Remove page break

How do I remove a page break in a PDF using Acrobat Pro?  My document has two cropped pages and I want it all on one page.
Is my only option to convert the file to Word and do it there?

To add just a bit, Acrobat does not have the type of editing capabilities as you are mentioning. So the workaround that was mentioned is one way of doing what you want.

Similar Messages

  • How can I remove Page Break Views?

    This is driving me nuts -- I'm just trying to write basic text, and yet, for some reason, Pages forces me to view a page as if it's a real piece of paper. As I'm writing, and come to the end of the page, there's two inches of white space from the end of the last sentence on the page to the start of the first sentence on the next page.
    I find this distracting . . . I'm trying to type a sentence and I don't need to have a massive visual break interrupting the flow of writing. I can't find any way to turn off this view. Not that I want to, but why can't I type one continuous paragraph that could span multiple pages -- without being limited to the freakin' "page" metaphor of viewing?
    I'm so frustrated with this that I think I'm going to have to go back to using MS Word. I'm trying hard to learn Pages, but when I have to knuckle down and write, I'm constantly getting interrupted by the page breaks. While I might be able to train myself to ignore the page break, each time I get to the bottom of a page, I effectively lose two inches of vertical space, which means I can't see as much text above and below what I've just written. It's maddening!
    Does anyone have any solutions? Or is this just an astounding oversight on the part of Apple development?
    I can manually reduce the margins, but I still get the big gray line separating pages at least a vertical inch of separation, plus, if I send the document to anyone else who might want to print it, I have to remember to change the margins back.
    Right now, I'm leaving Pages and finishing my project in MS Word. Please help me come back to Pages! . . . .

    tyronehowe wrote:
    I understand what Yvan KOENIG is saying but, with respect, that simply does not make sense to me.
    My old friend AppleWorks work with separated pages since 1991 and it seems that it is OK for its users.
    Pages is a component of the AppleWorks successor so it seems logical that its designers made the same choice.
    You wrote:
    Whatever justification is given, it is simply a deliberate feature omission.
    Sure it is a deliberate choice.
    As always, the engineers apply this chapter of the Human Interface Guidelines
    +Apply the 80 Percent Solution+
    +During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution—that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.+
    +If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.+
    I assumes that you are in the 20% dropped.
    You wrote:
    As much I hated to admit it, I wanted the “normal” view that Microsoft Word gave me (sometimes known as “toilet-paper” view).
    Now I know why I dislike this view: I never write on "toilet-paper"
    If you are really annoyed with the choices made by Apple, you may build your own template.
    It requires a few seconds to define one with these settings:
    You wrote:
    I have requested this as a new feature to Apple several months ago.
    Then, cross your fingers, and wait _at least_ for iWork'09
    Yvan KOENIG (from FRANCE jeudi 5 juin 2008 20:15:03)

  • How to remove page breaks in converted document

    This is probably more a Microsoft Word problem, but it started out as an InDesign document, so I thought it wouldn't hurt to post the question here in case someone else has encountered a similar problem.
    I formatted an epub on Amazon for my job. Since I am more familiar with InDesign, I used it along with Amazon's script to turn it into an epub.
    Since then, I've noticed the cover has inexplicably rotated 90 degrees on Amazon. I asked about it in Amazon's forums, and they said InDesign isn't really reliable for epubs.
    So I'm trying to recreate everything in Word. The original Word document isn't up to date with all the editing and corrections I did, so I exported each InDesign chapter document into a PDF, then used Adobe Acrobat to save each PDF as a Word document.
    Some of the resulting Word documents seem to be littered with multiple page breaks and/or section breaks. I'm able to delete most of them, but some of them fall right in the middle of a sentence and won't delete. I've selected the paragraph icon in the ribbon to turn on invisible characters, and I can't see a page or section break indicated in most of these breaks.
    Anyone know what might be causing these and how to delete them?
    Maybe I should just copy everything from my InDesign documents and paste them into Word instead?

    Hello,
    If your reports is executed in the MODE CHARACTER , the "Page Break" generaed in the output is the one defined in the prt file
    Code Name : after page
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/files/printing/printer_def_file_syntax.htm
    regards

  • How to make form a single long page; remove page breaks?

    Hi. I am pretty new to liveCycle but really like it so far! I think these forums are great too. I did a few forums searches and couldn't find a specific answer to this question, so I began this discussion. Please forgive my ignorance if this is has been discussed before!
    I am trying to make a form that isn't intended to be printed. I would like to make it a single long page instead of having page breaks in it. I have experimented with custom page sizes and way able to make the pages longer, but there is a limit to how long liveCycle allows me to make the pages... like 27" or something. I'd like to have no page breaks at all.
    I am not very familliar with XML, but do have some HTML experience, so I could copy/paste some code to the XML sheet if need be-- provided I was told where to put it.
    I attached a bit of the form I would like to turn into a single page to this discussion.
    Any help at all would be greatly appreciated! Thank you very much!

    In teh hierarchy view - click on the Master Page/ Page1. Now on the object palette on the Master Page Tab you can choose a Paper Type. If you scroll to the bottom of the list you can choose a Custom size. The width and height dimensions are now available to you. The UI in designer limits you to 59 in. If you need more than that there is a way to get bigger but you have to do it in the native XML format. Let me know if you need more than that. Here is a modified sample.
    Paul

  • How do I remove a page break in Pages?

    I can't seem to find any help in the manual on how to remove page breaks that I inserted in the document by using the Insert>Page Break on the menu.
    I have Show Invisibles turned on and I see the code for the page break but I can't delete it.
    Anyone know how?
    thanks
    nick
    p.s I'm using Pages 5.2

    thanks..I had tried that before but I don't think I had selected it properly
    worked great

  • How to remove the page break for CSV report

    Hi,
    I'm working on a rdf report and have an issue with page break.
    As usual there exits a page break in the report output. how do I remove it.
    work around: set Page break before/after : NO
    worked on margin re-size, how ever could not resolve the issue.
    Can any one help me on this.
    Thanks in advance.
    Thanks,
    Santhosh

    There are two ways to do this:
    1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
    2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
    <orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

  • This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

    This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

    See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

  • How to removed dashed lines from "Page Break View"?

    Hi,
    In Excel 2010, I found that once “Page Break View” is selected, there will be dashed lines across the view even after returning to “Normal” view. These dashed lines can be distracting.
    Is there a way to remove them?
    Bob

    Yes use
    File -> Options -> Advanced
    Scroll down to Display options for this worksheet and remove the tick in Show Page breaks.
    Unfortunately it's sheet specific so you'll have to do it everytime it happens until you've done all the sheets.
    Unless you develope some VB to do it for you,
    G North MCT

  • Issue With Page Break When Sorting is also applied on group

    Hi
    I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
    The following is the sample XML
    <ROWSET>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Accounts</ORGANIZATION>
    <FULL_NAME>test1,</FULL_NAME>
    <ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
    <CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
    <RUN_VALUE>250</RUN_VALUE>
    <MONTH_VALUE>500</MONTH_VALUE>
    <QUARTER_VALUE>500</QUARTER_VALUE>
    <YEAR_VALUE>500</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test2</FULL_NAME>
    <ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
    <CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
    <RUN_VALUE>5.19</RUN_VALUE>
    <MONTH_VALUE>10.38</MONTH_VALUE>
    <QUARTER_VALUE>10.38</QUARTER_VALUE>
    <YEAR_VALUE>10.38</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test3</FULL_NAME>
    <ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>19.67</RUN_VALUE>
    <MONTH_VALUE>39.34</MONTH_VALUE>
    <QUARTER_VALUE>39.34</QUARTER_VALUE>
    <YEAR_VALUE>39.34</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test4</FULL_NAME>
    <ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>0</RUN_VALUE>
    <MONTH_VALUE>360</MONTH_VALUE>
    <QUARTER_VALUE>360</QUARTER_VALUE>
    <YEAR_VALUE>360</YEAR_VALUE>
    </ROW>
    </ROWSET>
    In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
    When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
    But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
    kumar

    Hi All,
    I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
    When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
    Can anybody throw some light on this?
    FYI...
    I am using this code:
    ?if: position() mod 6= 0?
    ?split-by-page-break:?
    ?end if?
    (Of course with in tags)
    in G_LINES loop.
    Can anybody help me out :-(
    --Saritha                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Page breaks in (html) printed apex report

    I am having a strange problem that appears to be related to APEX page template.
    I have a report that is html generated by a PL/SQL function. I need to have page breaks in the printed report at specific locations. I am adding this style to the html output of the function:
    <STYLE>
    DIV.pageBreak { page-break-before: always; }
    </STYLE>
    and I insert this at the locations I need breaks:
    < D I V CLASS="pageBreak"/>
    (without the spaces in DIV)
    (found this technique here: http://www.unagibay.com/DesktopDefault.aspx?tabindex=1&tabid=100&itemid=1821 )
    This works perfect when I run the report in IE, but FireFox is "ignoring" the page breaks. However, if I take just the output of the PL/SQL function in an html doc, FireFox works fine (breaks at the proper places). This makes me believe something related to the "page wrapper" content generated by APEX causes FireFox to not handle the breaks.
    I have tried copying and editing the Popup and Printer Friendly page templates, but I either remove too much and the page doesn't render, or the page breaks don't work.
    My questions for the APEX gurus are:
    1. Is there an "approved" way to get page breaks in the printed version of an APEX report, or is there a better way to do what I need to do.
    2. What is the minimum contents for a page template (what can I safely remove).
    Thanks,
    Bill

    Hi Owen,
    the page breaks are inserted before/after the section.  Expand the report structure window and make sure that the properties window is open below.  Once you click on the section part, you will see where you can insert the page breaks - the check boxes will appear in the properties.
    yes on the second part - just insert the page break between the data providers and then repeat the header for the data provider on the pages (also check boxes on the properties tab)
    Good luck

  • Page break within a group(s)

    I have a report that uses a group that contains three parts, a details part, a blank lines part, and a totals part.
    What I am attempting to achieve, is to produce the report so that there are page breaks within this group. The page breaks should happen after each part.
    I have been able to achieve the desired look by adding a group for each part, with an additional 'blank' group to provide a page break between the Details Part and the remaining 2 parts. 
    This, however has left me with 3 issues;
    Throughout the report, there will be pages with only the heading and no details.
    There are pages that show 2 headings (one for the ending detail group and the other is for successive detail group)
    How to remove the headings for the blank lines part and totals part (which is now on their own separate pages) 
    The major pain point for me is issue #3. Anyone able to offer suggestions with the amount of information provided?

    Hello,
    Based on your description, you have three part in one group. You have add page break between each part. You have mentioned that the heading will repeat in each page. You have set the tablix repeat headers on each page, right?
    Since you have blank line part in the group, when we add page break between each part, we will get a blank line page. When we have set the heading will repeat in each page, we would also have repeat page header in blank page.
    Now, what your requirement is not get the repeat header in the blank page and total page, right? Please refer to the following steps below:
    Cancel the headers repeat in each page configuration.
    Add a total row before of the detail group. Change these text box values with headers values.
    Please refer to the screenshot below:
    If there are any misunderstanding, please feel free to let me know.
    Regards,
    Alisa Tang
    If you have any feedback on our support, please click
    here.
    Alisa Tang
    TechNet Community Support

  • Matrix exporting to excel with empty columns, with page break option of "Between each instance of a group" selected.

    I am working with Report Builder 3.0 I am using a matrix to produce grouped data on separate worksheets in excel.
    The select is:
    SELECT ID, Measurement, Value, [Date] FROM Measurements_Report. (please ignore the underscores they are just for formatting) 
    The contents of the Measurements_Report table:
    ID__Measurement__Value__[Date]
    1___Hot_________33_____10/1/2014
    2___Hot_________44_____10/2/2014
    3___Cold_________55_____10/2/2014
    The matrix contains a single row group based on the field "measurement". The Measurement group has the page break option of "Between each instance of a group" selected. 
    There is a column group based on the field "Date". 
    When this is matrix is exported to excel on the first worksheet (Hot) there are three columns as shown below:
    ID__10/1/2014____10/2/2014___10/2/1014
    1___33
    2_______________44
    Notice the last column doesn't have a value.
    On the second worksheet (Cold) there are also three columns as shown below:
    ID__10/1/2014___10/2/2014___10/2/1014
    3__________________________55
    This time notice there is only one row and only a value in the last column.
    I only want the columns with data for that worksheet to show up. How can I remove these empty/duplicate columns? Hopefully there is a simple fix. Thanks ahead of time.

    With the following contents of the Measurements_Report table:
    ID__Measurement__Value__[Date]
    1___Hot_________33______10/1/2014
    2___Hot_________43______10/1/2014
    2___Hot_________44______10/2/2014
    3___Cold________55______10/2/2014
    Returns on the first tab (Hot):
    ID__10/1/2014____10/1/2014____10/2/2014
    1___33
    2_________________43
    2______________________________44
    In the excel worksheet it contains a separate column for each date with a value. Thanks again!
    Why is the same date repeating on multiple columns? Do you've the time part also returned from database?
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Page-break in alv background job for alv output variant not coming correctl

    Hi,
    I have created an ALV grid report. When i run the report in background i get the output with correct page-break on FIELD1. Now when i run the report in background with an "ALV output variant" (its the ALV variant that controls the fields display in the output; this is not the program variant), i do not get the page-break on FIELD1.  I have already build the sort criteria and using:
    gs_sort-group = '* '.     "New-Page
    Please let me know what could be reason for not getting the page-break in background when i am using the alv output variant and how do i correct this problem.
    Regards,
    Rakesh

    Hello Everyone,
    I have solved the problem. While running the program in background, we get the page-breaks when we use the below part of code in the sort catalogue with the condition that the program variant should not use any ALV layout variant.
    gs_sort-group = '* '.     "New-Page
    If you are using the ALV layout variant in the program variant then we can check the ROWPOS, COLPOS, and NO_OUT for that ALV layout variant and pass them along in the fieldcatalog table. You should be careful with not to pass the layout variant in the DISVARIANT. You can notice that i have cleared it and simply passing the program name into that.
    *C-- Process separately for jobs running in Background. Actually
    *C-- sortcat-group solves the problem only in Foreground. In background
    *C-- when ALV layout variant is not selected then it works otherwise it
    *C-- fails. So for background jobs we are reading the fieldcat and then
    *C-- passing the same in the display FM.
      IF sy-batch = 'X'.
        CALL FUNCTION 'REUSE_ALV_VARIANT_SELECT'
          EXPORTING
           i_dialog                  = ' '
           i_user_specific           = ' '
           i_default                 = ' '
    *   I_TABNAME_HEADER          =
    *   I_TABNAME_ITEM            =
            it_default_fieldcat       = gt_fieldcat
            i_layout                  = gs_layout
    *   I_BYPASSING_BUFFER        =
    *   I_BUFFER_ACTIVE           =
         IMPORTING
    *   E_EXIT                    =
           et_fieldcat               = lt_fieldcat
    *     et_sort                   = gt_sort[]
    *   ET_FILTER                 =
    *     es_layout                 = gs_layout
         CHANGING
           cs_variant                = gs_disvariant
         EXCEPTIONS
           wrong_input               = 1
           fc_not_complete           = 2
           not_found                 = 3
           program_error             = 4
           OTHERS                    = 5
        IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CLEAR gs_fieldcat.
        LOOP AT gt_fieldcat INTO gs_fieldcat.
    *C-- Transfer all position changes to gt_fieldcat from lt_fieldcat
          CLEAR ls_fieldcat.
          READ TABLE lt_fieldcat
                INTO ls_fieldcat
                WITH KEY fieldname = gs_fieldcat-fieldname.
          IF sy-subrc = 0.
            gs_fieldcat-row_pos = ls_fieldcat-row_pos.
            gs_fieldcat-col_pos = ls_fieldcat-col_pos.
            gs_fieldcat-no_out = ls_fieldcat-no_out.
            MODIFY gt_fieldcat FROM gs_fieldcat INDEX sy-tabix.
            CLEAR gs_fieldcat.
          ENDIF.
        ENDLOOP.
    *C-- Clear the disvariant for the background job as it contains the ALV
    *C-- layout varinat
        CLEAR gs_disvariant.
        gs_disvariant-report = 'ZGPPMP0001'.
    Then pass gt_fieldcat to 'REUSE_ALV_GRID_DISPLAY'.
    The reason i'm doing it this way is that when we pass the layout variant name, the contents in gt_fieldcat were getting modified.
    One more thing i'd like to point out is that that, i tried to delete the fields with no_out = 'x'. Now when i ran the program in background with all the fields in sort catalog (suppose there are 2 fields field1 and field2) also in fieldcatalog it ran fine. In the next run in background i removed one of the fields in sort catalog from the fieldcatalog (delete the fields with no_out = 'x') and i got dump. Basically i had hidden field1 and so the code which was deleting fields with no_out = 'x' deleted this field from gt_fieldcat. So basically we should not delete fields with no_out = 'x'.
    I was getting ABAP runtime errors    MESSAGE_TYPE_X in the following part of the standard code.
    000310     LOOP AT CT_SORT INTO LS_SORT.
    000320
    000330       READ TABLE IT_FIELDCAT ASSIGNING <LS_FIELDCAT>
    000340            WITH KEY FIELDNAME = LS_SORT-FIELDNAME BINARY SEARCH.
    000350       IF SY-SUBRC NE 0.
         >         MESSAGE X000(0K).
    000370       ENDIF.
    000380
    000390       LS_SORT-SELTEXT = <LS_FIELDCAT>-SELTEXT.
    i have just mentioned this part because when i checked the forum many people were getting such errors "MESSAGE_TYPE_X". This could also be one of the reasons.

  • How to enter a page break in numbers

    how do you enter a page break in numbers?

    In Numbers there is no concpet of "entering a page break".  You look at the print preview which you see when you select the menu item "File >Print...".
    If the pagination is correct you click the "Print" button.  If not then you click the "Done" button and move content around.  Often I place, temporary, rectangles on a page that take up the full page so I know where to put content, then remove them before printing.

  • Page breaks appear in the spool output of report when run in the background

    Hi All,
    Report is using fm 'REUSE_ALV_GRID_DISPLAY' to display the report. parameters passed to this fm for display are :it_fieldcat,is_layout,it_events,t_outtab.
    Page breaks appear in the spool output when report is run in the background.These page breaks needs to be removed. When executed in the background, the excel extract should be the same as if pulling directly from the report itself.
    How to remove the page breaks in background?
    Thanks & Regards,
    Abhishek Singh

    Hi
    You can use the below code , which the reprt run in background. If you run the report in background thenyou need to use  'REUSE_ALV_LIST_DISPLAY'
    if sy-batch = ' '.
    call 'REUSE_ALV_GRID_DISPLAY'.
    else.
    call 'REUSE_ALV_LIST_DISPLAY'.
    endif.
    if you are using OO alv then write this code..
    CALL METHOD cl_gui_alv_grid=>offline
    RECEIVING e_offline = off.
    IF off IS INITIAL.
    CREATE OBJECT g_custom_container
    EXPORTING container_name = g_container.
    ENDIF.
    Regards

Maybe you are looking for

  • Sorting tree with Sortset/Treeset

    Have anyone tried sorting a jtrees nodes using sortset or treeset? I just want the children for each directory in my tree to be sorted. Collections like treeset and sortset should do the trick, but i have failed in my quest for the right solution. Ca

  • Unable to patch portal with stack 15?

    Hi, We got BI system with portal running on windows 2003 server. I am trying to patch up portal/jave stack with stack 15. After JSPM successfully logged on with SDM and it shows target sp 15 for all components. But after i click deployment jspm is gi

  • I installed the trial version of Photoshop CS6 but it will not let me open the program.

    When I go to open it an error message comes up saying that "it may be damaged or incomplete". But when I go to Adobe Applicaion Manager it says that it is "up to date". How can I fix this?

  • Why does print function in Preview with Lion OS not work?

    Since upgrading to Lion, the print functionality on Preview does not work.  When you select Print, the rainbow wheel of misfortune appears and I have to force quit Preview after a while. The print window does not even appear to select a printer (I ha

  • Buttons change to colors I didn't request

    I have several buttons in my menu, they are BrushMed from the Palette's Shapes -> Apple. The buttons are all the same style and have identical parameters except for the things that should be different, like coordinates, text, asset, and navigation. I