ACE20 Context - how to reset context configuration?

Hi,
is there a way to reset/clear a particular context's configuration?
I see there is a 'wri erase' within a context, but no reload/reset - neither from the context itself nor from the Admin... puzzling...
I dont want to reload an entire blade just to clear one of the context's configs...
Thanks!

Hello,
Here, you have a document about checkpoint, you could check it out as reference as well:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA1_7_/configuration/administration/guide/upgrade.html#wp1012331
As per this cisco document:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/device_manager/guide/UGconfg.html#wp1002105, this is the procedure via GUI:
Deleting Virtual Contexts
Use this procedure to remove an existing virtual context.
Procedure
Step 1 Select Config > Virtual Contexts. The All Virtual Contexts table appears.
Step 2 Select the virtual context you want to remove, then click Delete. A window appears, asking you to confirm the deletion.
Step 3 Click:
•OK to delete the selected context. The device tree refreshes and the deleted context no longer appears.
•Cancel to exit this procedure and to retain the selected context.
Jorge

Similar Messages

  • How to reset SM configuration

    Hallo colleague!  How can I reset Solution Manager configuration without fully reinstalling?
    Thanks in advance!

    A little bit late but, to reset SM configuration you have to delete Solution Manager system from LMDB.
    Check SAP Note 2020955 (SOLMAN_SETUP has been reset and is in "grey" status)
    Regards

  • How to reset SquirrelMail Configuration?

    Hi,
    I was editing my SquirrelMail Configuration (sudo /etc/squirrelmail/config/config.pl) and I believe I put something in wrong and I am now getting errors in my webmail. Is there any way at all to reset the SquirrelMail Configuration? Thanks

    Ah... er... Well I always do get my 'customers' in a pinch with my uber-scripts. I did not remember that there is a command on most every *nix out there called, you guessed it, yes. And if you were to type anything like 'yes please, all of it' it would say please FOREVER, or until you hit CTRL-C or closed the terminal session or rebooted the computer.
    OK so scratch that command and on to the other trouble.
    So we need to break this down and see what is going on. So from a terminal type the following
    cd /etc/squirrelmail/config/
    ls -al
    when you type in the 2nd line above (the ls command) you should see AT LEAST 2 files and possibly more. you should see something like this:
    drwxr-xr-x 8 root wheel 272 Oct 31 22:46 ./
    drwxr-xr-x 4 root wheel 136 May 11 2005 ../
    -rwxr-xr-x 1 root wheel 136705 Aug 22 09:29 conf.pl
    -rw-r--r-- 1 root wheel 7375 Nov 30 11:11 config.php
    -rw-r--r-- 1 root wheel 25373 Aug 22 09:29 config_default.php
    -rw-r--r-- 1 root wheel 26025 Aug 22 09:29 configdefaultapple.php
    -rw-r--r-- 1 root wheel 191 Mar 20 2005 config_local.php
    -rw-r--r-- 1 root wheel 470 Mar 20 2005 index.php
    without going through all of this, we need to delete the file called. config.php. We can accomplish this by etiher really deleting the file or renaming the file or moving it form the current folder. I attempted this by the command
    sudo mv /etc/squirrelmail/config/config.php ~/.Trash/
    this will move the file called config.php to the root trashcan. we could also do something like this (and this is the command I want you to try next)
    sudo mv /etc/squirrelmail/config/config.php /etc/squirrelmail/config/config.php.bad
    That is all one line. This gets rid of whatever configureation that squirrelmail has currently and renames it to dot bad.
    The last command to run is
    sudo cp /etc/squirrelmail/config/configdefaultapple.php /etc/squirrelmail/config/config.php
    This puts a copy of the apple default setup back in place so you can run conf.pl.
    Hope this makes it all a little better.
    Peter
    PowerMac G5 Dual 2.5Ghz   Mac OS X (10.4.3)   Mac OS X Server

  • How can I reset a configuration profile password

    Does anyone know how to reset a configuration profile password or remove a password protected configuration profile?
    I have forgotten the password.
    Thank-you

    I do not see any option in the configuration profile to reset the password. Can you tell me where is this option?
    What is profile manager? Where can I find it?
    Thank you

  • Reset  SMD-Configuration data for the solution

    Hello!
    I would like to know how to reset the configuration data for the solution in SMD wizard.
    The solution has already the status "green" --> "This solution is ready for Diagnostics".
    The problem is that I cannot change the settings for the server ("Setup parameters").
    The instance number there (98) cannot be changed.
    Further question:
    how to install the introscope agent via SMD Wizard?
    If I choose the solution and press "Setup Introscope Agent" I get the warning:
    The landscape definition of the selected system is empty. Operation has been aborted
    Furthermore I cannot see any parameters:
    neigther for Server Node Details nor for Current VM Parameters. Here I get the warning:
    There is no detail available for this server node. Check the Last Operation Result pane for more information.
    Any helpful information wil be appreciated.
    Thank you very much!
    regards
    Thom

    Hi Thom,
    To reset configuration there is possibility to remove Landscape Info using
    Diagnostics Administration -> Diagnostics System -> Landscape management.
    For your issue with Wily, you must have a solution correctly define. this setup will not work until you have it.
    Frederic

  • How to write context.lookup("jndi name ") and its syntex

    hi
    i m a new one and doing this jms type program for the first time. i copy a source code and paste but at the compilation time there is no error.
    at the run time i get the exception as
    Naming Exceptionjavax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
    can anyone help me how to write the code of below statement as i m getting the wrong jndi name
    QueueConnectionFactory queueConnectionFactory =
    (QueueConnectionFactory) context.lookup("QueueConnectionFactory");
    and its configuration style in ejb-jar and jboss.jar.
    getting a reply soon may be my good luck.

    Have a look at:
    http://wiki.jboss.org/wiki/Wiki.jsp?page=Getquotjavax.naming.NoInitialContextExceptionquot

  • How To Remap Contexts in Dynamically..

    Dear Experts,
    in My scenario, I have one View,  this view using for both Create and Chance Options, But I map only Same Context of  ctxInputCreate.
    But When i Using this View on Chance mode CtxtinputCreate Context to Map to CtxinputChange.
    ctxtInputChange, CtxtInputCreate are same elements and same cordiality all same..
    I don't what i fallow method write or not.
    for Change and Create view i am using only one context which is mapped to Create Model.  When I changing time Just I Copy this context to Change Model Context. So its Working Fine. But Problem is one User Working in Two Windows on browser one Window working on Create and one Window working Change then its Conflict. so How To Avoid this Conflict.
    Please Anyone Suggestion Designee time Context Mapping to Change Dynamically.
    Sincerely

    Friends its Stupid quetion.. Sorry.. leave this thread.
    Regards

  • How to use "Context Menu" web item in WAD 7.0 ?

    Hi Experts,
    Kindly tell me How to use "Context Menu" Web item in SAP WAD 7.0 ?
    How to attach this Web item to my Graph/Chart ?
    Plz provide some documents on this.
    Full points will be given.
    Thanks.
    -Jay Jay
    Edited by: jayaprakash j on Oct 10, 2008 1:47 PM

    Hi Jay
    Web items and HTML elements (for example, tables, texts, and images) that you insert into a Web template, as well as the Web template itself, have a context menu. This context menu has context-sensitive menu entries that you can use to call various Web Application Designer functions. You can, for example, use the context menu to save a Web item (for which you have specified properties by using the parameters) as a reusable Web item, call the properties dialog box for this Web item, copy the Web item and paste it into another Web template, or delete the Web item from the Web template.
    for more info go to following link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/2f/776b3d32390968e10000000a114084/frameset.htm
    Regards
    Vivek

  • How to make context menu in Windows 10 application?

    How to make context menu like this? With touch friendly and DPI per monitor awareness. Also considered WPF variant.

    Hybrid app? Do you mean Universal app?  Please explain what you're trying to make.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • How to pass context based parameters to subquery?

    Hello to All!
    How to pass context based parameters to subquery of custom folder when I schedule workbook?
    Thanks, Oleg

    Hi Russ
    Yes, I've done this too. Basic SQL though will not allow the updating of a table inside a function, so we have to get clever. The trick is to use the PRAGMA AUTONOMOUS TRANSACTION command. Here's an example:
    FUNCTION UPDATE_MYTABLE(P_VALUE IN NUMBER)
    RETURN VARCHAR2 IS
    PRAGMA AUTONOMOUS_TRANSACTION;
    BEGIN
    UPDATE SCHEMA_OWNER.MY_TABLE SET MY_VALUE = P_VALUE;
    COMMIT;
    RETURN('Done');
    END UPDATE_TABLE;
    When the update has been completed the Discoverer worksheet will respond with 'Done'.
    Everyone: don't forget to grant EXECUTE on this function to all of the necessary users, including the EUL owner, and also don't forget to import the function using the Admin edition so that it is available for the users. You will also need to make sure that all necessary users have been granted the UPDATE privilege on the table.
    I hope this helps
    Regards
    Michael

  • How to setup context sensitive parameters

    Does anyone know how to setup context sensitive parameters? I am in 9.2 with Application 11.5.8. The requirement is if the user is entering one of the two parameters, the other one will be disabled. Thanks in advance.

    No, this is an Oracle (Internet) Application Server forum. You question seems to be about database and e-business suite.
    Regards,
    Mathias

  • How to share context to external browser

    Dear friends,
    Anyone help how to share context to external browser..
    I Have two Views View1, view2 , same component and same application.
    in view1, I am clicking button then display view2 on external window (external browser) ( CreateExternalwindow) through URL,
    so my problame is I want share context of View1 to View2,
    I am unable to the context sharing to view2
    please help me

    Respected Satya ji,
    how i tell my wishes to you, really you are save me, i am fighting about this solution last five days. Really thank you,
    Basically i am not java guy, so now I know how to Write custom class also.
    thank you.. ...........
    please give me mail and phone number to this id. I need to tell my wishes
    [email protected]
    I reward all points to you...

  • ALV: how to save context space for large tables ?

    Dear collegues,
    We are displaying an ALV table that is quite large. Therefore, the corrsponding DDIC structure and the WD context is large. This has an impact on performance and the load size of the program. Now we will enhance the ALV table again.
    Example: for an icon and its explaining tooltip that are displayed in the ALV: there is are context fields required like "SOURCE_FIELDNAME" for the tooltip as well as for for the icon. They need a lot of characters for each tooltip and icon).
    Question: do you have an idea, how to save context space for those ALV fields ?
    Best regards,
    Christian

    >We are displaying an ALV table that is quite large.
    Do you mean quite large as in a large number of columns or as in a large number of rows (or both)?  I assume that the problem is probably more related to a large number of rows.  For very large tables, you should consider using the table instead of the ALV. For very large tables you can even use a technique called context paging to keep only a subset of the data in the context memory at a time.  Here is a recent blog that I created on the topic with demonstrations of different techniques for table sharing, shared memory, and context paging when dealing with large tables in Web Dynpro ABAP:
    Web Dynpro ABAP: How Fast Can You Consume 1 Million Rows?

  • How to password reset for configurator login

    can anybody help me how to reset configurator login password.

    What is issue here just logged in as configurator on idm admin page and search user configurator , edit it and change the password.

  • How to reset iTunes backup configuration for iPad and iPhone?

    After buying a new Mac, I migrated my settings (because there were w a lot of apps) and generally everything's working. Except when I try to sync my iPad or iPhone, I get the following error:
    iTunes could not backup the (device) ... because the backup was corrupt or not compatible with the iPad
    A few notes
    It does work with a new account, just not this one, so there's some setting somewhere that probably needs to go
    I did repair disk permissions
    I tried to reset preferences via mv *iTunes* to a backup folder in <user>/Library/Preferences
    There are no backups on this machine (if you go to iTunes / Settings / Devices the "device backups" list is empty)
    It still feels like something is pointing somewhere invalid, but I have no idea how to reset it.

    The problem turned out to be a symlink to a folder that pointed nowhere where the backups were stored.
    I seriously doubt many people are going to run into this issue, but hey, there you go, another thing to watch out for are symlinks if you transfer your settings to a new machine.
    The reason before was that I was clearing out space on a SSD, and backups took up enough room.

Maybe you are looking for