How to remove uncommitted changes made in a table through JAG?
Hi,
Is there any possibility to remove the uncommitted row from a Table through JAG.
For Example,
If I Click " AddRow " button in a Table and enters value for all the Attributes in that particular Row and if I click the " Cancel " Button, that newly added uncommitted row should be removed by refreshing the Particular page.
Simillarly , if i update a column in a Row and press cancel button , the uncommitted value of that column should be rollBack to its commited value(ie., to its previous value).
Thanks,
You can generate a Delete? column in the table by setting the Group property Multi-Row Delete Allowed.
Other than that, you can generate it through JAG by using custom generator templates, like described in section 4.7 of the JHeadstart Developer's Guide. You can for example drag and drop the Rollback operation of the Application Module as a button and call it a Cancel button.
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting
Similar Messages
-
How to remove all changes made to an image in Camera Raw -
In CS4 with latest ver. of Camera Raw, I think there is a way to remove all changes previously made to an image while using Camera Raw.
In other words after doing this the little icon in the upper right hand corner of an image in Bridge that indicates changes have been applied to an image, should be gone. Another way of asking this would be to say, how can I start all over again with the original image in Camera Raw by removing all changes prefiously made to it in Camera Raw?
TIASorry, I don't know the answer to that for sure*. As a certified old geezer who avoids cluttering his mind with stuff that can easily be looked up in a menu, I stay away from keyboard shortcuts as much as I can, using only those applicable system wide, the most obvious ones in Photoshop like deselect, etc.
* However, since no such shortcut appears next to the menu command, I doubt there is one.
You could create an action and assign it a key command, though. Doh!
Never mind. That was a total brain short circuit. You can't create actions in Bridge. You'll need a script. Ask in the Bridge Scripting forum.
Message was edited by: Ramón G Castañeda -
How to remove or change wipe effect in MenuBar?
Does anyone know how to remove or change the default wipe
effect in Flex 3's MenuBar? I've seen several mentions online about
an openDuration property in the Menu class, but not in MenuBar. I
would greatly prefer to have either no effect or just a very brief
fade.
A solution in either MXML or ActionScript would be greatly
appreciated.
Thanks very much!
Mike LaurenceWe had an old version of Dreamweaver (DW-MX) in which I have found the layer. It apears to be an image made in Photoshop.
The way I solved the problem now is that I deleted the layer in DW-MX and made a new background image. I am no pro, just an amateur
Anyway, thank you very much for your fast reply and the offer to help me out this problem. -
How can I get changes made in documents on my Windows 7 computer to show up in the documents on my iPhone 5? These documents show up in ICloud without showing the changes.
You have to be accepted into the Apple Beta program before any of that works.
-
How to see the changes made for iPad in iTunes on my iPad?
How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?
Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
Thanks for your help, it works now :-) -
How to remove or change the color of hair in a beard? [was:does anyone know]
how to remove or change the color of hair in a beard
There are many ways to do that and there are many free tutorials on the web for doing that in Photoshop.
-
How to remove and change the color of Java cup and border
Hi to all,
How to remove and change the color of Java cup and border.
Thanks in advance
khiz_engThis is just an Image. You would need to create your own image and call setIconImage(Image) on your JFrame.
-
How can we log changes made in RSA1 in BW/BI
How can we log changes made in RSA1 in BW/BI ?
Please advise.
Regards,
ArchanaHi Arun,
Thanks for your reply.
Basically I wanted to get the log for a particular user when executing RSA1 tcode (the user has change access).
Do we have any table which records the RSA1 changes.
Thanks.
Regards,
Archana -
How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101. -
How to remove or change apple id rescue email address
How to remove or change apple id rescue email address
Also how to delete the iCloud idYou cannot delete your iCloud account.
iCloud IDs ending in @mac.com, @me.com or @icloud.com cannot be changed.
The rescue email address for your Apple ID can be changed here: https://appleid.apple.com/ -
How to Track the changes made to the custom table field value
I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
KrantiHi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan -
How to remove the approved order from the table in sapui5
Hi Experts,
how to remove the approved order from the table in sapui5.
After Approving the order how to remove the order from the table in sapui5.
Please help me.
Thanks & regards
chitti BabuHi,
Probelm is OBIEE on your machine.Some one might have deleted pdf option.
Refer : http://obiee101.blogspot.com/2009/07/obiee-dashboard-default-controls.html
Try to find out tag that is to be removed from controlmessages.xl so that you have only HTML.
Update :
Stop BI Server.Try removing below tag and restart server.
(sawm:if name="enablePDF">(a class="NQWMenuItem" name="pdf" href="javascript:void(null)" onclick="return PortalPrint('@{pdfURL}[javaScriptString]',@{bNewWindow});">
<sawm:messageRef name="kmsgDashboardPrintPDF"/></a)</sawm:if)
Regards,
Srikanth
Edited by: Srikanth Mandadi on Apr 19, 2011 3:36 AM -
How to check the Statistics generated for a table through DBMS_STATS.
Hi,
How to check the statistics generated for a Table through DBMS_STATS.GATHER_TABLE_STATS procedure ?
Please let me know.
Thanks !
Regards,
RajasekharRajasekhar wrote:
Hi,
How to check the statistics generated for a Table through DBMS_STATS.GATHER_TABLE_STATS procedure ?
Please let me know.
Thanks !
Regards,
Rajasekharquery ALL_TABLES -
Swing .............how to undo the changes made by user
Hi,
i have created a form in swing asking for the related information from user whose value i m taking in jformetted textfield.
now i have placed two buttons there.
one is Apply and second is Cancel.
when user pressed Apply button all the changes made by the user must be set where as if user clicks cancel button all the changes made by user should be undo to previously set value.
can anybody help me how this can be done and what code should i write in action performed method
thanks in advance
plz replythanx.
one more thing
In my application,there is one Button called Option when u clicked on it.It opens up one internal frame where user is asked to asked to fill some parameters.
1) Now how can i restrict user to create one more internal frame unless first one is closed.
2) suppose i clicked option button and it opens up internal frame where i can set the parameters and closed it.If i again click on option then i want the parameter to have wht i just set.
3) and how can pass those parameters value to my main frame from where i m calling internal frame
Plz reply
Edited by: neel007 on Mar 11, 2009 8:02 PM -
How to know the changes made to Quotations & Sales orders?
Hi all
I want to know how we can have the records of changes and alterations that are made in quotations and Sales orders. For example, once the quotation is created and saved, there must have been many alterations either on pricing or in terms & conditions based on the final negotiations with the customer. Please let me know how do we record the changes.Hi,
what ashish told is exactly correct.You just go to the Environment-changes and execute,it will shows all the changes made for that order like pricing,payment terms etc.
Regards,
Hari.
Maybe you are looking for
-
Syndication Search Using Remote System
Is there a way to use the Key Mapping's remote system as part of the search criteria for syndication? I am not referring to the map property that allows you to suppress records that do not have a remote key. For example, only send records when "remot
-
Moving Home / Lack of Customer Service / Cancellat...
I write to express my complete astonishment and disgust with the level of service BT has offered to me as a valued long standing customer. I have been a customer of BT for approximately 4 years, taking out a phone line, unlimited broadband, BT vision
-
PLEASE HELP! Photoshop CS3 Error code
My photoshop out of the blue just stopped working. It goes go to the loading part, then it finishes loading. Stays there for like 5 seconds then it crashes. Adobe Fireworks works perfect, however photoshop doesn't anymore. Please help, this is urgent
-
HI ALL, vendor special G/L Indicator H is not maintained in PRD and we have cheked in sand box clinet.Here its maintaining "H".BUT IN GOLDEN CLIENT ITS NOT MAINTAING WE HAVE CHEKED THROUFH FBKP AND OBYR.BUT ITS SHOWING IN THE TABLE,THEN WHAT WE NEED
-
Powerpc applications on mavericks
is there a way to run powerpc applications on mavericks 10.9 ? i cannot run SimCity 4 deluxe on my mac. I get a message says PowerPc app. are not supported.