How to request APEX product enhancements (such as code protection)

Have reviewed and there are posts that go back to at least 2009 inquiring how to protect apex code from being exported in attempt to protect licensed applications.
As everyone is aware, there exists the ability to export an application read-only, but this does not prevent the APEX administrator from the licensee from changing to run and build once the code has been installed by the licensor. While the procedures and functions may be wrapped, there still exist no way of protecting APEX application code which will be the core work of the licensor.
Sure there is the license agreement between the licensor and licensee, but how difficult could it possibly be to add an export option, such as 'export read-only protected', which would prevent modification to run and build at a later time by the licensee?
An otherwise wonderful product still suffers with this major, yet seemingly easily corrected flaw.

johnny wrote:
how to request APEX product enhancements (such as code protection)
Re: Apex 4.2 wish list, but apparently failed to read my follow-up:
Have reviewed and there are posts that go back to at least 2009 inquiring how to protect apex code from being exported in attempt to protect licensed applications.If that's the criteria then Pagination Sub-template and table-less layouts and XHTML Validation and Accessibility would have 3 years priority on it.
As everyone is aware, there exists the ability to export an application read-only, but this does not prevent the APEX administrator from the licensee from changing to run and build once the code has been installed by the licensor. While the procedures and functions may be wrapped, there still exist no way of protecting APEX application code which will be the core work of the licensor.
Sure there is the license agreement between the licensor and licensee, but how difficult could it possibly be to add an export option, such as 'export read-only protected', which would prevent modification to run and build at a later time by the licensee?
An otherwise wonderful product still suffers with this major, yet seemingly easily corrected flaw.However, as usual, the needs of corporate lawyers appear to count more than those of developers, as the Statement of Direction says that APEX 4.2 will include features to protect our rights to our non-standard and non-semantic apps.

Similar Messages

How create a new production order by C++ code?

Hi everybady
I'm trying to create new production orders using a VC++ 6.0,
but as i can't put a new DocumentNumber "It's Read only",
i can't add a new orders. show me sample code plz....
help me....
Thanks

Hello
Docnum will be avaiable when you issed the Production order.
The method on each langugage is the same so hereby i am posting a VB.NET Code,and you can convert it.
The mandartory fields:
ItemCode - you would like to produce
Qty - how many you would like to producce
After you issued the Production order, you must change the Status from planned to Released
of course, you can add more properties.....
Dim oPO As SAPbobsCOM.ProductionOrders = oCompany.GetBusinessObject(BoObjectTypes.oProductionOrders)
        oPO.ItemNo = "ITEMCODE"
        oPO.PlannedQuantity = "QTY TO BE CREATED"
        oPO.PostingDate = Today.Date
        oPO.ProductionOrderType = BoProductionOrderTypeEnum.bopotStandard
        If oPO.Add <> 0 Then
            Dim POENTRY As String = oCompany.GetNewObjectKey()
            If oPO.GetByKey(CInt(POENTRY)) Then
                oPO.ProductionOrderStatus = BoProductionOrderStatusEnum.boposReleased
                ' Here you have a docnum like OPO.DocNum '
                If oPO.Update() <> 0 Then
                    sbo_application.MessageBox(oCompany.GetLastErrorDescription)
                    Exit Sub
                End If
            End If
        End If
Regards
János

How to request enhancement

Hi. Can anyone please tell me how to send Apple a request for an enhancement to iTunes?

Use the Mac OS X Feedback form.

How we can monitor while import request in production system?

dear friends,
will you please explain me
how we can monitor while import request in production system?
and
what are the things we have to monitor during the transport?
thanks
regards
zaheer

Hello Zaheer ,
I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
Check with
tp -v
R3trans -v
if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
During the import, it is important to check the contents of the directories
usr/sap/trans/tmp
and
usr/sap/trans/log
that they are being continously updated which shows import is progressing.
Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
Best regards,
Paul

TS1702 I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through

I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through itunes?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Product Enhancement request process

Is there an official way to submit a formal product enhancement suggestion?
One of the things I miss about BOE XI R2 is the way the CMC constructed the "User List" display. It created the logical equivalent of "page tabs" across the top of the frame, with each "tab" listing the first user on that tab. It was trivial to find the user I was looking for, by simply selecting the "tab" representing the page that contained that user.
I haven't used XI 3, but I've recently installed XI 4.0, and the equivalent "User List" display under "Users & Groups" isn't nearly as easy to use. When I expand "User List" it says "Too many objects". I was thinking that it would be a very simple enhancement to replace that (useless) message with a set of objects representing the pages of users. Each object listed under "User List" could have an object name of the first userid on the page of users. That would give me functionality equivalent to the R2 "page tabs", and allow me to immediately jump to the exact page containing the userid I'm searching for.
I don't mind submitting this suggestion as an official Product Enhancement Request. But, I'm unable to find a description of the process I should use to do that.
Thanks
Bill

Hi,
you could pase your idea at the "IdeaPlace" on the top right of the SDN Page.
The second way would be transmitting a Message to the SAP Support using the Service Marketplace. In this Message you could request it as Feature in future releases.
Regards
-Seb.

How do I submit an enhancement request?

I'm sure I am just missing it in my Adobe.com and forums searches.
How do I submit an enhancement request to Adobe for Acrobat 9.0?
Thanks.

There is a forum specifically for that purpose. I just discovered it and submitted a request.
-Ramon
http://forums.adobe.com/community/acrobat/acrobat_feature_request

How can i closed production verion wise in c223

Welcome, ANILKUMAR BEHERA
Your Control Panel
Your Reward Points
Your Questions
Expert Forums » ABAP Development » ABAP Objects
Thread: how can i get production version value(verid) for luck through bdc.
Your question is not answered.
Mark as answered.
You are watching this thread. To stop watching this thread, click "Stop Watching Thread" below. (Watch Options)
This watch sends emails by default. If you don't want to receive emails on changes in this thread, go to the watch options, un-mark the "Email" checkbox next to the thread's entry and click "Update".
Reply to this Thread   Search Forum    Stop Watching Thread    Back to Thread List
Replies: 0 - Pages: 1 Threads: Previous
ANILKUMAR BEHERA
Posts: 20
Registered: 10/13/07
Forum Points: 0
   how can i get production version value(verid) for luck through bdc.
Posted: Feb 14, 2008 1:32 PM     Edit      E-mail this message      Reply
HI..
i have one requirement..that in c223 tcode while i luck the production version through BDC in my report program as i given bellow...i upload mat.no , plant, production version and 1(for luck)...
req:: i want while i given production version for particlular plant and material no...that production version should be luck....
so in standard tcode c223 how can i get value to compair it with my input production version value then i will close that...
program:::
report ZC2232
no standard page heading line-size 255.
*include bdcrecx1.
Tables : mkal.
data : nodata value '/' .
data : CTUMODE type c value 'E'.
DATA : CUPDATE TYPE C VALUE 'L'.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
data: begin of HEADER OCCURS 0,
data element: MATNR
MATNR_001(018),
data element: WERKS_D
WERKS_002(004),
data element: PLNNR
PLNNR_003(008),
data element: CP_STTAG
STTAG_003(010),
data element: ENTRY_ACT
ENTRY_ACT_005(011),
data element: PLNAL
PLNAL_004(001),
data element: FLG_SEL
FLG_SEL_01_006(001),
data element: PLANTEXT
STLAL_004(002),
DATUV_005(010),
WERKS_008(004),
data element: PLN_VERWE
ktext_005(001),
data element: PLNST
DELKZ_005(001),
data element: LOSGRVON
LOSVN_011(017),
data element: LOSGRBIS
LOSBS_012(017),
data element: PLNME
PLNME_013(003),
data element: PLNME
stlal_014(002),
end of HEADER.
data : begin of it_header occurs 0,
matnr like marc-matnr,
werks like marc-matnr,
verid like mkal-verid,
mksp like mkal-mksp,
end of it_header.
data : exnum(40) type c,
exnum1(40) type c,
cnt type I,
CN(2) TYPE C,
c1 type c value '(',
c2 type c value ')'.
start-of-selection.
parameters: p_file like rlgrap-filename.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
importing
file_name = p_file.
start-of-selection.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = it_header
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
DELETE it_header WHERE MATNR IS INITIAL.
LOOP AT it_header.
*start-of-selection.
*perform open_group.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=ENTE'.
perform bdc_field using 'BDC_CURSOR'
'MKAL-WERKS'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=PICK'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
*>>>>>>>>>>>>>>>>>>>>here what logic can i write****
clear cnt.
do 15 times.
cnt = cnt + 1 .
CN = CNT.
exnum = 'MKAL_EXPAND-VERID'.
concatenate exnum c1 cn c2 into exnum1.
*perform bdc_field using 'BDC_CURSOR'
exnum1.
GET PARAMETER ID 'VER' FIELD EXNUM1.
CALL TRANSACTION 'C223' AND SKIP FIRST SCREEN.
if ( it_header-verid = EXNUM1 ).
exit.
endif.
enddo.
****************************************************end***>>>>>>>>
perform bdc_field using 'BDC_CURSOR'
exnum1.
perform bdc_dynpro using 'SAPLCMFV' '2000'.
perform bdc_field using 'BDC_CURSOR'
'MKAL_EXPAND-PLNTY'.
perform bdc_field using 'BDC_OKCODE'
'=PRFG'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=RW'.
perform bdc_dynpro using 'SAPLCMFV' '2000'.
perform bdc_field using 'BDC_OKCODE'
'/ECANC'.
perform bdc_field using 'BDC_CURSOR'
'MKAL_EXPAND-VERID'.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'BDC_CURSOR'
'MKAL-WERKS'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_transaction using 'C223'.
endloop.
*perform close_group.
*& Form bdc_dynpro
text
-->P_0161 text
-->P_0162 text
form bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
endform. " bdc_dynpro
*& Form bdc_transaction
text
-->P_0351 text
form bdc_transaction USING TCODE.
call transaction 'C223' using bdcdata
mode CTUMODE
update CUPDATE
messages into messtab.
if sy-subrc 0.
message e000(zmm01) with
'Check your input data'.
endif.
endform. " bdc_transaction
*& Form bdc_field
text
-->P_0346 text
-->P_0347 text
form bdc_field USING FNAM FVAL.
if fval nodata.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
endif.
endform. " bdc_field
Pages: 1    Back to Thread List
Threads: Previous
New content since your last visit
Updated content since your last visit

macbook pro, 500gb ,version 10.9.5 ,
all files in open in Quiketime media player how can i closed..whenever i open quicktime all files are open..i have tried to closed by force quit..but whenever i again open quicktime files are still open..
You have basically formed a "poor" habit—i.e., closing apps and assuming they will close any/all open activity windows. The latest versions of Mac OS X now, by default, "remembers" what windows are open when an app is closed. You have three options here:
1) Get in the habit of closing active windows before closing an app to prevent them from re-opening automatically the next time the app is opened.
2) Hold down the "Option" key when selecting the "Quit" menu option (keyboard shortcut "Option-Command-Q") with system preference option in the default mode.
3) Change the default system preference to automatically close active windows in the same manner that older Mac OS X versions did by checking the "Close windows when quitting an app" in the Syeyem Preferences "General" menu.
NOTE: This setting works as a "software switch" for your application's "Quit" menu option. I.e., in the "Unchecked" mode the Option-Quit menu option and keyboard shortcut (Option-Command-Q) tells the system to forget active windows when the app is next opened while the "Checked" option mode tells the system to remember the active windows when using the Option-Quit menu or keyboard shortcut options.
Your choice for settings and/or method of closing apps.

How to access APEX variables within compiled pl/sql function.

Hi,
My initial problem is to create pl/sql code returning column names for my custom calendar report.
There are 7 columns for each day of the week and I want it to be on two rows - first the day of the week, such as 'Monday' and below it (with BR tag) the date, such as '18-08-2008'.
What I want is to set additional tags for underline, italics, etc. on the column heading which date is currently selected for viewing (I have DATE item for this purpose).
But as the code is getting quite complex, I decided to write a function in my schema that would return the column delimited values for the headings.
What I can't do is the following.
1) How do I reference an APEX item value, such as my DATE item? using v('P4_DATE') results in unknown function 'v'.
2) How do I use char-date and vice versa conversion using the already set application format mask, available in APEX 3.1? So that when I change the date format mask within the application, it would still work.
10x and I hope I'm not repeating s.o. else's question.

Hi,
I won't try to create the entire function here, just enough to point you in the right direction.
Create a function something like:
create or replace FUNCTION "GETHEADINGS" (inDATE IN VARCHAR2, inFORMAT IN VARCHAR2)
RETURN VARCHAR2
IS
BEGIN
DECLARE
    vTHISDATE DATE;
    vSTRING VARCHAR2(1000);
BEGIN
    vTHISDATE := TO_DATE(inDATE, inFORMAT);
    vSTRING := TO_CHAR(vTHISDATE, inFORMAT);
    RETURN vSTRING;
END;
ENDinDate would receive the item's date value and inFORMAT receives the date format. vTHISDATE converts the date supplied into a date using the date format and vSTRING turns that into a string, again using the date format. Obviously, this example will just return the original date.
To add styling to any column, just surround the column text with the appropriate tags whilst building up your string. For example:
'<i>' || columnheading || '</i>'Now, in your report's Report Attributes, change the Headings Type to PL/SQL and enter in something like:
DECLARE
vHEADINGS VARCHAR2(1000);
BEGIN
SELECT GETHEADINGS(:P1_DATE_FIELD, :PICK_DATE_FORMAT_MASK) INTO vHEADINGS FROM DUAL;
RETURN vHEADINGS;
END;When you've created the function you need, the string returned should be in the column headings delimited with colons.
Andy

How to request a refund?

Hello,
This is fifth time that I have applied to have a refund due to the skype overcharged.
Your immediate attention and help will be greatly appreciate. Thank you so much.
Please do check the following list:
May 18, 2013
[removed for privacy]
Payment authorization product 1 USD
Eurocard/Mastercard
$1.00
Pending
May 18, 2013
[removed for privacy]
Payment authorization product 1 USD
Eurocard/Mastercard
$1.00
Pending
May 18, 2013
[removed for privacy]
Payment authorization product 1 USD
Diners
$1.00
Pending
May 18, 2013
[removed for privacy]
Payment authorization product 1 USD
Diners
$1.00
Pending
May 18, 2013
[removed for privacy]
Payment authorization product 1 USD
Eurocard/Mastercard
$1.00
Pending
May 18, 2013
[removed for privacy]
Payment authorization product 1 USD
Eurocard/Mastercard
$1.00
Pending
May 18, 2013
[removed for privacy]
Payment authorization product 1 USD
Eurocard/Mastercard
$1.00
Pending
May 18, 2013
[removed for privacy]
Payment authorization product 1 USD
Eurocard/Mastercard
$1.00
Pending
May 11, 2013
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
May 2, 2013
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
April 19, 2013
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
April 13, 2013
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
April 11, 2013
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
March 28, 2013
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
March 19, 2013
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
March 11, 2013
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
February 21, 2013
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
February 15, 2013
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
February 11, 2013
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
January 18, 2013
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
January 11, 2013
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
December 19, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
December 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
December 10, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
November 14, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
November 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
October 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
October 5, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
September 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
August 20, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
August 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
July 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
July 5, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
June 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
May 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
April 23, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
April 23, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Created
April 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
March 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
February 22, 2012
[removed for privacy]
Auto-recharge on low balance
Eurocard/Mastercard
$10.00
Delivered
February 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
January 11, 2012
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
December 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
November 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
October 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
September 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
August 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
July 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
June 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
May 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
April 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
March 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
February 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
January 11, 2011
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
January 10, 2011
[removed for privacy]
Skype Credit $10
Eurocard/Mastercard
$10.00
Delivered
December 4, 2010
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
December 1, 2010
[removed for privacy]
Skype Credit $10
Eurocard/Mastercard
$10.00
Delivered
November 7, 2010
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Delivered
November 7, 2010
[removed for privacy]
Unlimited World 1 month
Eurocard/Mastercard
$13.99
Pending
November 7, 2010
[removed for privacy]
Unlimited World 12 months
PayPal
$142.68
Pending
November 7, 2010
[removed for privacy]
Unlimited World 12 months
PayPal
$142.68
Pending
November 7, 2010
[removed for privacy]
Currency Exchange
Currency Exchange
NT$ 0.00
Delivered

Below is the link where you can see the requirements and instructions on how to request for a refund;
https://support.skype.com/en/faq/FA297/how-do-i-request-a-refund
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

How to integrating APEX with the Oracle eBusiness suite release 11i

I need to integrate Apex with Oracle eBusiness Suite Release11. APEX need to use ERP authentication (user name/password) and oracle APEX pages will be called from oracle eBusiness Relese 11i menu.
I have followed metalink doc. 373604.1 and also looked into http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
I have setup DAD on Apache server, oracle Apps functions/menu and created apex_authorise function and added to my APEX application. I have followed the all the steps from above pdf file.
Here is my issues:
1. When I try to launch a APEX page again it asking me for the user name password
2. If I remove login page from APEX application then I can launch my APEX application but I cannot see any images
3. I need to pass oracle ERP 11i user and responsibility information to APEX. How should I do this?
Any help will be really appreciated
Thanks in advance

Many customers want this and would have hoped that Oracle would have included this as an option. Unfortunately, the left hand(Oracle Apps product managers) don't talk to the right hand(Apex product managers). They totally missed this great opportunity to make life much easier for Oracle Apps customers who have been waiting for this capability that Apex provides. At the present time this is somewhat a black hole. There are people who have figured it out but no one has provided the recipe for everyone else. It's very unfortunate and a complete oversight by Oracle in my opinion. They've got thousands of people developing code but no one had any foresight to see who would use Apex and how they would use it.

How to create a product catalog in crm(by the end user of the system)?

how can we an end user create a product catalog?
what is the diff b/n prod cat and prod?
we download the prod from r/3.
how we get the prod cat done in crm for the customers and consumers and how it is done?
thank you,

hi
first of all we need to look at what is catalog management before proceding with product and product catalog.
You use this business scenario to create a centralized product catalog that contains product descriptions, multimedia objects, pricing, and associated literature. The catalog enables quick and easy customer access to timely and personalized product information, structured in such a way that most meets your customers needs.
Product catalogs are implemented in sales processes and are of particular importance in CRM Web Channel for presenting your products in the Web shop.
difference between the product and product catalog
this is not the thing that product and product catalog are completely different entity.
Product catalog :   A grouping together of products from your product master data, in a structured hierarchy.
You use product catalogs to group together products to present them in the Web shop, Interaction Center, or in other forms of media, for example printed format or CD-ROM.
You can create various catalogs for your products in the product master and use them according to a validity date. For example, you could use certain products for the summer season, and other products for the winter season.
You can also tailor your product catalog to meet other needs by creating catalog variants. For example, you can create a catalog in English with the prices displayed in US Dollars.
so by above definition it is very much clear that products are actually assign to the catalog,i will give you an analogy that museum is a kind of catalog and you add different pictures to the museum,in the same way you add product to the product catalog according to the acatlog variant.
Now how you assign product to product catalog
Product Assignment
You assign products manually or automatically to a catalog area, depending on the catalog type. The product ID, product description, and status of all products is displayed, as is the information as to whether the item contains accessories or if it is a configurable product.
Prerequisites
You have created products in your product master in SAP CRM under Accounts and Products
Process
You select a catalog area in your product catalog, and edit the item list by assigning products to the area.
Manual Assignment
You can assign products manually on an individual basis or by copying a catalog area. You tend to choose manual product assignment for marketing-oriented catalogs that are subjected to editorial controls.
      Individual assignment
      In this case you select the catalog area in which the product should be assigned, manually search for the product in the product master, and assign it to the area.
      Copying items from catalog areas
      You select an area or subarea from another catalog and copy it to your new catalog. The system copies all products from the copied area to the new catalog, as long as they belong to the distribution chain assigned to the target catalog variant. From these products, you can then manually determine which products from the copied area you want to keep and which items you wish to delete.
The following is true for manually assigned products:
      You can activate or deactivate items on an individual basis.
      You can edit the list of accessories for manually assigned products. The system determines which accessories are maintained for the product in the product master and displays them in the item area of the catalog. You select which accessories should be displayed for the product in the catalog and activate them.
      Manually assigned products can be included or removed from catalog views on an individual basis.
Automatic Assignment
You can assign products automatically to a catalog by transferring product hierarchies from your product master to the catalog areas. The categories, items, attributes, and documents contained in the product hierarchy are copied to the new catalog.
You use automatic product assignment mainly for functional catalogs, where products can be copied with very few changes, from the product categories of the product master. It enables a standardized characterization of your products in the catalog.
The following is true for products assigned to the catalog using product hierarchy transfer:
      Product categories which make up the hierarchies become catalog areas in the catalog.
      Product categories in the product hierarchy must be assigned to the distribution chain to which the target catalog variant is assigned. Otherwise the category is not transferred. The same applies to the items, texts, and documents assigned to the category.
      Items are always active and cannot be individually activated or deactivated.
      Accessories maintained for transferred product in the product master are automatically included and displayed in the catalog.
      Transferred items cannot be individually included in catalog views or removed from them. Instead all items of the hierarchy are always contained in the view.
      Lists of characteristics for transferred categories and items can be automatically created when transferring product hierarchies. The transferred values are included in the item overview of the product catalog.
how to create a product catalog
just have a look at this link
http://help.sap.com/saphelp_crm60/helpdata/en/1c/12b2dc57d644d19ea3a5c4156f904f/frameset.htm
your query regarding the products you have uploaded from the R3,now as above i said how you maintain and create the product catalog ,you just assign the products uploaded from the R3 to the product cataloag created in CRM.
more detail info you can see in these links
http://help.sap.com/saphelp_crm60/helpdata/en/91/be9642e5ef0731e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/27f09d25da5a68e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/037716cfc604a9e10000000a114a6b/frameset.htm
if you read carefuly what i have said,it is pretty easy to implement ,you will see it yourself
guess it will help you
do revert back in case of any doubt
best regards
ashish

Modify request in productive system

Hi expert,
Users want to modify requests in productive system. These request are been created in development and transported in production.
And, in fact, I would like to retransport request modified in production to development.
No problemes for authorization but I would like to know, what configuration to do in productive system (order BEx, parameters in rsa1/ transport connection).
I tried to create :
- a transport request for BEx
- object changeability : everithing changeable for query element
But changes are not registered in the BEx transport request.
Thanks in advance for your help.
Daniel

Hi Daniel,
In your systems you have something called a Transport Route. This is a route that it says to a request where it would be transported. I think your productive system may be closed for modifications from transaction SCC1, but you allowed BEx modifications from the object changeability customizing, but this won't collect your modifications in a request, because of SCC1 customizing (and that´s correct). That's how SAP works.
So, if you want to transport from PRD to DEV, you may need to create a new transport route from PRD to DEV, but that's not a good option, and i think basis people wouldn't be neither. Then, you should manually copy BEx modifications from PRD to DEV, and to leave the system consistent, then transport it to PRD in a request. If you want to have always the systems consistent, then you should disable object changeability to BEx objects, and always make modifications in DEV and transport them to PRD.
Hope it helps.
Regards,
Diego Lombardini

How do we create Explicit enhancement ?

Hi All,
How do we create Explicit enhancement, when we dont have any enhancement point or section in SAP source code.
Note: I know how to Implement point or section ..... but i like to know how can we create.
Thanks
A

Hi,
For your reference, let's see how to enhance a standard SAP program using an Implicit Enhancement
Option.
Let us use program RSFTP002 u2013 Itu2019s a program used to test FTP connections.
In this example, we will unmask the currently masked password field.
Open the program in the ABAP Editor (SE38).
Execute it to bring up the parameter list.
Note the asterisks in the Password field.
To view the places where we can implement these enhancements, go back to the previous page (the one
containing the code) and click on the Enhance button (before the Syntax Check button) or press Shift + F4.
Note: Enhancement options are only present in SAP WAS 7.0 and above.
Then Navigate to Edit -> Enhancement Operations -> Show Implicit Enhancement Options.
You will be shown the places where Implicit Enhancement Options are present,
There will be two such spots in this particular program u2013 One at the end of the result table definition and the other at the end of the program.
To implement an enhancement option, right click in the orange area -> Enhancement Implementation -> Create.
Choose an enhancement name (ZFTP_PWD in this case), give it a description and if needed a Composite Enhancement Implementation name and press enter.
Save it as a local object or in a package (as the case might be).
In this example, we shall change the visibility of the password field and show the password. This is done by looping at the screen and changing the invisible parameter of the PWD field to u20180u2019.
Once the Enhancement Implementation is created, the following code is inserted into the program,
$$-Start: (2)----
ENHANCEMENT 1 ZFTP_PWD.
ENDENHANCEMENT.
$$-End: (2)----
ZFTP_PWD is the name of the implementation that we gave.
1 indicates that this is the first implementation in this program.
We can put out code inside the ENHANCEMENTu2026ENDENHANCEMENT block as shown below.
Follow the usual procedure of Syntax Check, Save and Activate.
Now execute the program again to see the parameter list.
Note that anything typed in the Password field is now visible.
Hope this surely help u..

Forum on Product Enhancement for OVM

I am a current Virtual Iron user. I am still holding out for OVM ver 3..... The way its sounding, 2011 may be the release date? Virtual Iron had many Forums, one was for customers to give product enhancement ideas. Then techs would respond if the idea was sound, or indicate if it was scheduled for future release.
Is there now, or could one be created, for oracle VM users to leave their ideas for enhancements?
Thanks,
-Shane
Edited by: user11351696 on Mar 25, 2010 7:01 AM

I found out how by clicking on the Edit button. but it doesn't stick. any page change and it reverts. so it's still buggy. please fix. thanks. I really didn't need the nasty comments.
this is simply bug report. you can use it to improve your web site or drop it.
frankly it's been difficult trying to use my computer since just about very time I try to use something it's broken in some way. I have had enough. I want stuff that works and works well.
that's what I want for my clients.
blessings. hope your day goes better.
tech support I can understand is a tough job dealing with other people's problems all day. and frankly I have been rough on tech support due to either new trainees, which I try to train with some new knowledge from my computer repair and software engineering skills - which sometimes they take wrong or I try to
I have to be careful in even making corrections to something wrong they have said, and frankly, I still blow it.
most of the time I want to submit a bug report to help a company improve their product when I find something broken, and I can't stand program bugs. still learning about personality types and how to deal with people.
I am just trying to give you an idea of some personality types, how I think business ought to be done.

How to request APEX product enhancements (such as code protection)

Similar Messages

Maybe you are looking for