How to restrict the search help given to a field for a specific program ??

Hi,
I have one search help which is attached to a field.
This seach help is using a Z table and showing values perfectly for one program where I attached earlier.
The same fields and Z table I am using is some other related program where user wants to see the restricted values only.
I am not getting, how a search help can be restricted.
I try to take a example of it.
If in first program the search help values are:
Material           Level
Orange              1
Mango               2
Grapes              3
Now in the second program user wants to see only levels not the material. I Have given only two colums for understanding purposes not all .
Please suggest what are the possible ways we can do it.
Thanks right now.
-=Maddu=-

Hi,
Use this event
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_cc.
PERFORM company_code CHANGING p_cc.
FORM company_code CHANGING p_cc.
DATA: dynpfld_mapping LIKE dselc OCCURS 0 WITH HEADER LINE.
REFRESH gt_bukrs.
SELECT * FROM t001
INTO CORRESPONDING FIELDS OF TABLE gt_bukrs.
LOOP AT gt_bukrs.
**ST AS ON 08.09.2006
    AUTHORITY-CHECK OBJECT 'ZREP_TMF'
          ID 'BUKRS' FIELD gt_bukrs-bukrs
          ID 'VKORG' FIELD gt_bukrs-bukrs
          ID 'VKBUR' DUMMY
          ID 'SPART' DUMMY
          ID 'VTWEG' DUMMY.
   AUTHORITY-CHECK OBJECT 'ZREM_ORG'
         ID 'VKORG' FIELD gt_bukrs-bukrs
         ID 'VKBUR' DUMMY
         ID 'SPART' DUMMY
         ID 'VTWEG' DUMMY.
**ST AS ON 08.09.2006
    IF sy-subrc NE 0.
      DELETE gt_bukrs.
    ENDIF.
ENDLOOP.
dynpfld_mapping-fldname   = 'BUKRS'.
dynpfld_mapping-dyfldname = 'BUKRS'.
APPEND dynpfld_mapping.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = 'ZREM_AGENCY_REPORT'
      dynpnr          = '1000'
      dynprofield     = 'COMPANY'
      value_org       = 'S'
    TABLES
      value_tab       = gt_bukrs
      return_tab      = return_tab
      dynpfld_mapping = dynpfld_mapping.
ENDFORM.                    " sale_org
Reward points

Similar Messages

How to find the search help for the parameters stmt in a report

hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statement

I am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful.

How to implement the search help exit to MM01 for Material by product hiera

Hi,
How to implement the search help exit to MM01 T-code for Material by product hierarchy,
but system default it gives the data from MVKE table, my client wants from MARA table,
i created the one Function Module, write this code in that FM.
IF CALLCONTROL-STEP EQ 'DISP'.
REFRESH RECORD_TAB.
SELECT * FROM MARA INTO TABLE RECORD_TAB
WHERE PRDHA =
ENDIF.
I Face the problem what variable i have to pass in WHERE CONDITION, FROM THE MM01 T-code.
is't require to IMPORT variable from MM01 program, what is that import variable, please give me the solution.
thanks to all.

Hi there..
check my web blog on search help exit...
[Search help exit code|https://wiki.sdn.sap.com/wiki/x/du0]

HOW to Restrict the input Help for 0MATERIAL in the BPS Layout

Hi,
I have requirement to Restrict the input Help for 0MATERIAL in the BPS Layout.
For Example if the Planning Package is Restricted to SALES ORGANISATION ( 3000 ) then the system shuold check the 0MAT_SALES where SALES ORGANISATION IS "3000" )AND PASS THE Material Numbers to the 0material list.
I have Copied the standard Funtcion group "UPF_VARIABLE_USER_EXIT" to Z fucttion and have attached to Z Variabe as User Exit .
this Variable is Attached to 0material in the Planning Pakage. So tha now the 0MATERIAL is restricted to the variable which is having the User Exit.
But how to acces the Values of Planning Package for which the Layout is bein Executed from this Z User Exit ???
I Know how to restrict the input help, but my only problem is that how to get the values of Planning package through this User Exit.
Please suggest if it is possible.
Regards,
Nilesh Labde

Hi Nilesh,
As I understand from your question,you know how to restrict but the issue is to know the value in the package with which you need to restrict.
There are two tables which can help you finding the value used in package for sales organisation:
1. UPC_PACKAGE
2. UPC_OPTIOS
How to use ?
From UPC Package you will get one GUID, Hit the second table UPC_OPTIOS with this GUID.
In field "FIELDNAME" enter the name of the characteristic whose value is req (sales organisation in your case)
Hope this helps you
Mann

How to locate the Search Help?

Hi,
According to the following code the search help is cram, but when I went to the "crhd" Dictionary using SE11 could not find any search help for field "arbpl" such as cram. This means there is another way of finding the search help.
SELECT-OPTIONS zw_werks FOR crhd-arbpl MATCHCODE OBJECT cram
Thanks,
Kishan

Hi Surjit,
The Code works perfectly. I copied this code from another program and confused from where the "cram" search help come from. It's not in the Dictionary of "CRHD" and field "ARBPL".
Thanks,
Kishan

How to add a search help on a screen field from screen painter

Hi,
I would like to add an existing Search Help on a screen field in Screen painter.
Of course it's possible to just click on th screen field and in the property box, I just have to set the name of teh search help.
The problem is that I need the screen field to be grey and user musn't be able to change the field value if he doens't use the search help.
I'm not allowed to modify the existing search help or to built it on my own from source code, I must use the existing one.
Do you have an idea on how to do so?
Regards,
Morgan

Dropdown Box:
In the screen painter for that field goto properties -> Dropdown ->select listbox.
Option 1:
Instead let that field be in change mode and if user enters any wrong entry which is not there in the table give a error messgae.
CHAIN.
 FIELD addr1_data-country.
 MODULE modify_screenfields1.
ENDCHAIN.
MODULE modify_screenfields1 INPUT.
CASE sy-ucomm.
 WHEN 'ENTER' OR 'EXECUTE'.
 IF NOT addr1_data-country IS INITIAL.
 SELECT SINGLE landx FROM t005t INTO lws_landx WHERE
 land1 = addr1_data-country
 AND spras = 'EN'.
 IF sy-subrc <> 0.
 MESSAGE e000(zo_spa) WITH text-022. " Invalid Country code
 ELSE.
 t005t-landx = lws_landx.
 ENDIF.
 ELSE.
 CLEAR: t005t-landx.
 ENDIF.
 ENDCASE.
ENDMODULE. " modify_screenfields1 INPUT
Option 2: Other than if u want the way u like, let that field be greyed out. don't attach the search help.
In the PROCESS ON VALUE-REQUEST.
FIELD addr1_data-region MODULE region_pov.
MODULE region_pov INPUT.
Using the F4IF_INT_TABLE_VALUE_REQUEST table value request show the search help.
also make that field input enabled.
ENDMODULE. " region_pov INPUT
I think this will solve ur problem.
Regards,
Prakash.
Message was edited by: Prakash Ramu

How to disappear the search help in alv

hi experts:
 some field's search help in alv appear automaticly,such as bukrs. I want to disappear the search help in ALV.how it come true?
the alv is CL_GUI_ALV_GRID.
Edited by: huiqing wei on Apr 20, 2009 10:35 AM

In the Layout give parameter NO_F4 = 'X'.
DATA: wa_layo type lvc_s_layo.
wa_layo-no_f4 = 'X'.
call method grid_alv->set_table_for_first_display
 exporting
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* i_structure_name = 'T_MARD'
* IS_VARIANT =
* I_SAVE =
 i_default = 'X'
 is_layout = wa_layo <<<<<<<<<<<<<<<<<<<<<
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
* IR_SALV_ADAPTER =
 changing
 it_outtab = i_mard[]
it_fieldcatalog = i_fieldcat[]
* IT_SORT =
* IT_FILTER =
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

How to limit the search help in the selection screen?

Hi All,
I got a selection option in a selection screen,
say SELECT-OPTIONS KSCHL FOR VAKE-KSCHL.
I want to limit the output list of the search help of this field, e.g. 33 entries for a specific application and usage.
What should I do ?
Thz.

Hi,
U can check with these two
... NO-EXTENSION
Effect
The user can only make an entry on one line. Calling the additional "Multiple Selection" screen is not supported and no pushbutton for this appears on the selection screen.
Addition 12
... NO INTERVALS
Effect
The selection option is displayed on the selection screen without a 'to' field. The pushbutton for calling the "Multiple Selection" screen appears immediately after the 'from' field.
This addition thus allows you to generate a simplified display on the selection screen. This is particularly useful if you are not making any range selections for this selection option.
Notes
On the "Multiple Selection" screen, you can also enter ranges for selection options with "NO INTERVALS".
By combining this addition with "NO-EXTENSION", you can restrict the user to entry of a single value for the selection option, but with the possibility of also choosing single value options like 'Greater than' or 'Less than or equal'.
By using the addition " NO INTERVALS" with SELECTION-SCREEN BEGIN OF BLOCK, you can activate the simplified display for all selection options in a block.
The function module SELECT_OPTIONS_RESTRICT allows you to restrict the set of selection options available for a SELECT-OPTION (for example, only single values and patterns, i.e. 'EQ' and 'CP' are allowed). You can also forbid the leading sign 'E' (= 'Exclude from selection'). This means that you can considerably restrict the selections which can be entered on the selection screen.
Just now tried it out to limit the search help u have to use NO-EXTENSION.
Try this simple code.
Tables: mara.
SELECT-OPTIONS: s_matnr FOR MARA-matnr NO-EXTENSION.
Hope this helps.
Kindly reward points and close the thraed if ur problem got solved.
U havent rewarded any points?
Message was edited by: Judith Jessie Selvi

OSES how to restrict the Search Term

How can SES forbid the words which will be used to search. For example, if I enter "secret" word in the searchTerm box,Then the SES will restrict the search result or will return nothing. How to implement this search restricted function? Can you tell me for this question. Thanks...

You can't forbid the use of particular terms via the standard API. You would need to build an app using the Web Services API, and remove any sensitive terms before submitting the query to SES.
If you were feeling daring, you could delete the entries from the underying Oracle Text index, which would prevent them being found, but that definitely wouldn't be supported.

How to customize the *Search Help ID* in selecion parameters of FBL5N?

Hi All,
I'd like to know if is possible to customize the Search Help ID in the selecion parameters of FBL5N
Thanks for Your Help
G.

Yes, you can
Please go to OB49
select tab included search help
here you can assign
please read img activity documentation for further help.
Rgds
Murali. N

How to add the search help in Screen programming "F4" help

i add the input field
se51 --> layout and now want to add the search help with these field,
please help me... in this way.

Looks like u r a novice in Mp programming.
Please look at some demo programs in SAP which can teach u the basics of Module Pool programming . Use Demo* in se38 and search first in sap and then in some other sites.
The above thing can be done in Process on value request .
Br, vijay.

How to change the search help in the standard table?

Hello Experts,
Due to service package installation the search help in standard table (VBAP) field (KDMAT) was changed from Collective search help (VMCV) to elementary search help (VMCVA).
Now I need to change the elementary search help to Collective search help, without taking the Access Key.
Please suggest me the appropriate solution

hi
In SE11, go to the change mode of the collective search help and add the elementary search help, in the INCLUDED SEARCH HELPS tab.for including elementary search help, you just have to enter the name of search help along with its parameter in collective search help
system autimatically takes selection method and dialog from elementary search help
regards
Prashant

How to do a Search help on SAP structure field listing custom table data?

i have a SAP screen (Trans KE52) that they want to have a drop down (search help on).
The drop down should list values from a custom table.
How do you do this?
The values to be displayed are NOT from a structure table but from a transparent table. i believe I will need a search FM to do this but not sure how it is to be done.
Any one have ideas?
Thanks!
Scott

Hi Scott,
You need to go to SE11 and look for a searh help that match your requirment or build one.
In case you are going to develop one, in the definition tab of the search help look for the selection method and put in the input field the name of your transparent table.
After that you must specify the fields that you need to appear at the list and the one that is going to be selected for your field. This step you have to do it on the search help parameter grid.
Regards,
Eric
PD. Reward points if this was helpful

How to restrict the modification of a process form field.

Hi,
Is there a way out to restrict the modification of a process form field.
I have a process form field loginid which can not be updated in a target. I want to achieve the same in OIM. I have not created any update task for the field but if the user changes the loginid field then it is getting saved in the OIM database and hence any operation thereafter is falling.
Thanks

Hi Kevin.
I really appreciate your help.
But I tested your configuration in our environment and it doesn't work. The same error (The Resource has not been configured properly) is displayed when I try a provisioning for that resource. Anyway, we could not use this configuration here, because end-users shall have the option to change some values in their process form.
I don't know why, but seems that when I define any field as Display-Only, the prepopulate adapter runs in a post-insert schedule and a error is given cause it try to fulfill a display-only field, which is not allowed.
I try an alternative configuration, which works properly:
- keep the field User ID as Text Field.
- use the prepopulate adapter to populate this field with the User Login (previously defined in the User Definition form)
- delete the property "required = true" to this field
- set property "visible = false" to this field
In this way, the end-users can modify the other fields, except User ID. Otherwise, they never will can see their own User IDs while making a request. For new users it will not be a problem because their User Login (on User Definition) and User ID (on Process Form) will be exactly the same, but for users that already exists in the target system, this values will be different which can originate small issues.
Until achieve an understanding about why a display-only field can not be filled by an pre-populate adapter, I will use this setting above.
Regards.

How we restrict the TECO fucntion without service entry sheet for PM03 cont

Dear PM Guru's.
one of my client asking to restrict the TECO function if there is no cost in order either by external service cost or internal service cost? If user raise an order for one external activity , he not created the service entry sheet against PO and he did TECO of the order, when FI people settles the cost system showing either order is already settled or there is nothing to settle. Please guide me how to restrict the user to do the teco function in order. Its very crucial and urgent for me. if any one have solution please update it immediately.
regards
Jalu

IWO10004 Maintenance order: Customer check for order completion
Use the above user exit to check the cost for the order. If there is no cost, then give error message.
You can check tables PMCO and AUFK.
Also you can use function module PM_WORKORDER_COSTS_LIST to retrieve the actual cost values.

How to restrict the search help given to a field for a specific program ??

Similar Messages

Maybe you are looking for