Modify request in productive system

Hi expert,
Users want to modify requests in productive system. These request are been created in development and transported in production.
And, in fact, I would like to retransport request modified in production to development.
No problemes for authorization but I would like to know, what configuration to do in productive system (order BEx, parameters in rsa1/ transport connection).
I tried to create :
- a transport request for BEx
- object changeability : everithing changeable for query element
But changes are not registered in the BEx transport request.
Thanks in advance for your help.
Daniel

Hi Daniel,
In your systems you have something called a Transport Route. This is a route that it says to a request where it would be transported. I think your productive system may be closed for modifications from transaction SCC1, but you allowed BEx modifications from the object changeability customizing, but this won't collect your modifications in a request, because of SCC1 customizing (and that´s correct). That's how SAP works.
So, if you want to transport from PRD to DEV, you may need to create a new transport route from PRD to DEV, but that's not a good option, and i think basis people wouldn't be neither. Then, you should manually copy BEx modifications from PRD to DEV, and to leave the system consistent, then transport it to PRD in a request. If you want to have always the systems consistent, then you should disable object changeability to BEx objects, and always make modifications in DEV and transport them to PRD.
Hope it helps.
Regards,
Diego Lombardini

Similar Messages

  • Problem during import of 121 transport requests to productive system

    Hello
    We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in  TRJOB  as well).
    In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
    In SM37 I can see it as  job "RDDGEN0L" with  repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting  that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
    For fist two indexes I know they are not present  as objects "LIMU""INDX" in any transport request beeing imported.
    Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
    Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
    PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
    There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
    Does anyone knows workaroun to solve production

    are you importing these transport requests simultaneously into production?
    I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
    Rohit

  • How we can monitor while import request in production system?

    dear friends,
    will you please explain me
    how we can monitor while import request in production system?
    and
    what are the things we have to monitor during the transport?
    thanks
    regards
    zaheer

    Hello Zaheer ,
    I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
    Check with
    tp -v
    R3trans -v
    if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
    During the import, it is important to check the contents of the directories
    usr/sap/trans/tmp
    and
    usr/sap/trans/log
    that they are being continously updated which shows import is progressing.
    Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
    If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
    If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
    When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
    Best regards,
    Paul

  • Modify Query in Production System !

    Hello SDN s,
    How ya all ?
    We want to Modify a Query by inserting one more <b>InfoObject in the Production System</b>. When we try to <i>Drag & Drop</i> the InfoObject from the Dimension to the <i><b>Free Characteristics</b></i> it showed <b>blocked symbol</b> and hence we are unable to modify the Query.
    We do have to Query in the Development but cannot use that for Transport as it holds another Query Structure which is used by another Production System.
    Could anyone suggest us how to modify the Query ?
    Will there be any authorization to maintain for the user ?
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hello Murali,
    Could u list down what are all the Authorizations we have to maintain and where it has to be maintained, in SU01 or some other Transaction ?
    Hello Srini,
    I got this doubt earlier and checked the entire content, the object is not there.
    Hello Edwin Harpino(A.H.P),
    I will try this and come back with the result !

  • Track Requests in Production System

    Hi Experts.
    I'm trying to find a way to get all requests that were transported to production system in a particular date.
    Do you know any table where I can find this information?
    I was looking in 'E070' tables group but it's seems like none of them return what I want.
    Thanks in advance.
    Flavia

    Hi,
    E070 table only stores the Transport request status and transported date and .
    try this way by passing the field values to E070 table..
    TRSTATUS    = 'R'       "transport released...
    TARSYSTEM = "you PRD system name
    AS4DATE     = the date you want to pass
    Prabhudas

  • Infosource invisible in production system

    Hello,
    We are facing a unique problem that we are not able to find the Info source for a ODS and one Infocube in our Production system. In Quality system it was working fine and we could see these Infosources. But on transporting the complete devlopment to Production system , we could not locate the required Infosources.
    As a matter of fact,these Infosources was available in the data flow for the Cube,
    and we could go to the infosource by double clicking it in the dataflow. But the same was not visible in the Infosource tab in AWB in production system.
    We tried various Options like:
    1 RSA1 -> Infosource -> from MENU settings -> display generated objects -> and check the radio button show generated objects. Still the infosource was not visible.
    Can anyone please provide some inputs to it.
    Thanks,
    Vipul

    Hi Anil,
    Yes, you are right; my Application component had not been transported to Production System.
    My Infoareas are lying in unassigned nodes and so the info-objects.
    But i dont able to understand why my application componet is not been transported to Production system. When it succesfully transported to Quality system where all things are working fine.
    I have transported the same request to production system as well. Can you provide some insight to it.
    And to other replies i can say that i cant replicate and activate Data Sources in Production system. I have already done these steps in Development system.
    Thanks and regards.
    Vipul

  • Proxy generation Problem in Production system

    Hi Experts,
    I have consumed WSDL file and created Client Proxy in development system.which is working fine
    After testing it is Transported to the Quality system and Production system both.
    In Quality system Proxy is generated properly and functioning properly.
    But in Production system, Proxy is not generated and even in Tcode SE80 it is not displaying.
    How to solve this problem?
    Please suggest.
    Thanks in advance.
    Regards
    Jagesh

    Hello Experts,
    After Transporting Request to Production systems, all Dictionary objects are also created but Only Proxy is not created(Not appearing in SE80 under the respective package name).
    Please help me in this.
    Regards
    Jagesh

  • RC 8 will be accept production system

    Hi
    Please let me know RC 8 ( BI) will accept import this request to production system or not?
    I got RC 8 many of the request numbers, but all request numbers what ever the information i required i got all objects what ever i got RC 8.
    please let me know

    Hi Suneel,
    If your requests are imported with RC 8, are you able to get all the objects that you want. I would strongly recommend if requests have failed with RC 8 you should create a backup transport request correcting the errors. In case you have corrected the error in next request you should both transports to production one after another and that is the correct practice.
    Hope this helps.
    Regards,
    Viren

  • OVR1 and SR10 not modifiable in production system.

    Hi all,
    We would like tcode OVR1 and SR10 to be executable in our production system.
    We want to skip the change request needed to push the new entries from our development all the way to our production system. I want only to activated the possibility to create the OVR1, SR10, SR11 and SR12.
    Here is the message we get when we try to create in our production system
    Message no. TK430
    Diagnosis
    The system administrator has set your logon client to the 'not modifiable' status.
    Client-specific objects can not be changed in this client.
    System Response
    The function terminates.
    Procedure
    Contact the system administrator.
    For more information, see the SAP Library under Change and Transport System.
    Regards!
    Curtis

    To All,
    The OSS Note 812002 will deactivate the transport requirement.
    There's a config in Solution Manager that must be set also.
    When I get the full Solution I will post it here.
    Regards!
    Curtis

  • Deleting Variable in production system vis Transport request

    Hello,
    I need to delete a variable in production system via Transport request how can we do this?
    Thanks,

    Hi,
    Open the query in BEx in Development system, delete the variable form the query. The pop-up will arise for a new transport request. Capture the query in new request and then transport the same to Production.
    Regards,
    Yogesh.

  • List of modifiable programs & reports in a productive system

    Hi everyone,
    I am trying to determine what objects are modifiable in a system set as productive. I have identified about 50 users who are assigned authorization object S_DEVELOP (activity=02 & auth group=DEBUG) in the production system. However the SAP consultant says that this is not an issue because program modification is not allowed in a system which is set as productive. This makes sense but is it true?
    Is there a report or a table which can list system objects that are currently modifiable? From another forum a user suggested I check table OBJH. This was an excellent tip, however OBJH does not list ABAP programs or reports - just tables, views, etc. Any help will be greatly appreciated.
    Thanks,
    Martin

    Hi Martin,
    These settings are done at client level. Each client can be configured with below options
    We can also view client  details from SALE->sending and receiving systems->logical systems->assign client to logical system.
    <b>Client Role</b>
    Customizing
    Test
    Production
    Demo etc..
    <b>Changes and Transport for client-specific objects</b>
    options are :
    Changes without automatic recording
    Automatic recording of changes
    No changes allowed
    Changes w/o automatic recording, no transport allowed
    <b>Cross-Client Objects changes</b>
    Options are :
    Changes to repository and cross-client customizing allowed.
    No changes to cross-client customizing objects
    No changes to repository objects
    No changes to repository and cross-client customzing objs.
    And I don't think production system/client is allowed to do any changes to reports or dictionary objects. These must have to come from development system via quality system to production.
    Regards
    Manohar

  • Support message and change requests only for production system

    Hi guys,
    I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
    In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
    In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
    Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
    Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
    Kind regards
    Rayko

    Hi Rayko,
    We do not have this option.
    Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
    I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
    Best Regards,
    Fernando

  • Error message while transporting SapScript to productive system

    Hi,
    I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
    The error message is displayed like this:
    <b>R3TRFORMZMEDRUCKN</b> was repaired in this system
    Message no. <b>TW 104</b>
    <b>Diagnosis</b>
    Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
    <b>System Response</b>
    The object is not imported.
    <b>Procedure</b>
    If you still want to import the object, release the relevant repair andrepeat the import.
    Does anybody know something about that problem?
    Cheers

    Hi,
    maybe somebody has already create your form in the productive system. Now you would like to create something already created.
    Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
    And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD.  (in the DEV)
    Rgd
    Frédric
    Message was edited by: Frédéric Girod

  • Index value maintenance directly in a Production system

    Hi,
    Is it possible to control the access to T-code: REAJINDX ( Index value maintenance) by Authorization Management (Profile Generator/Role management) in a closed system (Production) for configuration?
    Authorization Object: S_TABU_NAM
    Activity: 02
    Table: V_REAJINDXCLASS
    The requirement is the Index value maintenance directly in a Production system (closed system for the configuration) through the Authorizacion Management.
    Thanks and best regards,
    Fernando

    Hi Franz,
    First, thanks for your quick response. I haven´t got to solve the problem with these notes. I would like to explain in further detail the issue and the current system configuration.
    The configuration for the Client (T000) is the following:
    Client Role: T (Test) or P (Production)
    Changes and Transport for Client-Specific objects: No Changes Allowed
    Cross-Client Objects changes: 3-No Changes to Repository and Cross-Client Customizing objects
    The configuration for the object VC_REAJINDX (SOBJ) is the following:
    Category: CUST
    Transport: 2-Automatic Transport
    Adjustment: Automatically adjustable
    Current Settings: Marked
    With this configuration at client level and for this object, it is not possible to maintain the Index values in the target client. Then my question (doubt) is if it´s possible to maintain the index values in despite of this configuration by Authorization management (User roles/Profile Generator) for this object (Example: Give authorization to modify this object (in order to maintain the values) to a Key User with a specific role, SU01). Or if it´s not possible, then It´s necessary to change the configuration for the object (VC_REAJINDX) for the fields, Category, or/and Transport,... For this option, it´s necessary to modify the SAP standard using a Developer key and I´m not sure if it is a recommended solution.
    But my client wants to maintain the index values directly from PRD system and not from a DEV system and after transport the updates to PRD.
    On the other hand, the error message that the system shows it isn´t the message number TK430, It is the message nº SV052, No maintenance authorization for requested data (Diagnosis: You have attempted, in change mode, to access data for which you have no authorization.). This is the reason I think, maybe, it is possible to control it through the Authorization management.
    Thanks in advance and best regards,
    Fernando

  • Performing SPAU in Production System

    Dear Team,
    We are in the process of upgrading our Production system from EHP3 to EHP7.
    We upgraded our Quality system with SPDD and SPAU transport requests from Development system and it finished successfully.
    But after upgrading our Kernel in Production system and before performing the EHP7 upgrade, we applied two SAP notes in Production system, these notes were transported from our temporary development(un-upgraded) system(parallel landscape).
    While performing the EHP upgrade in Production system,  SUM has prompted us the below message
    “Decide about Incomplete Modification Transport”
    CAUTION: The program has found the transport "MEDK906662"(our SPAU transport) for SPAU but it does not contain all objects which need adjustment.
    When we checked the log file it show that two objects are missing in the SPAU transport.We suspect these are the SAP Notes which we applied after kernel upgrade and are missing in SPAU transport request.
    Please let me know how we can correct this issue in Production system. I know that SPAU will appear in Production system, but will the system allow me to re-apply/reset the SAP note in SPAU as this system will be un-modifiable.
    Regards
    Imran

    SE06.
    System Change. Global setting "modifiable". Componenents "modifiable". Namespaces "modifiable".
    Client setting-> select client -> Automatic recording of changes, changes to repository and cross-client customising allowed, protection level 0.
    If that doesn't work, give yourself SAPALL and try again.
    If that doesn't work, contact SAP because something is messed up. I've successfully applied notes in P systems during upgrade. Including ones that modify SAP_APPL.

Maybe you are looking for

  • Creation of program for converting the invoices in the PDF format

    Hi Guru Can any one tell me any standard prog. for converting the invoices in the PDF format. All invoices should be send through FTP. Plz help. Thanks

  • Intercompany Netting between Customer and Vendor

    Hi All, I have 2 queries regaring netting of customer and vendor open line items. 1. Is it possible to have netting between vendor of one company code with customer of another company code. Is yes, how do we do that. 2. It is very much possible to ne

  • Drill down on cross tab report

    I would like to know whether it is possible to drill down through groups in a cross tab report.

  • Profiles and Notifications

    Have 8330.  Trying to create filters for audible email alert messages; but when I do, all urgent emails are notifying me.  Any suggestions?  Thx

  • Projects objet in SAP 2007A SDK ?

    Hi,   I'm trying to manage projects (OPRJ table) with the SAP 2007A SDK.  My server is running on PL38 and I can't find an object which will allow me to add, modify or delete a project.   I know that the SAP 2005A SDK doesn't have a project object.