How to restrict Customer's of R/3 from entering CRM system.

<b>Dear SAPGurus,
I have an issue at hand and hope with your guidance it can be solved.
We are running CRM 4.0 and have maintained many Sales org in the system, but from a new rollout we want to restrict one newly developed sales org, Since from this Sales org Customers are flowing from R/3 to CRM into the system.
I would like you to help me by guiding as to where can I restrict the Customers of this particular Sales Org from entering CRM system and How can I do it?
Thanking in anticipation.
Regards,
Amit</b>

Hi Singh,
Go to tcode R3AC1, open object CUSTOMER_MAIN, on Filter Setting Tab :
- table structure : KNVV
- field : SPART, VKORG and VTWEG => these represent distribution channel
sales org and sales office
- then enter value for each of that field
Then click Filter Synch (R/3) and Regenerate FIlter.
Go to tcode R3AS to start initial load.
Tell me if this is what you looking...
Gun.

Similar Messages

How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap

Hello Experts,
I am working Document management system(CV01,cv02n,cv03n,cv04n)...
I want to send the documents from one SAP system to Other SAP system
Using ALE/Idocs....
Please Help on this any sample programs....or function module....
Thanks
Preethi

Hello,
Please refer to the thread:
How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap
Best Regards, Murugesh AS

R12: How to Restrict Custom Responsibility to a particular Organization

Hi,
I have created a new responsibility say xx_resp.
I want it to restrict it to paraticualr one organization say ORG1.
whenver any user access any function under this responsibility he/she cannot query any other organization data except ORG1.
Please advise.
-Thanks
SJ

Hi Sj;
Please see below which could be helpful for your issue:
Restrict report to particular User
to restrict the reports based on user responsiblity
How to Restrict a Resp. to Specific Org. in Multi-Org. Setup within an OU
Value Set Restriction in a Report
Regard
Helios

How to Import customized internal table to smartform from Print Program

Hi Gurus,
I want to Import customized internal table to smartform from print program, Can anybody tell me how it is possible.
With regards,
S.Saravanan

There is no problem passing an internal table to a smarforms, smartforms have the same interface as a function module ([Defining the Form Interface|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm] in [Smart Forms|http://help.sap.com/saphelp_nw70/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm]) so could you elaborate a little more on your requirement (is it a standard a custom forms, etc.)
Regards,
Raymond

How to create custom BOL object for dynamic query in CRM 7.0

Hi,
Could anyone please explain me with steps that how to create the custom BOL object for dynamic query in CRM 7.0, I did it in previous version but its throwing exception when i try to create the object of my dynamic query class. I just defined the entry of my in crmv_obj_btil to create the dynamic query BOL object. do i need to do any other thing also to make it work?
Regards,
Kamesh Bathla
Edited by: Kamesh Bathla on Jul 6, 2009 5:12 PM

Hi Justin,
First of thanks for your reply, and coming to my requirement, I need to report the list of items which are there in the dynamic select statement what am getting from the DB. The select statement number of columns may vary in my example for different countries the select item columns count is different. For US its '15', for UK it may be 10 ...like so, and some of the column value might be a combination or calculation part of other table columns (The select query contains more than one table in the from clause).
In order to execute the dynamic select statement and return the result i choose to write a function which will parse the cursor for dynamic query and then iterate the values and construct a Type Object and append it to the pipe row.
Am relatively very new for these sort of things, welcome in case of any suggestions to make it simple (Instead of the function what i thought to work with) also a sample narrating the new procedure will be appreciated.
Thanks in Advance,
mallikj2.

How to restrict user to get values only from F4 in selection screen

Hi All,
We have given a Search hlep for a parameter in selection screen of a report,but now we are facing a issue, whlile executing the report user entering the data directly into field instead of selecting from F4 help.
Do anyone know how to restric the user from entering the data directly.
i have searched the fourm ,but not get any good tread.
Regards
CB
Moderator Message: Search harder, because there are many threads that have discussed the same issue before.
Edited by: kishan P on Dec 27, 2010 4:00 PM

You cna check my reply here To enter the value by selecting values from the F4 help only.

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

How to restrict customer records being displayed using 'sales_channel_type' criteria in customer search form at 11g?

OS: Linux
DB: 11.2.0.3
ERP: 11g
Hi There,
     I would like to create a new custom responsibility, which the responsibility is having access to Standard Customer Form (ARXCUDCI.fmb) , but I would like to make a restriction in the customer search form is that, everytime the responsibility user search by customer number, customer name, party name or what ever search field, I would like to limit to restrict further of searching criteria where SALES_CHANNEL_TYPE = 'RTL' is allowed to populate the customer records, there rest of customer records are not allowed to search out.
    This SALES_CHANNEL_TYPE column is from HZ_CUST_ACCOUNTS table.
    I have tried the Form Personalization already, but the customer searching form has too many fields for user to search, therefore form personalization will be putting all over the places in the form. Therefore I saw others recommended of doing "Custom DLL"...may I know for my scenario, how to I go about Customer DLL? or any other more effective solution?
   Appreciate if anyone can share your experience related to matter above.
Regards,
Lygine

Hi Lygine,
The personalization i sent you works in this way:
-It does not matter which field you choose to enter the query.
-If a record is found, when the form opens and the cursor hits the Customer Name field, the personalization looks for the content of the Sales Channel field.
-If the content of this field is different from the 'RTL' string, the form Customers form (ARXCUDCI) is cleared.
Independently from the field you fill to perform the query, is a record is found, the Customer Name field is the first the cursor hits when the form is opened.
Octavio

How to restrict Customizing button from F1

Hi all,,
I created a role restricitng SPRO in Authorization object S_TCODE to all the end users from adopting SAP_ALL
but
when working with system when the users go for F1 help they could navigate again to SPRO through customizing button from help displayed screen.(Not in every F1 screen).
Example - mm02 when changing material --- Ext. Matl Group
How to disable that Customizing button.
Would be able to provide a brief description if some one would be able to get my issue.
-Rahul

Hi Alex & all,
Im trying to reconstruct the thread in a simplified way.
I have created a new role with few T-codes that is
MM01
MM02
MM03
MM04
MMAM
MM06
ME51N
ME52
ME53
ME5A
ME5K
ME96
MELB
ME54 & given full authorizations.
Again its the same problem with F1 like i explained in my previous postings.What exactly needs to be disabled.
when working with system when the users go for F1 help they could navigate again to SPRO through customizing button from help displayed screen.(Not in every F1 screen).
Example - mm02 when changing material --- Ext. Matl Group
How to disable that Customizing button.
--Rahul

How to restrict/block replication of contact person? SAP CRM 7.0 ehp 2

Hello fellow crm consultants,
I am looking for a (hopefully) standard solution to restrict the replication of contact persons (CP) from crm to ecc back and forth while they are related/linked to a customer.
In this current scenario we create a new customer on the CRM side and immediately link new or existing contact persons to this customer before saving the new entity. Upon save the data is being replicated and creates the same in ECC. However there is not CP replication been setup between CRM/ECC meaning that normally no contact person information is being replicated or synced between these systems. But only when the customer is being replicated including contact person(s) this is information coming through anyways. I want to completely block the CP information and only replicate the customer information.
Is above possible in SAP CRM 7.0 ehp 2 and how through customization?
Thanks in advance.. points will be rewarded.
Regards,
Rogier

Hi,
If you want to replicate only customers from CRM to ECC, you can set a filter in the subscription on IS_CUSTOMER = "X" for example. That will stop replication of contact persons, organization units, employees, etc.
See following oss note: 1834681 - How to set filter for BP upload from CRM to ECC
But for something more complex, you might need to implement a function module and add it to table CRMC_BUT_CALL_FU. Kindly check following oss note for an example:
638628 - No contact person upload into R/3: Example for exit users
Best regards,
Nicolas.

How to handle custom component data on overviewset save button CRM UI

Hi,
I have added a custom component to a standard view which is enchanted.
I can handle any data with my buttons on the component but after editing data
i need the save the data when the save button on the overview(top) is pressed.
I have redefined save button of overview but i cant get my data.
My node name is Root. I think i couldnt bind it to overview.
How can i do that?
Thank you

Probably it can be done by
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebUITechnical-CreatingTableViewInWebUI
i am trying
Thank you

How to show custom header in pdf generated from report

Hi,
I have created a report that is used to display Leave record of employees in an organization. After which it creates a pdf file and send it to respective HOD.
In this case I am trimming generated output and sendinf only required fields to the pdf.
When pdf is getting generated it shows program name as Title of that report.
I want to change this header to my own header along with some variable but not sure how I can do so.
I have also tried TOP-OF_PAGE but problem in this case is that I am still getting program name along with it.
To generate pdf I have used function :
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    exporting
      src_spoolid   = spoolid
      no_dialog     = ' '
    importing
      pdf_bytecount = l_no_of_bytes
      pdf_spoolid   = l_pdf_spoolid
      btc_jobname   = l_jobname
      btc_jobcount = l_jobcount
    tables
      pdf           = l_pdfdata.
Then I had converted this pdf to Binary
call function 'QCE1_CONVERT'
    tables
      t_source_tab         = l_pdfdata
      t_target_tab         = lit_record
    exceptions
      convert_not_possible = 1
      others               = 2.
Then I had created subject matter and used FM : SO_NEW_DOCUMENT_ATT_SEND_API1: to send mail to respective HODs.
I tried dubbing it but couldn't get any variable which is holding program name.
Sorry for putting in wrong forum.
so Closing it from this forum and raising the same in ABAp-General forum.
How to change header of pdf in generated report
Edited by: gaur.yagyesh on Apr 16, 2010 4:03 PM

To make it more clear to my question.
I am using sun one webserver 6.0 sp6.
I need to enable custom header on the webserver so that any request having a custom http header coming to webserver should be captured by the webserver.
Thanks,

How to restrict users in separate OU's from seeing each others presence

We have an Enterprise Lync 2010 server environment in place, and are using msRTCSIP-GroupingID to restrict address book lookups. We are now looking to restrict presence viewing to only user within the same OU. In other words it should not be possible
to see the presence of a user outside of your own OU, unless that user allows it explicitly.
It seems that the Multitenant pack for Lync can arrange that, but it's just not feasible to install that when you already have an active Lync environment in production. Is it possible to achieve this separation another way? Maybe with msRTCSIP-TenantId?
(which is already available in our current schema)

Hi,
Using the GroupingID will completely separate the users into unique address books. But searching by SIP URI will always work and you cannot prevent the users from communicating with other Lync users in the same organization. If you want
to restrict presence viewing to specific users, you can try ABS Configuration Tool.
http://www.justin-morris.net/how-to-hide-users-from-the-lync-address-book/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found
there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

How to call Custom or Component Controller methods from View Controller

Hy Guys,
how do I call Custom Controller or Component controller methods from a View or Context Controlller?
thanks in advance
Jürgen

Hi Juergen
Yes it is possible, pls follow the below approach to access the component controller in context node class
1) since the standard component controller class is protect variable , declare a variable of type component controller in your controller class.
say for example the public variable you declared is g_comp_controller
2) now redefine the controller class method WD_CREATE_CONTEXT and add the below lines of code
   g_comp_controller ?= me->comp_controller.
3) go to context node class (CNXX) there declare the varaible which of type controller class (IMPL) as public variable, for example g_owner
4) redefine the method IF_BSP_MODEL~INIT and write the below code
     CALL METHOD super->if_bsp_model~init
    EXPORTING
      id    = id
      owner = owner.
g_owner ?= owner.
5) now the variable   g_owner that is declared in (CNXX)   contains reference to your controller class
6) in on_new_focus method access your component controller in the below manner and access the entities also.
DATA: lv_owner                    TYPE REF TO xxxxx_impl, " Implementation class
             lr_comp_cont                TYPE REF TO xxxx_bspwdcomponen_impl, " component controller class
             lv_entity type ref to cl_crm_bol_entity.
lv_owner ?= g_owner.
lr_comp_cont    ?= lv_owner->g_comp_controller.
IF lr_comp_cont IS BOUND.
   lv_entity ?= lr_comp_cont->typed_context->mdfcampaign->collection_wrapper->get_current( ).
now lv_entity contains the value of component controller context node.
Thanks & Regards
Raj
Edited by: bmsraj on Sep 27, 2011 3:28 PM

How to restrict access to sub folders (apart from Manual settings)?

Hi,
Is there any method to stop the group traverse from main Folder to sub folder when user group has access to main folder?
So that no need to give no access to sub folders manually for given group.
Manual access settings have become tedious due to large number of sub folder and user groups.
Scenario:-
There is a main Folder F1 and it has 100 Sub Folder SF1 to SF100. And these sub folders has child folders.
Group G1 should have access only F1, and should not have the access its child folders.
How can we eliminate manual work to remove access for each group at each sub-folder level?
Thanks,
Anu

Access restrictons by default are inherited from parent folders downward.
You can break the inheritance, but you'll still need to manualy setup initial security.
Details are in the Admin guide.

How to restrict Customer's of R/3 from entering CRM system.

Similar Messages

Maybe you are looking for