How to remove multiple log in ID'a in e-mail sign in window?

When I type in my e-mail ID Firefox opens all other options drop down of all e-mail that are incorrectly entered in the past. How do I delete all other e-mail errors entries from the SIGN IN window to Yahoo e-mail?

See:
* http://kb.mozillazine.org/Deleting_autocomplete_entries
* http://kb.mozillazine.org/Password_Manager

Similar Messages

How to restrict multiple log-ins by same user in SAP BO 4.0

Hi ,
Facing licence issue Due to subjected error .
How to restrict multiple log-ins by same user in SAP BO 4.0
Thanks in advance .

Then I would say it is not possible: Restrict multiple login in SAP Business Objects 4.0 SP6 for single user
multiple login disable in BO | SCN

How to remove multiple copies of plug ins in CS3 AE

Does anyone know how to remove multiple copies of certain plug ins from Adobe After Effect CS3 ?
I have Adobe Premier Pro CS3 instaled on same hard drive as AE CS3 , when i start my Adobe AE CS3, then when its loading, a warning message comes and says " you have mulitple copies of these plug ins , you must remove the multiple copies, else it might not function properly "
Thanks in Advanced !

Ok, thanks buddy
well, here is the situation
I use Windows XP
AE CS3 as well as premier Cs3
right at this point of time, i am upgrading the motherBD of my PC so i couldn't be more specific..once i installed the new BDs then i can give you more details..
all right, I have installed the trapcode and New Blue effect for both Premier and AE, the dublicate plug in is from New Blue , i guess its called "Essentials"
so, i went inside AE plug ins folder and located the "Essentials" plug in and removed the folder "Essentials" which contains the names of plug ins which i received them at the begining of the program.
but when i restart the AE , i don't get and error or warning signs anymore BUT when i try to look for the Essentials effect, where all the other effects are, i no longer see the plug in there, just like it was never installed to begin with...
when i goto Program Files>>Adobe>>Commen Files>> plug ins
then i see the Essentials plug ins there,
so basically i see the Essentials plug ins in 2 different locations.

HT2500 Does anyone know how to remove a group from the address panel in mail?

Does anyone know how to remove a group from the address panel in mail?

I haven't seen too many questions like this on this forum. Did you also try the photoshop forums?

How to remove all log files at application end ?

I need to remove all log files from database dir.
Just the data file must be in database diretory after the application ends.
I´v tried:
1 - set_flags(DB_LOG_AUTOREMOVE, 1);
2 - txn_checkpoint(0, 0, DB_FORCE);
But ways one log file reminds.
Any bory nows how remove all log files at application end ?
I really need this. How can i do that in C++ ?
Thanks,
DelNeto

Here's how I solved it
// At end of app.
// Commit tables.
pdbParam     ->sync(0);
pdbUser     ->sync(0);
// Close tables.
pdbParam     ->close(0);
pdbUser     ->close(0);
// Delete table objects.
delete     m_pdbParam;
delete     m_pdbUser;
// Commit all changes to the database.
penvDbEnv->txn_checkpoint(0, 0, DB_FORCE);
penvDbEnv->close(0);
delete penvDbEnv;
// Remove all logs files comes here.
DbEnv *penvDbEnv;
penvDbEnv = new DbEnv(0);
ui32EnvFlags = DB_CREATE |
DB_PRIVATE |
DB_INIT_LOCK |
DB_INIT_LOG |
DB_INIT_MPOOL |
DB_THREAD |
DB_INIT_TXN;
// Open the environment with full transactional support.
iResult = penvDbEnv->open("..\\database", ui32EnvFlags, 0);
// Get the list of log files.
char **pLogFilLis;
char **pLogFilLisBegin;
iResult = penvDbEnv->log_archive(&pLogFilLis, DB_ARCH_ABS | B_ARCH_LOG);
// This line resets the log sequence numbers from the database file.
// No actual log file is associated with the database.
iResult = penvDbEnv->lsn_reset("..\\database\\DATABASE.db", 0);
// Remove the log files.
if(pLogFilLis!= NULL)
// I don´t now how put spaces and tabs here, sorry about the "___".;-).
__for(pLogFilLisBegin = pLogFilLis; *pLogFilLis != NULL; ++pLogFilLis)
____iResult = remove(*pLogFilLis);
__free(pLogFilLisBegin);
// At this point no more log files exists at database directory.
penvDbEnv->close(0);
delete penvDbEnv;
// If i need remove the environment files, do this.
penvDbEnv = new DbEnv(0);
penvDbEnv->remove(("..\\database", 0);
delete m_penvDbEnv;
Thanks to Bogdan Coman for show me the way
DelNeto.

How to remove multiple rows from table

Hi All,
in my application iam using two tables,
this is my code
int selection = wdContext.nodeA().getLeadSelection();
String num = wdContext.nodeA.geAAt(selection).getV_Num();
     for(int b=0;b<wdContext.nodeVn_Context().size();b++)
                                                  if(wdContext.nodeVn_Context().getVn_ContextElementAt(b).getVa_num().equalsIgnoreCase
                                                  (num))
                                                       wdContext.nodeVn_Context().removeElement(wdContext.nodeVn_Context().getVn_ContextElementAt(b));
here Vn_Context is having 4 rows, i mean size of Vn_Context is 4. when i use this code to remove that 4 rows based on the condition, which i gave in if, its able to remove only one row, so how to remove those four rows, is this code correct or not, please help me.

Hi sushma,
if you have 4 row then why should you give the condition for removing rrow..because when you gave condition the depends on your lead selection of getVa_num().so you will return perticullar row of getVa_num(). value of lad selection ..this would not match of other row value(getVa_num().so it will remove only that value of lead selection of getVa_num().
better you remove taht condition.
int selection = wdContext.nodeA().getLeadSelection();
String num = wdContext.nodeA.geAAt(selection).getV_Num();
for(int b=0;b<wdContext.nodeVn_Context().size();b++)
//if(wdContext.nodeVn_Context().getVn_ContextElementAt(b).getVa_num().equalsIgnoreCase
//(num))
wdContext.nodeVn_Context().removeElement(wdContext.nodeVn_Context().getVn_ContextElementAt(b));
no need to give the condition right now..
if you want to remove multiselection row,i mean selected row for multiple then you select the row as per your rows delete.
for(int b=0;b<wdContext.nodeVn_Context().size();b++)
if(lead==b || wdcontext.nodeVn_Context().isMultiselection(b){
wdContext.nodeVn_Context().removeElement(wdContext.nodeVn_Context().getVn_ContextElementAt(b));
this way you do solve your problem..
thanks
jjati

How to Remove "CleanApp Logging Services" Pref Pane?

I use Mavericks OS 10.9.2. I've followed the instructions on how to completely remove "CleanApp" from my Mac. I'm stuck on Step 12. which says: "If you have installed the System Preferences pane as well, you also have to delete it from the Mac OS X system preferences. Just do a RIGHT CLICK on the menu item and select Remove "CleanApp Logging Services" Preference Pane." I've clicked on the "CleanApp Logging Service" Icon at the bottom of the System Preferences window. (Please see Picture 1 and Picture 2).
I use a mid - 2012 Mac Pro with a cordless mouse. How do you "right click" on my mouse? I need help on completing "Step 12," mentioned above. What should I do?

You might want to try Control & click (that is the Control key) to open a contextual menu; hopefully, the command referenced will be available.

Does anyone know how to remove multiple wireless profiles?

Interestingly enough, I recently setup a new computer with the same itunes library as my old computer which I moved to another part of the house. I renamed BOTH libraries from their previous names. These are both iMacs. Now, all my iOS devices (iphones/ipads/etc.) show up on BOTH and wirelessly sync to BOTH! So, I turned off wireless sync on one of the machines but the devices still show up in the menu. Also, on the devices themselves both libraries show up as available to sync. Does anyone know how to remove the wireless capabilities from one computer or device so the devices just sync with a single library?

The instructions that are on reedcorner are great, however if you wish to do things in a simpler way; I have created an Automator workflow that can take you through the process. You can download it here: https://public.me.com/edson.ajj

How to select multiple logs in Transaction Code SLG1

Hi all,
I have application log, it is working fine but i need to select multiple logs to download. it has the facility to download one log file at time. but i need to select multiple logs to download. can any one suggest or give some piece of code or information is advantageous.
Thank you
Regards
Ravi.Golla

Hi all,
I have application log, it is working fine but i need to select multiple logs to download. it has the facility to download one log file at time. but i need to select multiple logs to download. can any one suggest or give some piece of code or information is advantageous.
Thank you
Regards
Ravi.Golla

How to remove multiple Birthdays in Calander in icloud com

How can I remove the multiple Birthday per person from iCloud Calendar on my PC

See:
* http://kb.mozillazine.org/Deleting_autocomplete_entries
* http://kb.mozillazine.org/Password_Manager

How to remove archive log files from ASM managed 11g R2 database?

Hi,
I am planning to automate deletion of older archive log files from my 11g R2 Production instance which is ASM managed.
Also want to remove the archive log files files from standby database.
Please provide your inputs on how can I remove the older archive log files.
Regards,
Avinash

Greetings
Did you check RMAN,
RMAN>show all;
CONFIGURE RETENTION POLICY . . . .
CONFIGURE ARCHIVELOG DELETION POLICY TO [CLEAR | NONE | APPLIED ON STANDBY];
DELETE NOPROMPT EXPIRED ARCHIVELOG ALL;
DELETE NOPROMPT ARCHIVELOG ALL COMPLETED BEFORE 'SYSDATE-10';
This will be part of your RMAN Backup scripts/process
Check the urls below:
11gRel2:
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmmaint.htm#BRADV90079
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmmaint.htm#BRADV89634
10g:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14193/toc.htm#sthref45
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmconc1.htm#i1008093
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/maint003.htm#sthref712
Regards & Thanks
BN

How to remove archive log files using Enterprise Manger

Hi,
I took backup of the archive log files and i deleted those files at OS level but it is not reflecting in the Enterprise Manager it is showing the same. Can any one help in how to delete the archive log files by using Enterprise Manger.
version 10.2.0.1.0
any help is appreciated.
Regards,
Ashraf

I have the same problem. I have 10gr1 and 10gr2 on different servers. On 10gr1, under administration/manage current backup/image, I can see archivelog files, and can mange them. But on 10gr2, the image doesn't show archivelog files. I can only remove them using rman. I wonder if it's because the different design on 10gr2 or I missed something when setup the backup?

How to remove multiple selections button in LDB selection screens

Hi Friends,
I am facing a problem while doing an HR object. I took an LDB with Selection screen '100'. i got the company code select-option in it. But i need to avoid multiple selection button so that i have to take only a single company code to print the ALV heading as the company Text. Please tell me quickly, how can i do it.
Regards,
Santosh.

You may have to do something like below where S_BUKRS is your company code select option of the LDB.
REPORT zakstest1 NO STANDARD PAGE HEADING.
TABLES t001.
TYPE-POOLS: sscr.
SELECT-OPTIONS s_bukrs FOR t001-bukrs.
INITIALIZATION.
*-- Remove the the ranges option
PERFORM remove_ranges_for_sel_options.
*&      Form remove_ranges_for_sel_options
*       text
FORM remove_ranges_for_sel_options.
DATA: optlist TYPE sscr_opt_list,
        restrict TYPE sscr_restrict,
        ***      TYPE sscr_***.
*-- Allow EQ only
CLEAR optlist.
optlist-name       = 'EQ_ONLY'.
optlist-options-eq = 'X'.
APPEND optlist TO restrict-opt_list_tab.
CLEAR ***.
***-kind    = 'S'.
***-sg_main = 'I'.
***-sg_addy = 'N'.
*-- Make S_BUKRS range to have only EQ
***-name    = 'S_BUKRS'.
***-op_main = 'EQ_ONLY'.
APPEND *** TO restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
    EXPORTING
      restriction            = restrict
    EXCEPTIONS
      too_late               = 1
      repeated               = 2
      selopt_without_options = 3
      selopt_without_signs   = 4
      invalid_sign           = 5
      empty_option_list      = 6
      invalid_kind           = 7
      repeated_kind_a        = 8
      OTHERS                 = 9.
ENDFORM.                    " rem_ranges

How to remove multiple components border inside a single table column cell

Hi,
I'm adding multiple components to a table cell. To provide a good layout I'm using the following component hierarchy in a table column - table-->groupPanel--> gridPanel-->staticText Components 1 ..2 ..3. Now when I do preview in browser or run the app, the table shows up fine, but textComponent s(1,2,3) in the column are each surrounded by a border (which is the width of gridPanel border). Is there a way to get rid of this border?
This only occurs when you add multiple components in table cell, under gridpanel layout component.
I've tried searching for a way to remove the grid pane layout component border but couldn't find any info. Used style class border setting to not set but that doesn't help either. I checked forums, tutorial, learning sections etc., but no success. Any help or direction is appreciated..
Thanks
-Vinod

Hi ,
Can you please post the query ..what u have tried ...
SQL> select sub from coa1;
SUB
XY
XY
XY
XY
XY
HXY
HXY
HXY
8 rows selected.
SQL> select obj from coa1;
OBJ
AM
AM
AM
AK
AK
AK
ATK
ATK
8 rows selected.
SQL> SELECT OBJ FROM COA1
2 UNION ALL
3 SELECT SUB FROM COA1;
OBJ
AM
AM
AM
AK
AK
AK
ATK
ATK
XY
XY
XY
OBJ
XY
XY
HXY
HXY
HXY
16 rows selected.
SQL> insert into coa2 (obj)
2 (
3 SELECT OBJ FROM COA1
4 UNION ALL
5 SELECT SUB FROM COA1
6 );
16 rows created.
SQL> select * from coa2;
OBJ SUB MCU DOC F
AM
AM
AM
AK
AK
AK
ATK
ATK
XY
XY
XY
OBJ SUB MCU DOC F
XY
XY
HXY
HXY
HXY
16 rows selected.
SQL>
i tried the same it worked fine .....
so u can combine select and insert statements .. you can get the required result.....!
Thanks
Ananda
Edited by: Ananda on Feb 2, 2009 7:38 PM
Edited by: Ananda on Feb 2, 2009 7:52 PM

How to remove multiple Unarchivers from Context menu

Hi,
I am running Mountain Lion on a late 2011 MBP. Every time I upgrade Unarchiver, it creates a new line item in the context menu. How can I get rid of all but the latest one and how can I prevent this from happening? This seems to be a problem with Unarchiver only, the other Apps don't have this issue. Screenshot attached for reference.
Thanks in advance for your time.
Abhijit

That's LaunchServices. These are only cache files but can get corrupted. Launch /Utilities/Terminal and copy & paste this at the command line to rebuild LaunchServices: (be sure to copy the entire line it's a scroll)
Code:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Then press return. Wait until terminal returns to the command line. Quit Terminal. After that, log out and back in or restart. Let us know.
Or, use the free utiltiy OnyX to do the same via gui
EDIT: Actually the issue may be with the way unarchiver code is written and LauchServices is doing it's job correctly. But it can't hurt to see.

How to remove multiple log in ID'a in e-mail sign in window?

Similar Messages

Maybe you are looking for