How to remove channel from DAQmx create Task.vi

Vikas H. Kumthekar
ASE
Tata Consultancy Services
Pune-1

How are you using the DAQmx Create Task.vi? Are you using it to include a global channel or copy a task that was previously created in Measurement and Automation Explorer (MAX)? If this is the case the only way to remove a channel would be to delete the global channel or modify the physical channels for that task in MAX. If you are creating a new task you can use the DAQmx Create Channel.vi to specify the physical channels that you would like to include or exclude.
Regards,
Andy F.
Applications Engineer
National Instruments
National Instruments

Similar Messages

  • How to remove channel from DAQmx Task

    I need to add remove channels from the task programmatically. How can I achieve it.
    Also while downloading my program to RT controller my system stops responding if I have DAQmx timing VI in my program. My program is running fine on windows system with DAQmx Timing.

    How are you using the DAQmx Create Task.vi? Are you using it to include a global channel or copy a task that was previously created in Measurement and Automation Explorer (MAX)? If this is the case the only way to remove a channel would be to delete the global channel or modify the physical channels for that task in MAX. If you are creating a new task you can use the DAQmx Create Channel.vi to specify the physical channels that you would like to include or exclude.
    Regards,
    Andy F.
    Applications Engineer
    National Instruments
    National Instruments

  • Remove channel from DAQmx AI task - reconfigure existing task

    Is there still no way to remove an AI channel from an existing DAQmx task? I know that it's possible to add a channel to a task using DAQmxCreateAIVoltageChan.
    Removing seems to be possible only by clearing the task and creating a new one, but this ends up in error -50103 (The Specified Resource is Reserved.) at creating and clearing a task continuously (after ~ 100 - 1000 iterations).
    Measuring device is USB-6225.
    Any idea ?

    Unless you want to learn how to do this with the Excel add-on called Measure, you should post to the much more appropriate Multfunction DAQ board.

  • How to remove security from pdf created in Acrobat pro 10 to allow addition of watermark?

    Hi All,
    I am a newbie to the forum. I have a dynamic form created in acrobat pro 10. Each time I open the form to add watermark on it, i have a message that says " You don't have sufficient permissions to perform this tasks" and as a result the watermark process will not proceed.
    When I created the form, I save the form with no security in the default. But,when you click on the form properties, it will display that this form has some pdf restrictions such as :
    Changing the document " Not Allowed" .
    Document assembly " Not Allowed"
    Page extraction " Not Allowed"
    Filling of form fields " Allowed"
    Page exratction " Not Allowed"
    and host of other restrictions.
    My question is how will I change this dynamic fillable form to allow all options as "Allowed" as this pdf form has some restrictions.
    If all options are allowed like in normal pdf, I am able to add the watermark but when a restiction is placed, the message "You dont have sufficient permissions to perform this task is displayed.
    Any help is greatly appreciated as I need to add the watermark as a control for this forms during distribution. If you want me to send the attachment and the message, i would greatly welcome it.
    Many Thanks!
    Lovina

    Hi George,
    Yes, the form was created in livecycle designer. So, what can I do to add
    the watermark and removed the options of not allowed to allow acrobat to add
    watermark?
    Many Thanks!

  • Empty task out from DAQmx Create Virtual Channel (VI)

    Hi, 
    I'm using a NI USB_6008 in my project and I use ao0 to provide my device with supply-voltage. And I use ai1 to measure voltage on my device. The thing is that I have been using another identical USB_6008 before, and everything worked just fine, but now when I want to use this new DAQ, it doesn't work at all and I get "empty" or "unnamed" task out. I have the right serial-number and device-number in my hardware initiation. And I have used the test panel in    "Measurement & Automation Explorer to check that the channels works properly. I have also changed the USB-port and also updated my drives. But nothing has helped. 
    Unfortunately I can not send the code here since it's too big and complicated but I'll attach a screen-shot of the part the I'm stucked in with the "probe" values. 
    I'll really appreciate it if someone could explain for me why I get "unnamedTask". 

    Just came across this while looking for something else.
    Your tasks are unnamed because you haven't named them .  You can name your task when you call DAQmx Create Task.vi:
    In the case of the first VI, the task is being implicitly created when the channel is created, so an "unnamed" task is the result.
    Best Regards,
    John Passiak

  • Error Code -50150 from DAQmx Create Channel (AI-Voltag​e-Basic).v​i

    I have an executable, built from Labview 7.1 VI's. All it is doing is reading 6 voltages back from a 6008 USB-DAQ, and reporting the results back. Occasionally, it is throwing an Error -50150 from DAQmx Create Channel (AI-Voltage-Basic).vi. The full error message is:
    Error Code: -50150
    DAQmx Create Channel (AI-Voltage-Basic).vi<append>
    <B>Task Name: </B>_unnamedTask<0>
    Can anyone shed some light on this problem?
    Cheers.

    Hi fellas,
    I have a really similar problem to the one Neilelph had, but I can´t see how to solve it from your answers. I attached a picture of my main .VI.
    It´s basically a photodiode measurment system working as follows:
    1. First the moving stages for the system get ready (X-Y moving stages for the Photodiode and Z stage for the Laser). That´s the CONFIG subVI in the left.
    2. Then there is a For Loop, that repeats N times depending on the Initial Z, final Z and step values. So in this .VI the laser moving stage is the only one changing.
    3. In each loop, the stages go to the X,Y,Z(t) posiition (MOV subVI), wait for the movement (WAIT subVI) and read the position. After that, the DAQmx acquistion part starts. I just sample the output DC voltage coming from the  Photodiode (Dev1/ao1), 1000 samples in 1 second, and then I make an average of all of them with the Basic DC/rms block. So at the end I have 1 position of Z and one DC value. And it worked perfectly. At least for small number of iterations I have no problems. 
    The problem comes with small steps and a great number of iterations. For example last night I ran a measurement. 10000 iterations, the whole range of Z, and today i checked it. It worked fine until 5000 give or take, the half of the range. From that point, the DC ouput recorded in the .lvm file is just 0.00000. It´s the second time it happens, so I´m wondering what´s wrong because I´m affraid to make more long measurments and obtain the same results. 
    The error message I obtained is the same than in the thread title: -50150  DAQmx Create Channel (AI-Voltage-Basic).vi:6<append> <B>Task Name: </B>_unnamedTask<53BC>
    Maybe it would be useful to mention that, sometimes, there is no error and I have some DC Output Voltage value, for random Z potitions, but since the first error message, that barely happens. The output is almost always 0.
    Sorry for my writting skills in English. I hope you can understand my situation.
    Thank you in advance.
    Kind regards,
    frilance.
    Attachments:
    Diagram.JPG ‏83 KB

  • Extract single channel from DAQmx Task

    Hello,
    I have created a DAQmx output task, which contains two channels.  Is it possible to extract individual virtual channels from the task to be processed by two parallel processes?  I have tried bringing out the Channels Property using a Task Property Node, but I then get the error that the channel is not part of an active task (see attached snippet)
    Could anyone advise on a better approach, or how to acheive this functionality - if it is possible?
    Regards
    Dave
    Solved!
    Go to Solution.
    Attachments:
    split out channels from DAQmx task.png ‏34 KB

    Sorry, that VI does not make much sense. You have to use a single DAQmx Write for both channels and for 1 Sample mode, you simply have to build an array of the signals as shown below.
    Attachments:
    two channel write.png ‏12 KB

  • Does anyone know how to remove images from google

    i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the google images i had some really bad regrets !! i reallywant to know how i can remove pictures off the google image search  even doe this does not kind of relate thank you .

    Does anyone know how to remove vocals from an import from I tunes...a  polyphonic stereo mix ?
    If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
    The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
    Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
    1. Import a Stereo mix into a Logic Stereo track.
    2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
    3. Hard Pan L/R both stereo tracks.
    4. Insert an EQ and Gainer plugins into the duplicated track (R).
    5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
    6. Open the Gainer plugin and thick the "Phase Invert" Right button.
    7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
    P.S Click the image below to show its real resolution!
    Regards,
    A.G
    ======================================
    www.audiogrocery.com
    Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
    ======================================

  • Does anyone know how to remove vocals from an import from I tunes...a  polyphonic stereo mix ?  o mixdown ,

    Does anyone know how to remove vocals from an import from I tunes...a  polyphonic stereo mix ? What are some other editing allowed on a stereo import (polyphonic mix) Thanks, Sploink.

    Does anyone know how to remove vocals from an import from I tunes...a  polyphonic stereo mix ?
    If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
    The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
    Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
    1. Import a Stereo mix into a Logic Stereo track.
    2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
    3. Hard Pan L/R both stereo tracks.
    4. Insert an EQ and Gainer plugins into the duplicated track (R).
    5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
    6. Open the Gainer plugin and thick the "Phase Invert" Right button.
    7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
    P.S Click the image below to show its real resolution!
    Regards,
    A.G
    ======================================
    www.audiogrocery.com
    Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
    ======================================

  • Error 229771 DAQmx create task internal MIG error

    Receiving error 229771 @ DAQmx create task.vi: 2, internal error in MIG software.  not start task. - for a simple ThermoDAQ read application
    reinstalled drivers, attempted to start NI configuration mgr and Device loader but they are immediately stopped-  disabled anti virus, etc.   help?

    Hi eremark,
    There are a few things we can try to troubleshoot error 229771. This error can occur if NI services are not running and occurs when LabVIEW tries to communicate to these non-running services. It can also occur if you have a corrupt MAX database. There are a few things we can try
    1. Can you please try verifying if NI services are running?
    2. Can you check if you are administrator of your PC?
    3. Do you know if DAQmx was installed under an administrator account?
    4. Have you tried disabling your firewall?
    5. Try removing all DAQ devices, restarting your computer with them removed, shutting down the computer again and connecting them back up. 
    6. Did you repair your daqmx drivers or reinstall them? It is important to make sure you do a true reinstall (http://digital.ni.com/public.nsf/allkb/ADD22E807D5A12AD862579EC00760F79?OpenDocument) instead of repair which will force overwrite anything from previous installations
    7. Try repairing a corrupted MAX database - http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C?OpenDocument http://digital.ni.com/public.nsf/allkb/7FF79722720AEE488625759B0074A2CA?OpenDocument 
    Please let me know if you have any questions or need any clarification with any of these troubleshooting steps. Thanks
    Doug W
    Applications Engineer
    National Instruments

  • How to remove Unicode from XML file

    I get following error when unmarshal xml:
    [java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
    Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
    Thanks

    These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

  • How to remove text from .swf animation?

    how to remove text from .swf animation? Can no find this text
    in fla file. Flash 8.

    exactly what 'text' are you referring to? text that you typed
    on the Stage using the 'textTool'? simply select the text with the
    'arrowTool' and hit delete.
    If you are referring to a textField that you want to
    eliminate after a certain amount of time, within your animation
    sequence. first copy the text, create a new layer, paste the text
    in place, then where you want to have the text 'disappear' insert a
    'blank keyframe' at that point in the text layer.
    OR place the textfield within a MC and remove it with code.
    OR if the text is dynamic and you wish to use the position at a
    later time, pass a value of null or and empty string to the field
    at the point you wish. And there are other ways still. :) hope one
    of these works for you.

  • Notebook defekt, how to remove it from PSE13 registration?

    My old notebook is scrap. How to deactivate it for PSE13, to enable registration on the new computer?

    Hi Arpit,
    thanks for your answer. You told me no news, so it was not helpful: I
    asked my question because I could not register - the old machine was
    already the second one...
    Regards - WolfEf
    Am 02.04.2015 um 21:09 schrieb Arpit Kapoor:
    >
          Notebook defekt, how to remove it from PSE13 registration?
    created by Arpit Kapoor <https://forums.adobe.com/people/Arpit+Kapoor>
    in /Photoshop Elements/ - View the full discussion
    <https://forums.adobe.com/message/7400133#7400133>

  • HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone.   Now, I need to remove some, as they are taking up too much space.  I cannot figure out how to remove them from the

    The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000).   Now, I need to remove some, as they are taking up too much space.  I cannot figure out how to remove them from the phone.  I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone.  I've read as many articles as I can find, but still cannot manage this.  Thanks for any help.

    Open itunes, connect iphone, select what you want, sync

  • How to remove pics from my 3GS...???

    How to remove pics from my 3GS..???

    Photos taken with the phone can be deleted by selecting them and hitting the little wastebasket icon in the right bottom corner.
    Photos you did sync to your phone, can only be removed by deselecting them in the photo pane in iTunes, the following sync will remove them from the phone.

Maybe you are looking for

  • IF CONDITION IN BEx

    Hi bw guru's     i need to write the IF condition in BEx reporting.. IF PAID AMOUNT = 0 THEN DISPLAY THE RATED AMOUNT i need to write the above condition in reporting level can any one help me out on this ... thanks and regards Uma reddy

  • Logic error(I cant make it do what i want) plz help

    im writing a program for my lab at school and i cant figure out how to make it work. i thought i had figured it out, its close but not all the way there. im supposed to write a program in which 2 dice are rolled and the sum is added up. the dice shou

  • Strange problem with cingular treo 650

    Greetings to All,                          Im from pakistan ,I just got cingular treo 650 hanset from my friend  and it is having bunch of issues when I start the phone it says not enough memory to activate the phone although bettry is full and have

  • I'm trying to password a Finder folder. Is this possible?

    iMac running 10.8.2. I'd like to password just a couple of folders but I'm having trouble finding a way. Thoughts?

  • How to fill the reference key in BAPI_ACC_DOCUMENT_POST

    Hi,   Currently iam uploading data for FB01 transaction using BAPI_ACC_DOCUMENT_POST. I want to fill the Reference key of header as input. Please let me know the data which we have to fill the input fields. Thanks in advance, Regards, Krishna..