How to reset SquirrelMail Configuration?

Hi,
I was editing my SquirrelMail Configuration (sudo /etc/squirrelmail/config/config.pl) and I believe I put something in wrong and I am now getting errors in my webmail. Is there any way at all to reset the SquirrelMail Configuration? Thanks

Ah... er... Well I always do get my 'customers' in a pinch with my uber-scripts. I did not remember that there is a command on most every *nix out there called, you guessed it, yes. And if you were to type anything like 'yes please, all of it' it would say please FOREVER, or until you hit CTRL-C or closed the terminal session or rebooted the computer.
OK so scratch that command and on to the other trouble.
So we need to break this down and see what is going on. So from a terminal type the following
cd /etc/squirrelmail/config/
ls -al
when you type in the 2nd line above (the ls command) you should see AT LEAST 2 files and possibly more. you should see something like this:
drwxr-xr-x 8 root wheel 272 Oct 31 22:46 ./
drwxr-xr-x 4 root wheel 136 May 11 2005 ../
-rwxr-xr-x 1 root wheel 136705 Aug 22 09:29 conf.pl
-rw-r--r-- 1 root wheel 7375 Nov 30 11:11 config.php
-rw-r--r-- 1 root wheel 25373 Aug 22 09:29 config_default.php
-rw-r--r-- 1 root wheel 26025 Aug 22 09:29 configdefaultapple.php
-rw-r--r-- 1 root wheel 191 Mar 20 2005 config_local.php
-rw-r--r-- 1 root wheel 470 Mar 20 2005 index.php
without going through all of this, we need to delete the file called. config.php. We can accomplish this by etiher really deleting the file or renaming the file or moving it form the current folder. I attempted this by the command
sudo mv /etc/squirrelmail/config/config.php ~/.Trash/
this will move the file called config.php to the root trashcan. we could also do something like this (and this is the command I want you to try next)
sudo mv /etc/squirrelmail/config/config.php /etc/squirrelmail/config/config.php.bad
That is all one line. This gets rid of whatever configureation that squirrelmail has currently and renames it to dot bad.
The last command to run is
sudo cp /etc/squirrelmail/config/configdefaultapple.php /etc/squirrelmail/config/config.php
This puts a copy of the apple default setup back in place so you can run conf.pl.
Hope this makes it all a little better.
Peter
PowerMac G5 Dual 2.5Ghz Mac OS X (10.4.3) Mac OS X Server

Similar Messages

How to reset SM configuration

Hallo colleague! How can I reset Solution Manager configuration without fully reinstalling?
Thanks in advance!

A little bit late but, to reset SM configuration you have to delete Solution Manager system from LMDB.
Check SAP Note 2020955 (SOLMAN_SETUP has been reset and is in "grey" status)
Regards

ACE20 Context - how to reset context configuration?

Hi,
is there a way to reset/clear a particular context's configuration?
I see there is a 'wri erase' within a context, but no reload/reset - neither from the context itself nor from the Admin... puzzling...
I dont want to reload an entire blade just to clear one of the context's configs...
Thanks!

Hello,
Here, you have a document about checkpoint, you could check it out as reference as well:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA1_7_/configuration/administration/guide/upgrade.html#wp1012331
As per this cisco document:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/device_manager/guide/UGconfg.html#wp1002105, this is the procedure via GUI:
Deleting Virtual Contexts
Use this procedure to remove an existing virtual context.
Procedure
Step 1 Select Config > Virtual Contexts. The All Virtual Contexts table appears.
Step 2 Select the virtual context you want to remove, then click Delete. A window appears, asking you to confirm the deletion.
Step 3 Click:
•OK to delete the selected context. The device tree refreshes and the deleted context no longer appears.
•Cancel to exit this procedure and to retain the selected context.
Jorge

How can I reset a configuration profile password

Does anyone know how to reset a configuration profile password or remove a password protected configuration profile?
I have forgotten the password.
Thank-you

I do not see any option in the configuration profile to reset the password. Can you tell me where is this option?
What is profile manager? Where can I find it?
Thank you

Reset SMD-Configuration data for the solution

Hello!
I would like to know how to reset the configuration data for the solution in SMD wizard.
The solution has already the status "green" --> "This solution is ready for Diagnostics".
The problem is that I cannot change the settings for the server ("Setup parameters").
The instance number there (98) cannot be changed.
Further question:
how to install the introscope agent via SMD Wizard?
If I choose the solution and press "Setup Introscope Agent" I get the warning:
The landscape definition of the selected system is empty. Operation has been aborted
Furthermore I cannot see any parameters:
neigther for Server Node Details nor for Current VM Parameters. Here I get the warning:
There is no detail available for this server node. Check the Last Operation Result pane for more information.
Any helpful information wil be appreciated.
Thank you very much!
regards
Thom

Hi Thom,
To reset configuration there is possibility to remove Landscape Info using
Diagnostics Administration -> Diagnostics System -> Landscape management.
For your issue with Wily, you must have a solution correctly define. this setup will not work until you have it.
Frederic

How to password reset for configurator login

can anybody help me how to reset configurator login password.

What is issue here just logged in as configurator on idm admin page and search user configurator , edit it and change the password.

How to reset iTunes backup configuration for iPad and iPhone?

After buying a new Mac, I migrated my settings (because there were w a lot of apps) and generally everything's working. Except when I try to sync my iPad or iPhone, I get the following error:
iTunes could not backup the (device) ... because the backup was corrupt or not compatible with the iPad
A few notes
It does work with a new account, just not this one, so there's some setting somewhere that probably needs to go
I did repair disk permissions
I tried to reset preferences via mv *iTunes* to a backup folder in <user>/Library/Preferences
There are no backups on this machine (if you go to iTunes / Settings / Devices the "device backups" list is empty)
It still feels like something is pointing somewhere invalid, but I have no idea how to reset it.

The problem turned out to be a symlink to a folder that pointed nowhere where the backups were stored.
I seriously doubt many people are going to run into this issue, but hey, there you go, another thing to watch out for are symlinks if you transfer your settings to a new machine.
The reason before was that I was clearing out space on a SSD, and backups took up enough room.

Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

How to reset password on M175nw?

I'm trying to change the password for the WiFi (I recently changed my WiFi network's pass phrase). I need to change it through the Wireless Configuration from the Networking tab of the now LAN-connected Laser Jet Pro 100 M175nw. But it's asking for a password. For some reason, I forgot the password I used the first time I set it up.
Menu access is disabled in the printer, so I can't remove or reset web access from there.
How to reset the password? Or better yet, how to reset the printer so I can start over?
Thanks.

Hi AlphaTedHP,
I understand that you are locked from your computer device. Try the following steps to see if it helps: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=....
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
-Tyekey
I work for HP.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
-Tyekey
I work for HP.

Need Directions on how to reset everything for a WRT 54g !!!

I forgot password that I used in 2003 and followed computer's advice from tech support 800# on how to reset 54g. Now I'm looking for some dierection on how to change everything out of FACTORY default to my own info. From how to change domain name and password to setting up router for use with only a desktop and laptop. Basically everything dealing with the security of my system and the outside world. Not very computer smart but not a total idiot. Thanks Tyler D.

Hi, There are no settings on router, that are needed/can be done, for computers, printer to see each other. They will be automatically able to see each other, if you configure file and printer sharing on computers properly. And also the firewall settings on computer properly.

How to reset composite statitics from Enterprise Manager

Hi,
Someone knows how to reset statitics from a composite with their components, services and references from EM 11g without redeploy the composite?
Thank You in advance.
JP

John,
Yes your assumption is correct. Also, I have uninstalled (and removed user data) and re-installed DM. Also rebooted PC but still no luck. Eveytime I connect my new device to DM it pops up a msg: "Your messaging account is currently configured to use <old device>. Would you like to switch to <new device> instead?". I then proceed to click on "Yes", it still shows Active Device as the old one and Device Connected as new one.

HT1430 how to reset ipad if forgot password

How to reset ipad if i forgot my password

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to use SquirrelMail and Require SSL for IMAP Service?

Hello,
Mac OS X Server v.10.4.9 – Open Directory Master
Providing POP, IMAP, SMTP, web services including webmail via SquirrelMail.
PHP v.4.4.4 Nov. 1, 2006
OpenSSL v.0.9.7l Sept. 2006
I need to require SSL for IMAP access, however, I also need to provide webmail access. SquirrelMail does support TSL it seems and that can be configured from /etc/squirrelmail/config/conf.pl and is discussed briefly here: http://www.squirrelmail.org/wiki/SquirrelMailIMAPS .
When I turn on TSL on SquirrelMail and change the IMAP port number to 993 attempting to log into SquirrelMail provides the following error:
Bad request: IMAP server does not appear to support the authentication method selected. Please contact your system administrator.
According to the above noted page from the SquirrelMail site one needs PHP 4.3 and SSLv3 in order for TSL to work, one must also connect to the IMAP server over port 993. Requirements I appear to meet.
So – how can one require the use of SSL for IMAP and still provide webmail access via SquirrelMail?
I have reviewed these three threads:
http://discussions.apple.com/thread.jspa?threadID=912841&tstart=75
http://discussions.apple.com/thread.jspa?messageID=1457773&#1457773
http://discussions.apple.com/thread.jspa?messageID=3921004&#3921004
However they do not answer the fundamental question of how to use SquirrelMail with SSL required by IMAP. Essentially the conversation revolves around working around the SSL requirement or forgoing it.
Thank you for any assistance.

David,
Yet from time to time these same users are in a
circumstance where they need to use webmail, thus
SquirrelMail needs to work. I am not trying to
secure webmail by requiring SSL.
I see, your problem. In this particular case there is a workaround.
Use different ports for postfix and cyrus limited to localhost, thus catering only to SquirrelMail, thus not needing TLS.
Roughly do this (this is just off the top of my head, may contain errors):
For SMTP / Postfix:
Edit /etc/postfix/master.cf
and add:
465 inet n - n - - smtpd
-o smtpdrecipientrestrictions= permit_mynetworks,reject
-o mynetworks=127.0.0.1/32
-o smtpdenforcetls=no
# This will create a port 465 (if you use this alreay pick another one. choose the number wisely, depending ony what is in use on your server)
# This port is only accessible to IP number in "mynetworks"
For IMAP / Cyrus
Edit /etc/cyrus.conf and add (below imap):
imaplocal cmd="imapd -C /etc/imapd-local.conf" listen="127.0.0.1:imap" prefork=0
Next duplicate /etc/imapd.conf and name it imapd-local.conf
Edit /etc/imapd-local.conf
Change
tlsserveroptions: require
to
tlsserveroptions: use
Next edit:
/etc/services
and create a port called "imaplocal"
(you could probably recycle 585 wich is deprecated, check what is in the services file, make sure no duplicate port numbers).
should look something like:
imaplocal 585/udp
imaplocal 585/tcp
When done with all config files:
Save & restart mail services
Point SquirrelMail to the new ports wich should only be accessible to localhost (check with an external client if it holds
Sorry for the "draft style" post, but I don't have much time.
Just ask, if anything isn't clear.
HTH,
Alex

JustAnswer has asked me to answer your question -- "Apple TV: how to reset WiFi password. I do not recall the" -- because it falls within my area of expertise. I just need a few more details about your situation and I will get to work!

JustAnswer has asked me to answer your question -- "Apple TV: how to reset WiFi password. I do not recall the original PW am hitting a brickwall and I am ready to jump off! Please advise- many thanks

1)Your going to have to go to the manufacture's website for the orginal password. Once you have that you will have to setup you network again.
2)After your network is setup again you will go to general setting menu on the ATV. Select the Network option then Configure Wifi option. It will take a momment and load all the WIFI networks in you area. Once you selected your network, it will prompt you to enter the password.

How to reset the wiki server (MAC OS X 10.9 with OS X Server App Version 3) with all wiki datas only

Hi,
I need to reset my Wiki on MAC OS X 10.9 with OS X Server App Version 3, but without reinstalling the whole server app to configure all services.
Does anybody knows how to reset the wiki server (MAC OS X 10.9 with OS X Server App Version 3) with all wiki datas only.
Thanks a lot for your hints

Hi Linc,
sorry, I haven't saved the System-Logfile before restoring my parallels VM.
But it looks like issues of linking data.
For testing the Server services I have done a reset for a user password and I have deleted the profiles and configuration from Client-Side. One with Mac OS X 10.9.1, one iPad with iOS 6.1.3. But it was not possible to reconfigure/reinstall the Server Profile. Also a manually configuration was odd, because for some services the new password was necessary and for other services the old password. Very strange.
To bring back the services I have rolled back the last snapshot of my parallels VM. Afterwards there was no probleme to reconfigure/reinstall the Profile on Client-Side (OS X 10.9.1 and iOS 6.1.3). Also the manually configuration shows the password for all services are matching with the current configuration.
I'm going to install a further parallels VM with Mac OS X 10.9.1 and Server App 3 from scratch to move the services.
Greetings

How to reset SquirrelMail Configuration?

Similar Messages

Maybe you are looking for