Macbook on a netgear mr814 Wifi network

Hi
I'm the net-admin for a wifi-network based on Netgear Mr814 routers. I have a problem getting a Macbook connected wireless.
The Macbook is bought in US and the Mr814 uses channel 13. (Its located in Denmark, Europe).
When I change the channel to the range 1-11, the Macbook connects and all works 100%.
But channel 12 and 13 does not work.
I'm not a Mac-man, so perhaps this is a stupid question :
Where can I set the region for the airport-card.
I think it's set for US, so only channel 1-11 is allowed.
Can I set it for Europe ??
The Macbook has a danish OS X.
Hope you can help.
Regards
Sthh

Hi sthh,
Honestly I don't know if we (users) are able or allowed to modified the airport region. Is there any Danish macbook that able to use channel 12 -13 as far as you know?
Maybe there is third party software that can hack it, but I cannot find any yet. Or check the vendor for airport (Broadcom?) for firmware updater, but I believe irt will void your warranty.
Try to discuss that with your Danish apple store, they might be able to replace your airport to one that compatible with Denmark area.
Good Luck.

Similar Messages

  • My macbook is connecting to a wifi network, but my ipad in the same room does not recognize it.

    my macbook is connecting to a wifi network, but my ipad in the same room does not recognize it.  I have reset the ipad settings, etc.  Any ideas?

    Try a restart of your entire system. Shut down both your modem and your router if they are two separate devices. Then restart each item one at a time with about three minutes between each device.
    Also reset the iPad by pressing and holding the Start and Home keys together, ignoring there'd slider until the Apple logo appears.

  • ITunes downloads fast on old Mac mini but slow on brand new Macbook Pro on the same WiFi network?

    Hi all,
    I have an old Mac mini that's from around 2008 and runs on Snow Leopard. I also have a brand new Macbook Pro with retina display that's running Mountain Lion. Both running iTunes 10.6.3.
    I never noticed anything wrong with my MBP's connection speed until last night when I downloaded a free TV episode from iTunes. The download speed varied between 20KB/s and 40KB/s and it took me 7 to 8 hours to download a single episode. I checked my internet connection but there was nothing wrong with it, SpeedTest.net told me I had a download speed of 94MB/s and upload speed of 80MB/s, it was only iTunes that was unbearably slow.
    Today I was browsing iTunes again and was planning to buy some movies, but again it took forever for the trailers to download. So I fired up my Mac mini just to see if it would be just as slow. Turned out my Mac mini could download the same trailers from iTunes at a much higher speed than my MBP (around 3MB/s on the ones I tested).
    So what gives? They are on the same Wifi network provided by an Airport Extreme, and although my iPhone and iPad are also connected to it, no one else is doing any heavy duty downloading.
    Thanks in advance!
    Keywords: iTunes download speed, slow iTunes downloads, different connection speeds on different Macs, slow iTunes connection, iTunes takes a long time to download

    It's possible the DNS setting your ISP is using are interfering. Although your PC works OK Macs can be sensitive to DNS settings. Here is a MacWorld DNS Troubleshooting article that explains the issue and below is how to fix it.
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences
    11. Try out your MBP and report what happened.
    Roger

  • MacBook Pro Retina stopped detecting wifi network in one location.

    Hey everyone, experiencing kind of a weird problem and was hoping someone would be able to help.   I was doing some studying at a Starbucks, connected to their WiFi network when randomly my computer lost connection to their network and was no longer able to detect that it even exists. I was worried this was some sort of problem with my wifi card as it could no longer detect any networks nearby, where as before it was detecting multiple networks in the area of the Starbucks. Oddly i was still able to connect to the network on both my iPad 2 and iPhone 4S. Upon returning home I was relieved to find that I was still able to connect to my home wifi network. Since then i've been to many locations with my laptop but not once had an issue connecting to or detecting wifi networks, with the exception being at that Starbucks location. I've returned many times hoping that the problem would somehow fix itself, and that maybe it was just a problem with their network, but that doesn't seem to be the case. It seems to be that for whatever reason something happened to the MacBook pro while I was at that Starbucks location that has caused it to no longer detect the wifi networks there, and only there.  One possibility could be the I updated Mountain Lion to the 10.8.2 supplemental update while there, but I don't see how that would cause the problem. If anyone has any ideas as to a solution that would be greatly appreciated.
    Thanks in advance!

    I considered the network hog point, but I don't believe that I was using any excessive amounts of bandwidth. Also, because I can no longer detect any networks at the Starbucks location (not just the Starbucks network) I don't believe that this is the problem. Also, when I updated the operating system I was sure to disconnect from wifi first, I had already downloaded the update on my home network, just had yet to restart to install it, so my security shouldn't have been an issue either.  How exactly can I go about masking my MAC address so I could double check to see if it was the network issue?
    Oh, also, I booted into Windows 7 via boot camp and for some reason Windows is also unable to detect any networks while at Starbucks as well, which is even more confusing.  I don't know if it's worth mentioning, but I bought this MacBook pro retina in Canada and am now in There UK for school. I've heard that north American macs don't play well with one of the network channels that is commonly used over here, so that also may play a role in all of this. But considering that I was able to consistently use their wifi for a couple weeks with no issue, I don't see how that could be the problem. As far as WEP encrypted goes, the network is unsecured so I don't believe that's the problem.
    Thanks for the response, I appreciably appreciate it!

  • My 13 inch Macbook Can Not find ANY wifi networks! Help!

    I turned on my Macbook today only to find that no wifi networks are showing up, not even the neighbors! Im connected to the eather right now. My roommates laptop PC can connect fine. I need some help fixing it. Why is it not finding ANY networks at all?

    Open System Profiler and check if the compter can still recognize your wireless device. Try resetting the SMC as well and see if this helps.
    http://support.apple.com/kb/ht3964

  • Why is my MacBook Air slow on any WiFi network?

    I have been having a strange issue with my 2013 11" MacBook Air (Mavericks 10.9.2).  It has seemed very pokey on internet lately.  The past couple of weeks in some places I have not been able to get online via wifi, including GOGO on Delta, which has never been a problem (iPad and iPhone got on right away).  So back to my house, which is on a Time Warner 30Mbps cable internet service. A browser speed test is only showing 1-3Mbps, which is on a Time Warner 30Mbps internet service.  I am getting terrible speeds as I mentioned.  Today I reset the modem and my airport extreme.  Then I took a MacBook Pro I have and went direct into modem with ethernet cable and speed went into the low 50Mbps!!!!!  So then I took the same MacBook Pro and went back to wifi, speed test still very strong - 30Mbps or better.  But back to my MacBook Air, and speed test only 1-3Mbps.  I also tried speed test on my iPhone, and it also shows 20-30Mbps.  So now I am convinced something is weird in my MacBook Air - the network and airport extreme don’t seem to be the problem.  I dont know what else to do on the MacBook Air to try and resolve this issue.  Can anyone give me any ideas?  I tried zapping the PRAM, still no help.  Thanks for any input or ideas!

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • How to install a via wifi TC in an existing netgear N WiFi network?

    It has been explained as possible but I believe this is not that easy, even for apple, to create/install

    It is not recommended.. so the option is not visible unless you hold the options key when you select wireless mode.. if you hold options, it will have Join a wireless network.. fill in the details. Wireless Name.. ie SSID in everyone but Apple Speak. And the password for wireless.
    You will now have dropped the speed to the TC by half its already low speed at 2.4ghz.
    MUCH BETTER METHOD
    Plug the TC into the netgear with ethernet..
    Bridge the TC..
    You can then either..
    1. Turn off the wireless and just use the existing netgear wireless network.
    2. Leave the wireless on using different SSID and connect to the TC rather than the Netgear.. watch auto channel setup.. much better to do this manually.. but it might add 5ghz for you if the Netgear doesn't cover that band.
    3. Set up wireless roaming where you use identical SSID and security to the existing Netgear.. but lock to different channel.
    This is much more useful if the TC is located far away from the netgear to actually give you a better wireless coverage.

  • Macbook air unable to join wifi network

    I have a brand new MacBook Air and am new to Macs, but have a very good understanding of PCs. I constantly have to reenter our wireless security code for Wi-fi.  Now I am receiving a message that says "the computer was unable to join the wi-fi network you selected".  What am I doing wrong?

    After a 30 minute phone call with Support, nothing worked still! In the end he suggested changing the channel of the wireless router/modem.  I tried to do this (after research online on my imac) and then lost all internet connection. The router/moden no longer worked at all!  Then had to call the support line for the router; spent another hour or so trying things, but to no avail. In the end have had to buy a new modern modem router (Belkin Dual band N+ PLAY N600 DB) and so far ......................it's working!  But we only bought it this morning. Will report back another day with an update!

  • My macbook pro cannot find any wifi networks unless it is in the same room as the router.

    whats wrong with it and how can i fix this?

    Here is some info from the Apple data base
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    OS X Mountain Lion: Resolve IP address conflicts
    Also is there metal near/around the router, tht can cause issues with radio waves, you may want to try a different location for the router.

  • Macbook air stopped connecting to The Cloud wifi network in the UK

    I used to be able to connect to The Cloud wifi network in local bars, cafes and restaurants on all my apple devices, but my macbook air has stopped connecting to this network. My iPhone and iPad still connect no problem. The bar at the top of my macbook air tells me I'm connected to The Cloud wifi, but I am not taken to the login page and hence can not connect to the internet. This used to work no problem. I'm not sure, but this issue may have occurred around the time I installed OS X Mavericks. I have recently installed OS X Yosemite and still have the same connectivity problem. My macbook air connects to other wifi networks such as my home network and my work clients' networks. Any help or advice anyone can offer would be much appreciated.

    G-band networks generally will have a stronger signal than n-band.
    Tell it to ignore the g network and only connect to the N-band network.
    Open Network System Prefs, select WiFi, and click Advanced...
    Click on the WiFi tab.
    Find you g-band network in the list and delete it.
    Check the box to Remember networks this computer has joined.

  • IPad won't connect to WiFi network, but macbook pro & iphones will.

    Both of my iPhones and my Macbook Pro easily connect to the wi-fi network. I feel like I've tried everything to get my iPad to connect. It used to connect perfectly fine and I'd watch Netflix, but then it started crashing. I work for a non-profit so it's a company network, not my personal one, but it's the only network I have considering I live here! Such a pain!
    I've reset my network settings.
    I've click "Forget Network"
    I've done a hard reset of the iPad multiple times.
    NOTHING WORKS.
    Can some super tech savvy person help a girl out?! I would greatly appreciate it.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

    I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions?  Please??? :-)

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Why will my wifi network not work on windows 7 after bootcamp installation on my MacBook Pro?

    I have recently used bootcamp to install windows 7 on my MacBook. I downloaded the software and everything to install the bootcamp setup on the windows side as well and it seems to be working well, except for when I try to connect to a wifi network. It is a secure, strong network and every time I try to connect, the same message pops up saying "the 'local area connection' is experiencing driver or hardware related problems." What can I do to fix this and successfully get the internet running on my windows side?

    I have come to the conclusion that the newest Macbook Pros are equiped with wifi boards that are not compatible with Windows 7. I'd be very interested to hear if Windows 8 works better!

  • How to connect a wireless drive and stream to my stereo through MacBook. I currently have a non apple WiFi network

    I currently have a PC based WiFi network and am about to buy a MacBook Pro. I have 250 gb iTunes library and 100+ gb of photos. What I was going to get is the 120gb MacBook and run an external drive to store the iTunes library and photos. For intensive photographic work I'd directly connect the drive but day to day I'd connect it to the wireless network. What I want to do is to stream my music, from the wireless drive to my stereo
    Will the drive work this way on my existing router - usb2 connected? Or do I need an apple device.  Should I use an airport or Apple TV to connect to the stereo?
    I also want to have the option of streaming from my iPhone.

    Will the drive work this way on my existing router - usb2 connected? Or do I need an apple device.  Should I use an airport or Apple TV to connect to the stereo?
    I also want to have the option of streaming from my iPhone.
    Hard to say when you don't give us a clue what you current router is??
    USB2 is slow.. it is double slow from a network device.. and even slower if that network device doesn't actually have too much CPU power or RAM..
    Even worse is the idea to move the disk from the network to the local external port.. because then format comes into play.. Apple devices can use FAT32.. yuk.. but really want HFS+.. most routers cannot talk HFS+ except apple ones.. they want NTFS or FAT32.. You can see where this is going.. buy two disks.. one for library.. one for a scratch disk .. usb3 will be great.. or thunderbolt even better. And when finished copy your project to the network drive..
    Think carefully about backups.. they are important too.. might be time to invest in a real NAS. Not toy systems with USB.. dangling off them.

  • MacBook pro can't find any wifi networks. HELP PLEASE

    Ok so my late 2011 MacBook pro15" starTed dropping out of my network every now and then. Rebooting it got it hooked back up again. Now just a few weeks ago its not picking up any real wifi networks (according to my phone and what my computer showed me before there's a bunch in range). It shows this network called setup as the only wifi network in range and when I click on it, there is this little grey picture of a computer where the wifi bars should be.
    Xbox,  phone and all of the roommates devices are hooked up just fine.
    I've taken it out to a couple of coffee shops and its the same thing.  Either seeing no networks or that setup thing.
    I've tried restarting,  verify and repair disk, deleting all of my preferred networks.  I don't know what else to do. 

    Also I've tried to use one of those usb WiFi adapters that essentially bypasses the computers airport card.  That shows all the networks in range but will fail to connect to any of them.

Maybe you are looking for

  • Cost in quotation from PS project

    Hi everybody In this scenario, i´m trying to see the cost from a project (wbs element) directly in the pricing procedure of the quotation to use it only as a reference for the sales price. I already assigned the position in the sales document to a wb

  • CFContent Situation

    Hello community! I am working on an export file which is a pipe (|) delimited file and I am running into some issues. First of all the file is not being generated with the file name that I am specifying. Second, I am getting a ton of HTML in addition

  • Timeout and Result Code 302 from Tuxedo

    My WebLogic server has threads with Jolt connections timeout after ten minutes. The transactions get a result code 302 (Found. Temporarily moved) back from Tuxedo. Why might I receive this result code? Why are the connections timing out? Thanks, D

  • Help w/ .avi playback PLEASE!

    OK I am having a strange issue w/ avi playback on my MacBook. They aren't playing, i'm just getting the broken QT icon instead. Here's some info: • I noticed this directly after loading a movie onto a webpage I publish using RapidWeaver, which I then

  • KANBAN Colour

    Hai, SAP defined some colors for KANBAN status like red for EMPTY ...   .  NOw I want to change the color of  INTRANSIT(Dark Yellow) to other color. Is it possible, then how can I. Thank U KM