How to replace multiple files in same location Indesign CS6

Hi everyone please help me with this challenge if you are avialable it will be greatly appreciated!
Ok I have a spread of about 60 pages in indesign. I created a template where I have differnt PDFs in each section. I have 3 different PDFs per page totalling about 180 different PDF docs in my in design file. Every week I have to go in to replace those PDFs with the new ones. They have to be in the exact same place and sized the same way since they are setup to print on one of our printers. In indeesign CS3 I would just do Command D and then I would select all 180 PDF documents. It would import all of them and I would just click on each area of the PDF holding down "Option" and it would automatically size the PDF to fit in the same way the previous PDF was. Basically just replacing it. I did this for all 180 relatively simple. Now that feature is gone! I can't for hte life of me figure out how to do this. I've tried everything and it's not working.
Can any one help me?

Make Object style to your frames and setting the Frame Fitting Options>Fitting
Also try: tomaxxiPlace2 script, i test it with indesign cs6 and it work fine.
http://indisnip.wordpress.com/2011/01/13/script-tomaxxiplace2/#more-960

Similar Messages

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

How to create multiple instance on same database

Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]

How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

How to replace multiple occurences of space in a string to a single space?

How to replace multiple occurences of space in a string to a single space?

Hi,
try this code.
data : string1(50) type c,
          flag(1) type c,
          dummy(50) type c,
          i type i,
          len type i.
string1 = 'HI READ    THIS'.
len = strlen( string1 ).
do len times.
if string1+i(1) = ' '.
flag = 'X'.
else.
if flag = 'X'.
concatenate dummy string1+i(1) into dummy separated by space.
clear flag.
else.
concatenate dummy string1+i(1) into dummy.
endif.
endif.
i = i + 1.
enddo.
write : / string1.
write : / dummy.

Reading Multiple files of same kind wth File adapter urgnt plz solve this.

Hi evry one
i am new to BPEL and i am in need of file adapter functionality. I have a folder which has files of naming convention
NSD 123-222 090714T01:23:23 if i suppose i have some hundred files in that folder and i am pointing the file adapter to read files from that folder.The pois all the files have same naming convention with different time stamp and at the same time if all the files have same start name all of the files get picked up at the same time my concern here is if i want to process each file in a while loop as soon as the file get picked up according to the target schema.what can be the condition inthe while loop so that each file gets processed in the loop.
Is there any process where i can count the number of files in the folder so that i can make use of that count in the while process.The files in the folder are in xml format these multiple files of same target schema.
please help me in figuring out this issue.
Regards,
P

There is no direct solution in my opinion. What you can do is - write some java code (either embedded activity or through WSIF). In this code you access the directory and count the files, return that count to your bpel process...then use the while loop with sync read

How to upload multiple files using wicket

Hai,
how to upload multiple files using wicket at a single browse.
any suggestion?
Thanks in advance

You have to do this your self by either (as vinod said) using a different component (not present in adf) or implementing this:
1) allow the user to select multiple filenames (somehow)
2) zip them together
3) upload the zip
4) unpack the zip on the server
5) work with the files
Timo

How to upload multiple files in Webdynpro using File upload Screen Element

Hi Experts,
Can anybody tell me how to upload multiple files/pdfs in webdynpro using file upload screen element, and also please tell me what is the maximum storage limit of RAWSTRING data type,Advance Thanks.
Regards,
Sandesh

Hi Sandesh,
this is simply not supported, not in WebDynpro nor in standard HTML.
A workaround is to upload a ZIP with all files and on server side unpack the ZIP and operate on the single files.
I hope it will help u..
----------------------OR-------------------------
As you know using File upload UI element we can upload only one file at a time. There may be a scenario where user may want to upload any no of files at a time which is not determined at design time. This can be acheived using the ACF UpDownload UI element which requires a security whiltelist to be created
http://scn.sap.com/docs/DOC-2270
----------------------OR-------------------------
You can use Table UI element.
Regards,
Deepak Singh

Its urgent how to use calss file of jar located in lib folder

how to use calss file of jar located in lib folder.
i want to use RowSetDynaClass class which is in beanutil jar file which is in my lib folder .if i use that class in my jsp following error is coming.
Class RowSetDynaClass not found.
RowSetDynaClass resultSet = new RowSetDynaClass(rs, false);
how to access class in jar file.
please help

You have to either refer to the class in its fully quallified name, or import it into the JSP:
<%
some.full.packagename.RowSetDynaClass resultSet = new some.full.packagename.RowSetDynaClass(rs,false);
...-or-
<%@ page import="some.full.packagename.RowSetDynaClass" %>
<%
RowSetDynaClass resultSet = new RowSetDynaClass(rs, false);
...As long as the class has public visibility and you have re-started the server/servlet context since you added the JAR.

How to import multiple files to the frame area?

How do I import multiple files to create animated GIF's. I
know how to import multiple files into the Fireworks, but if I'm
trying to create an animated gif that has alot of files, How do I
get them into the frames area. It is really a pain importing each
and every file one at a time frame by frame

merry1
after you bring in all your images to the canvas, select all
and in the
Frames Options drop down, select Distribute to Frames.
You can bring multiple images onto the canvas by copy and
pasting from
the folder(s) where they exist.
alex
merry1 wrote:
> How do I import multiple files to create animated GIF's.
I know how to import
> multiple files into the Fireworks, but if I'm trying to
create an animated gif
> that has alot of files, How do I get them into the
frames area. It is really a
> pain importing each and every file one at a time frame
by frame
>

How to avoid multiple listing for same artist?

How to avoid multiple listing for same artist?

Sounds like there might be blanks in the artist name.
For instance "Lou Reed" and "Lou Reed_" will not match.
(Pretend the underscore _ is a blank).
Select all the Lou Reed songs, Get Info, and type "Lou Reed" in the artist field. That should fix it.

How to create multiple BOM of same parent item?

Hi All,
Please guide me, How to create multiple BOM of same parent item? I tried but system throws a message as same Parent Item already exist in the table. I am afraid if system supports this functionality or not?

Hi,
You are welcome.......
Well the exact process would be as I mentioned in my previous post.
1. Create the BOM for an item
2. Choose this item in the Production Order
3. Then in this Production order you can change/ delete/ add whichever item you want .
OR
If all the child items are completely different from the original BOM then you can use the Special Type BOM in which you can always create the BOM while creating the Production Order itself. There is no standard BOM here.
J Nagesh

Replace multiple files

Hey folks, is there a way to batch replace multiple files within AE CC? Or would this require a script?
I have around 100 or 150 precomps that I need to replace with png image sequences.
Thanks for your tips!
ML

Don't know but i'd really love this new feature in futur update

HT3529 My apps Location has changed, how to resotre it back to same location.

My apps Location has changed, how to resotre it back to same location.

There's no option for sorting Apps and Folders, you have to do it manually, best solution if they are many is to connect your device to itunes, tap on the "iPhone" at the yop left, then go to the apps section, and do all the sorting you need then click "Apply".

Hi how/where do I upgrade plug-ins for InDesign CS6 6.0.6?

Hi how/where do I upgrade plug-ins for InDesign CS6 6.0.6?

6.0.6 is CS4, not CS6 (which is version 8).
Why do you need to upgrade plugins? Are you getting an error message trying to pen a file? That meas the file was saved from a newer version of ID, and you'll need either the newer version, or an IDML file exported from the original. You can't upgrade plugins to make this work.

How to replace multiple files in same location Indesign CS6

Similar Messages

Maybe you are looking for