How to remove page breaks in converted document

This is probably more a Microsoft Word problem, but it started out as an InDesign document, so I thought it wouldn't hurt to post the question here in case someone else has encountered a similar problem.
I formatted an epub on Amazon for my job. Since I am more familiar with InDesign, I used it along with Amazon's script to turn it into an epub.
Since then, I've noticed the cover has inexplicably rotated 90 degrees on Amazon. I asked about it in Amazon's forums, and they said InDesign isn't really reliable for epubs.
So I'm trying to recreate everything in Word. The original Word document isn't up to date with all the editing and corrections I did, so I exported each InDesign chapter document into a PDF, then used Adobe Acrobat to save each PDF as a Word document.
Some of the resulting Word documents seem to be littered with multiple page breaks and/or section breaks. I'm able to delete most of them, but some of them fall right in the middle of a sentence and won't delete. I've selected the paragraph icon in the ribbon to turn on invisible characters, and I can't see a page or section break indicated in most of these breaks.
Anyone know what might be causing these and how to delete them?
Maybe I should just copy everything from my InDesign documents and paste them into Word instead?

Hello,
If your reports is executed in the MODE CHARACTER , the "Page Break" generaed in the output is the one defined in the prt file
Code Name : after page
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/files/printing/printer_def_file_syntax.htm
regards

Similar Messages

  • How to control page breaks in PDL documents

    We have a strange output in our Purchase Order that prints all but the last line on the same page.  The last line goes to the next page (usually page 2).
    How do I remedy this in the document structure?  I can't determine what's causing the document to print in this manner.

    ok this seems to be it along with an "Area: End of Report" section at a height of 229. 
    then how do you change the footer?  i've tried to change the Footer without taking all of the objects off?  on resizing the area i snaps back to the original dimension height.

  • How to put page break in SMARTFORMS

    Hi Guys,
              Can anyone please let me know How to put page break in SMARTFORMS
    Regards
    Avi

    Hi,
    Look at the below thread, you will get the answer
    https://www.sdn.sap.com/irj/sdn/profile?userid=2522810
    Regards
    Sudheer

  • How to put Page break in SAP Script

    Hi Experts,
    Please tell me how to put page break in SAP Script. or give some sample code
    looking forward for your reply..
    Regards,
    Kali Pramod

    Hi,
      NEW-PAGE is used to insert a page break ,
      it can be conditional if used between IF..ENDIF
      e.g. /:IF &KNA1-NAME1& = 'XYZname'
            /:NEW-PAGE
           /:ENDIF
      If u want to Page break after displaying certain records or after some condition you use NEW-PAGE
    reward if useful.

  • How to avoid page break up in background

    hi all,
              i have developed new report i don't given page break statement .. in foreground it s coming correct  without any page break..
    when i have  schedule in background page break is coming please let me know how to avoid page break in background process.
    regards ,
    santosh
    Edited by: santosh jajur on Jul 8, 2009 12:16 PM
    Edited by: santosh jajur on Jul 8, 2009 12:46 PM

    Hi,
    When you view the output from the report run in batch you are presumably looking at the spool output.  Because you are viewing a preview of what is sent to the printer the spool applies page breaks based on the printer parameters.  When you run the report in dialog you view the report on the screen, and the spool is not involved, so no page breaks.
    If you print your report in dialog then review the spool you'll find it has the page break just as the background run has.
    Regards,
    Nick

  • How to insert Page Break in SPOOL file

    How to insert Page Break in SPOOL file.

    How to insert Page Break in SPOOL file.
    SET NEWP[AGE] {1|n|NONE}
    SET NEWPAGE is not supported in iSQL*Plus
    Sets the number of blank lines to be printed from the top of each page to the top
    title. A value of zero places a formfeed at the beginning of each page (including
    the first page) and clears the screen on most terminals. If you set NEWPAGE to
    NONE, SQL*Plus does not print a blank line or formfeed between the report pages.
    http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a90842/ch13.htm
    SQL> SET PAGESIZE 5
    SQL> SET NEWPAGE 0 --a form feed between your pages
    SQL> SPOOL C:\output.doc
    SQL> SELECT * FROM emp;
         EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
          7369 SMITH      CLERK           7902 17-DEC-80        800          0         20
          7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
          7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
         EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
          7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
          7698 BLAKE      MANAGER         7839 01-MAY-81       2850          0         30
          7782 CLARK      MANAGER         7839 09-JUN-81       2450          0         10
         EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
          7788 SCOTT      ANALYST         7566 09-DEC-82       3000          0         20
          7839 KING       PRESIDENT            17-NOV-81       5000          0         10
          7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
         EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
          7876 ADAMS      CLERK           7788 12-JAN-83       1100          0         20
          7900 JAMES      CLERK           7698 03-DEC-81        950          0         30
          7902 FORD       ANALYST         7566 03-DEC-81       3000          0         20
         EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
          7934 MILLER     CLERK           7782 23-JAN-82       1300          0         10
    13 rows selected.
    SQL> SPOOL OFFKhurram

  • How to set page break for Narrative view???

    Hi All,
    I have created a report in Narrative view using HTML code. I am stuck how to set page break based on a column in Narrative view. If anybody is aware of the issue pls let me know how to overcome this situation. Or if this can be done using HTML code itself pls let me know how to do it.
    Thanks & Regards
    Thenmozhi

    Hi Honey,
    I am not sure on ur requirement but you can achieve page break with a column using pivot view by dragging that column into section area and editing section properties to Insert Page break option.

  • How can I remove Page Break Views?

    This is driving me nuts -- I'm just trying to write basic text, and yet, for some reason, Pages forces me to view a page as if it's a real piece of paper. As I'm writing, and come to the end of the page, there's two inches of white space from the end of the last sentence on the page to the start of the first sentence on the next page.
    I find this distracting . . . I'm trying to type a sentence and I don't need to have a massive visual break interrupting the flow of writing. I can't find any way to turn off this view. Not that I want to, but why can't I type one continuous paragraph that could span multiple pages -- without being limited to the freakin' "page" metaphor of viewing?
    I'm so frustrated with this that I think I'm going to have to go back to using MS Word. I'm trying hard to learn Pages, but when I have to knuckle down and write, I'm constantly getting interrupted by the page breaks. While I might be able to train myself to ignore the page break, each time I get to the bottom of a page, I effectively lose two inches of vertical space, which means I can't see as much text above and below what I've just written. It's maddening!
    Does anyone have any solutions? Or is this just an astounding oversight on the part of Apple development?
    I can manually reduce the margins, but I still get the big gray line separating pages at least a vertical inch of separation, plus, if I send the document to anyone else who might want to print it, I have to remember to change the margins back.
    Right now, I'm leaving Pages and finishing my project in MS Word. Please help me come back to Pages! . . . .

    tyronehowe wrote:
    I understand what Yvan KOENIG is saying but, with respect, that simply does not make sense to me.
    My old friend AppleWorks work with separated pages since 1991 and it seems that it is OK for its users.
    Pages is a component of the AppleWorks successor so it seems logical that its designers made the same choice.
    You wrote:
    Whatever justification is given, it is simply a deliberate feature omission.
    Sure it is a deliberate choice.
    As always, the engineers apply this chapter of the Human Interface Guidelines
    +Apply the 80 Percent Solution+
    +During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution—that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.+
    +If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.+
    I assumes that you are in the 20% dropped.
    You wrote:
    As much I hated to admit it, I wanted the “normal” view that Microsoft Word gave me (sometimes known as “toilet-paper” view).
    Now I know why I dislike this view: I never write on "toilet-paper"
    If you are really annoyed with the choices made by Apple, you may build your own template.
    It requires a few seconds to define one with these settings:
    You wrote:
    I have requested this as a new feature to Apple several months ago.
    Then, cross your fingers, and wait _at least_ for iWork'09
    Yvan KOENIG (from FRANCE jeudi 5 juin 2008 20:15:03)

  • How to make form a single long page; remove page breaks?

    Hi. I am pretty new to liveCycle but really like it so far! I think these forums are great too. I did a few forums searches and couldn't find a specific answer to this question, so I began this discussion. Please forgive my ignorance if this is has been discussed before!
    I am trying to make a form that isn't intended to be printed. I would like to make it a single long page instead of having page breaks in it. I have experimented with custom page sizes and way able to make the pages longer, but there is a limit to how long liveCycle allows me to make the pages... like 27" or something. I'd like to have no page breaks at all.
    I am not very familliar with XML, but do have some HTML experience, so I could copy/paste some code to the XML sheet if need be-- provided I was told where to put it.
    I attached a bit of the form I would like to turn into a single page to this discussion.
    Any help at all would be greatly appreciated! Thank you very much!

    In teh hierarchy view - click on the Master Page/ Page1. Now on the object palette on the Master Page Tab you can choose a Paper Type. If you scroll to the bottom of the list you can choose a Custom size. The width and height dimensions are now available to you. The UI in designer limits you to 59 in. If you need more than that there is a way to get bigger but you have to do it in the native XML format. Let me know if you need more than that. Here is a modified sample.
    Paul

  • Remove page break

    How do I remove a page break in a PDF using Acrobat Pro?  My document has two cropped pages and I want it all on one page.
    Is my only option to convert the file to Word and do it there?

    To add just a bit, Acrobat does not have the type of editing capabilities as you are mentioning. So the workaround that was mentioned is one way of doing what you want.

  • How to create page breaks in numbers?

    How do I create page breaks in iCloud Numbers?   The spreadsheet I created is 4-5 pages long, but it saves as one long scrolling document, and when it prints, all 4-5 pages are seen (very small, unreadable font) on a single page.  Any ideas?
    Thanks!
    Dave

    This excel feature is not exactly available in Numbers.
    Here we may create up to 255 sheets in a document. They are reachable from the thumbnails area.
    And each sheet may embed up to 255 tables also reachable from the thumbnails area.
    Think different or use Excel !
    Yvan KOENIG (from FRANCE mardi 23 juin 2009 12:20:18)

  • How to determine page break in smartforms...

    hello,
    i have a problem in smartform...
    if my output exceeds more than one page...then i have to print CONTINUED in first page...
    how can i do that? pls help me..
    thanx in advance..
    regards,
    Maya.

    hello Sujatha...
    i couldnt control the page break...i can display 14 lines in my main window....even if my document contains only 14 items, all the 14 items r displaying in the first window....then it is trigerring page break....displaying nothing on main window of second page, not even table header....
    i tried to increase the height of main window......if my doc contians more than 14 items , then 15 items will display on first page..
    even then if my doc contains exactly 14 items ...then its displaying 14 items in the first page and trigerring a page break , displaying nothing on second page....
    pls help me...
    thanx in advance...
    regards,
    Maya.

  • How to Get Page Break Before Inline TOC in EPUB?

    I'm exporting a book file to epub.  The TOC is created correctly inline, but I can't yet find a way to get a page break right before it. 
    In EPUB Export Options->Advanced, I have selected Split Document->Based on Paragraph Style Export Tags.
    The TOC Header (saying "Table of Contents") has the paragraph style "TOC Heading." In paragraph styles panel->Edit all Export Tags, I have checked the checkbox for "Split EPUB" next to the "TOC Heading" style.
    But, after export, there is no page break before the TOC Header.
    How can I correct this?
    Thanks very much in advance to all for any info.

    I think basically you're doing it correctly. I've run into the same problem. What I found is that the heading in the PLACED table of contents (placed by using the Layout > Table of Contents feature and placing it onto the page) will not work for making a page break. It's a special kind of object because it can be updated by the Update Table of Contents command.
    You have to do a workaround: You need to create "Table of Contents" in a separate frame and apply the TOC Heading paragraph style.
    In the TOC style, DON'T include content for the TOC title. Look at the screen captures below of my TOC.
    By separating the "Contents" into its own frame it works in EPUB:

  • All page breaks are converted into section breaks

    Hi,
    In my template in ms word 2007 I have page breaks and section breaks. When I generate the output what I see is that all the page breaks are automatically converted into section breaks. Is this a bug ? Or is there a way to solve it.?
    Thanks

    Hi elic elico,
    Are your page breaks created by inserting multiple returns? If so, then the script will certainly remove them. You can "fix" this by deleting the relevant line from the text file. In general, however, it's better to control page breaks by other means.
    Thanks,
    Ole

  • Page Break when converting to PDF

    I have created my forms online and deleted a bit of content to reduce their size.  I also adjusted the page breaks in pdf/print view mode.  When I download the PDF, I find excess blank pages in the PDF and the page breaks I set are not where I put them.  Any thoughts on how I can fix this without having to rebuild the online survey from scratch?

    Hi,
    It would be easier to help resolve this issue if I had access to your form design. You can share it with me in one of two ways:
    1. Add me ([email protected]) as a collaborator. To do this follow steps 1 and 2 described in the following FAQ:
    http://forums.adobe.com/docs/DOC-1424
    2. Export the form and email the design template (.fcdt file) to me - [email protected]
    Thanks,
    Brian

Maybe you are looking for

  • Is there a way to auto fill cells with the exact number in mind?

    I am trying to avoid this: Column "A" is used as a "MATCH(" point for an "INDEX(" formula in another spreadsheet, and although cell A329 says 73.14, which is what the other sheet can identify to populate the particular row five columns over, its real

  • How do I copy a project to another computer?

    A project in FCPX has grown from its original scope. I've now got four different Events on an old iMac (maxed out with 4GB). I want to move the project to another Mac. I've copied over all of the Event folders as well as the Project folder. (Total: a

  • 1KEK only for AP

    Hi, We are in ECC and not activated new GL and going with Classic PCA. Requriement: Accounts payable side user wants to split the vendor (reconciliation) account based on expenditure items PCA. I know through NEW GL PCA its possible but due to some t

  • Automating Report Creation and Distribution in B1

    I am creating a Sales Report for all Sales Reps. Management wants to break the report into separate PDFs, one for each Rep and email the reports to those reps.  Is there a way to automate the whole process so one click will create the reports and ema

  • How to create a Cash Flow Statement?

    Dear all: I am trying to create a Cash Flow Statement, and my approach is to use Dimension formula to calculate on the fly. Is my approach the best practice, or should I use script logic instead? Based on my understanding, if I use Dimension formula,