How to retain the presentation variable values for Dashboard Prompt

I've a dashboard prompt with date and two other drop down field, with default value as yesterday's date set for date and All Values set for other two drop down list. Presentation Variables are D1, P1 and P2 respectivilly
I'm using GO URL from "Report A" and passing presentation variable to navigate to other report (Report B) that works fine. eg:
'<a href = saw.dll?GO&path=/shared/Reports/ABC/ReportB&Action=Navigate&p0=1&p1=eq&p2="-%20Time"."Next%20Day"&p3=@{d1}>Test</a>'
From Report B I'm using Dashoard URL to go back to Previous Report like:
<div class="XUIPromptEntry minibuttonOn">
Return to Previous Screen</div>
This also works fine.
My problem is that, when users selects different values in the Main dashboard prompt for date and other other two drop down and navigates to other report (Report B), and from Report B, when user returns to previous screen (Main Dashboard), Prompts values gets refreshed to original default values.
Is there any way to retain the values of presentation variable in dashboard Prompt when I return to main dashboard from Report B?
I'd appreciate your help.
Thanks

Change your dashboard url include the column and column value for the date column sample shown below,
[a href=saw.dll?Dashboard&PortalPath=/shared/sample/_portal&page=pagename&Action=Navigate&col1=Dim.Date&val1=@1>Return to Previous Screen[/a>
In my second report Date is the first column so I referenced it's value as @1 in the dashboard URL
note: replace [ with <
Thanks,
Vino

Similar Messages

How to use the same variable value for data entry and the planning sequence

Hi,
the scenario is the following:
Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
Ravi Thothadri

How Can i retain the Shared Variable Values after PC rebooting

Hi all,
I am facing a paculiar problem with Shared Variables. I have an application in which shared variables are used for data communication.
One of the application requirement is to retain the variable values eventhough PC is rebooted or started after crashing.
As per the my understanding, the variable values will retain eventhough the PC is rebooted. But here i can observe a paculiar problem like some library variables are retaing the values while some others not. I enabled logging for all the variables.
I tried many ways. like logging enabled, logging disabled, changing variable names, changing process names etc... But i am not getting a consistent behaviour.
I hope some you can help me in solving this issue.. "How Can i retain the Shared Variable Values after PC rebooting"
Thanks and Regards,
Mir

Hi Blackperl,
Thanks for the post and I hope your well.
What do you mean by not getting consistent behaviour.. this will all depend on excatly when the crash happens i.e. before the write or after.
Surely a better method would be to log the data to a file during the reboot...
I beleived the value read back
will be the default value for the shared variable's data type.
The LabVIEW DSC 8.0 module adds more functionality to the shared variable, including initial values and alarms.
If you enable an initial value on a shared variable, when the variable
engine comes back on-line it will default to this value. Setting a bad
status alarm for the shared variable is also a good way of handling
this type of event. Additionally, if you are using a LabVIEW Real-Time
target such as Compact RIO or Compact FieldPoint, it is appropriate to
consider hosting the shared variable engine on the real-time target.
These devices have watch-dog capabilities and are typically the
hardware controlling the critical pieces of an application. Most
Windows or PC-based targets do not have these fail-safes.
I guess, if you could explain to me again that would be great. From my point of view, if I have a cRIO and a Windows PC. If the windows PC crashes, the cRIO will still update its shared variables. Then once the PC has started up its own shared variable engine, and the bindings are loaded, it will once again continue to update its copies of the variables.
Please let me know what you think,
Kind Regards,
James.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to get the session variable value in JSF

Hi
This is Subbus, I'm new for JSF framewrok, i was set the session scope for my LoginBean in faces-config.xml file..
<managed-bean-name>login</managed-bean-name>
<managed-bean-class>LoginBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope> like that...
So all parameter in LoginBean are set in session right ?... for example i used userId is the Parameter...
Now i need to get the the userId parameter from that session in my another JSP page.. how i get that ?..
Already i tried
session.getAtrribute("userId");
session.getValue("userId");
but it retrieve only "null" value.. could u please help me.. it's very urgent one..
By
Subbus

Where i use that..is it in jsp or backend bean...
simply i use the following code in one backend bean and try to get the value from there bean in the front of jsp page...
in LogoutBean inside
public String getUserID()
 Object sessionAttribute = null;
 FacesContext facescontext=FacesContext.getCurrentInstance();
 ExternalContext externalcontext=facescontext.getExternalContext();
 Map sessionMap=externalcontext.getSessionMap();
 if(sessionMap != null)
 sessionAttribute = sessionMap.get("userId");
 System.out.println("Session value is...."+(String)sessionAttribute);
 return (String)sessionAttribute;
 return "fail";
JSP Page
<jsp:useBean id="logs" scope="session" class="logs.LogoutBean" />
System.out.println("SS value is ...."+logs.getUserID());
but again it retrieve only null value.. could u please tell me first how to set the session variable in JSF.. i did faces-config only.. is it correct or not..
By
Subbus

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

How to have the BIND variables value using the TKPROF utility.

WE have a JAVA application and Oracle 9i database.We need to figure out what all select/update/insert sql staements are firing if i am doing one complete processing in my JAVA front application.
Initally I have planned for using TKPROF utility after makeing AUTO_TRCE=TRUE in the database.But the problem is that all select/insert/update sql statements are using the BIND variables in the JAVA code and same is coming/printing on the trace file also.
can we print out the BIND variables values also,while making the TRACE ON?
eg: trace is generaitng the all insert statements like below.
insert into TEST(Column1,Column2) values(:1,:2);
I want to know the value of :1 and :2 bind variables.
If you have any cluse about it please let me know.
Mitesh Shah

Thanks Guys,
I got the BIND variable values in the TRACE file.Previously i was searching on the OUtputfile.
I am pasting the same trce file format.Can you please verify it.Is i am looking the correct file and corect location.
PARSING IN CURSOR #2 len=1571 dep=0 uid=66 oct=3 lid=66 tim=18446744071740803342 hv=1462188955 ad='123434f0'
SELECT PARENTIDKEY,CONTRACTKEY,COMPANYKEY,BACKENDKEY,DATAREP,BANKHOLDINGID,BANKID,CARRIERPARTYID,PRODUCTID,ID,PREMIUMINDEXRATE,ILLUSTRATEDMATURITYLOW,ILLUSTRATEDMATURITYHIGH,SPECIALHANDLING,CARRIERCOMMCODE,MONEYTRANSFERTYPE,FIRSTBILLSKIPMONTH,CONTESTABILITYENDDATE,DEDUCTIONDATE,MARKETVALADJUSTIND,FREEAVAILABLEAMT,ADVANCINGREJECTEDIND,RATEDIND,OTHERINSUREDIND,ENDORSEMENTIND,BENEFICIARYIND,CASECONTROLNUMBERASSUMING,OWNERLEGALNAME,STAMPDUTY,COMMISSIONANNUALIZEDIND,NONSTDCOMMTAKEN,LAPSETAXABLEGAIN,GOVTALLOTMENTSUSPENSEACCTAMT,LASTNOGOODCHECKREASON,LASTNOGOODCHECKDATE,LASTCOIDATE,LASTDEDUCTEDEXPENSECHARGES,LASTDEDUCTEDCOICHARGES,STATEMENTBASIS,LASTNOTICETYPE,LASTNOTICEDATE,PAYMENTDUEDATE,LASTBANKCHANGEDATE,EFTENDDATE,BANKBRANCHNAME,BANKNAME,PAYMENTDRAFTDAY,BANKACCTTYPE,CREDITCARDTYPE,CREDITCARDEXPDATE,ACCTHOLDERNAME,ROUTINGNUMBER,ACCOUNTNUMBER,PAYMENTMETHOD,ANNUALPAYMENTAMT,PAYMENTAMT,PAYMENTMODE,LASTCOIANNIVDATE,BILLINGSTOPDATE,BILLEDTODATE,FINALPAYMENTDATE,GRACEPERIODENDDATE,PAIDTODATE,STATUSCHANGEDATE,REINSTATEMENTDATE,TERMDATE,ISSUEDATE,EFFDATE,DOWNLOADDATE,DURATION,POLFEE,POLICYVALUE,COMMISSIONROLLOVERPCT,COMMISSIONOPTIONSELECTED,REPLACEMENTTYPE,CUSIPNUM,CONVERTTOPRIVATEIND,PORTABILITYIND,REINSURANCEIND,BILLNUMBER,JURISDICTION,ISSUETYPE,ISSUENATION,STATUSREASON,PRIORPOLICYSTATUS,POLICYSTATUS,SHORTNAME,ADMINISTERINGCARRIERCODE,PLANNAME,FILEDFORMNUMBER,FORMNO,CARRIERCODE,PRODUCTCODE,PRODUCTTYPE,LINEOFBUSINESS,CERTIFICATENO,POLNUMBER,CARRIERADMINSYSTEM FROM "POLICY" WHERE PARENTIDKEY = :1 AND CONTRACTKEY = :2 AND COMPANYKEY = :3 AND BACKENDKEY = :4
END OF STMT
PARSE #2:c=0,e=1298,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=0,tim=18446744071740803336
BINDS #2:
bind 0: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
bfp=082a5a9c bln=4000 avl=09 flg=05
value="Holding_1"
bind 1: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
bfp=082a4af0 bln=4000 avl=10 flg=05
value="DUL001138U"
bind 2: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
bfp=069bb890 bln=4000 avl=02 flg=05
value="00"
bind 3: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
bfp=069ba8e4 bln=4000 avl=04 flg=05
value="CLIF"
**********************************************************************************

Using presentation variables selected in dashboard prompt in query builder

In dashboard prompt I have made four dropdowns(have four presentation variables) and based on these values selected,can the Query Builder generate dynamic reports based on the presentation variables selected?
I will provide the link(i.e Link of BI publisher where I stored the report) displayed to the user based on Four presentation variables.
If we click on that link can we use the presentation variables in where clause of Query Builder in BI Publisher?
Please help me out
Thanks in Advance

- OK. In the second prompt, instead of setting Default to SQL Results, set it to Specific Value.
- Then insert '{pres_var}' in the window. I got it to work this way.
- It supplied the PV as the default in the second prompt after hitting "Go" on the first prompt.
Hi, thanks for your suggestion but I don't need to have the value of the presentation variable itself as the prompt default. The variable is a filter for a specific SQL clause and the default is the result of this SQL.
Cheers
DrPlexi

How to pass the bind variable value to the sql statement of the LOV

Hi,
I am using Forms 10g builder.
I have a text item which will be populated by a LOV when i press a button, but i have a bind variable in the SQL statement of the LOV. That bind variable should be replaced by a value which is derived from a radio group in the same data block.
For Ex: ( )radio1 ( )radio2
before i click on the push button, I'll select one of the radio button above,so my question is how to assign this radio group value to the bind variable in the sql statement in the LOV?
Pl any hint is appreciated!
Thanks
Reddy

The variable can be taken into account in the SELECT order contained in the Record Group used by the LOV.
e.g. Select ... From ... Where column = :block.radio_group ...Francois

Problem in retaining the array of values for entire session !!!

Hi,
I have a form with multi record block. When user inserts a new line each time , this value should be compared with the previous entered values.
For this , I tried with the PL/SQL table. Whenever I am coming out of each line after insertion into forms, I am trying to store that values into PL/SQL table. I wrote a procedure to store the value. I am calling this in "new record Instance".
I need this value in the "Validate item trigger" to compare each new line insertion with the old values which is already stored in Pl/SQL table.
Now my problem is after storing into PL/SQL table, I am not able to use this values in "Validate item trigger". Because the value stored in the table are getting erased.
Can you please help me how can I solve this problem. The vaues should retained for a entire session. Its urgent.
Thanks
Alaka

Hi,
I have already created Package and procedures in it. Declared PL/SQL table in the package specification as a global.
I am using one procedure to insert into the PL/SQL table which, I am calling in "New record Instance".
Created another procedure to fetch that value for validation in "When Validate Item" trigger.
This is not working for me, even though I declared PL/SQL table as global.
Please suggest If anything wrong in this.
Thanks
Alaka

How to set the parameter ID value for a range

I am trying to call transaction KSB1 (Display actual line items for cost center) by supplying all the default values for the selection options/parameters and skipping the selection screen from the calling program. However, for the cost center range, both HIGH and LOW field have the same PID (i.e. KOS). Same thing for the cost element range. When I set the value for PID "KOS", only the low value got populated.
I tried to pass a BDC table to the
CALL TRANSACTION 'KSB1' USING bdc_tab
, but the PID used before takes higher priority so the bdc_tab values got overwritten by the PID values for those fields.
Does anybody know how to find or set the PID for a selection range? I need PID for Cost center range, cost element range and the period (PID="VPE").
Any advice is appreicated. Thank you
Minami

otherwise try to make use of SUBMIT command.
Hi Preetahm ,
KSB1 is a Report , not a Tcode to maintain master data or any thing like that ?, u can also cross check?
by using SUBMIT command u have to RKAEP000 this program along with the selection screen.
regards
Prabhu
Message was edited by: Prabhu Peram

How to get the present And Absent for Empoyee for any date..

Hi Experts,
I have a requirement to find the present and absecnt of any PERNR value from Infotype 2002 in the Program For a particular Date..

hai lakhan,
By Using rp_read_all_time_ity pn-begda pn-enda macro you eill get all the absence details.
Reward Points if usefull.
Thanks & Regards.
Shiva

How to Change the default Search value for Field Role?

HI,
I went through numerous threads on how to default the search value , but does not help for my issue. Hence im posting this new thread. Please provide your suggestions on how to achieve this.
For the Ship-to party field (in item detail ) on webui when i do a F4 help i get the pop up with various search criteria and for the field Role the default value is "Ship-to party". which is visible. we need to change this default value to Prospect which is available in drop down.
The attribute is STRUCT.ROLE and view BP_HEAD_SEARCH/SearchHelp . The method GET_DQUERY_VALUEHELPS from the context node class is called to fill the value help for this attribute, but i dont understand how the ship-to party is filled as default. There is no code in this method to default the value.
The generic GET_V_S_STRUCT method also does not default the Ship-to party on this field.
I want to understand how this Ship-to party is filled by default and how can i change this to prospect..
Many Thanks,
Shaik

We had a same requirement of defaulting Sales org and division in search criteria for a specific value.
this can be doen by redefining "DO_PREPARE_OUTPUT" method in IMPL class for the respective view.
See the code:
METHOD do_prepare_output.
*CALL METHOD SUPER->DO_PREPARE_OUTPUT
** EXPORTING
**    iv_first_time = ABAP_FALSE
DATA:
    lr_qs TYPE REF TO cl_crm_bol_dquery_service.
* Get current query object
lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
IF iv_first_time = abap_true.
    lr_qs->clear_selection_param_values( ).
    lr_qs->delete_empty_selection_params( ).
*   if l_sales_orgs is initial.
    CALL METHOD lr_qs->insert_selection_param
      EXPORTING
        iv_index     = '1'
        iv_attr_name = 'SALES_ORG'
        iv_sign      = ' '
        iv_option    = 'EQ'
        iv_low       = 'O 50000514'.
*   endif.
*   if l_dist_chan is initial.
    CALL METHOD lr_qs->insert_selection_param
      EXPORTING
        iv_index     = '2'
        iv_attr_name = 'DISTR_CHAN'
        iv_sign      = ' '
        iv_option    = 'EQ'
        iv_low       = '01'.
* endif.
Hope this will help..
THanks & Regards,
Amit

How to set the default context value for flexfield in OAFramework pages

Hi,
I have a page which contains a contexxt value field i.e Flexfields
To select the context value we have to select the value from drop down
So Here we want to display the context value immediately when the page is called
How to set the default valu in this case
Regards,
Krishna

You can set the Attribute category view attribute to the Flexfield context value and call prepareforRendering in the flex bean. Check the dev guide for details.
Regards
Sumit

How to check the default checked value for radio button on jsp for struts

Hello , I just want to check the default checked value in JSP for a radio button, how can i do that?
<html:radio property="sale" value="permanent" style="vertical-align: middle;">Permanent</html:radio>
<html:radio property="sale" value="temporary" style="vertical-align: middle;">Temporary</html:radio>

you can set the default value for property ( which you want to default selected when the form is first loaded) in reset method of the form.
<html:radio property="sale" value="permanent" style="vertical-align: middle;">Permanent</html:radio>
<html:radio property="sale" value="temporary" style="vertical-align: middle;">Temporary</html:radio>
In the above case you can write the code as follows in the perticular form of this jsp.
public void reset(ActionMapping mapping, HttpServletRequest request) {
super.reset(mapping, request);
sale = "permanent";
This will show the first check box default selected when the first time the page is loaded.

How to retain the presentation variable values for Dashboard Prompt

Similar Messages

Maybe you are looking for