How to repair  by mistake deleted source system on R/3 side

Hello,
while trying to delete not needed source systems on BW it happend that the source system on R/3 side for a still existing (and needed) client was deleted. It's the main source system for tests so it's needed in any case.
But the check of this source system on BW side doesn't work anymore. Is there a possibility to repair this problem?
I tried to use this repair option on the menu but within the steps it wants to delete the existing RFC connection from R/3 to BW and I don't want to make it because there's another source system (another client) that uses this RFC - I don't want to destroy another working thing ;/
Is there any other possibility or do we really have to make a return tranport from the productive system to the test system?
Greetings
Bettina

Hello!
We tried it with the repair option in the menu - in general the source system is repaired again. But at the moment we don't know if everything's ok. So we are going to make a return transport from porductive to test system to be sure that nothing is overwritten in the future that shouldn't be overwritten.
Greetings
Bettina

Similar Messages

  • Unable to delete Source System in 3.5

    Hi Friends,
    desperately trying to delete Source System,  BW  provides this error:
    Deleting source system E14_M007 failed -> Check log !
    Message no. RSAR620
    log:
    Objects can only be displayed (change protected)
    Message no. RSAR771
    System is open , no dea how to proceed.... please HELP
    Regards
    Joe
    Edited by: J.F.B. on Jan 14, 2011 2:49 PM

    Hi Colum,
    Many tjanks, that is exactly I was looking for. If you should ever stay in my region visit me for some beers
    Regards
    Joe
    Hi Joe,
    Good stuff, glad it worked for you!
    Rgds,
    Colum
    Edited by: Colum Cronin on Jan 18, 2011 12:13 PM

  • Error deleting source system with error message: "incorrect input for....."

    Hi,
    I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
    "incorrect input for activating transported shadow IPacks"
    Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
    Please let me know what is the caused of the error and how to solve the problem.
    Thanks for your kind help.
    Regards,
    Mark

    Hi Mark,
    Which version of BW are you in?
    check this thread and also the note 709581
    Error Deleting Source system connection
    Thanks,
    Raj

  • Delete Source System Assignment for a DataMart Infosource in BW3.0B

    Hello Experts:
    Can one of you assist me with how to delete source system assignment for a system generated  infosource(ie., Infosource existing under data Mart). i noticed that in case of an Info Cube, system provides an option to delete the source system assignment but not for an ODS.
    I am trying to delete the system data source 8* that has been assigned to the data mart info source 8* and reassign the data source to my custom info source.
    Any ideas would be highly appreciated.
    BTW, we are on BW3.0B
    Thanks,
    Ragavan

    Hi,
    Go into the infosource with change mode. Open the transfer Rule/transfer structure and hit the delete button. It'll ask for delete datasource assignment. That would delete the source system assignment.
    Cheers,
    Kedar

  • Delete source system fails

    I've got a flat file source system definition which I deleted via rsa1 --> source system --> right-click --> delete.  it deleted all the dependant objects (transfer rules, psa, EDI config, etc), but the system still shows up in RSA1.  There's an entry in table RSBASIDOC referencing this source system (field SLOGSYS), because we manually tried creating a basic idoc type for it (which we now can't delete with tcode WE20 since it's been generated).
    Does anyone know off hand how to get rid of the source system in the RSA1 list?
    Thanks!
    Rich

    Hi Rich -
       I guess the SAP Note (967999) applies in your case. I've pasted it below for your reference.
    Symptom
    In the source system tree of the Administrator Workbench (AWB), you use the 'Delete' function in the context menu (right mouse button) for a connected source system.
    Even though the system displays success message RSAR 262:
    Source system & deleted
    at the end in the status line, the source system connection is visible again after the AWB has been updated and the source system connection has not been deleted.
    Other terms
    Context menu, source system tree, right mouse button, delete source system, RSAR, 262, 620, SLG1, RSAR262, RSAR620, AdminWorkbench
    Reason and Prerequisites
    This problem is caused by a program error.
    An error occurs during the deletion, however the system does not inform you correctly of this at the end, after the deletion process has terminated.
    Solution
    BW 3.0B
    Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available onceNote 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
    BW 3.10 Content
    Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available onceNote 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
    BW 3.50
    Import Support Package 19 for 3.5 (BW3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
    BW 7.0
    Import Support Package 10 for 7.0 (BW7.0 Patch10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
    To provide information in advance, the note(s) mentioned above may already be available before the Support Package(s) is/are released. In this case, the short text of the note still contains the words "Preliminary version".
    Pls assign points if helpful.

  • Delete source systems...

    Hello,
    When I delete a source system in RSA1 (not used, not existing in SM59) and then refresh the list, the deleted system pops up again. Why is this? How can I fix it? Must I delete the entry directly in source table? Which table contains the source systems?
    BR,
    F C

    Hello,
    I have checked all tables and deleted the entries where they existed. However, the problem still persists...! There is no error message when deleting source systems  (in RSA1) and at first they disappear. But on refresh, they appear again... Strange...
    BR,
    F C

  • Tcode for deleting source systems

    Dear all,
        is there any tcode for deleting source systems in BI 7.0? I tried RSAP_BIW_DISCONNECT and RSAR_LOGICAL_SYSTEM_DELETE, but these two didn't exist in BI 7.0. Please help. Thanks.
    Jin Ming

    hi,
    chk the below link
    How to delete source systems?
    Ramesh

  • How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

    Hi,
    I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI".  While I'm waiting for  more authorisation to r/3 to carry it out and test this functionality.
    I'd like to ask a question to anyone who has implemented this type solution.  On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query.  I suspect when we run a query I would run it for only a period(using variable) to reconcile.
    My question is this.  Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
    Regards

    DEar Mark,
    There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
    On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
    hope this helps.
    Kindly assign the points if it works.
    Revert back if u need futher help/information.

  • How to  upload Transaction data from source system to BI 7.0

    Dear friends,
    I want to know how to  upload Transaction data from source system to BI 7.0.
    if anybody having step by step material for this process ,please send it to my
    mail id.
    [email protected]
    [email protected]
    Thanks,
    D.prabhu

    Hi,
    it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
    regards
    Siggi
    PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

  • What is delete Source system assignment???

    Hello All,
    If we go inside Infosource in Source system and then right click there. One option there is " Delete Source System assignment" .
    If we chosse this option then what will happen? Can i reassign infosource  to new souce system after chosing this??
    Thanks for reply

    Hi,
    Yes, this deltes the sync between source sytem(DATA SOURCE) to bi.(INFOSOURCE)
    and you can get connected to another source system, but this may lead to problems. so make sure before delte the sourcesys asigment and going for new one.
    Edited by: Aduri on Dec 26, 2007 10:08 AM

  • DELETE SOURCE SYSTEM FORCEFULLY

    Hi Experts,
               I am working on BW 3.5 had a r/3 source system which has been formatted recently now when i am trying to delete this source system (while going traough RSA1->source system right click delete) it says "deleting source system failed".i ckecked through t.code sm21 "source system BIWDEV not known.i have also tried to delete it through FM RSAP_BIW_DISCONNECT and RSAR_LOGICAL_SYSTEM_DELTE but nothing is working.There is entry of this source system in RSBASIDOC table.Please help.
    Sanjeev

    Hi,
    try deleting first this pertner profiles with tcode WE20 and then delete the source system....
    if this system is not up anymore then delete the part profiles, and the RFC connection
    caution; you'll loose all TRules connected to this source system...
    hope this helps...
    Olivier.

  • How to define  the PSA in source system

    hi ALL:
       when i double click the datasource in the source system's  datasource overview , there is an message of "Transfer method 'TRFC with PSA' is not supported by the source system ", and prompt me to define  the PSA in source system  , but i did not known how to define the PSA in source system .can any one tell me.
    thanks a lot!

    Hi
    This becuase of RFC connection problem
    go to rsa1>right click on youe sourcesytem>>check
    if the connection is not good,contact your basis
    cheers,
    Swapna.G

  • How to delete Source system

    Dear All,
    I have created Logical system and assigned it to client. After that when you go to RSA1 , system automatically creates Source System of BIW .
    Now I want to use the different logical system for that I want to delete this automatically created BIW self source system which I am not able to do becuase in Context Menu Delete option is not Visible.
    Please guide me immediateley.
    regards
    Vishal

    Hi Vishal,
    Refer these posts. Probably they help you!!
    Re: How to delete a source system in BW?
    Re: Source system deletion
    Bye
    Dinesh

  • How to delete source system in BI system

    Dear Experts ,
    recently we finished client copy in BI production system to quality system,
    now we are facing problem with source system connections in bI system
    in RSA1 APO production system's source system is comes to BI quality system now i need to delete that APO source system in BI quality system ..please let me the process how can i delete source in BI quality
    can i delete it as below
    log in into BI quality system --> RSA1 --> select source system which i need to deletse --> right click & delete
    or we have any other process to delete it.
    Regards

    Hi Swathimatta,
    Apart from the two ways to delete the source system:
    1.- log in into BI quality system --> RSA1 --> select source system which i need to deletse --> right click & delete
    2.- Execcuting the FM 'RSAP_BIW_DISCONNECT.
    If you cannot delete the source system:
    Use fuction module RSAR_LOGICAL_SYSTEM_DELETE to delete
    the source system:
    1 - Go to SE37.
    2 - Run fuction module RSAR_LOGICAL_SYSTEM_DELETE.
    3 - Fill with the parameters as mentioned below:
          I_LOGSYS          = FUENTE
          I_FORCE_DELETE    = X
          I_NO_TRANSPORT    =
          I_NO_AUTHORITY    =
    Or follow the recommendations from note 140276, Solution 2:
    "You cannot delete the source system. Two cases have to be distinguished:
        o  The source system still exists.
           Switch to Transaction SM59. Find the destination which has the
           same name as the logical system of the source system from field
           SLOGSYS in table RSBASIDOC (see above).
           -  Such a destination does not exist in Transaction SM59. In this
              case, you have to create the destination to the source system.
              Name the destination equal the entry in SLOGSYS from above.
              Then return to the Administrator Workbench and repeat the
              deletion.
           -  The entry exists but a remote login is not possible. Correct
              the communication parameters.
           -  Everything works. Change to Transaction SE37, function module
              RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS =
              <log. name of the source system>, I_FORCE_DELETE = 'X'.
        o  The source system no longer exists or was replaced with another
           source system with the same IP address.
           Proceed as described in the first case but make sure, that the
           field 'Target host' contains a not existing server in the
           maintenance screen of the destination (Transaction SM59). If
           necessary, change an existing entry. Later when you delete, the
           system asks you whether you want to delete, although the source
           system is not available. Select 'Ignore'. "
    I hope it can help you.
    Regards,
    Fran.

  • How to delete source system (popup window)

    Hi All,
    I want to delete the source system
    RSA1 - Source Systems - system and Delete
    but for every using "Transfer structure" i receive the popup information window and i have to confirm this window. It takes much time.
    Do you know anybody the another solution ?
    Thanks in advance for advice
    Martin

    Martin,
        That is the only way. It would ask you to put it in transports and larger the objects longer it takes. There is no other way as far as I know.
    Thanks
    Shabna

Maybe you are looking for

  • IPod Shuffle (1st Gen) is no longer seen in iTunes or Windows (Vista)

    I had it working flawlessly in Vista with iTunes then yesterday I plugged the shuffle in and Vista said it was an unidentified usb device. So iTunes no longer sees it and it doesn't even come up in Device Manager. Things I've done so far... 1. Reset

  • Is this a bug in CF 8

    I have the following code (just as a sample): <CFQUERY NAME="MyProjects" DATASOURCE="DSN_Name"> select PID, PName from projects </CFQUERY> Assume the above query will bring only one record, I'm using CF 8 with latest hot fix, running on windows serve

  • In Adobe reader "An error occured when signing in"

    In Adobe reader "An error occured when signing in"

  • Weird sounds on Audigy 2ZS,need he

    Hi all,i having problem when i watching dolby digital?dvd. The problem is when i watching dvd it got some "Dit Dak Dit Dak" sounds come out and in my dvd software setting i have on SPDIF output let my Audigy 2ZS decode it. Is it this is soundcard pro

  • Droid razr date and time settings

    Latest update for my Motorala Razr has incorrect date and time settings will not correct