How to Remove in/out port for Test Stand VI

Ok - This is probably something stupid, but i can not really find a basic example to understand what's wrong.
I just want to create a Test Stand VI, that in adition to the basic IO, use extra IOs for configuration for example. Here is what i do
1 - Create a new Pass/Fail VI from Test Stand
2 - LabVIEW start by itself, show my VI
3 - I put a basic "Not" logic, and connect the input to the logic
4 - Save
5 - Reload the Prototype in TS, and here my new input does not shows up.
I do not believe that i can make this any simpler. Could someone explained what is wrong here.
Solved!
Go to Solution.

When you create a VI using the "Create VI" function in TS. Output ports are not connected and still shows up in TS.
I attached the simplest example in the world. What i expect to get in TS after i update the prototype is to have the same output as the initial one + an new input that allow me to control my output flag.
Attachments:
PassTest.vi ‏9 KB

Similar Messages

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

How to use a fixed port for remote assistance in windows 8.1 behind a nat router freebox?

Hello,
Before to use remote assistance in windows 8.1, i need to configure my nat router freebox.
But remote assistance ( msra.exe ) use a dynamique port and never the same.
How to use a fixed port for remote assistance ini windows 8.1 ?
And why i can't use easy connect ?
i read that the router must implement the PNRP protocol. I think it's a propriatary microsoft's protocol unknow on my router.
Thanks

Hello,
Very good. It's a big range ( 255 mini from 49152 ) for a single port but if it's the only one possibility...
You are very helpfull ( i don't know if it's a good english but you make me very happy )
Merci beaucoup

How to specify one ethernet port for network home directories (other for normal filesharing)?

So I'm trying to get Home Directories up and running on a 10.6.8 Xserve (waiting until I get my NFS sharepoints migrated to a Linux server [for other reasons] before moving up to 10.7 Server). But posting here since that will be happening in the next few weeks, and it might be applicable now (so I can at least get that resolved ahead of time).
I have a different DNS entry for each ethernet port: server.office.domain.com at 192.168.0.11 for the first, and homes.services.internal at 192.168.0.10 for the second. DNS lookups for both resolve correctly (as does the reverse lookup).
If I use the Server Admin to pick a sharepoint as an automount for Home Directories, everything is fine, but it picks the server.office.domain.com hostname. Picking that works just fine, but that is also the connection that feeds the filesharing. I'd prefer to split that home directory traffic out onto the second ethernet port. So I tried just duplicating the initial connection (since it can't be edited directly in Workgroup Manager) and changing the hostname to the internal one, but I get an error when attempting to log in (the client login screen gives a very helpful "Couldn't login because of an error" error message) and don't see anything in the server logs.
The client machine shows the following line:
Code:
10/20/12 5:27:42.688 PM authorizationhost: ERROR | -[HomeDirMounter mountNetworkHomeWithURL:attributes:dirPath:username:] |
PremountHomeDirectoryWithAuthentication( url=afp://homes.services.internal/Users,
homedir=/Network/Servers/homes.services.internal/Volumes/HomeDirectories/Users/ user123, name=user123 ) returned 45
(added line breaks so it didn't extend off the page)
So it looks like this is failing because the automount isn't in place, but I'm not sure how to work that out either (i.e. how do I add that making sure it uses the internal hostname?).
Any suggestions on getting this to work?
I realize one solution is just to LACP the two ports, but that is a different ball of wax (I may do that later if I get a 4 port ethernet card and performance limitations demand it).

A possible solution might be this.
On ADSLBOX and CABLEBOX configure different subnets for the LAN, e.g.
ADSLBOX: 192.168.1.0/24
CABLEBOX: 192.168.2.0/24
The MEDIABOX gets these static IPs:
ADSL-LAN: 192.168.1.2
CABLE-LAN: 192.168.2.2
On the MEDIABOX, configure the two network interfaces using two routing tables.
The ADSL-LAN routing table
ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2 table 1
ip route add default via 192.168.1.1 table 1
The CABLE-LAN routing table
ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2 table 2
ip route add default via 192.168.2.1 table 2
The main routing table
ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2
ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2
# use the CABLE-LAN gateway as default, so general internet traffic from MEDIABOX runs over CABLEBOX
ip route add default via 192.168.2.1
define the lookup rules
ip rule add from 192.168.1.2 table 1
ip rule add from 192.168.2.2 table 2
To test the setup:
ip route show
ip route show table 1
ip route show table 2
I don't know how to persist something like this in ArchLinux using netctl. Might require to write a special systemd unit for it. Above is a working example from a RedHat box at my company.
Last edited by teekay (2013-12-04 07:42:22)

How to generate specific traffic types for testing?

Hi all.
Is there a good tool or tools (Windows-based) for generating and testing traffic through specific ports to a remote host? I know what I am asking for but not sure how to put it into the right words, so here' s an example. Normally in a situation where if I set up a router with some NAT and a zone firewall, and want to test whether the outside world can get to a web server internally, I would attach a real web server to the inside interface, set up the rules and policies to reach it, and then test from a laptop or PC attached in some way to the outside (Internet) inteface.
But I don't always have a web server to plug in, and this says nothing about other protocols I'd want to test. For example ntp protocol on udp 123.
So ideally I would take two laptops and install the testing tool on each, plug one into the LAN and the other to the outside thus simuluating some random Internet host, and then they can talk to each other over any port or protocol they allow for and show the results.
Not sure why I can't seem to articulate this very well today but I hope I'm getting the idea across. I'm not looking for a port scanner or something but rather a tool for testing end-to-end success of communication between two systems over an intermediiary device (router), over certain ports or protocols.
Thank you!

I looked over quite a few in there, would still need to download and test. Seems there are a lot of home grown tools by university engineers out there
Unfortunately iperf isn't Windows-based which is what I need for this scenario but it does look very intreesting in itself.
I did find that nmap has nping which employs an echo responder so hopefully it can do more than just icmp. Nonetheless that whole list has very interesting tools which I'll review in more detail when time permits.
Thank you!

Help with figuring out commands for test!

These are study guide questions, I would appreciate any help!!
What does the following PowerShell command do?
PS C:> ls | Where-Object { $.PSIsContainer } | ForEach-Object { (ls $ | ? { -not $_.PSIsContainer } | sort LastWriteTime)[0] }
Select one:
Finds all the files that are one subdirectory deep
Searches one subdirectory level deep and finds the least recently modified file in each subdirectory
Recursively searches for the file named "0"
Searches each subdirectory and finds the most recently modified file
Recursively searches for the newest file on the system
What does the following PowerShell command do?
PS C:> Select-String "[0-9]{10}" audit.log
Select one: Searches for the literal string "[0-9]{10}" and returns each line containing the string
Looks for and returns the first instance of the literal string "[0-9]{10}" in the file audit.log
Looks for and returns each line containing 10 consecutive digits in the file audit.log
Looks for and returns the first number that is exactly 10 digits found in the file audit.log
Looks for and returns a 0-9 followed by a 1 or 0 in the file audit.log
What does the following PowerShell command do?
PS C:> ls -r -fo | ? { $_.LastAccessTime -gt (Get-Date).AddDays(-1) } | select LastAccessTime, Name
Select one: Finds all files, excluding hidden files, accessed in the last day and outputs the last access time and filename
Finds all files, excluding hidden files, accessed in the last day and outputs the last access time and the user
Finds all files, including hidden files, accessed in the last day and outputs the last access time and filename
Finds all files, including hidden files, accessed in the last day and outputs the last access time and the user
Finds all files, including hidden files, accessed more than one day ago and outputs the last access time and filename
What does the following PowerShell command do?
PS C:> Get-Process cmd | ? { $_.StartTime -lt (Get-Date).AddHours(-1) } | Stop-Process
Select one: Kills any cmd.exe process that has been running for longer than an hour
Starts cmd.exe and stops it after one hour
Kills any cmd.exe processes that started exactly one hour ago
Kills any cmd.exe process that has started in the past hour
Starts cmd.exe after pausing for one hour
What does the following PowerShell command do?
PS C:> ls \users\ephil\Documents | % { move $.FullName -dest $.FullName.ToLower() }
Select one: Moves each file in \Users\ephil\Documents to a lower directory
Moves each file in \Users\ephil\Documents to the directory named FullNameToLower
Moves files with all lowercase characters to \Users\ephil\Documents
Finds all files containing the words user, ephil or documents and renames them to lower case
Renames each file in \Users\ephil\Documents to lower case

It really doesn't help you learn if we're giving you the answers to questions. That said, there are a number of places where the code you've posted has syntax errors. Any place you see "$" with nothing after it in that code (ie, "$.StartTime" or "ls $ |",
assume they meant to type "$_" ("$_.StartTime", "ls $_ |").
There are also a lot of aliases and partial parameter names in the code. This may be deliberate, to get you to play around with the commands and figure out what the cryptic notation really means, but I don't think it's very helpful. We encourage
people to use full command and parameter names in scripts to enhance code clarity; the same standard should be applied to your test questions. Aliases are an optional convenience if you want to save some typing, once you're comfortable with them.
So, here are the aliases used in your questions, along with their actual command / parameter name:
% : ForEach-Object
? : Where-Object
ls : Get-ChildItem
sort: Sort-Object
select: Select-Object
move: Move-Item
-r: (as a parameter to ls / Get-ChildItem) -Recurse
-fo: (as a parameter to ls / GetChildItem) -Force
-dest: (as a parameter to move / Move-Item) -Destination
Yes the $_. turned out as $. for some reason.
Could you help me with any of these questions? They will really prepare me well for the test. If you could provide answers for any of them I could then work backwards and figure out how to arrive at the answer.

How to set the debug port for Eclipse for OracleAS 10g Enterprise

Hello All,
I am using OracleAS 10g Enterprise, and using dcmctl to startup the server.
But i do not know how to set the debug port in the startup script for debugging with Eclipse.
I have tried to add the following options to the dcmctl.bat, but still failed:
-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=4000
i.e in the dcmctl.bat script:
set jvmargs=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=4000
set ex=%ohome%\jdk\bin\java -Djava.net.preferIPv4Stack=true %jvmargs%
Do anyone know how to configure the debug port setting?
Thank you for your great help!.

Hi, have you double checked that your oc4j is started with Sun's JVM or any other JVM that recognizes the kind of remote debug option as above? You can find the JVM used by oc4j in the ORACL_HOME/opmn/conf/opmn.xml.
To double check that your oc4j is started in debug mode, you can test with another remote debugger. Say, with the jdb in sun's jdk jdb -connect com.sun.jdi.SocketAttach:hostname=yourHost,port=4000 (Personally, I also use Jdeveloper or Jswat to double check.) If you can connect with jdb, then you have to check your Eclipse. Can its remote debugger connect to any java application at all?

How can I redirect a request for testing?

There is no internet access on the development machine and I have written for testing purposes a servlet to simulate a web server that my app accesses.
However I need a program or way of redirecting a (secure and non-secure) url request to the local host.
i.e. the application calls either:
http://www.thewebsite.com/foo?bar=1
or
https://secure.thewebsite.com/foo?bar=1
which is then redirected to:
http://localhost/thewebsite/foo?bar=1
How can this be done?

Hi, thanks for the replies. I thought about that
(it's a windows machine) but there is still a couple
of problems.
1. I can't specify the sub-directory can I?No, but your webserver can prob. do that.
2. I want to handle a secure request but have it also
go to the same locationssl would have to go to ssl. But setting up ssl normally is not too hard.

How to use non-standard port for vnc?

Our Windows users who use RDC to connect to their desktops from off-site come in on a non-standard port number. Part of our security setup.
I'd like to do the same with Mac users who use screen sharing and vnc to connect remotely.
How can I specify another port number at both ends to accomplish this?
I can find nothing in the Network Utility app, or in the KB.
Surely there's a short sequence of Terminal commands that will do this?

I haven't tried this so don't know whether it will work. But I think it will. Presuming the target machine is a Mac, see if editing its /etc/services file will do it. Find the two lines that start with "vnc-server" and change the port number there. Launch Terminal.app as an administratively privileged user, sudo pico /etc/services, ^w to search for vnc-server, make the changes, ^x to exit, y to save and overwrite. Also, you will need to have screen sharing enabled in the target machine's System Preferences' Sharing, and the authorized users defined there, too. Reboot. Now, on the remote client, assuming it is also a Mac, the user would type ⌘k in the Finder (or mouse to Finder > Go > Connect to Server), and enter something like vnc://123.45.67.89:55900 where you substitute the actual IP address or host name for where I have entered 123.45.67.89, and where you substitute the actual alternate port number where I have entered 55900. Of course, in the clients' Screen Sharing's Preferences, they should choose to encrypt the entire session, not just the login. Like I said, I haven't tried this because I just tunnel my vnc stuff through ssh, but I'm thinking that this should work.

How can i find out field for a particular component type

hi,
how can i find out for particular component name is belongs to this field.....that means REF_DOC_NO componemt is belongs to xblnr field ..../.if we know only component type ...how to find the field...
plz tell me
thanks&regards,
kalyan

keep the cursor on component
press F1
select technical information
you will find the field name and table or structure name
regards
sateesh

How to remove the note text for column (portal)

Hi to All,
Just i wanted to know how to remove the note (text) which is coming infrond the column in the appraisal template in portal view.
My client doest want the text "note" (which i highlighted in the yellow) comming infrond the coulum. Pls can anyone tell me how can i remove only the "note" text from the template?
Kind regards,
Saritha

Hi Saritha,
In SE80, Choose Web Dynpro Component HAP_DOCUMENT_BODY and you will find the component controller node, double click it and goto methods tab. Here you can find the method CONVERT_CONTEXT_TO_UI, this method will be triggered twice. Search for the code "CALL METHOD lo_nd_t_cells->get_static_attributes_table", this is the method which defaults the "Note" based on the row and column iid. You can overwrite the code by writing the implicit enhancement.
Hope it will help you and revert back in case of queries.
With Regards,
Giriesh M

SQL Server 2012 - 3 SQL clustered instances - one default/ two named instances - how assign/should assign static ports for named instances

We have two physical servers hosting 3 SQL 2012 clustered instances, one default instance and two named instances.
The default instance is using port 1433 and the two named instances are using dynamic port assignment.
There is discussion about assigning static port numbers to the two named clustered SQL instances.
What is considered best-practice? For clustered named instances to have dynamic or static ports?
Are there any pitfalls to assigning a static port to a named instance that is a cluster?
Any help is greatly appreciated

Hi RobinMCBC,
In SQL server the default instance has a listener which listens on the fixed port which is TCP port 1433. And for the named instance the port on which the SQL server listens is random and is dynamically selected when the named instance of the SQL server
starts.
For Standalone instance of the SQL server we can change the dynamic port of the named instance to the static port by using SQL server configuration manager as other post, however, in case of the cluster, when we change the port no. of the named instance
to the static port using the method described above, the port no. again changes back to the dynamic port after you restart the services. I recommend you changing the Dynamic port of the SQL Server to static port
on all the nodes , disabling and enabling the checkpointing to the quorum.
For more information, you can review the following article about how to change the dynamic port of the SQL Server named instance to an static port in a SQL Server 2005 cluster.
http://blogs.msdn.com/b/sqlserverfaq/archive/2008/06/02/how-to-change-the-dynamic-port-of-the-sql-server-named-instance-to-an-static-port-in-a-sql-server-2005-cluster.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How can I sign my .sis for testing purposes?

Hi, I created a simple helloworld.sis application using the
Adobe Mobile Packager. Now I want to install it to my Nokia S60
phone, but I get the following error message: "certificaatfout"
(it's dutch, meaning certificate error ;-).
I tried Open Signed Online to sign my application
url:
https://www.symbiansigned.com/app/page/public/openSignedOnline.do
but after submitting my application I get this error by
email:
Your application (HelloWorld_signed.sis) signing has failed.
This may be because it has been flagged as a potential virus by our
scanning or because the format of your sis file is incorrect or
corrupt. Please try re-building your .sis file and
re-submitting.
Does anybody know how I can sign my application to test it on
my Nokia phone?

Hi Mark, thank you for the tip. In "Applications->App
Manager>Options>Settings>" I enabled all applications and
no online checks and now I can install my HelloWorld_signed.sis.
Unfortunately, when I try to run my application, my phone
asks:
"HelloWorld needs Adobe Flash Lite to Run. Continue?"
But when I click "yes", I get this message:
"Sorry. Adobe Flash Lite is not available for this device."
I'm using a Nokia E61i. In the Adobe Mobile Packager, this
device is not listed under "Distributabele Player Supported
Devices" so I guess I have to borrow a more up-to-date phone to see
my application running.

How to set up approval process for test case in SAP solution manager?

Hi Experts,
We need to setup a 2 level approval process for test case documents in SAP Solution Manager.
e.g. If test case document is uploaded for transaction "MM01" then first it will go to Reviewer1. Once Reviewer1 approves it , should go to Reviewer2.
Adn finally once reviewer2 approves it , it will be complete.
What are the required configurations and steps for approval process setup? It will be helpful if screenshots and detailed steps are provided.
Thanks.
regards,
Sanjana

Hi,
the above requirement we are going develop add on.below code is there. in this code how we can set for line level amount instead of document total amount
Private Function GetCondition(ByVal sCondition As String) As ApprovalTemplateConditionTypeEnum
        Try
            Select Case sCondition
                Case "Deviation from Credit Limit"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromCreditLine)
                Case "Deviation from Commitment"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromObligo)
                Case "Gross Profit %"
                    Return (ApprovalTemplateConditionTypeEnum.atctGrossProfitPercent)
                Case "Discount %"
                    Return (ApprovalTemplateConditionTypeEnum.atctDiscountPercent)
                Case "Deviation from Budget"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromBudget)
                Case "Total Document"
                    Return (ApprovalTemplateConditionTypeEnum.atctTotalDocument)
            End Select
        Catch ex As Exception
            MsgBox(ex.Message())
        End Try
    End Function
Please guide me.
Regds,
Samapth Kumar.

How to forward the same ports for multiple IPs?

Hi all, I just bought a Linksys WRT54GS router and I would like to forward the same set of ports for two different computers on my network (192.168.1.101 and 192.168.1.3) however when I try to, I get a "Port Overlap" error. Is there another way I can do this? I am trying to set up Age of Empires II. Thanks for any help!

No. You cannot forward the same port to two different computers (or IP addresses).
Here's the reason why:
You and your friend are both playing the game online. You score 1000 points. Your friend scores 10 points. The signal to increase your score 1000 points arrives on port 3078. Which computer is the router supposed to send this signal to? Both computers?   No way!
Most online games have a way to assign different ports to different computers. For example, you might use ports 3075 thru 3078, while your friend uses ports 3175 thru 3178. If your game is setup this way, it should work.
Also, you will want to forward ports to a fixed LAN IP address. In your WRT54GS, note that any fixed LAN IP address must be outside the DHCP server range, and it cannot end in 0, 1, or 255.   So the 192.168.1.101 address is probably an illegal fixed LAN IP address.
Here are all the Linksys rules for using fixed LAN IP addresses:
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.
Typically, when I setup gamers, I put thier fixed addresses all together at 192.168.1.21 , 192.168.1.22, etc.   But you can use any legal fixed addresses that you want.

How to Remove in/out port for Test Stand VI

Similar Messages

Maybe you are looking for