How to avoid multiple listing for same artist?

How to avoid multiple listing for same artist?

Sounds like there might be blanks in the artist name.
For instance "Lou Reed" and "Lou Reed_" will not match.
(Pretend the underscore _ is a blank).
Select all the Lou Reed songs, Get Info, and type "Lou Reed" in the artist field. That should fix it.

Similar Messages

  • How to avoid multiple session for the same username

    I need suggestions on implementing single user login , like My system has a user with a username jdavid and my application should not allow two different sessions for the same username jdavid , can one session peep into all other session
    to see if the any has a usernaem jdavid, I am basically looking for some pattern if any available for restricting multiple session for the same username . like jaas or any other security api provides this ?

    Store a Map<User, HttpSession> in application scope and let your application intercept on that. On login, just check if the User is already there, then get the associated HttpSession, invalidate it and replace it by the current HttpSession, else just store the current User-HttpSession pair in the map. On logout obviously remove the User-HttpSession pair from the map.

  • Multiple Listing for same Podcast

    When I look at my podcasts in grid view, it shows two, or even three folders for some podcasts. But each folder doesn't have all the episodes; they're split between the folders. In list view or cover flow, all episodes are listed under just one folder, like normal.
    Also, on my iPod, some episodes are listed more than once. But each listing points to the same file.
    The multiple listings on my iPod existed before I upgraded to iTunes 8, but I don't know if multiple folders existed in iTunes before I upgraded.
    I think iTunes might be putting another listing for these episodes on my iPod each I time I sync, though I have no idea why it would be doing this.
    I've got a 60 GB iPod video, and it's only in the past month that it's been listing stuff multiple times.

    Sounds like there might be blanks in the artist name.
    For instance "Lou Reed" and "Lou Reed_" will not match.
    (Pretend the underscore _ is a blank).
    Select all the Lou Reed songs, Get Info, and type "Lou Reed" in the artist field. That should fix it.

  • How to avoid multiple LOGIN with same user in database.

    Hi All,
    Using database triggers how to control multiple logins of a pertiuclar user.
    thanks in advance

    Don't forget to activate the RESOURCE_LIMIT parameter, which default is FALSE :
    alter system set RESOURCE_LIMIT = true;
    Laurent, I had a similar problem some time ago : I didn't want to avoid multiple access, but only control who was doing what. That's because moving from Client/Server to Web the TERMINAL column in V$SESSION becomes useless.
    I tried your solution, but I had to give up with it, because in my Forms9i application some forms call Reports, which generate a new session.
    I decided to use DBMS_APPLICATION_INFO, and this is satisfactory for my requirements, but I'm interested to discover other solutions.
    P.S. with my solution I'm able to limit accesses, because in the CLIENT_INFO string I put, among other things, the
    application user, so I can control if an user is already connected. The problem is that existing applications have to be modified .....:-(

  • How to avoid multiple logins to same application

    Hi, I am using APEX version  4.2.1.00.08. I have a function for AD LDAP authentication. The authentication scheme has Set Cookie Attributes, Cookie Name SESSION_COOKIE. I have been using this for years on previous versions of APEX. As part of the 4.2 upgrade I would like it if users did not have to log in many times a day to the same application. I email links to the application, but even if they are already logged in, it opens page 101 in a new browser window and requires a second login. The email contains a link like this https://server/apex/f?p=102:2:::NO::P2_RECORDID:200000:/ I have read multiple posts, for example "Access two applications with one log in" and http://apps2fusion.com/at/64-kr/413-maintaining-authentication-between-apex-applications but I am still clueless. If a user has logged in once and has an APEX session, is it possible to click the link in the email without having to log in again to the same application? There is an after submit process Set Username Cookie and Onload Before Header process Get Username Cookie. Do I need Set Session Cookie and Get Session Cookie processes? Thanks for your time.
    Peter
    FUNCTION used for AUTHENTICATION SCHEME
    create or replace function ad_auth(
        p_username        in        varchar2,
        p_password        in        varchar2)
    return boolean
    is
        l_user            varchar2(256);
        l_ldap_server    varchar2(256)    := 'DC';
        l_domain        varchar2(256)    := 'servers';
        l_ldap_port        number            := 389;
        l_retval        pls_integer;
        l_session        dbms_ldap.session;
        l_cnt            number;
    begin
        l_user            := p_username||'@'||l_domain;
        l_session        := dbms_ldap.init( l_ldap_server, l_ldap_port ); -- start session
        l_retval        := dbms_ldap.simple_bind_s( l_session, l_user, p_password ); -- auth as user
        l_retval        := dbms_ldap.unbind_s( l_session ); -- unbind
        return true;
    exception when others then
        l_retval := dbms_ldap.unbind_s( l_session );
        return false;
    end;

    Hi Peter,
    I'm not familiar with LDAP but from a security point of view, I think it is wise to force your users to login if you sending them a link to a protected site. Just in case they forward the email or sharing the same computer. Could you post some of the code that you use to produce the email? It maybe that you need to concatenate &SESSION. where the session id would be in the url
    Regards,
    Alistair

  • How to avoid multiple users accessing same test data via parameterization in LR??

    i am using LR11.5, i have the following test data&colon;
    TestData
    1
    2
    3
    4
    5
    when i run this script from Controller with 3 users LR picks it as user1->1, user2->1, user3->1
    How do i achieve this case: user1->1, user2->2, user3->3 ??
    Any help would be great.

    I have a related question. i created 2 websites/domains then i went to users and created 2 seperate "network" users then i went to ftp and selected each website and added only user A to site A and user B to site B. what's weird is that when i try to ftp using either of the users it seems to land on the same site. i looked at shared security for the folders and it only shows user a on site a folder and user b on site b folders. am i doing somehitng wrong or is this how it works in mountain lion server? i just want to give the domain owner ftp access so they can manage their files and only thier files. i also had to turn on open directory so that it would not create a local user but a network user. do i need to turn that off and just deal with having a bunch of local users as ftp user? i want to host multiple websites on the server and NO users remote on to server besides ftp.
    edit 1: i only have 1 IP running on the server which i don't think it has any affect on this but thought i mention it :-)
    edit 2: i just noticed one more thing that may help. i used filezilla to remote in using both users, one at a time. it seems to allow both users in but then it shows same directories. i then created a file using the one that was not supposed to have acces and it never sows up. but if i remote desktop to server i can see the new file in the correct folder. so it may have something to d o with the directory listing.

  • Multiple Listing for One Artist

    First, click on the link to view a picture:
    http://www.freeimagehosting.net/uploads/bf3a7e5fdb.png
    So why are the Minutemen listed four times in a row when all my Minutemen MP3's are a) ripped from my own CD's, and therefore b) uniformly and tagged?
    I'll go into each and every one of those Minutemen listings, and find the exact same albums and songs in each and every one. Meaning there is not one single instance of a partial album in anywhere. And I know for a fact that I only have one MP3 copy of every Minutemen album on there, because I've had them all on there for a long, long time. Now, if it was something I just downloaded last night and threw on my iPod before checking it to make sure everything was up to snuff, then I wouldn't be here right now.
    You know what the weirdest part is? Today is the first time this has ever happened to me. And I know my co-worker has had this exact same problem. You know what's even weirder? I plugged my iPod into my computer, selected each an every Minutemen song on there (which only ever appear once, btw) and...
    http://www.freeimagehosting.net/uploads/0d63fd0046.png
    ...am told that the artist tag is, in fact, THE EXACT SAME THING FOR EVERY FILE.
    So how does this happen, how do i prevent this in the future, and what are some good Mac-compatible hard drive MP3 players that don't glitch nearly as often as the iPod?
    EDIT: So I went and re-edited the ID3 tags for the files on the iPod itself and, low & behold, the problem still persists. Next step: removing all the songs from my iPod and putting them back on there. I'll keep you posted.
    Message was edited by: Space Butler XIII

    Now the site won't let me edit my original post yet again, so I'm going to have to "Reply" to my own thread.
    After removing all the Minutemen songs from my iPod, and re-editing all the ID3 tags for the MP3 files on my hard drive, then dumping all back onto my iPod, I'm still having the same problem.
    <Edited by Moderator>

  • ITunes doesn't seem to know how to count,  multiple references for same mp3

    Have had several MP3 players, but just got my first ipod.
    I have 5899 mp3 files under the My Music directory stucture.
    The two other programs I use to manage my music (Rio Music Manager, and Media Monkey) both see 5899 songs and one copy of each file.
    Also a directory from the CMD prompt verifies 5899 mp3 files.. totalling about 24GB
    When iTunes scans the same directory it shows 10,352 songs or a total of 38.79GB.
    I should be able to put my entire collection on the 30GB video ipod, but because of what itunes is doing, they do not fit.
    I see most all songs with 2-3 references in the library. I have to uncheck 2 of the three to have iTunes only send one copy to the player..
    I have uninstalled iTunes twice and it does the same thing every time..
    Love the ipod, but iTunes needs help..
    Any ideas?
    TIA,
    Bryan
    IBM T43   Windows XP Pro  

    actually think I found my own answer. I have 5 M3U playlists under the directory structure. Synch lists and playlists for my other players..
    I moved them out, then cleared the itunes database, rescanned the directories and only 5899 songs came in..
    Any way to bring my m3u lists in without the dupication?
    Bryan

  • How do I get itunes to not list the same artist more than once?

    How do I get ituens to not list the same artist more than once?  I have tried editing the info, sorting different ways and sometimes it works and sometimes not...it's very frustrating to me to have the same artist listed multiple times...

    Setting a common Album Artist for each Album does most of the work. For deeper problems see Grouping tracks into albums.
    In general you need to make sure that all the values in the tags are used consistently. Same spelling, same capitalization, same accents, no leading, trailing, or multiple spaces, and each value of Artist, Album Artist or Album should only be associated with one value of Sort Artist, Sort Album Artist or Sort Album respectively.
    tt2

  • How to lock multiple user for a transcation code at same time is der any tc

    how to lock multiple user for a transcation code at same time is der any tc
    suppose i hav 15 user and i want to lock 10 user for mm02 who can i to it

    Basis can do a export and import transport, still if don't have connection between boxes.
    or
    check this
    http://www.sap-basis-abap.com/abap/copy-program-variants-from-one-to-another.htm
    a®

  • How To avoid column heading for only total line in ALV list Display

    Hi,
    How To avoid column heading for only total line in ALV list Display.

    Hi,
    to change colunm header field catlog is built
    look at the example below
    Changing column text headers
    use this to change, hide, or alter the ALV columns
    CLEAR: gt_fcat.
    READ TABLE gt_fcat WITH KEY fieldname = 'TEXT1' " ***
    *TEXT1 is your field name
       ASSIGNING <gtfcat>.
    IF sy-subrc = 0.
       <gtfcat>-coltext   = 'Date Type'.
       <gtfcat>-no_out    = ' '.
       <gtfcat>-tooltip   = 'Date Type Text from IT0019'.
       <gtfcat>-seltext   = 'IT0019'.
    keep seltext to '' if u want to hide
    ENDIF.
    regards
    austin

  • How to avoide multiple duplicate entries in adress book?

    How to avoide multiple duplicate entries in adress book? I can add the same contact name and number more than twice and the phone isn't warning me at all!!! I's quite a heck for me.

    not possible from inside AB AFAIK. but you can do the following. in finder open the folder /users/username/library/application support/address book/metdata. switch to the list mode and sort by date modified. quicklook the vcards at the top to see which ones they are.

  • Workflow - how to update multiple list items

    Is it possible to update up to 3 list items with the same information using a workflow?  My scenario is where a company vehicle (registration number) has up to three drivers assigned to it - Driver Name 1, Driver Name 2 and Driver Name 3.   I
    have two separate lists - one for vehicles (fleet list) and one for drivers (driver database).  In my workflow when an item is created or changed in the fleet list, I would like the current vehicle registration to be updated in all three driver records
    in the driver database.  I am not sure if I can do this as I am unsure of what my unique look up would be as I need to be able to tie a vehicle registration to a driver name. Any advice would be much appreciated.
    Thanks

    Hi,
    Refer to the following threads about how to update multiple list items simultaneously.
    http://social.technet.microsoft.com/Forums/en-US/936d05ba-6e86-4f44-bbdb-b3c5c12b2c68/how-do-i-update-multiple-list-items-at-once-in-a-sharepoint-list
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d342b01-1978-40c9-a203-303d145b331e/how-to-update-mulitple-list-items-at-same-time
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8d5b7424-58dc-470b-8142-90755dbdeaae/sharepoint-workflow-change-multiple-items-in-other-list
    Thanks.
    Tracy Cai
    TechNet Community Support

  • How to create multiple instance on same database

    Hi ,
    I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
    Any how if some one can help me with this and can give me links of this it would be great help for me.
    Thank you for reading my problem and helping me !
    Amil
    please if possible mail me on [email protected]

    How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
    I m new to this field....
    Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

  • Reg:Multiple UOMs for same item

    Hi,
    How to define the multiple UOMs for same item.And the item should be converted in one UOM.
    Iam using 9.0 PL.08

    Hi,
    Please check SAP help file:
    http://help.sap.com/saphelp_sbo900/helpdata/en/89/7ca0a701c64e4a97f4ea5a4edca8b2/content.htm?frameset=/en/44/c4c1cd7ca22e17e10000000a114a6b/frameset.htm
    Thanks & Regards,
    Nagarajan

Maybe you are looking for