to delete selected
          messages from the topic sometimes before the consumers see it. I've
          looked everywhere but can't see a simple way of achieving this. Have I
          missed the obvious? (I hope I have!).
          Many thanks in advance.


Essentially, the messages do not exist until that hour. There is
          currently no way to consume them.
          _sjz.
          "jim" <[email protected]> wrote in message
          news:[email protected]..
          > Hi All,
          >
          > I'm using Weblogic JMS Extensions to publish messages to a topic so
          > that consumers do not receive them for at least 1 hour after
          > publishing. My problem is that I need to be able to delete selected
          > messages from the topic sometimes before the consumers see it. I've
          > looked everywhere but can't see a simple way of achieving this. Have I
          > missed the obvious? (I hope I have!).
          >
          > Many thanks in advance.

How to remove a message from a thread...

I would much rather have it, that mail.app could figure out how to thread my messages correctly, but for some reason, when the subject is the same, it always thinks it is the same thread (I have a zillion mails with the subject "meeting"!)
Is there any way to simply, (manually?) select some message, and tell mail.app that those messages should not be an that thread??

You can always go to View and uncheck Organize By Thread, but that will apply to all messages. I don't know of any way to do it on a per-message basis.
The only solution I can think of is to ask your colleagues to quit using stupid subjects like "meeting" and to put something more descriptive in there (like "meeting with John Smith" or "meeting on 11/20")!

Remove faces messages from context

Hi,
I am using below code to remove messages from context.
But unable to remove messages.
Please any one help me how to remove faces messages from context.
Iterator iterator = FacesContext.getCurrentInstance().getMessages();
while (iterator.hasNext()) {
iterator.remove();
}Thanks,
sivareddy
Edited by: sweetreddy2001 on Aug 26, 2009 6:56 PM

Check the topic right below yours in the topic listing. The same question was asked and answered some hours ago.

How to find the IDOC for the archived message in integration engine

Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar

> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh

How to remove large message stuck in the adapter engine?

Hi experts,
We have a large message abt 100 MB stuck in the adapter engine which is causing the J2EE server to restart continuously.
I have tried increasing the heap sizes and the number of threads in config tool, but no luck. My question here is how to remove that message? Also I checked smq1 and smq2 both are empty.
Regards.

Hi Nagasatya,
This issue is realted to Large amount of data.You have to write condition in the query.I have face same issue,but resolved it.Please do the following steps.
Go to Configtool and selct the com.sap.aii.adapter.jdbc.svc and set this jdbc service to start manually instead of auto.
Then restart server0, this time it should be started successfully. Then go to rwb and try to
find if any jdbc hanging/failed messages are there, if so, cancel them;also deactivate the problematic jdbc communication channel, otherwise itwill poll the data again. After all above, you can manually try to start this jdbc.svc particually.
Thanks
Ravi

How can we forward XML document from Routing Engine to Mapviwer!!!

Does anyone try to forward XML document from routing engine to Mapviwer. Like spatial coordinate system from Routing engine. Could you help me how to accomplish this problem. Thank much much....

Just open an HTTP connection to MapViewer's server url (ususally http://host:port/mapviewer/omserver) and send an XML map request to it using POST. You can do that from any language that supports such a connection.
Inside the xml map request you can attach the routing result (a series of coordinates i imagine) as dynamic geo-features. You can also specify any base map/layer information in the xml map req provided you have defined such map/themes. DTD of mapviewer's map req is in the Users Guide, which is on OTN site mapviewer http://otn.oracle.com/products/mapviewer.

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

How do i remove recovered messages from my email

I need help removing recovered messages from my email.

I posted a very similar question. The answers I received here did not help. For anyone else looking, here is the solution that finally worked. My son found it via a Goolge search:
Best answer - Sarah (Google Employee) Go to this answer
chessop
Please follow below steps.
1.Take your gmail account offline from Mail and delete the recovered messages folder.
2. Download the widget to show the hidden files fromhttp://www.apple.com/downloads/dashboard/developer/hiddenfiles.html
3. Go to UserName/Library/Mail/IMAP-<username>@[email protected]/.OfflineCache
4. Delete all the data under .OfflineCache folder - DO NOT DELETE the folder.
5. Close Mail application and reopen.
This should do the job.
Best regards,
Aadi
338 of 359 people found this answer helpful. Did you? Sign in to vote. Report abuse
See the answer in context

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

HTTP error 403 from Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
It looks like these error due to security reason, it seems some authorization profile is missing or may be some other issue,kindly help us at that front.
Thanks and Regards,
Satish

Hi Suraj,
Thanks for the update.We had checked the URL before posting this message,it is picking up correct URL with namespoace, UID and PWD.Exact error that we are getting is as follows:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL: http://MB1ES1025:50200/sap/xi/adapter_plain?namespace=http://frictionless.esource.com/v2.0&interface=MI_ESI_AWARD_PO&service=FCI_TENANT&QOS=BE&sap-user=pisuper&sap-password=sap$29&sap-client=001&sap-language=EN. Please contact your system administrator.
Here all information are correct.We have checked the SLD check, that is also working fine.Also it is not connectivity related issue, as we are able to transmit XML file to E-Sourcing.
It looks like security issue, but what authorization needs tobe given exactly for HTTP call, we need to know or may be some other issue.
Thanks and Regards,
Satish

Read XML message from a CLOB

We are currently receiving XML messages from a business partner that goes
through a transformation/parser first to make sure the xml document was
in MISMO form (Mortgage Industry Standard Message Organization). Then the
document is stored in a clob in a table. The document is stored Without
the tags. We are storing these XML messages into a CLOB datatype for
later processing. I want to read the CLOB and then parse out the
individual fields to store into a table. What is the best way to
accomplish this in PL/SQL? Here is one sample record:
<MORTGAGEDATA>
<APPLICATION LoanPurposeType="OTHER">
<LenderCaseIdentifier>3631681</LenderCaseIdentifier>
<LendersBranchIdentifier>2966448</LendersBranchIdentifier>
</APPLICATION>
<PROPERTY PropertyUsageType="Primary">
<Address1>1335 test</Address1>
<City>las cruces</City>
<State>NM</State>
<PostalCode>88001</PostalCode>
</PROPERTY>
<SUBJECTPROPERTY>
<SubjectPropertyEstimatedValueAmount>69000</SubjectPropertyEstimatedValueAmount>
</SUBJECTPROPERTY>
<BORROWERRECONCILEDLIABILITY LiabilityType="HelocSubjectProperty">
<LiabilityUnpaidBalanceAmount>0</LiabilityUnpaidBalanceAmount>
<LiabilityMonthlyPaymentAmount>0</LiabilityMonthlyPaymentAmount>
</BORROWERRECONCILEDLIABILITY>
<BORROWERRECONCILEDLIABILITY LiabilityType="MortgageLoanSubjectProperty">
<LiabilityUnpaidBalanceAmount>0</LiabilityUnpaidBalanceAmount>
</BORROWERRECONCILEDLIABILITY>
<BORROWER>
<FirstName>scooby</FirstName>
<MiddleName/>
<LastName>doo</LastName>
<NameSuffix/>
<MothersMaidenName>velma</MothersMaidenName>
</BORROWER>
</MORTGAGEDATA>
NOTE: I have tried to use DBMS_XMLQUERY and it comes out like this using a
stored procedure called printclob: When I do this the data is put into
one field called xml_app_msg. The problem is how do I reference the
individual fields like FirstName and so on to store in another table? Can
I apply a stylesheet and if so, how?
Or do I create an object type called xml_app_msg with the fields lastname
and so on?
-- The table is raw_xml_msg_tbl and the field with the stored infomation is
xml_app_msg.
set serveroutput on size 50000
declare
queryCtx DBMS_XMLquery.ctxType;
result CLOB;
begin
queryCtx := DBMS_XMLQuery.newContext('select xml_app_msg from raw_xml_msg_tbl where app_id = :APP_ID');
-- DBMS_XMLQuery.clearBindValue(queryCtx);
DBMS_XMLQuery.setBindValue(queryCtx,'APP_ID','LT1001');
-- get the result..!
result := DBMS_XMLQuery.getXML(queryCtx);
-- Now you can use the result to put it in tables/send as messages..
printClobOut(result);
DBMS_XMLQuery.closeContext(queryCtx); -- you must close the query handle..
end;
OUTPUT:
<?xml version = '1.0'?>
<ROWSET>
<ROW num="1">
<XML_APP_MSG><MORTGAGEDATA>
<BORROWER>
<FirstName>Falls</FirstName>
<MiddleName/>
<LastName>Water</LastName>
<NameSuffix/>
<SSN>123-45-6789</SSN>
</BORROWER>
</MORTGAGEDATA>
</XML_APP_MSG>
</ROW>
</ROWSET>
null

I parse the XML doc into a domdocument and then loop through using xpath.valueof to pull the individual values from the nodes and then build a generic insert. It works quite well with a small number of columns. I'm not sure how it would work with a lot of columns. You can get code examples from Steve Muench's book "Developing Oracle XML Applications".

How to remove XML messages from Integration Engine

Similar Messages

Maybe you are looking for