How to fill the reference key in BAPI_ACC_DOCUMENT_POST

Hi,
  Currently iam uploading data for FB01 transaction using BAPI_ACC_DOCUMENT_POST. I want to fill the Reference key of header as input. Please let me know the data which we have to fill the input fields.
Thanks in advance,
Regards,
Krishna..

BAPI_ACC_DOCUMENT_POST having error message RW 609

Similar Messages

  • Reteiving Accounting Document number  by passing the reference key

    Hi All,
    I have the reference key (bkpf-awkey), fiscal year(gjahr) and bukrs and I need to retreive the Accounting doc number(Belnr).
    Right now, I am writing a select statement to retreive belnr from bkpf  and passing bukrs, gjahr and awkey in the where clause (for all entries in another internal table containing these fields).
    But the performance is pretty poor. Pls help.

    Hi,
    you have to go for index 4 of BKPF (with fields MANDT, AWTYP, AWKEY, AWSYS).
    Your select does not contain AWTYP, so this index is not used. You are filling BUKRS and GJAHR - but you don't have BELNR (that's what you want to get), so primary key won't help (unless you have thousands of BUKRS, unlikely picture).
    So select some entries to figure out, which AWTYP you use, maybe you can even specify AWSYS. Then index 4 should be nearly as fast as the primary key. To not confuse the DB optimizer, don't fill BUKRS and GJAHR - this won't speed up your select in case index 4 is used, but might prevent the system to use index 4.
    Regards,
    Christian

  • How to fill the values in List Box?

    Hi Experts,
    Can anyone explain me how to fill the values in the List Box such that the value should be from the table?
    For Example : Fill the EmpID from table T1 into the ListBox?
    Thanks in Advance,
    Regards,
    Raghu

    hi,
    and u doing it through report means from se38 than here is code...
    DATA : BEGIN OF itab OCCURS 0,
            matnr LIKE mara-matnr,
           END OF itab.
    DATA : ok_code LIKE sy-ucomm.
    CALL SCREEN 0200.
    *&      Module  STATUS_0200  OUTPUT
          text
    MODULE status_0200 OUTPUT.
      SET PF-STATUS 'Z200'.
    ENDMODULE.                 " STATUS_0200  OUTPUT
    *&      Module  USER_COMMAND_0200  INPUT
          text
    MODULE user_command_0200 INPUT.
      CASE ok_code.
        WHEN 'BACK' OR 'UP' OR 'CANC'.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0200  INPUT
    *&      Module  mat_val  INPUT
          text
    MODULE mat_val INPUT.
      SELECT matnr FROM mara INTO CORRESPONDING FIELDS OF TABLE itab
        WHERE matnr BETWEEN '000000000000000101' AND '000000000000000109'.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            retfield               = 'MATNR'
           VALUE_ORG              = 'S'
          tables
            value_tab              = itab
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    ENDMODULE.                 " mat_val  INPUT
    <b>And this is flow logic..</b>
    PROCESS BEFORE OUTPUT.
      MODULE status_0200.
    PROCESS AFTER INPUT.
      MODULE user_command_0200.
    PROCESS ON VALUE-REQUEST.
      FIELD itab-matnr MODULE mat_val.

  • How to get the reference of the cell id in validate method in adf

    Hi All,
    I am using Jdeveloper 11.1.1.2 and i am using custom validator where i have registered the validator in facesconfig.xml.I need to know how can i get the ID of the inputtext box which is present in the hierarchy as Panel Header->Table->column->textbox :-
    Below is my custom validator class source , please tell me how to get the reference of the textbox which is present in such hierarchy.:-
    package validator;
    import java.io.Serializable;
    import java.util.Date;
    import javax.faces.application.FacesMessage;
    import javax.faces.component.UIComponent;
    import javax.faces.context.FacesContext;
    import javax.faces.validator.Validator;
    import javax.faces.validator.ValidatorException;
    import oracle.adf.view.rich.component.rich.input.RichInputDate;
    import oracle.adf.view.rich.component.rich.input.RichInputText;
    import oracle.adfinternal.view.faces.bi.util.JsfUtils;
    public class ValidateConversion implements Serializable, Validator {
    public ValidateConversion() {
    super();
    public void validate(FacesContext facesContext, UIComponent uIComponent,
    Object object) throws ValidatorException {
    System.out.println("*************");
    System.out.println((String)object);
    //get component id by get("AttributeName");
    String conversionComponentId = (String)uIComponent.getAttributes().get("UncommittedOrder_PH:t7:it14");
    System.out.println("conversionComponentId=" + conversionComponentId);
    RichInputText conversionComponent = (RichInputText)uIComponent.findComponent(conversionComponentId);
    Integer conversion = (Integer)conversionComponent.getValue();
    Integer quantityInBags = (Integer)object;
    //get labels from the two inputDate component.
    String conversionLabel = conversionComponent.getLabel();
    String quantityInBagsLabel = ((RichInputText)uIComponent).getLabel();
    Integer remainder = (quantityInBags % conversion);
    //throw error if valiation fails
    if (remainder > 0) {
    throw new ValidatorException(new FacesMessage(FacesMessage.SEVERITY_ERROR,
    "The " + quantityInBagsLabel + " should be in multiples of" + conversion +".",
    null));
    Thanks,
    Plese reply!!!

    Thanks Jabr,
    This is my jsff page source and i need to find the reference of it14 which is the textbox :-
    <af:panelGroupLayout id="pgl1" styleClass="AFStretchWidth">
    <af:panelHeader text="Results" id="Results_PH" size="1">
    <af:table value="#{bindings.queryProductResponseType.collectionModel}"
    var="row"
    rows="#{bindings.queryProductResponseType.rangeSize}"
    emptyText="#{bindings.queryProductResponseType.viewable ? 'No data to display.' : 'Access Denied.'}"
    fetchSize="#{bindings.queryProductResponseType.rangeSize}"
    rowBandingInterval="1"
    filterModel="#{bindings.queryProductResponseTypeQuery.queryDescriptor}"
    queryListener="#{bindings.queryProductResponseTypeQuery.processQuery}"
    filterVisible="true" varStatus="vs" id="ResultTable_t"
    width="99%" partialTriggers="::cb1 ::cb2 ::cb3 it14"
    binding="#{viewScope.GrowerOrderBean.resultTable}"
    columnStretching="last" rowSelection="multiple"
    sortListener="#{viewScope.GrowerOrderBean.sortResultTable_action}"
    autoHeightRows="8" first="0"
    inlineStyle="height:196px;margin:10px"
    selectionListener="#{viewScope.GrowerOrderBean.resultRowSelect_action}">
    <af:column filterable="false" sortable="false" headerText="Select"
    id="c9" width="55" rendered="false"
    filterFeatures="caseInsensitive">
    <div align="center">
    <af:selectBooleanCheckbox value="#{row.bindings.booleanFlag.inputValue}"
    label="#{bindings.queryProductResponseType.hints.booleanFlag.label}"
    required="#{bindings.queryProductResponseType.hints.booleanFlag.mandatory}"
    shortDesc="#{bindings.queryProductResponseType.hints.booleanFlag.tooltip}"
    id="it19" autoSubmit="true">
    <f:validator binding="#{row.bindings.booleanFlag.validator}"/>
    </af:selectBooleanCheckbox>
    </div>
    </af:column>
    <!-- START of column created by SYSTIME -->
    <af:column sortProperty="quantity" headerText="Quantity in Bags" filterFeatures="caseInsensitive"
    id="c54" rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterable="true" sortable="true">
    <af:inputText label="Quantity in Bags" id="it14"
    partialTriggers="it19" autoSubmit="true"
    readOnly="#{row.activeYN == 'N' or row.availability &lt; 0 or row.availability ==0}"
    valueChangeListener="#{viewScope.GrowerOrderBean.compare}">
    <af:validateLongRange id="RangeCheck_Val1" minimum="1"
    maximum="#{row.availability * row.conversion}"
    messageDetailNotInRange="You have entered a quantity more than is available. Quantity entered must be in the range of {2} to {3}"
    messageDetailMinimum="Minimum {0} allowed is {2}"
    messageDetailMaximum="Maximum {0} allowed is {2}"
    hintNotInRange="#{'Quantity In Bags to Order'}"/>
    <af:validateRegExp pattern="^[1-9]+[0-9]*$"
    messageDetailNoMatch="Quantity In Bags must be in whole number format."/>
    <f:validator validatorId="custom.conversionValidator"/>
    </af:inputText>
    </af:column>
    <!-- END of column created by SYSTIME -->
    <af:column sortProperty="quantity" filterable="true"
    sortable="true" headerText="Quantity" id="c3"
    width="60"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive" visible="false">
    <div align="center" >
    <af:inputText value="#{row.bindings.quantity.inputValue}"
    label="#{bindings.queryProductResponseType.hints.quantity.label}"
    required="#{bindings.queryProductResponseType.hints.quantity.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.quantity.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.quantity.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.quantity.tooltip}"
    id="it5" partialTriggers="it19"
    readOnly="#{row.activeYN == 'N' or row.availability &lt; 0 or row.availability ==0}">
    <f:validator binding="#{row.bindings.quantity.validator}"/>
    <af:validateLongRange id="RangeCheck_Val" minimum="1"
    maximum="#{row.bindings.availability.inputValue}"
    messageDetailNotInRange="You have entered a quantity more than is available. Quantity entered must be in the range of {2} to {3}"
    messageDetailMinimum="Minimum {0} allowed is {2}"
    messageDetailMaximum="Maximum {0} allowed is {2}"
    hintNotInRange="#{'Quantity to Order'}"/>
    <af:validateRegExp pattern="^[1-9]+[0-9]*$"
    messageDetailNoMatch="Quantity must be in whole number format."/>
    </af:inputText>
    </div>
    </af:column>
    <af:column sortProperty="brand" filterable="true" sortable="true"
    headerText="Brand" id="c10" width="80"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive" displayIndex="-1">
    <af:inputText value="#{row.bindings.brand.inputValue}"
    label="#{bindings.queryProductResponseType.hints.brand.label}"
    required="#{bindings.queryProductResponseType.hints.brand.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.brand.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.brand.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.brand.tooltip}"
    id="it7" readOnly="true">
    <f:validator binding="#{row.bindings.brand.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="seedsz" filterable="true" sortable="true"
    headerText="Seed Size" id="c7" width="50"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive">
    <af:inputText value="#{row.bindings.seedsz.inputValue}"
    label="#{bindings.queryProductResponseType.hints.seedsz.label}"
    required="#{bindings.queryProductResponseType.hints.seedsz.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.seedsz.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.seedsz.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.seedsz.tooltip}"
    id="it11" readOnly="true"
    contentStyle="text-transform:uppercase">
    <f:validator binding="#{row.bindings.seedsz.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="pckSize" filterable="true"
    sortable="true" headerText="Pkg Size" id="c11"
    width="50"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive"
    inlineStyle="#{row.conversion > 1 ? 'background-color:Yellow;' : 'background-color:White;'}">
    <af:inputText value="#{row.bindings.pckSize.inputValue}"
    label="#{bindings.queryProductResponseType.hints.pckSize.label}"
    required="#{bindings.queryProductResponseType.hints.pckSize.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.pckSize.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.pckSize.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.pckSize.tooltip}"
    id="it8" readOnly="true">
    <f:validator binding="#{row.bindings.pckSize.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="conversion" filterable="true"
    sortable="true" headerText="Conv" id="c4" width="50"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive" displayIndex="-1">
    <af:inputText value="#{row.bindings.conversion.inputValue}"
    label="#{bindings.queryProductResponseType.hints.conversion.label}"
    required="#{bindings.queryProductResponseType.hints.conversion.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.conversion.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.conversion.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.conversion.tooltip}"
    id="conversion_it" readOnly="true">
    <f:validator binding="#{row.bindings.conversion.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="treatment" filterable="true"
    sortable="true" headerText="Treatment" id="c13"
    width="70"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive">
    <af:inputText value="#{row.bindings.treatment.inputValue}"
    label="#{bindings.queryProductResponseType.hints.treatment.label}"
    required="#{bindings.queryProductResponseType.hints.treatment.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.treatment.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.treatment.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.treatment.tooltip}"
    id="it20" readOnly="true">
    <f:validator binding="#{row.bindings.treatment.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="availability" filterable="true"
    sortable="true" headerText="Availability" id="c15"
    width="60"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive">
    <af:inputText value="#{row.availability> 500 ? '>=500': (row.availability> 100 and row.availability&lt;500 ? '100-500' : row.availability) }"
    label="#{bindings.queryProductResponseType.hints.availability.label}"
    required="#{bindings.queryProductResponseType.hints.availability.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.availability.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.availability.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.availability.tooltip}"
    id="it9" readOnly="true">
    <f:validator binding="#{row.bindings.availability.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="desiredDeliveryDate" filterable="true"
    sortable="true" headerText="Desired Delivery Month" id="c2"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive" width="90">
    <af:selectOneChoice id="soc1" partialTriggers="it19"
    unselectedLabel="#{viewScope.GrowerOrderBean.desiredDeliveryDate}"
    value="#{row.bindings.desiredDeliveryDate.inputValue}"
    readOnly="#{row.activeYN == 'N'}">
    <af:forEach var="item"
    items="#{viewScope.GrowerOrderBean.selectItems}">
    <af:selectItem label="#{item.label}" value="#{item.value}"/>
    </af:forEach>
    </af:selectOneChoice>
    </af:column>
    <af:column sortProperty="maturity" filterable="true"
    sortable="true" headerText="Maturity" id="c5"
    width="60"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive">
    <div align="center">
    <af:inputText value="#{row.bindings.maturity.inputValue}"
    label="#{bindings.queryProductResponseType.hints.maturity.label}"
    required="#{bindings.queryProductResponseType.hints.maturity.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.maturity.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.maturity.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.maturity.tooltip}"
    id="it16" readOnly="true">
    <f:validator binding="#{row.bindings.maturity.validator}"/>
    </af:inputText>
    </div>
    </af:column>
    <af:column sortProperty="technology" filterable="true"
    sortable="true" headerText="Technology" id="c14"
    rendered="true" filterFeatures="caseInsensitive">
    <af:inputText value="#{row.bindings.technology.inputValue}"
    label="#{bindings.queryProductResponseType.hints.technology.label}"
    required="#{bindings.queryProductResponseType.hints.technology.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.technology.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.technology.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.technology.tooltip}"
    id="it15" readOnly="true">
    <f:validator binding="#{row.bindings.technology.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="prdLine" filterable="true"
    sortable="true" headerText="Product Line" id="c6"
    width="70"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive">
    <af:inputText value="#{row.bindings.prdLine.inputValue}"
    label="#{bindings.queryProductResponseType.hints.prdLine.label}"
    required="#{bindings.queryProductResponseType.hints.prdLine.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.prdLine.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.prdLine.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.prdLine.tooltip}"
    id="it12" readOnly="true">
    <f:validator binding="#{row.bindings.prdLine.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="brandMktName" filterable="true"
    sortable="true" headerText="Marketing Brand" id="c8"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive" width="80">
    <af:inputText value="#{row.bindings.brandMktName.inputValue}"
    label="#{bindings.queryProductResponseType.hints.brandMktName.label}"
    required="#{bindings.queryProductResponseType.hints.brandMktName.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.brandMktName.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.brandMktName.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.brandMktName.tooltip}"
    id="it17" readOnly="true">
    <f:validator binding="#{row.bindings.brandMktName.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="itemID" filterable="true" sortable="true"
    headerText="Item#" id="c1"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive" width="60">
    <af:inputText value="#{row.bindings.itemID.inputValue}"
    label="#{bindings.queryProductResponseType.hints.itemID.label}"
    required="#{bindings.queryProductResponseType.hints.itemID.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.itemID.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.itemID.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.itemID.tooltip}"
    id="it6" readOnly="true">
    <f:validator binding="#{row.bindings.itemID.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="descp" filterable="true" sortable="true"
    headerText="Description" id="c17" width="105"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive">
    <af:inputText value="#{row.bindings.descp.inputValue}"
    label="#{bindings.queryProductResponseType.hints.descp.label}"
    required="#{bindings.queryProductResponseType.hints.descp.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.descp.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.descp.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.descp.tooltip}"
    id="it10" readOnly="true">
    <f:validator binding="#{row.bindings.descp.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="primaryUOM" filterable="true"
    sortable="true"
    headerText="#{bindings.queryProductResponseType.hints.primaryUOM.label}"
    id="c16" rendered="false"
    filterFeatures="caseInsensitive">
    <af:inputText value="#{row.bindings.primaryUOM.inputValue}"
    label="#{bindings.queryProductResponseType.hints.primaryUOM.label}"
    required="#{bindings.queryProductResponseType.hints.primaryUOM.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.primaryUOM.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.primaryUOM.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.primaryUOM.tooltip}"
    id="it18">
    <f:validator binding="#{row.bindings.primaryUOM.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="secondaryUOM" filterable="true"
    sortable="true"
    headerText="#{bindings.queryProductResponseType.hints.secondaryUOM.label}"
    id="c12" rendered="false"
    filterFeatures="caseInsensitive">
    <af:inputText value="#{row.bindings.secondaryUOM.inputValue}"
    label="#{bindings.queryProductResponseType.hints.secondaryUOM.label}"
    required="#{bindings.queryProductResponseType.hints.secondaryUOM.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.secondaryUOM.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.secondaryUOM.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.secondaryUOM.tooltip}"
    id="it21">
    <f:validator binding="#{row.bindings.secondaryUOM.validator}"/>
    </af:inputText>
    </af:column>
    </af:table>
    <af:spacer width="10" height="5" id="s7"/>
    <af:toolbar id="t1">
    <af:commandButton id="AddToOrderButton2"
    actionListener="#{viewScope.GrowerOrderBean.addToOrder_action}"
    partialSubmit="true"
    styleClass="addToOrderButton">
    <af:clientListener method="setFocus" type="action"/>
    </af:commandButton>
    </af:toolbar>
    <f:facet name="context">
    <af:group id="g1">
    <af:spacer width="60" height="10" id="s1"/>
    <af:commandButton id="cb4"
    actionListener="#{viewScope.GrowerOrderBean.addToOrder_action}"
    partialSubmit="true"
    styleClass="addToOrderButton">
    <af:clientListener method="setFocus" type="action"/>
    </af:commandButton>
    </af:group>
    </f:facet>
    <f:facet name="info"/>
    <f:facet name="legend"/>
    <f:facet name="menuBar"/>
    <f:facet name="toolbar"/>
    </af:panelHeader>
    </jsp:root>
    Please reply !!
    Thanks.

  • How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

    How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
    When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
    Any cure for this ?

    Hi
    In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
    Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
    Bengt W

  • How to stop the option key from changing tools when trying to subtract from a selection?

    How to stop the option key from changing my tools when I am trying to subtract from a selection?
    I'm running CS3 on Mac OS Leopard, and the automatic tool switching slows me down, but even preferences doesn't show a way to turn this off.
    Thanks for your help.

    With any marquee tool, JUST holding down the option key should not switch tools. You need to explain the problem much more carefully, It's completely impossible to tell from your description whats going wrong.
    automatic tool switching
    The only preference related to this, is to do with the SHIFT KEY - "use Shift key for tool switch".

  • How to fill the gaps in SAP Fico configuration

    Hi Guys,
    Can anyone please explain me that how to fill the gaps in SAP FICO implementation project
    Thanks in advance
    Vasu

    Hello,
    Perhaps you might find some useful info here http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/36/f1a5e16cde4121acc69a91728b9082/frameset.htm
    Regards,
    Paul

  • Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

    Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

    Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

  • How to fill the master data in ecc

    Hi,
             0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
    Regrads,
    devi.

    Hi Devi,
    Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data. 
    BDC and LSMW both are used for loading data into SAP system.
    Or ask even directly they can create in ECC.  If it is for your testing purpose, it is better to ask them to create master in source system .
    Thanks
    BVR

  • How to populate the Language Key description is not available

    Hi,
    Question: How to populate the Language Key description is not available in the Customer text table
    The problem is ;
    Customer no : 0012345
    For this Customer no description is maintained only in EN, JA ,FR from R3 side.
    EN : HP International Ltd
    JP:HP &#12398;&#22269;&#38555;&#30340;&#12394;&#26666;&#24335;&#20250;&#31038;
    FR: Ltd International de HP
    There is no value for Language ES.
    BW side:
    User is login into language Key ES and executing the report based on this Customer no. There is no Customer text value maintained in language Key ES. It should populate the text value empty. BW system - Language ES is installed.
    I have a Reporting requirement is - I need to populate the text value for this customer No: HP International Ltd when the user login to language Key ES and execute his reports.
    /BI0/TCUSTOMER – Customer text table – I am able to see the description for the EN, JP, FR text values.
    EN: HP International Ltd
    JP: HP &#12398;&#22269;&#38555;&#30340;&#12394;&#26666;&#24335;&#20250;&#31038;
    FR: Ltd International de HP
    If the Customer text is not available in the text table of customer for language key ES - I have to populate the any one of the existing customer text values into the language key ES - example
    0012345 ES  HP International Ltd
    Simplest solution if we maintained ES customer description in R/3 should be ok.
    Is their any other logic which I can implement in BW.

    Hi,
    If you are opting to load Customer Text, there are two options:
    1. R/3 maintained.
    2. Generic Extraction using Flat Files.
    Hope it helps..
    Regards,
    GPK.

  • How to retrieve the Foreign key information in Oracle

    I want to know how to retrieve the Foreign Key information in Oracle while using SQL Statement?
    I have use three SQL statement to retrieve such information, but the performance is very bad.
    The three SQL Statements are:
    Select constraint_name, r_constraint_name from all_constraints where constraint_type = 'R' and table_name = table1;
    Select column_name from all_cons_columns where constraint_name = cons1;
    Select table_name, column_name from all_cons_columns where constraint_name = r_ccons1;
    Do anyone know another method to retrieve the Foreign Key information which has better performance?

    These sql-statements don't seem very performance intensive. My guess is something is wrong with your database (unless you have millions of constraints). How many constraints do you have? how many concurrent users? What is your dictionary cach hitratio? (other hitratio?) memory problems? other tasks of the computer? is this query the only one being slow? etc.

  • How to fill the "budget" in an initiative in SEM BSC

    Good Afternoon for all!
    We have a Balanced Scorecard implemented in SAP SEM BSC, using SAP BW.
    Our Balanced Scorecard actually manages ratios, objectives, perspectives, strategy and scorecard.
    Now, we are trying to use "iniatiatives" and we have using the SEM BSC wizard, through the web interface.
    When defining the initiative everything goes ok, we define the initiative , and then we assign it to an objective.
    We have also installed the infocube "0SEM_C02" which we have the understanding that it stores the information concerned to initiatives.
    I have also build a SEM BPS layout and planning area for this infocube (0SEM_C02) in order to fill the infocube with information (manually entered).
    But after all these, the information does not appear for the "budget" when displaying the Balanced scorecard.
    When displaying an initiative it displays:
    -Definition
    -Duration
    -Priority
    -Status and score
    -Milestones
    -Team members
    -Objectives
    -Budget (<-----E M P T Y !! )
    I do not understand, how to fill the "Budget" data for an initiative. Because we have fill all the information regarded to the initiative included above, but the budget is very important for us, and as i said before, we have installed the infocube 0SEM_C02, we also created a planning area for this infocube in BPS, we have created a planning layout for this infocube, and we have entered some values to this infocube.
    Is there any special condition or something special to do, in order to fill the budget for an initiative in SAP SEM BSC??
    How can we see in the BSC the budget for an initiative, or fill the value???
    We will appreciate any help for this issue.
    Thanks in advance for your valuable help.
    Carlos Espana
    Cementos Progreso
    Guatemala

    Carlos,
    This is the Forum for SAP Strategy Management.
    There is another Forum specifically for SEM-BSC questions.
    Go to the SAP Community Network Forums > SAP Solutions > SEM-BSC
    Please repost your question there for an answer.
    Regards,
    Bob

  • I create a mobile game. How to get the signing key?

    I create a mobile game. How to get the signing key? Is the certificate is payable? Sorry if the topic is in the wrong section.

    You need to be an iOS/Mac OS X developer.
    https://developer.apple.com/devcenter/

  • How to fill the details tab in tv shows with description

    Can anyone tell how to fill out the details tab metadata in the tv shows section of iPad? The tv shows purchased from the iTunes Store have the details tab beside the episodes tab filled in with helpful description about the show. Isn't there a way to do that manually for personally downloaded tv shows? It's not possible to buy every content from the iTunes Store. Please help if anyone know how to add description to tv show details.

    see your duplicate thread : How to fill the details tab in the iPad tv shows with description

  • How to get the Primary key from  Synonym

    Hi ,
    I want to get the Primary Keys for my tables . I used
    java.sql.DatabaseMetaData databasemetadata = connection.getMetaData();
        ResultSet rs = databasemetadata.getTables(null, null, "%", null);
    rs.next();
        System.out.println(" TABLE_CAT "+ rs.getString(1));
        System.out.println(" TABLE_SCHEM  "+rs.getString(2));
        System.out.println(" TABLE_NAME "+rs.getString(3));
        System.out.println(" TABLE_TYPE  "+rs.getString(4));
        System.out.println(" REMARKS "+rs.getString(5)); gives :
    TABLE_CAT null
    TABLE_SCHEM PROGRESS
    TABLE_NAME ApplicConv
    TABLE_TYPE SYNONYM
    REMARKS null
    Now if I use :
      rs = databasemetadata.getPrimaryKeys(null,"PROGRESS","Applicconv");
      System.out.println("Is result set Non empty "+rs.next()); gives :
    Is ResultSet non empty false .
    Can you tell me why this result is empty? Is it because of my table is a Synonym?
    If it is Synonym how to get the primary key ?

    You can use DatabaseMetaData#getPrimaryKeys.

Maybe you are looking for

  • Month view scrolling?

    It would be great if I could scroll within the month view, rather than jumping from month to month. Is there a way to do this? At least half of the month I am at least as concerned about the upcoming weeks in the following month and would love to be

  • Help with an EtreCheck Report

    I have an older iMac running Yosemite and I just ran the EtreCheck and this the report. I am not sure what it means by "memory pressure" or what the solution is to the issue? Thanks EtreCheck version: 2.1.8 (121) Report generated April 3, 2015 at 11:

  • ITunes duplicating albums and songs

    ITunes is duplicating my albums. The songs are tagged certain, yet iTunes insists on dividing the album into several parts. When I delete the folder "iTunes" library and let iTunes again seeking the songs that are on the computer the problem is solve

  • Mac book pro retina wireless drivers

    I have mbp retina early 2013 (i7, 2.4GHz, 256GB ssd). I wanted to use windows 7 on the same machine. so I installed it but the wireless card was not been recognized (i downloaded and installed bootcamp drivers but nothing). Do you have a solution?

  • Upgrade + Lip sync

    Hi, Has anyone got terrible lip sync issue since the upgrade?? Before it was milliseconds but now its hideously noticeable.