How to resolve Invalid Color Space error with IE ?

We are in the progress of upgrading to Acrobat 9.3.4. We have approximately 1400 fillable PDF templates in our repository, and are getting an error displaying 10 of these forms after upgrading to Acrobat 9.3.4. The error is: 
"There was an error processing a page. Invalid ColorSpace." All the forms were created with Adobe InDesign, then embellished with fillable form fields using Acrobat 7. From reading other posts, this seems to point to a corrupt PDF, but we do not believe this to be the case and we believe this is a bug in Acrobat 9. Here is what we've witnessed to back up this conclusion...
1.) The problem only occurs when displaying the PDF from within an Internet Explorer browser window (both IE6 & IE8). It does not occur if we simply open the PDF from the file system within Acrobat.
2.) The problem is random and not consistent. We usually get the error, but sometimes it opens fine.
3.) When the problem occurs, we're able to view the PDF by right clicking on the PDF and toggling the "Resolution" settings in the Page Display Preferences (either toggle from 96 to custom, or change the custom number). However, this is not an acceptable long-term workaround for our end users.
4.) We've tried recreating the PDF by opening it up in Acrobat 9 and doing a "save as...". The problem still occurs with the resulting PDF (we have not yet tried altering any other Acrobat options).
5.) The problem does not occur when opened in the browser with earlier versions of Acrobat (7.x for example).
Please provide any update you may have on this issue.

If you create a new application and try to create a new JSF page there are you still getting this error?
If you do then I think something in your installation went wrong - the first step would then be to delete the system directory at: C:\Documents and Settings\youruser\Application Data\JDeveloper and restart JDeveloper.

Similar Messages

  • Invalid Color Space error after update Reader to 9.3.3

    After updating Adobe Reader to 9.3.3 I run into the Invalid Color Space error when trying to open a PDF file created with CorelDraw 12 in the format PDF/X-1A.  This format needed by a printing office to print the file. The strange thing is that Reader opens older PDF files exported from CorelDraw in thsi format normally without the error message.
    It happens only with PDF exports made after the Reader update. CorelDraw settings are as previously used.
    Exports in other formats, other than  PDF/x-1, X-1A and X-3 open normally.  How to solve this??

    any suggestions?

  • Why Invalid Color Space Error?

    Hi Everyone,
    I am receiving numerous "invalid color space" errors when viewing PDF files in Acrobat Reader (v 11.0.10) on Windows 8, but have not received similar messages when using Acrobat Reader (v 11.0.10) on Mac OSX 10.9.5.  I will outline our environment and workflow below.
    The PDF file is created via the export of an InDesign CC 2014 document.  No errors show up on the preflight panel, and no warnings show up upon export.  The file can be opened fine in the Mac environment with both Acrobat Pro 11.0.10 and Acrobat Reader 11.0.10.  I can navigate through pages, print, and add comments in both applications.
    When this same file is opened on Windows 8 it initially loads, navigates pages, and will allow a few comments to be inserted before showing an "invalid color space" error.  If the error occurs during commenting, the comment will disappear, and I am no longer able to scroll through any other pages since the error reappears.
    I would think that if it was file corruption the problems would be on both Mac and Windows.  Any suggestions would be extremely helpful as all of my searches point to a non-Adobe product (as either the document source or PDF generator) as the culprit with this error.
    Thank you!

    Hi Racheal ,
    Please refer to the following link to see the actual cause for "invalid color space" error and the possible solutions to deal with it.
    http://blogs.adobe.com/dmcmahon/2011/05/17/acrobatreader-invalid-colorspace-error-opening- a-pdf/
    Regards
    Sukrit Dhingra

  • How to resolve Invalid Classpath Entry error in Oracle Jdeveloper 11g

    I receive the following error in JDeveloper when I try to create a new JSF page in ViewController project -
    Dec 27, 2009 9:47:11 PM oracle.adfdt.library.loader.ProjectLibraryManager
    SEVERE: Invalid Classpath Entry: <unknown>
    Active Project: C:\JDeveloper\Ankur\Ankur_App\ViewController\ViewController.jprNo relevant jars in:
    C:\JDeveloper\Ankur\Ankur_App\ViewController\ViewController.jpr
    Dec 27, 2009 9:47:11 PM com.oracle.webapp
    SEVERE: Error calling onEntry oracle.adfdtinternal.view.rich.addin.plugin.ADFFacesJsfWizardExtension
    java.lang.NullPointerException
         at oracle.ide.net.AlikeStrings.packStringArray(AlikeStrings.java:192)
         at oracle.ide.net.AlikeStrings.<init>(AlikeStrings.java:445)
         at oracle.ide.net.JarIndex.buildFullIndex(JarIndex.java:982)
         at oracle.ide.net.JarIndex.run(JarIndex.java:1507)
         at oracle.ide.net.JarIndex.getEntries(JarIndex.java:478)
         at oracle.jdeveloper.java.locator.JarURLClassLocator.buildIndexImpl(JarURLClassLocator.java:318)
         at oracle.jdeveloper.java.locator.JarURLClassLocator.buildIndex(JarURLClassLocator.java:96)
         at oracle.jdeveloper.java.locator.JarURLClassLocator.getResourceURL(JarURLClassLocator.java:292)
         at oracle.jdeveloper.java.locator.BaseClassLocator.getResourceURLs(BaseClassLocator.java:59)
         at oracle.jdeveloper.java.locator.ArrayClassLocator.getResourceURLs(ArrayClassLocator.java:329)
         at oracle.jdeveloper.java.util.JRLClassLoader.findResources(JRLClassLoader.java:100)
         at java.lang.ClassLoader.getResources(ClassLoader.java:1016)
         at oracle.adf.share.services.ServicesFactory.findServiceRefs(ServicesFactory.java:67)
         at oracle.adf.share.services.ResourceService.getResourcesForType(ResourceService.java:68)
         at oracle.adfdt.library.JDevResourceService.getResourcesForType(JDevResourceService.java:79)
         at oracle.adf.share.services.ResourceService.getResourcesForType(ResourceService.java:133)
         at oracle.adfdtinternal.view.rich.pagelayout.provider.ResourceServicePageLayoutProvider.getPageLayoutInfos(ResourceServicePageLayoutProvider.java:38)
         at oracle.adfdtinternal.view.rich.pagelayout.registry.PageLayoutRegistry._recreateProjectPageLayoutInfos(PageLayoutRegistry.java:144)
         at oracle.adfdtinternal.view.rich.pagelayout.registry.PageLayoutRegistry.<init>(PageLayoutRegistry.java:111)
         at oracle.adfdtinternal.view.rich.pagelayout.registry.PageLayoutRegistry.getInstance(PageLayoutRegistry.java:32)
         at oracle.adfdtinternal.view.rich.pagelayout.quickstart.PageTemplateHookImpl.setup(PageTemplateHookImpl.java:48)
         at oracle.adfdtinternal.view.rich.addin.plugin.ADFFacesJsfWizardExtension.onEntry(ADFFacesJsfWizardExtension.java:281)
         at oracle.jdevimpl.webapp.jsp.wizards.panels.NewJspTraversablePanel.onEntry(NewJspTraversablePanel.java:125)
         at oracle.jdevimpl.webapp.fusion.wizards.ExpandoTraversable.onEntry(ExpandoTraversable.java:63)
         at oracle.jdevimpl.webapp.fusion.wizards.AbstractWebAppWizard.invoke(AbstractWebAppWizard.java:142)
         at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:372)
         at oracle.ide.wizard.WizardManager$1.run(WizardManager.java:420)
         at oracle.ide.util.IdeUtil$3.run(IdeUtil.java:1079)
         at oracle.javatools.util.SwingUtils.invokeAfterRepaint(SwingUtils.java:520)
         at oracle.ide.util.IdeUtil.invokeAfterRepaint(IdeUtil.java:1092)
         at oracle.ide.wizard.WizardManager$2.run(WizardManager.java:428)
         at oracle.ide.util.IdeUtil$3.run(IdeUtil.java:1079)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Kindly help me to resolve this error.

    If you create a new application and try to create a new JSF page there are you still getting this error?
    If you do then I think something in your installation went wrong - the first step would then be to delete the system directory at: C:\Documents and Settings\youruser\Application Data\JDeveloper and restart JDeveloper.

  • FAQ: How to resolve "Unexpected File Format" error with Flash Professional CS5.5?

    You may encounter errors when you attempt opening or saving files using Flash Professional CS5.5.  To address the above problem, Adobe released an updater for Flash Pro CS5.5 (version 11.5.1).
    The following article explains about the errors and Flash CS5.5 updater released to handle them in detail:
    http://blogs.adobe.com/flashpro/2012/07/24/unexpected-file-format-error-on-opening-flash-f iles-using-flash-cs5-5/

    Which operating system are you using?  If you look in the Adobe Download Assistant is it still downloading the install files?

  • Cannot view a PDF in IE on Windows XP - "Invalid Color Space"

    I am trying to provide a link to a PDF for online viewing:
    http://glencoe.com/sites/common_assets/mathematics/007891647x/LP/FL5MINC3_7_2c_892770_se.p df
    Some users can see the PDF with no issue, other users with Acrobat reader 9 on Windows XP receive this error: "Invalid Color Space."
    Does anyone know why I'm getting this error, or more importantly, how to fix it?
    Thanks,
    Rob Underwood

    What's the word on this?  I am still having the same issue.  This is very problematic for many pdfs on many websites! Can someone from Adobe please answer this???

  • Adding a LOV MAP in a Page resulting page (invalid name space error) error

    Hi,
    I am trying to add a new LOV to a region in one of the oracle product self service pages.
    I am getting the LOV region displayed, but the moment I add lov mappings I am gettting the invalid name space error.
    Your help on this is highly appreciated. For your reference I am attaching the error below.
    ElementData.java:103) at oracle.adf.mds.internal.Cache.cacheElement(Cache.java:645) at oracle.adf.mds.internal.BaseCache.create(BaseCache.java:157) at oracle.adf.mds.internal.parse.ElementParser.startElement(ElementParser.java:222) at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source) at oracle.cabo.share.xml.ParserAdapter.startElement(Unknown Source) at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167) at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182) at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301) at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268) at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149) at oracle.cabo.share.xml.ParserAdapter.parse(Unknown Source) at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source) at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source) at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:283) at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:115) at oracle.adf.mds.adapters.DBAdapter.getElementData(DBAdapter.java:324) at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1237) at oracle.adf.mds.MElement.findElement(MElement.java:97) at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:493) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418) at oa_html._OA._jspService(_OA.java:88) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:534) oracle.adf.mds.exception.MDSRuntimeException: Invalid namespace: The namespace "null" has not been registered with the MetadataManager at oracle.adf.mds.internal.MetadataManagerBase.getElementDef(MetadataManagerBase.java:330) at oracle.adf.mds.internal.ElementData.(ElementData.java:103) at oracle.adf.mds.internal.Cache.cacheElement(Cache.java:645) at oracle.adf.mds.internal.BaseCache.create(BaseCache.java:157) at oracle.adf.mds.internal.parse.ElementParser.startElement(ElementParser.java:222) at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source) at oracle.cabo.share.xml.ParserAdapter.startElement(Unknown Source) at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167) at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182) at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301) at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268) at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149) at oracle.cabo.share.xml.ParserAdapter.parse(Unknown Source) at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source) at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source) at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:283) at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:115) at oracle.adf.mds.adapters.DBAdapter.getElementData(DBAdapter.java:324) at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1237) at oracle.adf.mds.MElement.findElement(MElement.java:97) at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:493) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418) at oa_html._OA._jspService(_OA.java:88) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:534) ">
    oracle.apps.fnd.framework.OAException: No data found for region (/oracle/apps/gl/controls/webui/ControlAssociationsPG).
         at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:527)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at _oa__html._OA._jspService(_OA.java:88)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
         at org.apache.jserv.JServConnection.run(JServConnection.java:294)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    oracle.adf.mds.exception.MDSRuntimeException: Invalid namespace: The namespace "null" has not been registered with the MetadataManager
         at oracle.adf.mds.internal.MetadataManagerBase.getElementDef(MetadataManagerBase.java:330)
         at oracle.adf.mds.internal.ElementData.<init>(ElementData.java:103)
         at oracle.adf.mds.internal.Cache.cacheElement(Cache.java:645)
         at oracle.adf.mds.internal.BaseCache.create(BaseCache.java:157)
         at oracle.adf.mds.internal.parse.ElementParser.startElement(ElementParser.java:222)
         at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source)
         at oracle.cabo.share.xml.ParserAdapter.startElement(Unknown Source)
         at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
         at oracle.cabo.share.xml.ParserAdapter.parse(Unknown Source)
         at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
         at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
         at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:283)
         at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:115)
         at oracle.adf.mds.adapters.DBAdapter.getElementData(DBAdapter.java:324)
         at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1237)
         at oracle.adf.mds.MElement.findElement(MElement.java:97)
         at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:493)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at _oa__html._OA._jspService(_OA.java:88)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
         at org.apache.jserv.JServConnection.run(JServConnection.java:294)
         at java.lang.Thread.run(Thread.java:534)
    oracle.adf.mds.exception.MDSRuntimeException: Invalid namespace: The namespace "null" has not been registered with the MetadataManager
         at oracle.adf.mds.internal.MetadataManagerBase.getElementDef(MetadataManagerBase.java:330)
         at oracle.adf.mds.internal.ElementData.<init>(ElementData.java:103)
         at oracle.adf.mds.internal.Cache.cacheElement(Cache.java:645)
         at oracle.adf.mds.internal.BaseCache.create(BaseCache.java:157)
         at oracle.adf.mds.internal.parse.ElementParser.startElement(ElementParser.java:222)
         at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source)
         at oracle.cabo.share.xml.ParserAdapter.startElement(Unknown Source)
         at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
         at oracle.cabo.share.xml.ParserAdapter.parse(Unknown Source)
         at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
         at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
         at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:283)
         at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:115)
         at oracle.adf.mds.adapters.DBAdapter.getElementData(DBAdapter.java:324)
         at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1237)
         at oracle.adf.mds.MElement.findElement(MElement.java:97)
         at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:493)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at _oa__html._OA._jspService(_OA.java:88)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
         at org.apache.jserv.JServConnection.run(JServConnection.java:294)
         at java.lang.Thread.run(Thread.java:534)

    Which version are you using? I believe that adding regions started from CU2. Confirm this.
    Did you set the profle FND:OA Enable Defaults? This may not be the cause for your error but I got some LOV map errors because of this. There is a thread in the forum on this.
    Ensure that your path and spelling are correct. The error shows ...CostPG. Should it be ...RN perhaps? LOV Regions are usually called RN.
    If all else fails open a tar.

  • Erroneous "insufficient disk space" error with WaveStudio 7

    This has been bugging me for over 2 years. I get the "Insufficient disk space" error with Vista x32 and x64 and now with Windows 7 x64 when I've edited a wav file and then try to save it. I have plenty of disk space.
    I've searched till I'm blue in the face but cannot find an answer and am tired of the lame work-around. I know how to copy and paste the entire edited wav into another file and then save it. It's annoying, but it works. What gets me is why is this not fixed?
    Running CTWave.exe as administrator does not work. Running in Windows XP SP3 compatibility mode does not work.
    I have been a faithful Creative Labs user for more years than I care to remember, but this one is shaking my faith. Is there anybody who can explain why this happens, or offer a fix?
    Many thanks and keep on rockin',
    Dave

    You may wish to try these steps in order to solve your issue:
    1. Make sure your computer has the latest Java runtime. To do this, just google search "Download Java", go to the first URL and download that free software. This step should solve most of the "insufficient disk space" problems.
    2. If step 1 failed to work, you can open "My computer", right click on the hard disk you were trying to write your files into. From the "File System" tab, check to see it's "NTFS" but not "FAT32".
    3. If the above two steps do not work, try creating a new partition from your primary hard disk. To do this, click "Start" -> then right click "My Computer" -> "Manage" -> "Disk Management" -> Make sure you shrink a new volume for at least 50 GB to 100 GB free disk space, again please have the NTFS file system. Once you successfully created this new partition, do a format then try writing your music files onto this Disk.
    4. I think the above 3 steps are able to solve your issue. However, there's a bug I found sometime back when Win 7 first released. You can try creating a "temp" folder in your primary system drive, writing any files in there should have no problem as long as disk space is sufficient.
    5. I certainly do not hope that error was caused by your anti-virus programme, but if all failed, you may want to consider temporarily disable your anti-virus software, and if everything works fine, you might want to switch to a new anti-virus programme.
    Cheers.
    Originally Posted by bghcomposer
    Dave, I also have this problem. I recently bought new components for a new computer and put it together myself. I took Audigy 2zs Platinum Pro out of my old computer (if it ain't broke, don't fix it!) and put it in the new one. After getting the drivers and programs downloaded and installed, I too, have an "insufficient disk space" error. It also won't record - where it would work wonderfully on my other computer!
    As a music teacher, I record piano parts for the students to sing to, but I can no longer do that! This would be a great fix! Hope someone responds with an answer!
    Brian

  • Enabling LOG C color space conversion with cLog or sLOG footage.

    Hi Gang,
    I shoot Sony F3, Canon C100 and Canon 5DMk3 cameras in their respective LOG modes whenever possible.   I would like to apply the newly added LOG LUT feature designated for ARRI footage to footage from these cameras.  Although LOG C is different than the other LOG modes, it should be a good starting point to color grading. 
    Unfortunately, I can't seem to get the ARRI Log C toggle option to appear with my footage. Apparently there is a certain Metadata Tag in Alexa footage which must make it possible for the Radio Button to appear.  I basically want to trick my FCP-X interface into believing the footage is ARRI Alexa Log-C footage even though it is actually Canon cLog, Sony sLog or Cinestyle.  Yes, I know the Alexa Log-C profile is a bit different from the ideal profiles for each of these cameras, but it should be close enough for my needs.  I will then fine tune each individual camera's color corrections using the FCP-X color panes.  What I want is the Curve effect which is difficult to mimic using the Standard Color Panes.  BTW, I've been using a 3rd party effect called Natress Curves for this until now, but would like to start using the built-in LUT feature instead since my company has multiple editbays which lack 3rd party plugins.  Also, using the built-in color space conversion looks much simpler than the techniques I've developed for the Natress Plugin.
    Can anyone tell me which metadata tag is necessary in order to activate the LOG-C LUT option?   Thanks  Matt Thomas

    Thanks for the reply BenB.  I appreciate your willingness to help with this topic, but I'm not sure you understand what I want to do and why. 
    I want to use the LUT for its Luma curve in actual color corrections in FCP-X. I am not trying to use it for display of dailies or other uses which are common with LUTs.
    LOG space color space is similar, but not identical with many cameras.   ARRI LOG-C is also very similar to the color space used in Cineon and DPX film scans which I used to see regularly.  The black points may vary, but I can adjust black points in many ways.  The general shape of the LUT curve should be very similar to other curves used to correct other LOG spaces. If these curves were dramatically different from eachother, they wouldn't be defined as LOG space.  LOG is a mathematical formula for how the bits are arranged and reserved in the file structure which is somewhat similar to how stills photographers manage Zone System exposure indexes  There is no magic about the way ARRI defines this.  It is a way for ARRI footage to match 35mm scans easily and other cameras using LOG space such as the ones I am using regularly.  I would LOVE to have Apple include specific LOG LUT's for each camera which I use, but since they have not done that yet, I would like to experiement with the included one which is designed for ARRI LOG-C. 
    I am a very experienced professional and understand very well how and why LUT's are being used in many ways across the industry.  Yes, I use Resolve for certain tasks and yes, it is the best place to do advanced color work.  The new Resolve LOG color correction pane is very useful and superior to all tools I've seen.   But I also use and enjoy the convenience of keeping my material within FCP-X as much as possible.  And in many cases, FCP-X color correction tools are adequate for my needs.  But when using Cinestyle,  cLOG or sLOG footage on my cameras, controlling the rolloff of highlights is very difficult to do with the simple 3-way controls. in FCP-X.
    Since FCP-X has no Luma or RGB curves tool built-in, I currently use the Nattress Curves plugin in an Adjustment layer over my timelines to provide a basic film look. The downside to this is that not all my editbays have licenses for the 3rd party plugins, and also there are some odd workflow issues which would be much simpler to manage the way that FCP-X does with Arri LOG-C footage. 
    My question is how to trick FCP-X into thinking the footage is LOG-C so I can use the newly added checkbox to interpret the footage using the LOG-C LUT in an early stage of color correction while the footage is still managed in Floating Point color space. 
    The LOG-C profile in the Nattress plugin works as a very good starting point for advanced color correction for footage shot by Sony F3, Canon C and Canon Cinestyle cameras.  In fact, it is also a fairly good starting point for GoPro Hero3 ProTune footage as well.  I am not attempting ot use the LOG-C LUT solely for color correction.  Instead, I want to use it for CineGamma tonal correction which is only possible with a proper luma or RGB Curve.   I will then use the FCP-X color panes to ad specific modifications to each camera's footage to more closely match what I'm looking for.  If I'm dealing with a camera with lower dynamic range, I adjust the FCP-X panes to compensate for that particular camera, then Paste these attributes to all the clips from that camera.  This often results in a very good match from camera to camera while using the same LUT for the tonal look.   I would like to test this technique using the built-in ARRI LOG-C feature, but unfortunately, cannot until FCP-X allows me to use the LUT on other kinds of footage. 
    I hope this makes sense.   Keep in mind I am a very experienced and technical user and have a long history in the blogosphere and forums about these kinds of topics.  I have very specific reasons for why I want to do this, and until Apple provides other LOG correction tools or a bonafide Curves tool, I am seeking to find a way to use the LOG-C as an alternative solution.  BenB, it could be that Apple has closed out the LUT from other types of footage because of comments from their close peers which are not exactly helpful to actual real-world users.  There are many more cLOG, sLOG and Cinestyle users using FCP-X than there are ARRI users and it is unfortunately they chose to limit their features to exclude these somewhat arbitrarily.  My goal is to find a workaround for this odd decision and would love any tips or suggestions if the answer lies in the footage Metadata.

  • How to find the Color Space name for a PDEElement

    Hi
    I am trying to find out the color space for each PDEElement in my PDF file. While doing this,
    I put some debug statements ( cout stmts ) that print the color_space as integer values. I gave this list
    after the code.  I belive the color spaces should be something like CMYK, DeviceRGB,DeviceGray..etc.
    How can I know the actual color space name coresponding to these numbers printed in Debug statements.
    Kindly please help me..
    void   ProcessElementDetails(PDEElement  element)
                    PDEGraphicState  gfx_state;
                    ASInt32  pdeType =  PDEObjectGetType(reinterpret_cast<PDEObject>(element));
        ofstream outfile("E:\\temp\\test.txt",ios::app);
        outfile<<"ProcessElementDetails\n";
        if ( pdeType == kPDEText )
          outfile<<"PDE Text type\n";
          PDEText pde_text = (PDEText) element;
          ASInt32 num_run,i;
              num_run = PDETextGetNumRuns(pde_text);
          outfile<<"Number of Runs for PDEText :"<<num_run<<"\n";
          for  (i = 0; i < num_run; i++)
            PDETextGetGState(pde_text,kPDETextRun,i,&gfx_state, sizeof (PDEGraphicState));
            ASAtom  color_space =  PDEColorSpaceGetName(gfx_state.fillColorSpec.space);
            outfile<<"Color Space :"<<color_space<<"\n";
        if (pdeType == kPDEImage )
          outfile<<"PDE Image type\n";
          PDEElementGetGState(element,&gfx_state,sizeof (PDEGraphicState));
          ASAtom color_space = PDEColorSpaceGetName(gfx_state.fillColorSpec.space);
          outfile<<"Color Space :"<<color_space<<"\n";
        if (pdeType == kPDEContainer)
          outfile<<"PDE Container type\n";
                            PDEContent  content =  PDEContainerGetContent(reinterpret_cast<PDEContainer>(element));
                            ASInt32  numElem =  PDEContentGetNumElems(content);
                            for  (ASInt32  i = 0; i < numElem; i++)
                                 element =  PDEContentGetElem(content, i);
                                 ProcessElementDetails(element);
    Debug statements with color numbers:
    ====================================
    ProcessElementDetails
    PDE Image type
    Color Space :700
    ProcessElementDetails
    PDE Text type
    Number of Runs for PDEText :63
    Color Space :388
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :388
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :388
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    ProcessElementDetails
    ProcessElementDetails
    PDE Text type
    Number of Runs for PDEText :38
    Color Space :389
    Color Space :700
    Color Space :390
    Color Space :388
    Color Space :390
    Color Space :388
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :390
    Color Space :389
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    Color Space :700
    SeparateColorPlates
    PDF file exists
    Number of Pages:1
    Number of Elements:5

    As you may have noticed, the "numbers" you see are actually of type ASAtom -
    which is a type declared in the SDK to represent reused strings. You have to
    read the relevant documentation to learn how to use the SDK - there is no
    way around it. The Acrobat SDK is very powerful, but also a lot more
    complicated than most people expect when they start to work with it. Take
    your time to learn how to use it.
    In this particular case, you need to call this function to convert the
    ASAtom to a string:
    const char* ASAtomGetString<http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html#ASAtomGetString135%28%29>
    (ASAtom<http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html#ASAtom>atm)
    (from
    http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AS_Layer/ASAtom.html
    Karl Heinz Kremer
    PDF Acrobatics Without a Net
    [email protected]
    http://www.khkonsulting.com

  • How to restart after table space error

    Hi,
    While loading a big file ( 360 MB)  with the File -> XI-<ABAP prodxy from source, we got the table space error in middle of load. Due to Content conversion split for 20K we normally get many messages per load.
    In this case after basis increased the disk space, how do i restart the process so that it start from where it is left. I checked Moni and there is no Que. I checked RWB for adapter also and there is no message with error. I also checked integration and all possible places..
    The Alert that came in for failure has a message ID. I checked and found that message ID has been processed successfully. Still the count of records at the source does not match with target and lot of records are missing.
    Is there any way to re run the process from where it was left.
    Thanks

    Hi,
    Check following:
    - RWB->Message monitoring->Adapter engine (not integration server)
    -Check for follwing status:
    "Holding", "Waiting" "To be delivering" "Error" your message should be here any of above status.
    Note: in RWB message monitoring select "Adapter engine"
    Regards,
    Gourav
    reward points if it helps you

  • Could you please tell me how to resolve the following import error? Thanks.

    Hi,
    When run the following command to import two tables:SPSSDMRESPONSE_LOG and SPSSSCORE_LOG, there are some error in the log. Could you please tell me how to resolve these error? Thanks.
    Command:
    imp S3SLORL10/Pass1234@SPSS file=/yhan/subTables.dmp ignore=y tables=SPSSDMRESPONSE_LOG,SPSSSCORE_LOG
    There are some error in the log file.
    The log file is:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Export file created by EXPORT:V10.02.01 via conventional path
    import done in US7ASCII character set and AL16UTF16 NCHAR character set
    import server uses AL32UTF8 character set (possible charset conversion)
    export client uses WE8MSWIN1252 character set (possible charset conversion)
    . importing S3SLORL10's objects into S3SLORL10
    . importing S3SLORL10's objects into S3SLORL10
    IMP-00061: Warning: Object type "S3SLORL10"."Info224_T" already exists with a different identifier
    "CREATE TYPE "Info224_T" TIMESTAMP '2011-09-21:06:54:13' OID 'A1F8D176EF2949"
    "07882153DE7E4CC9F9' AS OBJECT ("SYS_XDBPD$" "XDB"."XDB$RAW_LI"
    "ST_T","Response" "Response225_COLL","Property" "ModelOutput223_COLL")FINAL "
    "INSTANTIABLE "
    IMP-00063: Warning: Skipping table "S3SLORL10"."SPSSDMRESPONSE_LOG" because object type "S3SLORL10"."Info224_T" cannot be created or has different identifier
    IMP-00061: Warning: Object type "S3SLORL10"."Metric214_COLL" already exists with a different identifier
    "CREATE TYPE "Metric214_COLL" TIMESTAMP '2011-09-20:09:56:02' OID '98999BF48"
    "84F4BAB81D391109E4BB823' AS VARRAY(2147483647) OF "nameValueT"
    "ype208_T""
    IMP-00063: Warning: Skipping table "S3SLORL10"."SPSSSCORE_LOG" because object type "S3SLORL10"."Metric214_COLL" cannot be created or has different identifier
    IMP-00017: following statement failed with ORACLE error 942:
    "ANALYZE TABLE "SPSSDMRESPONSE_LOG" ESTIMATE STATISTICS "
    IMP-00003: ORACLE error 942 encountered
    ORA-00942: table or view does not exist
    IMP-00017: following statement failed with ORACLE error 942:
    "ANALYZE TABLE "SPSSSCORE_LOG" ESTIMATE STATISTICS "
    IMP-00003: ORACLE error 942 encountered
    ORA-00942: table or view does not exist
    Import terminated successfully with warnings.

    *Import of table containing object type(s) fails with IMP-00061 IMP-00063 [ID 203822.1]*
    in short: search for the TOID_NOVALIDATE parameter

  • How to resolve database PSU conflict errors

    Hello:
    I am in process of applying the database PSU Patch 18522512 for 11.2.0.3 and running into conflict issues with other patches, please take a look at the following conflict issues and let me know how to resolve these conflict issues and installed the PSU patch 18522512.
    /cherdb_1/oracle/VIS12/11.2.0/PATCHES/PSU/18522512
    cheron.aarcorp.com:(oracle):> opatch apply
    Oracle Interim Patch Installer version 11.2.0.3.6
    Copyright (c) 2013, Oracle Corporation.  All rights reserved.
    Oracle Home       : /cherdb_1/oracle/VIS12/11.2.0
    Central Inventory : /vol01/app/oraInventory
    from           : /cherdb_1/oracle/VIS12/11.2.0/oraInst.loc
    OPatch version    : 11.2.0.3.6
    OUI version       : 11.2.0.3.0
    Log file location : /cherdb_1/oracle/VIS12/11.2.0/cfgtoollogs/opatch/opatch2014-08-06_10-59-59AM_1.log
    Verifying environment and performing prerequisite checks...
    Composite Patch 18522512 is a bug superset of 16929165,16992075,17468141,13001379,14123213,13931044,9858539,8547978,14237793,14207902,13923995,13544396,13528551,13499128,13477790,13466801,13366202,13259364,13070939,13036331,12971775,12845115,12780983 in OH.
    Composite Patch 18522512 conflicts with installed patch(es) 17875948, 16040940, 19078951, 17693770, 17912217, 13004894, 14649883, 12942119, 16438289, 13040331, 17600719, 13146719, 18116376
    Conflict Description:
    Here are the specific sub-patches of composite patch 18522512 that conflict with 17875948, 16040940, 19078951, 17693770, 17912217, 13004894, 14649883, 12942119, 16438289, 13040331, 17600719, 13146719, 18116376
    Sub-Patch 13696216 conflicts with 19078951 conflicts with 18116376
    Sub-Patch 13923374 conflicts with 19078951
    Sub-Patch 16056266 conflicts with 19078951
    Sub-Patch 16619892 conflicts with 19078951 conflicts with 17912217 conflicts with 17875948 conflicts with 17600719 conflicts with 16438289 conflicts with 13004894
    Sub-Patch 16902043 conflicts with 19078951 conflicts with 17875948 conflicts with 12942119 conflicts with 13146719 conflicts with 13040331
    Sub-Patch 17540582 conflicts with 19078951 conflicts with 17693770 conflicts with 14649883
    Sub-Patch 18031683 conflicts with 19078951 conflicts with 17875948
    Sub-Patch 18522512 conflicts with 19078951 conflicts with 16040940
    Conflict Remedy:
    Refer to My Oracle Support Note 1299688.1 for instructions on resolving patch conflicts.
    UtilSession failed: Composite conflicts with existing oneoffs.
    Log file location: /cherdb_1/oracle/VIS12/11.2.0/cfgtoollogs/opatch/opatch2014-08-06_10-59-59AM_1.log
    OPatch failed with error code 73
    Thanks & appreciated for your help.
    Syed.

    Hi Syed,
    You can raise SR for merging the conflict patches and refer to the MOS document provided to resolve.
    Thanks,
    Uday

  • How to resolve the dump Syntax error in program /1BCWDY/824VCAJI0ED4WMLLJ7N

    I have created 4 components and I have linked them to a single web dynpro application component through an interface.
    This is working fine in development.
    When we moved all these objects to quality and when i run the application it is opening the default component. However when i try to call any other component it is giving the following dump.
    Syntax error in program /1BCWDY/824VCAJI0ED4WMLLJ7NV==CP.
    When we debugged we found that this dump is arising in the CREATE COMPONENT method.
    Please suggest how to resolve this issue.

    Hi,
    Using the method prepare_dynamic_navigation i am calling all the components.
    After this method i have written the following code for deleting the active and create the new component.
    Delete the active componet if any before bind the called component
      IF wa_cmp_usage-component_usage->has_active_component( ) IS NOT INITIAL.
        wa_cmp_usage-component_usage->delete_component( ).
      ENDIF.
    Bind the compont called to this main component
      wa_cmp_usage-component_usage->create_component( lv_target_comp ).     -
    > when i debug, inside this am getting dump.
    In ST22 the error is occuring in the following place.
      call method (l_gen_class_name)=>if_wdr_classloader~create_instance
        receiving
          component_instance = me->component_factory.
    I am actually 5 components. The default and the fifth components are only having tab and a text view. There are no other UI elements. These two components are working.
    The remaining components are having many UI elements and these components are giving the above said dumps.
    Edited by: Mohamed Aslam on May 13, 2010 12:11 PM

  • How to resolve a 'no sound' problem with UPI Grand Piano application?

    I have purchased the UPI piano from the AppStore, but am at a loss to know how to resolve the problem of a silent piano. I have entered the 'Audio & Midi Settings' zone within the application more times than I care to remember and need a wise owl to end my frustration sooner rather than later. The set up recognises my keyboard - a Yamaha MOX8 - as the MIDI input lists five numercial ports that could be ticked. Port A is the default MIDI port. Within the routing section, the plug in output merely shows 'Main Out Left' & 'Main Out Right' and under the Physical Output label, "None" appears twice to correspond, but without any options. The Audio Device correctly identifies Core Audio & the Yamaha MOX8 as the API and ouput device, respectively.
    So, what am I missing here? Probably something that a child of six could fathom in an instant. If you are or know one or are just a wise old owl, pregnant with knowledge: please put me out of my misery, so that I can just enjoy using this wonder of technology (I hope). Thank you.

    Contact the app's developer at the support link on the app's Mac App Store page.

Maybe you are looking for

  • Windows 7 Install Hangs at "Starting Windows" Screen

    Having problems installing Windows 7 Home Premium from DVD on a newly built computer. When I run the Windows 7 Home Premium disc I get past "windows is loading files..." and then freeze on "starting windows" just after I see 4 little colored balls in

  • Power mac g4 MDD put a second hard drive in it and wont boot up with it in

    hi i have a second 150g hard drive i just put in my powermac and it will not boot up with it im kinda new to this which is why i bought an a MDD to **** with but i probably shouldnt have done this but i booted the computer up with out the new hard dr

  • How can I watch MKVs on a DVD player and keep 5.1?

    Hi, I have several MKV files which I want to convert to play in a DVD player/Xbox 360. I want to keep the hi def and 5.1 sound in the newly encoded file. I have tried using Handbrake with some success. The video is outputted in hi def and it plays in

  • Q10 questions, Auto Cc & iCloud Calendar Sync

    Hello everyone, I have 2 questions as below: 1. Auto Cc function is missing. 2. iCloud Calendar Sync always error. my Q10 is under 10.1.0.4181 I'm very appreciate for your support.

  • Mobile hotspot option  not present ANYWHERE!

    hello I bought my iPhone 6 plus from UAE and it is a 64 gb model running on IOS 8.1.2 and whenever I try to use my mobile hotspot option it is not present ANYWHERE I tried to find it in the cellular data option but it's not present over their nor is