How to restart the mac like the first time you use it?

how to restart the mac like the first time you use it?

Surefire way is by completely reinstalling the OS after erasing the Macintosh HD boot volume.
I think there's a way to coerce the Setup Assistant to run once again like on First Start, but requires erasing a couple of files in the drive. Don't know which ones right now.

Similar Messages

The first time you use nike + do u have to wake up the sensor?

the first time you use nike + do u have to wake up the sensor?

There is no need to charge it before you first use it. You cannot run the battery too low as the system will shut the device off before that happens to protect the battery.
Generally speaking, your Lithium battery will have the longest useable life if you avoid deep cycles. Since you can plug and unplug it as you wish, the best thing to do is just charge it up (however much) whenever it is convenient to do so (whether it is 10% discharged, or 20% or 50% - basically don't pay any attention to the battery level, just plug it in when it is convenient to do so to keep the battery topped up). And try to avoid frequent deep cycles where you run it all the way or very near to the point it auto-shuts off.

How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

It should not take very long. Up to thirty seconds tops depending on your Wi-Fi network.
Try rebooting your Wi-Fi router. Turn off the router for 30 seconds then turn it back on. After the router completes its startup routine and indicates a good connection to the internet start you iPad again and see if it will connect.
If you still have problems you might try connecting to a different Wi-Fi network. Maybe one at your local coffee shop or library.

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

HT2589 the first time you create account, always need a credit card? the option of "NONE" is hidden

the first time you create account, always need a credit card? the option of "NONE" is hidden
my friend cant download apps, because of that reason.

No you don't always need to enter credit card details, it just depends upon how you create the account - unless the instructions on this page are followed when creating a new account : http://support.apple.com/kb/HT2534
then you will need to entercredit card details will need to be entered before the account can be used to download any item from the store.
If you don't have or don't want to enter credit card details then you will need to create a new account, and this time use the instructions on that HT2534 page when creating it. If you want to use the same email address then you will need to replace it on that account first e.g. by logging into it via the Store > View Account menu option on your computer's iTunes or via http://appleid.apple.com
Creating an account with 'none' via a computer's iTunes : https://discussions.apple.com/message/24321860

I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

I think that we all understood what you meant. If the extension cord is no longer working, then return it.
We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
Edit - one upped by the lovely lady with the pretty kitty avatar

HT5624 I've opened up iTunes and went to buy a song, but then it came up with a box saying "this is the first time you are purchasing an item on this computer" even though my computer is authorised. What do i do?

I've opened up iTunes and went to buy a song, but then it came up with a box saying "this is the first time you are purchasing an item on this computer" even though my computer is authorised. Then when i put in my password it takes me to the security questions and i dont know what the answers are. What do i do?

A computer can be authorized to play content purchased using a particular Apple ID (the iTunes Store account). However, being authoized to play content is not directly related to being able to buy content using that Apple ID.
For example, a parent may purchase content for a child and authorize the child's computer to play that content, but that does not mean the child is able to purchase content using that Apple ID.
If this is your Apple ID, you should know the answers to the security questions. If you do not, you'll need to contact Apple iTunes Store customer support
http://www.apple.com/support/itunes/contact/

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

If this is the first time you received this mail, it contains the history for the entire month

HiYa,
this is the message I get when I try to send a message from my website created with Adobe Muse and uploaded via FTP:
"Form PHP script is missing from web server, or PHP is not configured correctly on your web hosting provider. Check if the form PHP script has been uploaded correctly, then contact your hosting provider about PHP configuration."
I know this is an old issue but there must be a solution.......
Apart form this message I get as well in my mail this one:
Note: If this is the first time you received this mail, it contains the history for the entire month so far.
Below are the recently upload scripts that contain code to send email. You may wish to inspect them to ensure they are not sending out SPAM.
/home/thepixel/public_html/scripts/form_check.php:108:           {
/home/thepixel/public_html/scripts/form_check.php:109:                $sent = mail("[email protected]", "Hi", "test message", "From: [email protected]");
/home/thepixel/public_html/scripts/form_check.php:110:                if($sent)
Can anyone help me..?   thank u very much

That is not entirely true. Mues does generate PHP files when you use the formular widget.
Furthermore, it generates a file named form_check.php which is apparently meant for checking the server-configuration. The file even attempts to send testmails to the adresses seen in the OP.
Sadly, this file is completely unsecure and can be called by anyone who knows the name.
Hence this file can very easily lead to errors and spam-warnings from your provider.
Until Adobe decides to fix this or to atleast warn users about the existance of that file, I suggest you add the following lines to a .htacces file on your server:
<FilesMatch "form_check.php$">
deny from all
</FilesMatch>

The more times you use your charger the less efficient it becomes?

So is this true?
I heard somewhere that the more times you use your laptop charger, the less effiecient (i.e. slower to charge) it becomes.
I also heard it is very bad for the charger(as well as the environment) to leave it plugged in while its not in use.
Can anyone shed some light on this?

Neither of these crackbrained notions is true, though the adapter does draw about one watt of AC power when it's plugged in and nothing is connected to it. Leaving it like that 24/7 would run your electric bill up by nearly a third of a cent per day, if you never plugged the MagSafe into your computer at all. Whatever else you're doing with your life has a heckuva lot more impact on the environment than that does.

I have a Mac Mini, and it won't accept connecting my Sony video camera. So I got a SD mem card reader to unload my movies from. It worked the first time I used it a few months ago. This time it says it doesn't recognize the format I am trying to use?

I have all thenecessary updates. I have switched over from a PC to Mac back in April and have nad nothing but problems adapting. I don't know why this worked the first time, and put my videos inti imovie, and now it doesn't recognize it at all. And the Mem card reader does work, because I just put the SD card from my regular camera into it and it downloaded those fine, it just won't take my movies!

Which sony camera? I have a Sony HDR-CX550 right now and have been able to use the SD card as well as connect the camera directly. I also had CX110 that work too. You may want to try to copy the complete top level folder from the SD card to the Hard drive, then try to "import from Camera archive" and select that folder.

Reader 9 on a Mac always says it's the first time you've opened this PDF

Since upgrading to Reader 9 Intel Macs every time I click on a PDF file to open it Reader says "You are opening the application Adobe Reader for the first time. Are you sure you want to open this application". Most annoying. Never did it with V8.

Thanks a million that fixed it. Man I had loads of permissions to fix but that must have been one as it now works fine. If I could impose on your knowledge one more time. I have been talking to Dave Taylor at Gamerzines magazine. It's a series of Gaming magazines using Reader and displaying Flash content such as Game videos etc. I'm using V9 and Flash 10 but all that happens when I click on a link on the magazine it just says buffering and nothing happens. Any ideas? I've set Multimedia Legacy to Flash and Trust has Flash as Always Allow. Plus the correct link is in the Trust Manager.

I have a Macbook pro that I bought in 2008. I recently installed Maverick. For the first time, I used headphones. Now I cannot get sound without them.

I have a Macbook Pro that I bought in 2008. A few months ago I installed OS 10.9.1. A couple of days ago I used headphones for the first time ever. Now I cannot get sound without them. Help?

Hi, lolabev.
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Cheers,
Jason H.

Create Planning Application for the first time without using workspace

hi,all:
I come across a problem:The Hyperion Planning Application isn't configured into the workspace,but i have to create a Hyperion Planning Application for the first time.So, have any other methods to solve this problem? Can I use other tools or something to create it?
thanks very much

yellow wrote:
Hi,John,Thanks for your quick reply.
I think after install Hyperion Planning,at first time can't create application in this address:http://localhost:8300/HyperionPlanning/ ,usually create it in workspace.
Is the address you said different from http://localhost:8300/HyperionPlanning/?
thanksI gave you the address to create a planning application directly - http://localhost:8300/HyperionPlanning/AppWizard.jsp
Notice the AppWizard.jsp on the end.
If it version 11 you will be able to create your datasource from that location, if it is version 9 then you will have to create a datasource first from the configuration utility.
Cheers
John
http://john-goodwin.blogspot.com/

How to restart the mac like the first time you use it?

Similar Messages

Maybe you are looking for