How to retract data from BPC Netwaver to SAP R/3

Hi all,
I have three questions concerning the retraction of data from BPC to R/3:
1)Can someone explain me how i can send data from BPC to R/3 (via SAPBI)??
2)What's a better choice => Can i do this from an infocube or a DSO?
3)And what is the role of the BAPI's "BAPI_0050_CREATION" and "BAPI_TRANSACTION_COMMIT"
Or are those not important?

hi,
The push principle shows a workaround to start an extractor from the source system.... for this you can try APDs (esp for CRM system)and open hub destinations(OH).
or
  kindly refer to below document which describes about the COPA retraction as an example for the same
http://tleterme.developpez.com/bw/how/HowTo_COPA_Retraction.pdf
also below thread explain that in detail about retractionand has diff links that might be helpful to you
Retractors to SAP ECC from SAP BI
regards
laksh

Similar Messages

  • Retract data from BPC 10.0 to ECC

    Hi All,
    We are attempting to retract data from netweaver BPC 10.0 to ECC.  We have followed the how to guide (How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting,)  which details steps for version 7.5. 
    We have attempted to implement the transport in the appendix of this guide which implements class ZCL_BPC_RTRCT_SUPERCLASS.  This transport fails as it is missing method GET_APPL_DATA.  Has anyone had any experience with this class in 10.0, or even 7.5?  Alternatively, does anyone have guidliness for implementing retractionto ECC in BPC 10.0?
    Many thanks,
    James

    Hi Rich,
    In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
    For this retraction we are following below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
    In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
    as it is Z class, i am unable to create in my system.
    could you please help me.

  • How to retract data from SRM 5.0 to BPS 7.1

    Hi eveybody,
    I need to retract the changed data from BPS (BW 7.1) to SRM 5.0.
    I am novice to BW-BPS.
    If there is no standard retractor, what is the solution?
    Can anyone send me documentation , links or steps by steps guide to explain how to do the link please?
    Thanks in advance for your help.
    I'll surely assign points if one can help me.
    My mail is [email protected]
    Nevil

    sorry, i made a mistake in the subject.It shall be :
    How to retract data from BPS 7.1 to SRM 5.0

  • How to extract data from BPC InfoCube via ABAP program?

    Hi experts!!
    I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
    I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
    Is there any difference between extracting data from BPC and standard InfoCubes?
    Thank you all!

    Moderator message - Welcome to SCN.
    But please do not cross and duplicate post.
    Thread locked.
    Rob

  • How to extract data from ODS to non-SAP system

    Hi,
    Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
    Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
    The non-SAP system is an unix system.
    Thanks in advance
    Ella

    Ella,
    You can look at it from the concept of a BADI / Infospoke
    Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
    Hope this helps...
    Arun
    Assign points if it helps

  • IDOC :: how to send data from Custom Infotype in SAP HR to third party

    Hi,
    I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
    Please help me in doing it.
    I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                    ZTALENT                        Talent Management                                                                               
    5  E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)                                                                               
    5  E1PITYP                        HR: Transported Infotypes and Subtypes for an Object                                                                               
    ZPUSER                         User base Data File                                          
                    ZPERSON                        Personal Information File Segment                            
                    ZPOST                          Position File                                                
                    ZOPE                           Overall Performance                                          
                    ZPWORK                         Outside Work Experience                                      
                    ZPEDUC                         Education Details of Employee                                
                    E1P0000                        HR: HR Master Record Infotype 0000 (Actions)                 
                    E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)         
                    E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)           
                    E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)          
                    E1P0022                        HR Master Record: Infotype 0022 (Education)                  
                    E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)   
                    E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)        
                    E1P0105                        HR: HR Master Record Infotype 0105 (Communications)       
                   ZE1P9020
                    ZPLANG                         Language Details                                             
                    ZACTION                        Actions Changes            
    Regards,
    Krishna

    Hello Shankar,
             Technically TEMSE files are read by calling the following 3 function modules in sequence,
                  1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
                  2) RSTS_READ : read the object
                  3) RSTS_CLOSE: close the object
    Regards,
    Rajesh

  • How to bring data from Oracle based Non SAP System to SAP

    Dear Friends,
    I have two servers, one is SAP and the other one is Non SAP with Oracle in backend. Please suggest how to take data from the NonSAP server to SAP server or how to connect the two.
    Please send the step-by-step configuration if possible.
    Thanks in advance,
    Alok.

    Hi
    Step 1: Create an entry for the External database in DBCON table using Trxn: DBCA.
    Table: DBCON (Description of Database Connections)
    Field Name     Description                          Value (For: E.g.:)
    CON_NAME   Logical name for a database connection    RAJ
    DBMS       Database system                           MSS
    USER_NAME  Database user                            <username>
    PASSWORD   Password for setting up the connection   <pwd>/<pwd>
    CON_ENV   Database-specific information             MSSQL_SERVER=depotserver MSSQL_DBNAME=HOF_INDORE
    DB_RECO
    Step 2: Now you can write code to connect to the external database…
    Your Sample code can be something like this……
    FUNCTION-POOL z_houston. "MESSAGE-ID ..
    DATA: BEGIN OF wa,
    c_locid(3),
    c_locname(50),
    c_locstate(5),
    END OF wa.
    FUNCTION z_houston_connect.
    ""Local interface:
    EXEC SQL.
    CONNECT TO 'RAJ' AS 'V'
    ENDEXEC.
    EXEC SQL.
    SET CONNECTION 'V'
    ENDEXEC.
    *- Get the data from MS-SQL Server
    EXEC SQL.
    open C1 for
    select
    loc_id,
    loc_name,
    loc_state
    from ho_loc_mast
    ENDEXEC.
    DO.
    EXEC SQL.
    FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_locstate
    ENDEXEC.
    IF sy-subrc = 0.
    PERFORM loop_output.
    ELSE.
    EXIT.
    ENDIF.
    ENDDO.
    EXEC SQL.
    CLOSE C1
    ENDEXEC.
    ENDFUNCTION.
    *& Form LOOP_OUTPUT
    Output
    FORM loop_output .
    WRITE: /5 wa-c_locid, 10 wa-c_locname, 65 wa-c_locstate.
    CLEAR wa.
    ENDFORM. " LOOP_OUTPUT
    Regards
    Raj

  • How to transfer data from legacy system  to SAP

    Hi Friends,
    I would like to know the process and the steps followed to transfer data from my legacy system to SAP.
    Suppose if i have all the data in the form of Excel sheet or doc type. How can i transfer this data into SAP.
    Please explain the steps followed.
    Appreciate your help
    Anil

    Hi ,
    Conversion of legacy data into SAP can be uploaded using a standard SAP Tool called LSMW ( TCode:LSMW).
    the below link gives a brief explanation of the LSMW tool
    http://tutorialsap.com/abap/sap-lsmw-tutorial-with-steps-to-create.html
    There are various methods to upload data within LSMW. If the number of records are very high like Article Master or  Conditions for Retail the IDOC method must be used.
    Standard IDocs
    1. Article Master - ARTMAS
    2. Conditions - COND_A
    3. Source list - SRCLST
    4. Customer Master or WRF3/WRF6 tables - DEBMAS
    5. Vendor master- CREMAS
    Etc. Use transaction code WE60 to see the structure of each of the idocs. New enhancements can be done for the idocs if the required field is not available.
    Regards
    Prabhu

  • How to send data from WEBI HYPERLINK to SAP R/3

    Can someone please help in sending the data from WEBI to R/3 system.
    We created a universe on top of a BEX Query and on Top of that we created a web intelligence report.
    Now our requirement is when we click on any record in BO web ntelligence report that data should get populated in SAP R/3 system FAGLL03 screen . How to send the data from WEBI to R/3 system.
    Edited by: SAP BPS on Feb 5, 2010 6:23 AM

    Herry,
    You can refer the below docs for reference. Instead of receiver JDBC , you have to use Receiver as R/3.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
    I hope it helps.
    Best regards,
    raj.

  • How to retrieve data from a CGI to SAP?

    Hi guys,
    I'm looking for a way to retrieve information from a CGI page into SAP. This CGI generates a XML with the response from the parameters I use on the URL.
    I can xsl transform the result into ABAP variables, but first I need to know how to get that information.
    As anyone come across this or knows how to do it?
    Thanks in advance,
    Ricardo

    Hi,
    In your case, Include prog is part of FM, no need to treat it as an Entity.
    Now, Your Answer -
    In SCRIPT - IN Page Window -->
         PERFORM GET_MVAT_TIN IN PROGRAM Z_SCRIPT_PERFORMS_ABAPDB3
         USING &VBDKR-KUNRE&
         CHANGING &STCD1&
         CHANGING &STCD2&
         ENDPERFORM
         IF &STCD1& <> ' '
         <B>MVAT Number :</> &STCD1&
         ENDIF
    Then go to SE38 --> Creat prog with type - Subroutine pool
    In that Write FORM statement for this PERFORM.
    FORM get_mvat_tin TABLES inttab STRUCTURE itcsy
                             outtab STRUCTURE itcsy.
      DATA : v_kunre TYPE kna1-kunnr,
             v_stcd1 TYPE kna1-stcd1,
             v_stcd2 TYPE kna1-stcd2.
      LOOP AT outtab.
        CLEAR outtab-value.
        MODIFY outtab.
      ENDLOOP.
      READ TABLE inttab INDEX 1.
      v_kunre = inttab-value.
      IF v_kunre CA sy-abcde.
      ELSE.
        UNPACK v_kunre TO v_kunre.
      ENDIF.
       " Here You can take your Funcion module ***************************
      SELECT SINGLE stcd1 stcd2 FROM kna1 INTO (v_stcd1, v_stcd2)
                                         WHERE kunnr = v_kunre.
      IF sy-subrc = 0.
        READ TABLE outtab INDEX 1.
        WRITE v_stcd1 TO outtab-value.
        MODIFY outtab INDEX 1.
        READ TABLE outtab INDEX 2.
        WRITE v_stcd2 TO outtab-value.
        MODIFY outtab INDEX 2.
      ENDIF.
    ENDFORM.                                

  • How to import data from legacy system to SAP

    How do we import legacy data to SAP system? Iu2019m a trainee on SAP HR,  just wanted a brief description on that in layman terms?
    There are lot of threads related to issue  please use Search forum for Better results before posting the query search the forum for better prospects

    Hi ,
    Conversion of legacy data into SAP can be uploaded using a standard SAP Tool called LSMW ( TCode:LSMW).
    the below link gives a brief explanation of the LSMW tool
    http://tutorialsap.com/abap/sap-lsmw-tutorial-with-steps-to-create.html
    There are various methods to upload data within LSMW. If the number of records are very high like Article Master or  Conditions for Retail the IDOC method must be used.
    Standard IDocs
    1. Article Master - ARTMAS
    2. Conditions - COND_A
    3. Source list - SRCLST
    4. Customer Master or WRF3/WRF6 tables - DEBMAS
    5. Vendor master- CREMAS
    Etc. Use transaction code WE60 to see the structure of each of the idocs. New enhancements can be done for the idocs if the required field is not available.
    Regards
    Prabhu

  • Best practice for retraction of data from BPC 10.0 to General Ledger

    Hi All,
    I have the requirement to retract data from BPC 10.0 to General Ledger.
    What is the best practice for doing this?
    I have read the "How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I", but this is prepared to transfer data to Cost Center accounting. Will General Ledger be populated automatically?
    What is your opinion on this?
    Best regards,
    JA

    Hi Rich,
    In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
    For this retraction we are following below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
    In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
    as it is Z class, i am unable to create in my system.
    could you please help me.

  • Retraction cost center plan data from BPC to ECC

    HI Experts,
    We are integrating BW-BPC.
    The client wants to Retract the data from BPC to ECC System for reporting purposes.
    u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC.
    The data needed is the planning data on cost centers which are currently entered into SAP manually via transaction KP06. This data will now be entered into BPC instead and therefore it is required to get an interface between BPC and SAP ECC for transferring data.
    A description of the process and the data needed is available in the section u201CSAP ECC Screen Dumpu201D sectionu201D including screen dumps from ECC
    If this interface is not created the task of entering in the planning data will double as the data must be entered both in BPC and SAP ECC. The process of entering in the data twice I estimate will add 1 u2013 2 extra days of work for each subsidiary involved in this.u201D
    What is the options to support this Business Process of getting data from BPC to SAP ECC.
    Regards
    venu
    Edited by: venu WAD on Aug 19, 2011 7:19 AM
    Edited by: venu WAD on Aug 19, 2011 10:17 AM

    Hi Keyrun:
    Please refer to slide 7 of document below.
    "SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
    >Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
    >See SAP Note 525543 for additional documentation on field mapping.
    Regards,
    Francisco Milán.
    Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

  • I need how to load data from MS Excel(csv format) to NW Excel

    Hi,
    I am doing Migration project from SAP MS to NW Manually.
    I need how to load data from MS excel (csv format) to NW excel .
    For example 2008 budget data.
    Could you please help me in this.
    Thanks and Regards
    Krishna

    Hi,
    You need to create a transformation file and a conversion file if required. First upload the excel (csv) file into BPC using Manage Data and Upload File option.
    Create the transformation file (refer to the sap help  on how to define a transformation file). You need to specify the mapping correctly and include all your application dimensions and map them to appropriate columns of the flat file.
    Before running the import package, do validate the data in the flat file you uploaded into BPC with the transformation file you created.
    Thanks,
    Sreeni

  • Badi: move data from bpc cube to bw cube

    Hi friends,
    I would like to move data from bpc application(i.e bpc cube) to bw cube.  Bpc cube having infoobjects starting with /cpmb/* and bw cube having infoobjects starting with y* .
    I want to write badi code to move data from bpc cube to bw cube? is it possible to move data via badi in our case?
    I know through APD its possible to move.  Any suggestions pls. we are on bpc 75 nw sp04
    Thanks,
    naresh

    Hi Naresh!!!
    I am doing the same stuff...... and got the data read inside the BAdI and converted the comma seperated into a properly structured table... but i dont know how to send this field symbol structure to a normal table. can you help me!!!!??? can you give me your contact details.... please
    Regards,
    Surya Tamada.

Maybe you are looking for