How to render direction (route) on Elocation Map?

Hi,
I have to build a OAF page where I have the latitude and longitude for source and destination points and when I submit a request from OAF page the Elocation Map should render the driving directions and route on the Map. I have found the following request to Spatial
<?xml version="1.0" standalone="yes"?>
<route_request id="8"
route_preference="shortest"
road_preference="highway"
return_driving_directions="true"
distance_unit="mile"
time_unit="minute"
return_route_geometry="true">
<start_location>
<input_location id="1">
<input_address>
<us_form1 street="1 Oracle Drive" lastline="Nashua, NH" />
</input_address>
</input_location>
</start_location>
<end_location>
<input_location id="2">
<input_address>
<us_form1 street="77 Massachusetts Ave" lastline="cambridge, ma" />
</input_address>
</input_location>
</end_location>
</route_request>
How do I send the same request through my OAF page? Are there APis exposed and what the process?
Thank you,
Prashanth

Probably best to post this on the [FMW MapViewer forum|http://forums.oracle.com/forums/forum.jspa?forumID=727].

Similar Messages

How to render direction on elocation Map in my OAF page?

hi,
I have the coordinates of start and destination points in my OAF page. How do I render the directions like what I see in http://elocation.oracle.com/elocation/directions.jsp.
Is there a service elocation provides where I can pass the values and expect to render the elocation page on the region of my page. Like calling the elocation service and render it on the region of my page, where I can also zoom in/ zoom out to see the directions in details.
If not, can you please suggest any documents whihc has the APIs I need to call to implement direction on elocation map which I can fit into my page.
Thank you,
Prashanth
Edited by: Prashanth Pillai on Oct 23, 2009 1:49 AM

You need to send an XML routing request to the elocation server, extract the route geometry from the response, and display the route geometry as an MVFOI object on the map.

How to view calculated route in ovi maps?

Hi!
I have the N8. My problem is that when i have calculated a route in maps, i want to view where the map wants me to drive. Several times i have been sent on hopless journeys because i have trusted the route calculated for me. How can i view the route!?!?!?!?!????
Thanks!

@passelat1
You could always "Synchronise with Ovi" and view at http://maps.nokia.com
Happy to have helped forum with a Support Ratio = 42.5

How to Save & Transfer Route/Favorites from Maps ...

First of all I think that there is a lot confusing with the names of the  things in OVI:
1) OviSuite is a program to synchronizing some things and download Maps.
2) Ovi Maps is a program that  runs in the 5230 to do navigation and synchronization of maps
3) MapsOvi is a site in the Internet, to create and synchronize favorites and Routes.
I make a little basic test with the Maps for OVI Site and my 5230 and after creating some favorites places and routes in the Internet Site, I can not find a button to save and make the transfer of routes and favorites from the Map Ovi suite to my phone, using Bluetooth or USB cable.
There is a way to make the transfer directly from my PC to the 5230, using a USB cable or Bluetooth? Or the only way to transfer the favorites and routes created on the Maps Ovi to the phone is the real time synchronization of both, using the Internet connection on the way of my phone and spending a lot of $$$ to do this?
I think that the overall design of OVI things must be totally remade
Solved!
Go to Solution.

Thank You for your help. But the problem with my Nokia 5230 is that it does not have WiFi,so I would need to use the 3G connection, wasting some Megabytes. I do not understand why the OVI software does not have an option to download the favorites and routes created in the Internet Site, directly on my phone using the USB cable or Bluetooth connection. The OviSuite could do this with the Maps,why not with the wpts and routes? Regrads. Pascal

How do I clear routes stored in maps on I phone 4s?

Can anyone help with the above

Hi cor-el. Thanks for this. I have followed your directions I think. In the navigation bar that has "about:home" written in it, and the yellow star to the right - I have highlighted the web site address I want to delete, and pressed delete. It disappears. The deletion is only temporary. The website does disappear from the list, but reappears when the the first letter of the web site is entered into the navigation bar. I have closed and restarted Firefox, and the address is still there. So your advice does remove it, but it is still there, and still there next time I use Firefox.
Hope that makes sense.
Bert

How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

I have problom to running maps.when i put any direction route a massage popup. Direction could not be found between these location. I am ussing ios 6. Any body plz help me

I have problom to running maps.when i put any direction route a massage popup. Direction could not be found between these location. I am ussing ios 6. Any body plz help me

Read here, as such is not supported everywhere:
http://www.apple.com/ios/feature-availability/

How to combine "Object-to-XML (OXM)" and "Direct to XML Type" mapping?

hi
If I have an XMLType column in my table (wich I can map using TopLink) and I have defined the structure of the contents of this XMLType column using XML Schema (wich I can map using Toplink), how can I combine both types of TopLink mappings "as transparently as possible"?
for "Object-to-XML (OXM)" mapping
see http://www.oracle.com/technology/products/ias/toplink/technical/tips/ox/index.htm
for "Direct to XML Type" mapping
see http://www.oracle.com/technology/products/ias/toplink/doc/1013/main/_html/relmapun004.htm#CHDFIFEF
thanks
Jan Vervecken

Thanks for your reply James Sutherland.
Although I haven't used a "TopLink Converter" before, this seems like a good idea.
The thing is that the "TopLink Workbench Editor" for my "Direct to XML Type" mapping doesn't have a "Converter" tab, some other mapping type editors do have such a "Converter" tab.
I'm not sure if I completely understand how such a "TopLink Converter" is supposed to work. How many attributes do I need in the "XMLRow" Java object for the "MY_XML" column in the "XML_TABLE" table I try to map to?
I suppose I should try to get a situation where the "XMLRow" Java object has an "myXML" attribute of Java class type "MyXML" (where "MyXML" has been mapped to an XML Schema), not?
So do I also still need an attribute "myXMLDocument" of type org.w3c.dom.Document as I do now for the "Direct to XML Type" mapping?
Oh, by the way ... for anyone who hits this forum thread looking for the reason why the TopLink Workbench reports the problem "Attribute must be assignable to java.lang.String, org.w3c.dom.Document, or org.w3c.Node" while your attribute is of such a type, read this forum post
Re: Toplink WB 10.1.3 - Aggregate field mapping bug and XMLType question
For me the "Direct to XML Type" mapping works fine, just ignoring the waring. This is supposed to be bug number 5071250.
thanks
Jan Vervecken

How to set the router and play the Command & Conquer using direct IP mode?

My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?

Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details.

How to add arrows to directional lines on a map

Greetings, i just created a map page for a book using iPhoto 11. I've added the directional lines of the locations I visited and would like to be able to add arrows to the lines showing the order of the trips. In previous projects the arrows appeared automatically but I can't find an option to add them in iPhoto 9.5.
Thanks in advance,
Scott

Hello there, Scott.
Great News: the feature is still part of the Application. The following Knowledge Base article offers up the steps for adding that type of line:
iPhoto 9.5: Customize map locations in photo books
http://support.apple.com/kb/PH15223
Particularly:
Add direction lines on a map
You can add lines that indicate a path or direction to two or more locations on a map.
Click the book name in the Source list.The book pages appear in All Pages view.
Click the Options button in the toolbar.
Double-click the page that contains the map.The page spread appears with the page selected.
Select the map.Important: Be sure to select the map, not the page.
In the Options pane, choose a line style from the Line pop-up menu.Note: To add lines, a map must contain two or more locations.
The lines appear in the order in which the locations appear in the Places list.
To change the order in which the lines connect the locations, reorder the Places list by dragging a location up or down in the list.
To show round-trip direction lines, select the “Return to Starting Place” checkbox.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How can I save to the same map every time when printing pdfs?

How can I save to the same map every time when printing pdfs?
Finder points to the document map even when I chose a different map recently.
I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.

that link seems to be broken right now:
403 Error - Forbidden - No cred, dude.

How to read Group ID from Value Mapping Context in Cache Monitoring ?

Hi friends,
    In RWB --> Cache Monitoring --> Integration Server (Java) -> (Search for Value Mapping Groups) in this each item is identified by Value Mapping Group (GroupID, Context, Identifier/Agency, Identifier/Scheme). Either we create Value Mapping Table in ID or replicate value mapping data directly from text file/SAP table etc., in run time cache, data will be identified in this manner.
    Now, our requirement is to delete a record the Cache for a particular context. Two operations provided by XI one is 'Delete' and another one is 'DeleteGroup'. When we use either of this, we should know GroupID. Suppose, I replicated some large amount of data from my text file in Runtime Cache. Value Mapping Table is like that IN --> India, US --> USA, AU --> Australia, EG --> Egypt. Now, I am required to write a program to get the input country code from user which is going to delete in the value mapping table like IN/AU.... For this, what logic we should follow in the program is, First we scan the value mapping table and find the record (country code) which is match with the input. Then find the GUID value for this record. Now we use the DeleteGroup Operation and pass this GUID and then delete the record.
    So, in essence, how to read the GUID from value mapping context.
    Friends, Kindly help me to do this.
Thanks in advance.
Jegatheeswaran P.

Did you get the way to read group id?

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

How to use External Routing in Human Task

Hi,
Could you please help me knowing how to create External Routing in Human Task in SOA Composite.
Thanks

When defining the external routing class in the .task, you can define the name value pairs which you want to pass to the program. Here you can pass dynamic values to the class as well by reading the appropiate node from the payload. In your class the name, value would be available in the "Map propertyBag" parameters in Rajiv's example link.
Document says:
Map of properties — When an assignment service is specified, a list of properties can also be specified to correlate callbacks with backend services that determine the task assignees.Or if you are too lazy to map many parameters and values, you can always read the whole Task task and then use getDocument and some xml reading to determine the values. This Task is the whole document.
API:
http://docs.oracle.com/cd/E17904_01/apirefs.1111/e10660/oracle/bpel/services/workflow/task/model/TaskType.html#getDocument__Document says:
Task document — The task document that is executed by the workflow. The task document contains the payload and other task information like current state, and so on.Also you need to make sure that you are maintaining the state of the assignment class, doc says:
The assignment service class cannot be stateful because every time workflow services need to call the assignment service, it creates a new instance.Thus if you are doing multiple serial assignments one after the another and if your server restarts in between, then the approval would start at the first assignee again. Suppose in Rajiv's doc link e.g., if the task is assigned to 'wfaulk' and the server restarts then the task would be assigned back to 'jstein'. In order to prevent this you need to modify the java code and each time the variable changes it's value you need to place it in a dehydration store. Also on each action over the process you need to reinitialize the variable from that dehydration store.
-Bikash

Help! How To Delete Unwanted Routes in Nokia 5230 ...

How To Delete Unwanted Routes in Nokia 5230 Nuron?
(which are under MENU -->Applications -->MAPS -->Favorites -->Routes)
It's weird that I can create a route but can NOT delete any? Anyone please help!
Solved!
Go to Solution.

GPSLover wrote:
How To Delete Unwanted Routes in Nokia 5230 Nuron?
(which are under MENU -->Applications -->MAPS -->Favorites -->Routes)
It's weird that I can create a route but can NOT delete any? Anyone please help!
On a 5230 highlight the route you wish to delete, then hit the search bar. The keypad appears, then just press the backward pointing small white arrow on the far right hand side of the screen about half way down and it will then say "Delete selected route?"
Happy to have helped forum with a Support Ratio = 42.5

How to render direction (route) on Elocation Map?

Similar Messages

Maybe you are looking for