How to request FIOS service in my area?

Hi,
I just moved to my first home in San Bernardino, CA. It is a manufactured home in a park, and I was able to get a great deal and pay it off completely. I was so excited about it, I didn't stop to question the internet service available in the area; afterall, what rock do you have to hide under to not find internet in America in this day and age (or so I thought)?
To my disbelief, only the units on the outer perimeter can get service!!!!!! The only thing that is available to me is DSL, and even then it was a HUGE hassle to get it setup because the technicians have to piggyback the lines from a really messed up terminal along the neighbors' backyards! The speed is so horrible, I just want to cry most nights, and my wife literally has cried on occasion! I download everything from my cell phone because it's faster, and my cell phone service is anything but fast. The only other alternative is Dish, and there's a pathetic 30gig limit per month; that wouldn't even last 3 days between my wife, me, and my roommates.
I don't need TV. I don't need a phone line. Hell, I can even live without heating or air conditioning, but the one thing I need is good internet! I've had to cancel my Hulu and Netflix, completely give up on any form of online gaming, download all my media needs from work or on my cell phone, and overall our entire household is absolutely miserable, to the point that I am considering selling this place to move elsewhere. Not to mention, for my job I need access to internet from home at all times, this is really screwing up my life!
We were on 75/35 and already thinking of upgrading to a higher speed plan, so to put that in perspective we are now getting less than 1/1. I'm not rich, I'm supporting a household of 4 as the only income, but I can afford internet, it's a necessity for me. I am willing to sign away $150 for a long-term contract, even if it's 5 years, that's $9,000 in revenue; I'm no expert, but I'm pretty sure that would cover the cost of laying down some lines! Not to mention, there are more than a hundred units in the park, all the potential customers Verizon could have would definitely be to their monetary advantage. I just can't understand why they don't want to lay down some lines?
Anyway, I don't have much knowledge about this industry so I'm not sure where to begin to petition for this request. If needed, I can personally go door-to-door and get committed answers for the need for FIOS in our park, I know for a fact I'm not alone in my frustrations here. There's not much I won't do in order to get some decent internet! I hope someone can help point me in the right direction.
Thank you all for your help!

I was given the equipment Verizon gave me. A DSL modem. What else do I need? I've certianly had modems in the past provided by other services, but they would at least offer what they promised... which is what... 3-5Mbps? Let me check again...
Yes, it was "High Speed Internet" in which I was neglected to be mentioned about when I ordered...
-I checked my speed test, my download speed is 1.95 Mbps, my upload is not even .07 THIS IS EVEN AFTER restarting the modem, you know, turning it off, waiting 1 minute, then plugging it back in.
-The modem is EXTREMELY hot and it isn't even near any other equipment.
-I can't even go to TWO pages at a time when they load. Multitasking is near impossible, even when I had AT&T's service at the same speed, it would allow me to go to another page while another loaded or downloaded something. WEBSITES that don't even require even a LITTLE bit amount of bandwidth.
To further insult, I am getting emails and phone calls from Verizon telling me that my "internet connection speed" is up to code, which is complete and utter **bleep** to put it in short terms. It is a CHORE to go to this website alone to respond.
I'm fully aware NOW that FiOs is out of the question and requests are impossible.
Seriously... HOW AM I SUPPOSED TO GET THE SEVICE I REQUESTED?

Similar Messages

Is there someone to talk to about REQUESTING FiOs Service in my area?

Hi, I'm a former AT&T internet user
When I moved, I was excited about actually getting rid of AT&T as they were giving me TERRIBLE internet speed for an overblown price. I was looking up Verizon and was excited that I could get a FiOs internet, FINALLY. It even said that it was available in my area.
I move in... Three days I realize the service I received was NOT Fios, it was "High Speed DSL" and I come to find that it's EVEN WORSE than my AT&T service...
THIS IS UNACCEPTABLE! I am tired of this, I have to spend my days sending and receiving large video files for my line of work, and I'm FORCED to take long periods of time to wait for things to finish before I can do anything else. And even then, my girlfriend who lives with me has to wait as well in order to make transfers for her line of work with the wifi.
WHAT MAKES IT WORSE! When my computer is idle, IT WILL HALT THE UPLOAD OR DOWNLOAD PROCESS!!!!!! This is something brand new that came to my attention and I don't know how to fix the problem because it happened as soon as I got Verizon.
THERE HAS TO BE SOME SORT OF REQUEST EMAIL OR LINE I can contact in order to speed up the process of getting FiOs in my house. The whole "we'll contact you when it's available" could take months to YEARS and we will still get no results.
I will go to the Verizon office myself to talk to someone about it to see if I can get any results to this problem, I am tired of the crap internet service I'm getting.
Otherwise, if I have to, I will immediately cancel my service and resort to getting Warner Cable instead. I am sick and tired of waiting and I'm not about to have my line of business ruined because Verizon continues to advertise something they can not provide.
From a hopefully-not-also-FORMER Verizon user

I was given the equipment Verizon gave me. A DSL modem. What else do I need? I've certianly had modems in the past provided by other services, but they would at least offer what they promised... which is what... 3-5Mbps? Let me check again...
Yes, it was "High Speed Internet" in which I was neglected to be mentioned about when I ordered...
-I checked my speed test, my download speed is 1.95 Mbps, my upload is not even .07 THIS IS EVEN AFTER restarting the modem, you know, turning it off, waiting 1 minute, then plugging it back in.
-The modem is EXTREMELY hot and it isn't even near any other equipment.
-I can't even go to TWO pages at a time when they load. Multitasking is near impossible, even when I had AT&T's service at the same speed, it would allow me to go to another page while another loaded or downloaded something. WEBSITES that don't even require even a LITTLE bit amount of bandwidth.
To further insult, I am getting emails and phone calls from Verizon telling me that my "internet connection speed" is up to code, which is complete and utter **bleep** to put it in short terms. It is a CHORE to go to this website alone to respond.
I'm fully aware NOW that FiOs is out of the question and requests are impossible.
Seriously... HOW AM I SUPPOSED TO GET THE SEVICE I REQUESTED?

How to retrieve web service results that are stored in an array?

Hi, everyone,
I am using a manually created web service reference in APEX3.0.1 to call an external web service for a simple company search. Here is the WSDL:
http://ws.strikeiron.com/DnBBusinessProspectLinkage2?WSDL
The web referene is tested fine. And here is a sample test result:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Header xmlns="http://schemas.xmlsoap.org/soap/envelope/">
<SubscriptionInfo xmlns="http://ws.strikeiron.com">
<LicenseStatusCode>0</LicenseStatusCode>
<LicenseStatus>Valid license key</LicenseStatus>
<LicenseActionCode>7</LicenseActionCode>
<LicenseAction>No hit deduction for invocation</LicenseAction>
<RemainingHits>4921</RemainingHits>
<Amount>0</Amount>
</SubscriptionInfo>
</Header>
<soap:Body>
<CompanySearchResponse xmlns="http://www.strikeiron.com">
<CompanySearchResult>
<ServiceStatus>
<StatusNbr>213</StatusNbr>
<StatusDescription>Successful search</StatusDescription>
</ServiceStatus>
<ServiceResult>
<Count>2</Count>
<CandidateCompanies>
<CandidateCompany>
<CompanyName>MSC SOFTWARE CORPORATION</CompanyName>
<StreetAddress>2 MACARTHUR PL</StreetAddress>
<City>SANTA ANA</City>
<State>CA</State>
<PostalCode>927075924</PostalCode>
<Phone>7145408900</Phone>
<CountryCode>US</CountryCode>
<BranchIndicator>Headquarters</BranchIndicator>
<TradingName />
<ConfidenceCode>8</ConfidenceCode>
<MatchGrade>BAAAAZZ</MatchGrade>
<MatchNameGrade>Similar</MatchNameGrade>
<MatchNamePercent>62</MatchNamePercent>
<MatchStreetNumberGrade>Same</MatchStreetNumberGrade>
<MatchStreetNumberPercent>100</MatchStreetNumberPercent>
<MatchStreetNameGrade>Same</MatchStreetNameGrade>
<MatchStreetNamePercent>100</MatchStreetNamePercent>
<MatchCityGrade>Same</MatchCityGrade>
<MatchCityPercent>100</MatchCityPercent>
<MatchCountryStateGrade>Same</MatchCountryStateGrade>
<MatchCountryStatePercent>100</MatchCountryStatePercent>
<MatchPOBoxGrade>Not provided</MatchPOBoxGrade>
<MatchPOBoxPercent>-1</MatchPOBoxPercent>
<MatchPhoneGrade>Not provided</MatchPhoneGrade>
<MatchPhonePercent>-1</MatchPhonePercent>
</CandidateCompany>
<CandidateCompany>
<CompanyName>TYRA TECHNOLOGIES, INC</CompanyName>
<StreetAddress>2 MACARTHUR PL</StreetAddress>
<City>SANTA ANA</City>
<State>CA</State>
<PostalCode>927075924</PostalCode>
<Phone>7145408900</Phone>
<CountryCode>US</CountryCode>
<BranchIndicator>Headquarters</BranchIndicator>
<TradingName />
<ConfidenceCode>8</ConfidenceCode>
<MatchGrade>BAAAAZZ</MatchGrade>
<MatchNameGrade>Similar</MatchNameGrade>
<MatchNamePercent>62</MatchNamePercent>
<MatchStreetNumberGrade>Same</MatchStreetNumberGrade>
<MatchStreetNumberPercent>100</MatchStreetNumberPercent>
<MatchStreetNameGrade>Same</MatchStreetNameGrade>
<MatchStreetNamePercent>100</MatchStreetNamePercent>
<MatchCityGrade>Same</MatchCityGrade>
<MatchCityPercent>100</MatchCityPercent>
<MatchCountryStateGrade>Same</MatchCountryStateGrade>
<MatchCountryStatePercent>100</MatchCountryStatePercent>
<MatchPOBoxGrade>Not provided</MatchPOBoxGrade>
<MatchPOBoxPercent>-1</MatchPOBoxPercent>
<MatchPhoneGrade>Not provided</MatchPhoneGrade>
<MatchPhonePercent>-1</MatchPhonePercent>
</CandidateCompany>
</CandidateCompanies>
</ServiceResult>
</CompanySearchResult>
</CompanySearchResponse>
</soap:Body>
</soap:Envelope>
Here is my xpath defined in the report:
/CompanySearchResponse/CompanySearchResult/ServiceResult/CandidateCompanies
According to the WSDL file, the candidate companies are stored in an array. I am having problem to retrieve this values from the array. The web service ref is called but it returns nothing.
Anyone in the forum can tell me what I did wrong?
Thanks in advance!
Jeff

Hi, did you manage to figure this out? I'm having a similar problem with arrays.
Also, i'm looking at how I can pass an array of values as input to the webservice call.. eg if I were calling a stock ticker service that allows you to supply a list of tickers as input so that you can get all your responses in one call. Anyone any thoughts on that?
Cheers,
Paul.

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

How to create a billing request for service order that has serv contract?

Dear Experts,
Can you please help me?
The scenario is, my client has service contracts with their customer but they want to charge customers not periorically but as and when they provide service (ad-hoc).
So how to bill the customer in this case?
In my testing if I have a service contract (order type = SC) then when I create service order, system automatically picks up standard order type SM01. (which is service order with contract.)
And when I perform time confirmation and material consumption (goods issue), actual costs gets booked to the service order. However, using the service order number as referece, if I try to create a billing request in DP90, system create a blank billing request with no line items.
So, could you please advice, how can I create a billing request for a service order, if I have a contract?
Appreciate your help.
Best regards,
Abdul Rafey

Hi Praveen,
Thank you very much for your reply. I appreciate your time and efforts.
Ok, these are the steps how I have executed the process.
- I have created a service contract for an equipment. In the service contract, I have maintained the service material in the line item, maintained price and assigned equipment in the technical objects.
- I created service notification, which automatically picked up contract.
- When I create service order, from notification screen, system automatically picked up correct order type SM01 (Service order with contract).
- Then I planned operations and spare parts in the service order.
- Checked settlement rule in the service order is SDI.
- released and saved service order.
- Using IW42, in SAP ECC6, you can perform both time confirmation and material consumption using the same screen and also TECO service order. System issues message to say, goods issue have been posted.
- when you check the document flow of service order, you can see operations posted, and also goods issue posted.
- check cost tab to see actual costs. (if I want to settle costs from service order to service contract, I can do so w/o a problem in KO88)
- Use DP90, enter service order number and create billing request. System takes to billing request screen but it is blank. No line items.
- So, since there is a contract, in this case, am I meant to be creating the billing request from Service contract? instead of from Service order?
I hope I have clarified myself better this time.
Best regards,
Abdul Rafey

Can't figure out how to open a service request

I need to return a 7925 wireless set and can't figure out how to open a service request with the new support format.
Any suggestions?

I found the button that I was looking for and was able to open a service request

How does one request FiOS hardware to be installed?

I am writing because I am trying to figure out who I need to contact to get FiOS installed in our building. Currently, everyone else at our street intersection has service except for us.
Currently our only offerings are COX and Verizon VDSL, which is being marketed as "FiOS" but it is not fiber and the upload speeds are vastly inferior. (I need to upload 5-10 GB at a time, so VDSL and COX are not viable options).
My friends who live accross the street current have full FiOS service, and they get full 50/50 service, so my guess is there is hardware missing in our building that Verizon has yet to install. (Do not see an ONT in the apartment, and probably means hardware also needs to be installed in the comm room downstairs)
I already asked the leasing office and their management, and they said if Verizon wants to upgrade our building, please feel free, and they are willing to talk to Verizon reps and engineers regarding the matter.

MechE wrote:
Any practical reason why?
There are two reasons why VDSL was installed instead of fiber.
1) Your landlord did not give permission for fiber to be run to each unit.
2) VZ engineering surveyed the building and determined running fiber to each unit was not practical.
Although VZ is no longer installing VDSL, it is highly unlikely that VZ would replace the existing VDSL installation with fiber for the above reasons.

How to cancel a service request?

I had been running the Ipod in the car and noticed it had gone into the red. I turned it off and it went off normally. When I got home I hooked it to the computer to charge and it froze up completely, no response to anything, hold button, click wheel, weirdest yet, the backlight stayed on permanantly. And the computer did not recognize that it was even connected in Itunes or as a drive.
So I freaked out a bit and after an hour or so while( after trying what I could which was basically holding controls down and flipping the hold button off and on ) I gave up and put in a service request, and went to bed.
The next day, I noticed that the Ipod was dark ( which I expected since the battery was almost gone and the backlite was stuck on ). But just for fun I press the clickwheel on and lo and behold, it came back on as normal. I hooked it up to the computer as usual and it was visible to Itunes and the computer as it should have before. So I went through the reset process just in case and relaoded my music.
So I guess there should be a 6th "R" Let it sit over night and see if it still screwed up the next day
Now I'm stuck trying to figure out how to cancel a service after already receiving the return box Which was very fast by the way. Like, 2 days. Anyway, I looked all over the support site and could not find anything that looked like what I needed.
Does anyone have any idea what I need to do to cancel the service request?
Mike
Dell Dimension 8400 Windows XP Pro
Dell Dimension 8400 Windows XP Pro

Call apple...
Apple Phone Numbers
btabz

I updated to ios8 and tried to use Health Application. In Sources I get a message that other applications will show up on the list as they request permission to update your data. How does it happen? No apps are listed on my Sources section

I updated to ios8 and tried to use Health Application. In Sources I get a message that other applications will show up on the list as they request permission to update your data. How does it happen? No apps are listed on my Sources section

I have an answer to my question. There is a bug in IOS8 that prevents third party applications to talk to the Health Application. Apple is trying to fix it ASAP

Can anyone tell me how i get to speak to someone in customer service? they are retiring Forms Cental and i really need to speak to someone about the renewl of my subscription. THe live chat has been unavailable for two weeks and there is no other option t

Can anyone tell me how i get to speak to someone in customer service? they are retiring Forms Cental and i really need to speak to someone about the renewl of my subscription. THe live chat has been unavailable for two weeks and there is no other option to get in touch with these people. Any ideas anyone?

Hi SwarovskiUK,
I'm sorry to hear that you've been having trouble contacting Customer Care. Live Chat is certainly available--are you not seeing the chat option on the Contact Customer Care page? Or are just not able to get through?
In any case, I should be able to help you myself. What can I do for you?
Best,
Sara

How to create a Service request using Exchange connector in SCSM 2012

HI ,
I am able to create Incident request using exchange connector.Could you please let me know that how can i create Service request using Exchange connector 3.0.
Thanks in advance.

Hi,
Select a service request's template for new work items on the last wizard's page.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Graveyard:

How request the service URL automatically?

Hi, Everyone,
How can I let the 79** serials phone auto request the service URL without user press the 'Services' button?
(Except using 'IDLE & IDLE Timeout')
BTW, base on this idea, i'm try to using the push2phone application (ASP) which is in CiscoIPService SDK, but i'm failed;
Trace the codes, i'm found the problem is in the 'getDeviceList()', see the symbol("-->") marked:
function getDeviceList(callManager, userID, password, protocol)
// [callManager: *.*.*.*] [UserID: "pusher"] [password: "pusher"] [protocol: "https"]
var authstring = text2base64(userID + ":" + password);
var xmlhttp = new ActiveXObject("Msxml2.XMLHTTP.3.0");
var xmlDoc = new ActiveXObject("Msxml2.FreeThreadedDOMDocument.3.0");
xmlDoc.async = false;
xmlhttp.Open("GET", protocol + "://" + callManager + "/CCMAdmin/Reports/devicelistx.asp", false);
xmlhttp.setRequestHeader("Authorization", "Basic " + authstring);
xmlhttp.setRequestHeader("Connection", "close");
--> xmlhttp.Send(); // Error occured
--> xmlDoc.loadXML(xmlhttp.responseText);
--> Application("deviceList") = xmlDoc; // Application("deviceList") is NULL

Hi, Remy, Thank you for your reply:)
About my CCM:
CCM System version: 4.1(3)
CCM Administration version: 4.1(0.11)
You say:
"You have to know taht since CCM 4.1.3 the devicelistx is no longer supported.
The page is always present but no longer supported by cisco. "
Is that meaning i cannot call the function 'getDeviceList()' in this CCM version and subsequent?!
(Yes, i can access the devicelistx.asp by: "https://*.*.*.*/ccmadmin/Reports/devicelistx.asp")
On the other hand, I try to call the 'phonepush()' directly, it looks like:
<%@ Language=JavaScript %>
<%
function phonePush(phoneIP, URI, userID, password)
// URI: Spec service URL, such as: http://*.*.*.*/CIP/index.asp
var authstring = text2base64(userID + ":" + password);
var xmlhttp = new ActiveXObject("Msxml2.XMLHTTP");
var pushxml;
pushxml = "";
pushxml = "XML=" + Server.URLEncode(pushxml);
xmlhttp.Open("POST", "http://" + phoneIP + "/CGI/Execute", false);
xmlhttp.setRequestHeader("Authorization", "Basic " + authstring);
xmlhttp.setRequestHeader("Connection", "close");
xmlhttp.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
xmlhttp.Send(pushxml);
return xmlhttp.responseText;
phonePush(phoneIP, URI, userID, password); // calling
%>
But it has not succeeded:( Is that can works well?! Or is there has anyway that can perform the automation?
Thanks!!!

How forms requests are processed ?

Hi all,
Can someone post meatilnk iid's or other links to docs on "How forms requests are handled in oracle applications"
Thank you,
Prasad

Hi Prasad,
You can visit the following links.
http://erpschools.com/articles/forms-customization-steps-and-registration-process#13466743527622&92906::resize_frame|61-693
http://oracle.anilpassi.com/a-new-custom-form-in-oracle-apps.html
HTH
sanjay

I lost my phone last December 23 2014, and now apple emailed me that I am requesting for service. How can you block it?

I lost my phone last December 23 2014, and now apple emailed me that I am requesting for service. How can you block it?

Hi claire anne s.,
Thanks for the question. It may be best to contact your local law enforcement agency to report this:
Report a lost or stolen Apple product - Apple Support
https://support.apple.com/en-us/HT204315
- Matt M.

How to request FIOS service in my area?

Similar Messages

Maybe you are looking for