How to repair a 7.20 Installation Server ?

hello all,
i set up an 7.20 SAP Installation Server with PL4. It worked fine last month, no changes were made, but now, if i start NWSapSetupAdmin.exe nothing happens. What possibilities do i have to repair the server or to see which part causes trouble?
Thanks in advance
Alexander

Hello,
Check log file 'NwSapSetupAdmin.log' in folder C:\Program Files\SAP\SapSetup\LOGs. If log file is not created, check Windows Event Viewer (System events).
Hope that helps.
Regards,
Martin

Similar Messages

  • How to repair the CVP reporting installation?

    Hi,
    I am facing the following issue on the cvp reporting server:
    The Informix database has been installed on the “D” partition. The hard-disk where partition D is installed has been defected so I lost the “D” partition.
    Anyway, I replaced the defected HD by a new one and I added the “D” partition again.
    Do you have any idea, how can I repair the installation of the CVP reporting ?
    Thanks in advance
    Georges

    yes, it is correct but we dont have any backup and now we dont have any data on D:
    i can reinstall the cvp reporting server but the problem is that an upgraded enviroment so i will need a new licenses for a fresh installation that is why i am looking to repair the installation and not to reinstall it
    thanks
    Georges

  • How to repair a disk without installation CD

    Hey everyone,
    My macbook has been acting up and has been spitting out CDs/DVDs lately... I checked my disk and it said:
    This disk needs to be repaired. Start up your computer with anpther disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
    Only there's one problem... I don't know where my installation CD is. I also have Snow Leopard if that helps.
    Any suggestions would be appreciated! Thanks.

    Does single user mode work?  (cmd-s at startup)
    If it will boot that far, try:  fsck -fy
    You really need that installation CD... just in case you need to reinstall. : )

  • How to repair database using SQL server 2008 and C#

    How to repair database in SQL server 2008 using C#
    Musakkhir Sayyed.

    Unfortunately your post is off topic as it's not specific to SQL Server Samples and Community Projects.  
    This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it.  The links I provide below will help you determine the right forum to ask your
    question in.
    For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
    Office, IE, and other products.
    For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
    search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
    search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
    If you think your issue is related to SQL Server Samples and Community Projects and I've flagged it as Off-topic, I apologise.  Please repost your question and include as much detail as possible about your problem so that someone can assist you further. 
    If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
    When you see answers and helpful posts, please click Vote As Helpful,
    Propose As Answer, and/or Mark As Answer
    Jeff Wharton
    MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
    Blog: Mr. Wharty's Ramblings
    Twitter: @Mr_Wharty
    MC ID:
    Microsoft Transcript

  • How to Repair Microsoft Dynamics CRM Server 2013 once the update rollup or service pack is installed?

    Hello,
    I am going through the following Technet article:
    Repair Microsoft Dynamics CRM Server 2013 (
    https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
    The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
    My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
    Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
    Thank you,

    Hello,
    I am going through the following Technet article:
    Repair Microsoft Dynamics CRM Server 2013 (
    https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
    The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
    My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
    Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
    Thank you,

  • I need quick time 7.5.5 for itunes.How to repair problem of installation?

    I have mac leopard 10.5.5 powerpc and I have itunes 10.6.3.
    Itunes need Quick Time 7.5.5 or more.
    I tried to install quick time but there is a problem of instalation.
    How to repair problem of installation of Quick Time?

    Some specific downloads of QuickTime:
    7.5.5 for Tiger
    7.6 for Tiger
    7.6.4 for Leopard
    7.7 for Leopard
    Since you have Mac OS X 10.5, Leopard, it would probably be better to use one of those Leopard-specific downloads.

  • Adobe Illustrator in out Terminal Server environment. How is the licensing work for Terminal Server installations?

    Adobe Illustrator in out Terminal Server environment. How is the licensing work for Terminal Server installations?

    You can find all forums here:
    https://forums.adobe.com/welcome

  • How to restore a SharePoint server on a development machine - how it was after a fresh installation

    Hi
    I have installed SharePoint server on my machine.  The thing is, I have created some custom web parts and made some modification to the sites, how do I restore back the sharepoint server to how it was when I first installed it.

    Hello,
    Simple way is, uninstall all custom WSP's which you have created. Then if you made any change at UI level in site then go to site settings page-->click on reset to site definition. This will remove all your work and provide your fresh site as it was earlier.
    Let me know if i am missing something or misunderstood you
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help
    (On vacation from 16th Oct to 28th Oct 2014)

  • How to repair corrupt sharepoint server (mdf) files

    SharePoint server has become a very popular enterprise application to enhanced collaboration. As the quantity and value of data stored on SharePoint platform rises, backup and recovery becomes critical and it proves to be a challenge for administrators.There
    can any reason of corruption of your SharePoint Server database and MDF files include drive failures, accidental file deletion on WSS websites, Server downtime, saved backup turned back, etc.
    If you come across SharePoint damage, then disaster recovery of SharePoint is important to execute. Third-party database recovery application for SharePoint is the best alternate solutions to be used for dealing with corrupted SharePoint database.
    If only you need to repair your corrupted SharePoint database due to drive failures, accidental file deletion on WSS websites, drive failures, server downtime, saved backup turned bad, and any other etc.This also allows you to recover the MDF files in offline
    mode. If you are searching for the recovery software like this, you are at the right spot.
    From here, you may get the Free Trail Version Demo to check the features and to see the recovery process.
    Visit:- http://www.filesrecoverytool.com/sharepoint-database-repair.html

    MS SQL Database Recovery software is an advanced solution to fix extremely corrupted MDF files of MS SQL Server. It effectively recovers maximum possible data from corrupted MDF files which are originally created in SQL Server 2000, 2005 and 2008 and higher
    versions.
    In case, MDF database has gone corrupt, damaged due to occurrence of this error, you can repair SQL database easily and productively using SQL Database recovery software to repair all items of corrupt MDF file.To know more about the software visit :-
    Repair MDF File of SQL Server
    Thanks
    Regards

  • How to repair corrupted xp files with the Toshiba recovery dvd pkg

    Hello all, my Satellite a105-s4054 has some corrupted xp os files.  Please advise on how to repair only these files using the recovery dvd pks included with my sytem.  I would rather not have to do a complete format and install.   And it is now obvious which of the individual files listed should be replaced to repair the corrupted files. 
    Is there  way to just replace the corrupted files?
    Thank you

    Satellite A105-S4054 
    ..replace the corrupted files?
    If they are system files, this will fix them.
       Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
    -Jerry

  • Installation Server and Windows 7 - Admin Rights Issue

    Here is a good one.  Completely reproducible error when granting Local Admin Rights by the LSH Service.
    For those with SAPGui Installation Server (SAPGui 7.20 Patch 6 or above) ... try this on a Windows 7 SP1 front end when you are NOT logged on with local admin rights.
      1) Open the Windows RUN dialog
      2) Type path to your installation server\setup\nwsapsetup.exe
      3) You should find the install wizard starts (granting local admin rights) as expected.
    NOW TRY THIS
      1) Type path to your installation server\setup\nwsapsetup.exe /uninstall
      2) You will find that you get a dialog about can't grant admin rights. Un-install will abort.
    This only appears to happen with the /uninstall switch!  Using /product= for example it will still grant admin rights.
    BIZZARE ...
    I've opened a Customer Support Message (Friday) priority - MEDIUM  have not heard back from SAP Support yet.
    Bob

    Jude,
    Thanks, it looks like that note has been getting a lot of update activity lately because the newly released Patch 8 has nwsapsetup.exe as version:  8.6.1.62   and that version also has the issue with the /nnnnnn switches. 
    I do have to say however, that this issue with nwsapsetup.exe and admin rights (requiring SapSetup.exe_Patch) first appeared with the release of Patch 6 for the Gui.  It was fixed for WinXP (I had a customer support message opened on this).  So why didn't anyone also test on Win7?
    Who is QA-ing these software releases? 
    Patch 8 had the same problem. 
    The change log for SapSetup.exe_Patch, is up to 8.1.6.70 now. 
    How are we in large enterprises to feel comfortable deploying any of this?
    End of rant ....
    Bob
    P.S. I really appreciate your presence here ... the tech assigned to my formal Support Message on the matter still has not gotten back advising of the updated release of SapSetup.exe_Patch. 
    Message: 0000746888
    Edited by: Bob Held on Sep 16, 2011 10:30 PM

  • Front End Installation Server - Administrator rights on client PC's

    We are using a third party repackaging tool to deploy sapgui to our workstations.  This has proven to be problematic in the past and are now considering the SAP Front End Installation server approach.
    After reveiwing the installation guide we are wondering about how packages are deployed to workstations.  Our users do not have administrator priveleges on thier workstations, so is it still possible to deploy packages from the installation server (either where they "pull" it down, or it is pushed down to them).
    This factor is one reason we are still using the third party repackaging tool because packages can be deployed under a "system" account (via a cleint agent on each PC) - in lieu of each user having administrator privelges on their workstations.
    If the SAP Installation server requires users to have these elevated priveleges it won't be an option for us.  Does anyone else have any experience with the Installation server and users who do not have administrator priveleges?
    Any feedback, directions, or links to additional resources would be greatly appreciated and happily rewarded with positive feedback and reward points
    thanks,
    jeff henke

    Hi Jeff. Try to download the SAPGUI 710 instguid. Go to http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000614745& in left press on 
    "SAP GUI for Windows" -->  7.10, download this file. In this Guide you can read about :
    Local security handling (LSH) lets users on the network deploy SAP front-end components on
    their front ends using NetWeaver SAPSetup without requiring administrative privileges on
    each front end. Regards.

  • How do i Install the Software Update Server for Windows 7?

    How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
    I downloaded the software so How do I install it?
    Do I install it all over again or when I have windows open?
    I am using Bootcamp.

    Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

  • How to install and configure the SQL Server

    Hi All,
    We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
    Kind Rgds,
    Steve

    Hi,
    Try this solution:
    The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
    Below are some important parts that you should pay attention to during the Installation process.
    Resolution
    Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
    Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
    Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
    Rgds,

  • How to repair Open Directory Master after Changing Hostname

    Summary:
    How to repair Open Directory after Changing your Server's Hostname (see separate post)
    Problem:
    I had to change our server's hostname from a private hostname (server.name.private) to a public hostname (name.dyndns.org).
    Procedure:
    1. Precautions:
    Since I was anticipating major dramas I tested the change of hostname on a clone ( I used Super Duper, and I very strongly advise everybody to heed this warning because a change of hostname will corrupt your server services, in particular Open Directory)
    Second, I exported the network users from Server Admin and copied the archive to the Drop Folder of the server's local account (because the network accounts will be unavailable after demoting the OD Master.)
    2. Change hostname and demote OD Master
    a) I re-booted the server from the clone
    b) I changed the hostname in Server App and I noticed that the Open Directory Password and the Kerberos database were still stuck with the old hostname.
    c)  I then demoted to a standalone directory (Server Admin) and I tried to promote the server to an OD Master using the Server App (Manage Network Accounts). Server App always returned an error saying I should check my network settings.
    3. List of 'fixes'
    I tried the following fixes to no avail (which does not mean that you can skip them)
    a) I checked the DNS entries, forward and reverse were working fine (sudo checkip -changehostname)
    b) Checked with Lookup in Network Utility, all was fine
    c) I deleted all system certificates (Keychain) which showed the name of the previous hostname
    ( N.B. you need not delete email certificate and private/public keys)
    d) I tried to assign a new static IP in Networking Preferences (had no visible result)
    e) I re-booted from the working drive and I re-paired permissions on the clone; I ran disk repairs.
    Despite all this I could not re-create an OD Master.
    I then looked for this dubious folder /var/root/Library/Application Support/Certificate Authority.
    I could not find this folder when using the Finder's Go To Folder, nor did "Easy Find" see this folder.
    I was about to give up when I read the posts on this page and I entered the Terminal commands
    sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
    I had not much hope when I set about to re-create the OD Master from the Server App.
    But lo and behold !!! I did not trust my eyes when Server App claimed that the OD Master had been successfully created. And indeed, Server admin showed a running OD Master, LDAP, Kerberos and Password Server all running again !
    Final touch: re-import the user accounts.
    Epilogue:
    I woud not have been able to fix this issue had not so many others shared their experience and the working solution.
    (Refer : https://discussions.apple.com/thread/3219325?start=0&tstart=0 )
    Thank you all !
    Let's hope that Apple will fix this annoying issue in the next server update.
    Regards,
    Twistan

    Hi Rhyan,
    Please try clearing the security cache
    http://www.sharepointanalysthq.com/2014/05/active-directory-groups-and-sharepoint-security/
    https://sergeluca.wordpress.com/2013/07/06/sharepoint-2013-use-ag-groups-yes-butdont-forget-the-security-token-caching-logontokencacheexpirationwindow-and-windowstokenlifetime/
    http://webactivedirectory.com/active-directory/windows-active-directory-cached-user-credentials/
    Please remember to click 'Mark as Answer' on the answer if it helps you

Maybe you are looking for