How to resolve booting issues after kernel panic?
After a kernal panic occurred, whenever I restart my computer the light flashes and it emits one loud harsh beep. I have to force it off and turn it on again to get it to boot, everything else works normally. Any help would be greatly appreciated!
This screen appeared, which apparently indicates a kernel panic.
The issues are similar to these two threads:
https://discussions.apple.com/thread/1935615?threadID=1935615
https://discussions.apple.com/message/4776709#4776709
Interval Since Last Panic Report: 1779896 sec
Panics Since Last Report: 1
Anonymous UUID: 9AFA25D5-E2C1-4E87-89DF-1D76F6CD8A20
Sun Jun 19 13:22:02 2011
panic(cpu 1 caller 0x42259a): "hfs_swap_HFSPlusBTInternalNode: attr key #4095 offset too big (0x0000)\n"@/SourceCache/xnu/xnu-1504.9.37/bsd/hfs/hfs_endian.c:735
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x46503b38 : 0x21b510 (0x5d9514 0x46503b6c 0x223978 0x0)
0x46503b88 : 0x42259a (0x5c380c 0xfff 0x0 0x6e)
0x46503c28 : 0x417561 (0x46503c48 0x5884ce8 0x1 0x1)
0x46503c68 : 0x2cc70d (0x2d99e520 0x587d004 0x58004bc 0x12445ad)
0x46503cb8 : 0x1247c40 (0x2d99e520 0x0 0x0 0x2000)
0x46503ce8 : 0x123eb6b (0x5d5c0d4 0x0 0x2000 0x0)
0x46503d58 : 0x1247c40 (0x584ea00 0x5d5c0c0 0x0 0x2000)
0x46503d88 : 0x159704f (0x46503dc4 0x0 0x2000 0x0)
0x46503de8 : 0x159926a (0x582b200 0x561d290 0x82a000 0x0)
0x46503e08 : 0x11a467e (0x5836200 0x5792780 0x0 0x2be9604c)
0x46503e38 : 0x11a5270 (0x5826b00 0x5792780 0xc0ae720c 0x578aa00)
0x46503e58 : 0x11ad05c (0x5792780 0x5792780 0x0 0x2a358d)
0x46503e98 : 0x11ad1b6 (0x578aa00 0x5792780 0x0 0x0)
0x46503ed8 : 0x11aecc0 (0x578aa00 0x80000 0x106ea8 0x573c7a8)
0x46503f38 : 0x11ab130 (0x578aa00 0x82a000 0x1 0x3)
0x46503f58 : 0x55028c (0x578b940 0x7478000 0x46503fa8 0x21915d)
0x46503f88 : 0x5506e6 (0x578bac0 0x7478000 0xffe007c5 0xffffffff)
0x46503fc8 : 0x2a06dc (0x578bac0 0x0 0x10 0x7473a84)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOAHCIBlockStorage(1.6.3)@0x1594000->0x15a6fff
dependency: com.apple.iokit.IOAHCIFamily(2.0.4)@0x11a2000
dependency: com.apple.iokit.IOStorageFamily(1.6.2)@0x1236000
com.apple.driver.AppleAHCIPort(2.1.5)@0x11a8000->0x11bbfff
dependency: com.apple.iokit.IOAHCIFamily(2.0.4)@0x11a2000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x908000
com.apple.iokit.IOAHCIFamily(2.0.4)@0x11a2000->0x11a7fff
com.apple.iokit.IOStorageFamily(1.6.2)@0x1236000->0x124dfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBook5,2 (Mac-F22788AA)
System uptime in nanoseconds: 475669227090
unloaded kexts:
com.apple.driver.AirPortBrcm43xx 423.91.27 (addr 0xf83000, size 0x1900544) - last unloaded 96256802454
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 34597603457
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleBacklight 170.0.34
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AudioAUUC 1.54
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.5.0d5
com.apple.GeForce 6.2.6
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleIntelPenrynProfile 27
com.apple.driver.AppleUSBTrackpad 200.3.2
com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.nvenet 2.0.15
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 427.36.9
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleUSBOHCI 4.1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 67
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.nvidia.nv50hal 6.2.6
com.apple.driver.AppleProfileTimestampAction 67
com.apple.driver.AppleProfileThreadInfoAction 67
com.apple.driver.AppleProfileRegisterStateAction 67
com.apple.driver.AppleProfileKEventAction 67
com.apple.driver.AppleProfileCallstackAction 69
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.NVDAResman 6.2.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.AppleProfileFamily 61
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.driver.NVSMU 2.2.7
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 314.1.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: MacBook5,2, BootROM MB52.0088.B06, 2 processors, Intel Core 2 Duo, 2.13 GHz, 2 GB, SMC 1.38f5
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: MATSHITADVD-R UJ867A
USB Device: eGo USB, 0x059b (Iomega Corporation), 0x047a, 0x26200000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0229, 0x04600000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
Similar Messages
-
Issue after kernel panic from update! Please help
Is anyone having issues with their computer after doing the reinstall? I too had the same problem yesterday as thousands of other people had. Took me 9 hours to reinstall lion. I was very happy when I realized I didn't lose all my data. (Guess I learned my lesson on backups) My problem is: Today after my computer is working again is is so stinking slow..... Im talking it has been 15 minutes to load the new mac commercial (30 second ad, on apple.com) In that 15 minutes it has only loaded 20 seconds of it. It is still trying to load the rest so I can stream it? I have never had an issue with speed. It is taking me nearly 4-5 minutes for every email I click just to pull up and read it. Something is wrong? I know it isn't my internet, we have 3 other computers in the house that work the way they always have. My laptop has always been the fastest of them all. I need help! Anyone have any suggestions? Is is possible if the update damaged the flash drive or something? All I know after 9 hours computer loss yesterday and my computer taking all day today to answer a few lousy emails is killing me, I need a solution. I have tried cleared the cache and reset safari with no luck.
Please advise...HI Chris,
Kernel panics are sometimes causes by hardware issues. Probably a good idea at this point to check the boot disk for errors.
Open Disk Utility, in the Utilities folder in the Applications folder.
Select your disk, and click First Aid.
Click Verify Disk.
If the disk needs repairs, do one of the following:
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Repair Disk.
Checking a hard disk to see if it’s going to fail
You can check the health of your hard disk by checking its Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) status in Disk Utility. Most disk drives include S.M.A.R.T. hardware. Developed by IBM, S.M.A.R.T. hardware allows hard disks to test themselves for potential problems.
Starting up in “safe mode” may help you to diagnose problems you’re having with your computer.
To start up in safe mode:
Shut down your computer and wait 10 seconds.
Press the power button.
Immediately after you hear the startup tone, hold down the Shift key.
You should press the Shift key as soon as possible after your hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator (spinning gear).
To leave safe mode, restart the computer normally without holding down any keys during startup.
More help here resolving kernel panics; http://www.thexlab.com/faqs/kernelpanics.html
If the boot disk appears to be ok, you could try installing the 10.5.6 combo update available here;
http://support.apple.com/downloads/MacOS_X_10-5-6_ComboUpdate
About the Mac OS 10.5.6 update
Carolyn -
Premiere Elements 9 - how to resolve license issue after uninstall - reinstall?
Hi
I am trying to help out my dad who had Premiere Elements 9 installed on his PC. Due to malfunction of the PC a total reinstallwas performed.
PE9 was uninstalled but now he tries to reinstall and the license does not work anymore because it is considered already in use.
From the troubleshooting pages here I understand he would have had to deactivate his license but obviously he did not. How can he get his license reacivated again?
thxcontact adobe support and request an activation count reset.
contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html -
I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?
Please also see Boot Camp: Set the default operating system.
-
My ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??
my ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??
The first thing that I would try is a reset.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
IF that doesn't stop the rebooting, you should restore the iOS Software. Read this carefully and read to all the way through before proceeding.
Use iTunes to restore your iOS device to factory settings
At the very end of the article under "additional information" there is a link to recovery mode. You might need to use that if you cannot restore in the conventional manner. -
After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.
Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
Boot issue after shutdown plus power - no problem after restart or after removing power cord
Hello,
I have a Pavilion Elite m9275.nl desktop. I experience boot issues after a regular shut down.
After a regular shut down and pressing the power button within a few seconds/minutes, it keeps hanging in the HP startup / BIOS screen, Windows 8 won't boot, the hard drive light doesn't flash;
After a restart from Windows (instead of shut down) it boots correctly from the c-drive. No hard-drive problems at all;
After a shut down and removing the power cord for 10-15 minutes, it boots correctly from the c-drive. No hard-drive problems at all.
When the PC does not boot, F10 (to enter BIOS settings) does not work neither, so it seems to be a hardware or BIOS issue.
I already replaced the CMOS battery and already loaded default BIOS settings.
During a succesful boot or after pressing F10 (to enter BIOS settings) the screen shows some disk information right after the BIOS. This is the screen that says something like "press CTRL-I to start configuration utility". During a succesful boot the hard disk light flashes shortly before displaying that screen. During an unsuccesful boot the hard disk doesn't flash.
Before replacing a hardware component, I need to know what to replace...
Could it be the hard disk controller or hard disk is defect?
Where is the hard disk controller stored?
Can I upgrade the firmware of the hard disk controller?
BUT: why does it work when I remove the power cord for 15 minutes or after a restart (instead of a shutdown and than pressing power)?
Many thanks in advance,
Sjoerd-Jaap Westrasjwestra
I apologize for the delay in responding to your post. First I am glad you were able to resolve your initial issue and to help I have included a link to a document 'Bios Setup Utility Information and Menu Options' that will provide you with instructions on how to enter the Bios and provides additional information on navigating it as well.
http://goo.gl/HIclUV
If you need any further information please re-post.
Thank you for your post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Repeated iMac Problems, Display Issues now Kernel Panics
I’m lost on what’s wrong with my 2008 iMac and I think I just have to bring it back into Apple for a third time to have it repaired. But something is obviously not working that is causing these issues.
About a month ago, my computer began showing heavy pixilation, flickering images and the on-screen graphics. The computer appeared to keep working in the background from what I could tell so I came to conclusion that it must be the graphics card that’s failing and I’ll need to have it looked at.
My 2008 iMac was custom-built by Apple with the Nvidia GeForce 8800GS that was offered as an upgrade option. There have been several posts on the display and graphics discussion board about that graphics card along with other postings other places about the problems the Nvidia GeForce 8-series had.
The display problems I mention above would not happen immediately, it would happen as the computer warmed up and was used for 3-5 minutes.
Anyway I brought my computer into Apple explained to them what I believed was the problem and the Apple Store technician agreed with me. Because I did not purchase AppleCare, it cost me $400 and a week without my iMac to have that card replaced.
I got the computer back two weeks ago and everything seemed fine. It was working as it always had. I even was running SMC Fan Control in order to keep the computer as cool as I could (the Nvidia problem was related to overheating).
But this morning, this is what I woke up to:
http://img97.imageshack.us/img97/7436/photoijr.jpg
The computer now has a semi-permanent pixilation when it starts up (as suppose to the pixilation 3-5 minutes into use). But more worrisome now is I cannot start up the computer without it going into a kernel panic. I tried resetting the PRAM, I tried starting in safe mode. The only thing I haven’t tried yet is booting from an external HD which I will try this evening (to hopefully isolate it if it’s hardware or a software problem).
The Apple Hardware Test has been unhelpful. When it originally failed three weeks ago, the test showed nothing and this morning when I ran it (permanent pixilation and all), it showed nothing. I feel like if it was a software issue the pixilation would have disappeared during the hardware test because that’s not an OS-X based program.
Here are my specs on this computer:
2008 iMac 24" 2.8ghz Intel Core Duo, 4 gigs of RAM (Crucial Purchased, I have original sticks somewhere), 1 TB HD, Nvidia GeForce 8800GS.Hi, just to update you, I came home today and did a few things that didn't seem to solve my Mac's problems:
- I booted up from my firewire "safe" drive that I keep a copy os x on to see if I had a corrupted hard drive or something. It booted into the kernel panic I described above.
- I also swapped out the crucial RAM for Apple's factory RAM. It also booted into the Kernel Panic.
In both incidents, the display issues didn't go away. Now instead of pixelization i have vertical bars running in a pattern across my screen.
I'm currently trying to boot onto the OS X CD at this point to see if I could do a reinstall. It's taking quite awhile to boot into that.
With that in mind, I think we're still having graphics card issues or more seriously some logic board problem. -
Error in ST05 - trace record pair error block. How to resolve/tackle issue?
Hello,
Someone approached me last week in asking me how to resolve an issue in ST05. Basically I used the transaction to filter "inclusive VBPA".
The error is ....
Internal error - trace record pair error block 8 link no. 0
Message no. 0S 026
Diagnosis
Each SQL statement is described by two SQL trace records that have the
same link number. In this case, there are at least three records with the
same link number.
The system outputs the number of the block in which the third SQL trace
record was found, as well as the link number of the records.
System response
Program processing continues after the message is displayed. The system
processes all of the trace records. You should assume, however, that the
SQL trace in this case is not displayed correctly.
Procedure
You cannot correct this error yourself. If you can reproduce the error,
contact the SAP Hotline.
SQL trace list editing terminated after 6 errors
While using the trace I am executing the program that selects VBPA once and, I am assuming, as it goes through the BAPI BAPI_SALESORDER_CHANGE used to unblock a delivery block. I am guessing the problem or source is from the BAPI but do you guys have other insights in what is causing this issue?
Thanks again, hope to hear from you soon, and good day.Our ERP LIVE Production around 11am all users encountered cannot generate print record from the submit new request. see below errorFor production issues, please log a SR.
ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.
ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.
ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.Please see these docs.
OERR: ORA 60 "deadlock detected while waiting for resource" [ID 18251.1]
What to do with "ORA-60 Deadlock Detected" Errors [ID 62365.1]
Thanks,
Hussein -
I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?
Same for me with Iphone 5 and IOS 7 on mac pro. Install ITunes 11.1 and after reboot nothing work. Work only with Mac Pro in safe mode.
I have uninstalled Wi-fi-sync1.0 app from MacPro and Itunes sync well with iphone. -
How do you find out about Kernel panics?
Can anyone please explain to me how does one find out about Kernel panics, where to look etc? Thanks and regards
When the operating system kernel, one of the most basic, foundational levels of the Mac OS X operating sytem, detects some kind of exceptional condition or internal corruption or when the hardware sends it a signal of some grave error, which can be a bug in the system software or a driver or can be a hardware problem and the situation is not one that can be dealt with and continuing operation is impossible, then the kernel "panics." It does it's best to shut down gracefully, but it's an abortive termination of all system activity, after which a reboot usually takes place (though you're notified and must intervene before that happens).
It is a serious error and should not occur, but computer technology, both hardware and software, being what they are, there's no way to absolutely guarantee they won't happen. Unix-based systems such as Mac OS X have pretty good reliability, especially since Apple controls both the hardware and software. Still, 3rd-party software can be incorporated into a system, and Apple does not control or certify that code, so there's ample opportunity for poorly written add-ons (especially hardware drivers) to cause problems.
Randall Schulz -
I have given box / borders for cells in the table in smartforms. in main window.
Now when i print with HPlaser the output comes fine.
But when i use Epson - The borders almost print 5 to 6 times bigger & looks to ugly and even the data is not shown. Meaning the data is overshadowed by the borders of the Cells.
Tried to reduce the <b>width</b> in the BOX option of TABLE in smartforms. By default it is 15.00 TW. did not work.
EPSON is what they want to use.
Please let me know how to resolve this issue.
Regards,
SivaHi Siva,
Ask them to provide the Diamension of what paper type they
are using for EPSON, becoz U might have kept paper size
as A4 and there they might be using INCH12 or some other size
of paper( not Sure ).So if u can have the Exact paper format that
they are going to use , u can design ur form in that paper format
and then check.
Regards
Avi..... -
I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?
Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H. -
I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice? My email account is through Optimum online and I am using Airpost Express.
P.S. The error sound "bong" is driving us nuts!Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.
Maybe you are looking for
-
My iPhone 4s does not sync to iTunes 10.6.3.25
I have an iPhone 4s iOS 5.1.1 and since I upgraded iTunes to 10.6.3.25 it goes through the sync process with no error messages, but does not sync playlists. Diagnostics says that sync is working fine. Tried reboot on iPhone. Reinstalled iTunes on PC.
-
I want to install WIN XP PRO on Satellite U300-111
Dear all anyone have any idea how i get Serial ATA RAID controller driver for toshiba Satellite U300-111 to install windows xp pro becouse it show me messege when i press enter for installation it said: Windows XP Professional Setup Setup did not fin
-
Validation on PLant and profit center for Material
Hi gurus please advise on validation. On FB50 transaction, Our users want a validation for particular accts say (GL: No 999888) that if a material is entered in FB50, a plant and profit center must also be entered AND the entered plant and profit c
-
Flex 4: Custom ScrollBar not working in Custom DropDownList
Hello, I'm having an odd issue that I just cannot figure out. I have a custom DropDownList .as component (to pass color values) and a custom skin. In this skin I am using a custom Scroller (same AS file component with mxml skin). When I use this conf
-
Ipad2 crashing after ios7 update?
Hi, I Updated my ipad2 this morning and it immediatly crashed and i had to connect it to itunes on my macbook to get it back on again where i had to restore to factory settings. I had to reinstal IOS7 and now its installed it only lets me use the ipa